Hexacyanometalate molecular chemistry: di-, tri-, tetra-, hexa- and heptanuclear heterobimetallic complexes; control of nuclearity and structural anisotropy

Following a bottom-up approach to nanomaterials, we present a rational synthetic route to high-spin and anisotropic molecules based on hexacyanometalate [M(CN)(6)](3-) cores. Part 1 of this series was devoted to isotropic heptanuclear clusters; herein, we discuss the nuclearity and the structural anisotropy of nickel(II) derivatives. By changing either the stoichiometry, the nature of the terminal ligand, or the counterion, it is possible to tune the nuclearity of the polynuclear compounds and therefore to control the structural anisotropy. We present the synthesis and the characterisation by mass spectrometry, X-ray crystallography and magnetic susceptibility of bi-, tri-, tetra-, hexa- and heptanuclear species [M(CN)(n)(CN-M'L)(6-n)](m+) (with n=0-5; M=Cr(III), Co(III), M'=Ni(II); L=pentadentate ligand). Thus, with M=Cr(III), d(3), S=3/2, a dinuclear complex [Cr(III)(CN)(5)(CN-NiL(n))](9+), (L(n)=polydentate ligand) was built and characterised, showing a spin ground state, S(G)=5/2, with a ferromagnetic interaction J(Cr,Cu)=+18.5 cm(-1). With M=Co(III) (d(6), S=0) were built di-, tri-, tetra-, hexa and hepanuclear CoNi species: CoNi, CoNi(2), CoNi(3), CoNi(5) and CoNi(6). By a first approximation, they behave as one, two, three, five and six isolated nickel(II) complexes, respectively, but more accurate studies allow us to evaluate the weak antiferromagnetic coupling constant between two next-nearest neighbours M'-Co-M'.     

MnIII2 (5-Rsaltmen)2NiII(pao)2(L)]2+: an S(T)=3 building block for a single-chain magnet that behaves as a single-molecule magnet

Mn(III)-Ni(II)-Mn(III) linear-type trinuclear complexes bridged by oximate groups were selectively synthesized by the assembly reaction of [Mn2(5-Rsaltmen)2(H2O)2](ClO4)2 (5-Rsaltmen2-=N,N'-(1,1,2,2-tetramethylethylene) bis(5-R-salicylideneiminate); R=Cl, Br) with [Ni(pao)2(phen)] (pao-=pyridine-2-aldoximate; phen=1,10-phenanthroline) in methanol/water: [Mn2(5-Rsaltmen)2Ni(pao)2(phen)](ClO4)2 (R=Cl, 1; R=Br, 2). Structural analysis revealed that the [Mn(III)-ON-Ni(II)-NO-Mn(III)] skeleton of these trimers is in every respect similar to the repeating unit found in the previously reported series of 1D materials [Mn2(saltmen)2Ni(pao)2(L1)2](A)(2) (L(1)=pyridine, 4-picoline, 4-tert-butylpyridine, N-methylimidazole; A=ClO4-, BF4-, PF6-, ReO4-). Recently, these 1D compounds have attracted a great deal of attention for their magnetic properties, since they exhibit slow relaxation of the magnetization (also called single-chain magnet (SCM) behavior). This unique magnetic behavior was explained in the framework of Glauber's theory, generalized for chains of ferromagnetically coupled anisotropic spins. Thus, in these 1D compounds, the [Mn(III)-ON-Ni(II)-NO-Mn(III)] unit was considered as an S(T)=3 anisotropic spin. Direct-current magnetic measurements on 1 and 2 confirm their S(T)=3 ground state and strong uniaxial anisotropy (D/k(B) approximately -2.4 K), in excellent agreement with the magnetic characteristic deduced in the study on the SCM series. The ac magnetic susceptibility of these trimers is strongly frequency-dependent and characteristic of single-molecule magnet (SMM) behavior. The relaxation time tau shows a thermally activated (Arrhenius) behavior with tau0 approximately 1x10(-7) s and Delta(eff)/k(B) approximately 18 K. The effective energy barrier for reversal of the magnetization Delta(eff) is consistent with the theoretical value (21 K) estimated from |D| S2T. The present results reinforce consistently the interpretation of the SCM behavior observed in the [Mn2(saltmen)2Ni(pao)2(L1)2](A)2 series and opens new perspectives to design single-chain magnets.     

High-spin molecules with magnetic anisotropy toward single-molecule magnets

High-spin molecules with easy-axis magnetic anisotropy show slow magnetic relaxation of spin-flipping along the axis of magnetic anisotropy and are called single-molecule magnets (SMMs). SMMs behave as molecular-size permanent magnets at low temperature and magnetic relaxation occurs by quantum tunneling processes; such molecules are promising candidates for use in quantum devices. We first discuss intramolecular ferromagnetic interactions for preparing high-spin molecules. Second, we determine the magnetic anisotropy for single metal ions with d(n) configurations and discuss how molecular anisotropy arises from single-ion anisotropy of the assembled component metal ions.     

Heterodinuclear Lanthanoid‐Containing Polyoxometalates: Stepwise Synthesis and Single‐Molecule Magnet Behavior

Polyoxometalates (POMs) with heterodinuclear lanthanoid cores, TBA₈H₄[{Ln(μ₂‐OH)₂Ln′}(γ‐SiW₁₀O₃₆)₂] ( LnLn′ ; Ln=Gd, Dy; Ln′=Eu, Yb, Lu; TBA=tetra‐n‐butylammonium), were successfully synthesized through the stepwise incorporation of two types of lanthanoid cations into the vacant sites of lacunary [γ‐SiW₁₀O₃₆]^8? units without the use of templating cations. The incorporation of a Ln³⁺ ion into the vacant site between two [γ‐SiW₁₀O₃₆]^8? units afforded mononuclear Ln³⁺‐containing sandwich‐type POMs with vacant sites ( Ln1 ; TBA₈H₅[{Ln(H₂O)₄}(γ‐SiW₁₀O₃₆)₂]; Ln=Dy, Gd, La). The vacant sites in Ln1 were surrounded by coordinating W? O and Ln? O oxygen atoms. On the addition of one equivalent of [Ln′(acac)₃] to solutions of Dy1 or Gd1 in 1,2‐dichloroethane (DCE), heterodinuclear lanthanoid cores with bis(μ₂‐OH) bridging ligands, [Dy(μ₂‐OH)₂Ln′]⁴⁺, were selectively synthesized ( LnLn′ ; Ln=Dy, Gd; Ln′=Eu, Yb, Lu). On the other hand, La1 , which contained the largest lanthanoid cation, could not accommodate a second Ln′³⁺ ion. DyLn′ showed single‐molecule magnet behavior and their energy barriers for magnetization reversal (ΔE/k_B) could be manipulated by adjusting the coordination geometry and anisotropy of the Dy³⁺ ion by tuning the adjacent Ln′³⁺ ion in the heterodinuclear [Dy(μ₂‐OH)₂Ln′]⁴⁺ cores. The energy barriers increased in the order: DyLu (ΔE/k_B=48 K)< DyYb (53 K)< DyDy (66 K)< DyEu (73 K), with an increase in the ionic radii of Ln′³⁺; DyEu showed the highest energy barrier.     

Heterometallic Fe2II–UV and Ni2II–UV Exchange‐Coupled Single‐Molecule Magnets: Effect of the 3 d Ion on the Magnetic Properties

Uranium‐based compounds have been put forward as ideal candidates for the design of single‐molecule magnets (SMMs) with improved properties, but to date, only two examples of exchange‐coupled 3d–5f SMM containing uranium have been reported and both are based on the Mn^II ion. Here we have synthesized the first examples of exchange‐coupled uranium SMMs based on Fe^II and Ni^II. The SMM behavior of these complexes containing a quasi linear {M?O?U?O?M} core arises from intramolecular Fe?U and Ni?U exchange interactions combined with the high Ising anisotropy of the uranyl(V) moiety. The measured values of the relaxation barrier (53.9±0.9 K in the UFe₂ complex and of 27.4±0.5 K in the UNi₂ complex) show clearly the dependency on the spin value of the transition metal, providing important new information for the future design of improved uranium‐based SMMs.     

A family of enneanuclear iron(II) single-molecule magnets

Complexes [Fe₉(X)₂(O₂CMe)₈{(2‐py)₂CO₂}₄] (X^?=OH^? ( 1 ), N₃^? ( 2 ), and NCO^? ( 3 )) have been prepared by a route previously employed for the synthesis of analogous Co₉ and Ni₉ complexes, involving hydroxide substitution by pseudohalides (N₃^?, NCO^?). As indicated by DC magnetic susceptibility measurements, this substitution induced higher ferromagnetic couplings in complexes 2 and 3 , leading to higher ground spin states compared to that of 1 . Variable‐field experiments have shown that the ground state is not well isolated from excited states, as a result of which it cannot be unambiguously determined. AC susceptometry has revealed out‐of‐phase signals, which suggests that these complexes exhibit a slow relaxation of magnetization that follows Arrhenius behavior, as observed in single‐molecule magnets, with energy barriers of 41 K for 2 (τ₀=3.4×10^?12 s) and 44 K for 3 (τ₀=2.0×10^?11 s). Slow magnetic relaxation has also been observed by zero‐field ⁵⁷Fe Mössbauer spectroscopy. Characteristic integer‐spin electron paramagnetic resonance (EPR) signals have been observed at X‐band for 1 , whereas 2 and 3 were found to be EPR‐silent at this frequency. ¹H NMR spectrometry in CD₃CN has shown that complexes 1 – 3 are stable in solution.     

Large Spin‐Relaxation Barriers for the Low‐Symmetry Organolanthanide Complexes [Cp*2Ln(BPh4)] (Cp*=pentamethylcyclopentadienyl; Ln=Tb,Dy)

Single‐molecule magnets comprising one spin center represent a fundamental size limit for spin‐based information storage. Such an application hinges upon the realization of molecules possessing substantial barriers to spin inversion. Axially symmetric complexes of lanthanides hold the most promise for this due to their inherently high magnetic anisotropies and low tunneling probabilities. Herein, we demonstrate that strikingly large spin reversal barriers of 216 and 331 cm^?1 can also be realized in low‐symmetry lanthanide tetraphenylborate complexes of the type [Cp*₂Ln(BPh₄)] (Cp*=pentamethylcyclopentadienyl; Ln=Tb ( 1 ) and Dy ( 2 )). The dysprosium congener showed hysteretic magnetization data up to 5.3 K. Further studies of the magnetic relaxation processes of 1 and 2 under applied dc fields and upon dilution within a matrix of [Cp*₂Y(BPh₄)] revealed considerable suppression of the tunneling pathway, emphasizing the strong influence of dipolar interactions on the low‐temperature magnetization dynamics in these systems.