Redistribution kinetics of isotope molecules due to reversible bimolecular reactions with several atomic channels

Isotope kinetic equations for reversible bimolecular reactions describe the rearrangement of atoms in activated complexes. It has been established from the model reaction CH₄+HCH₃+H₂ that the isotopic homoexchange of methane via two atomic channels is given by one set of equations with different sets of parameters.

---

- . CH₄+HCH₃+H₂ , .

     

Effect of catalyst surface modification on pentachlorobutene-1 oxidation to dichloromaleic anhydride

Modification of V–P–O catalyst surface by reaction products changes the reaction course and increases its catalytic activity in pentachlorobutene-1 oxidation to dichloromaleic anhydride.

---

V–P–O . -1 .

     

Thermoanalytical investigations of silicone caoutchouc polymers and silicone rubbers,I

The investigations proved that isothermal thermogravimetry yields useful information on the thermal stability of silicone caoutchouc and silicone rubber. It was established that the thermal degradation is a first-order reaction. Measurements and calculations verified that in multicomponent systems the resultant degradation curve obtained by isothermal measurements is formed additively from the degradation curves of the components, i.e. the thermal decompositions of the components proceed independently of one another.

---

Zusammenfassung Die isotherme Thermogravimetrie liefert nützliche Informationen über die thermische Stabilität von Silkonkautschuk und Silikongummi. Der thermische Abbau verläuft nach einer Reaktion erster Ordnung. Messungen und Berechnungen haben bestätigt, daß in Vielkomponentensystemen die resultierende isotherme Zersetzungskurve sich additiv aus den Zersetzungskurven der Komponenten zusammensetzt, d. h., daß die thermische Zersetzung der Komponenten unabhängig voneinander verläuft.

---

, . . , , , , . . .

     

Comparative analysis of purity determination methods using a differential scanning calorimeter

Comparative analysis of several methods for purity determination using DSC is presented. This is based on a mathematical model including the construction of theoretical melting curves for two-component systems and the calculation of recorded melting curves with the help of a set of equations describing the formation of a DSC output signal. It is shown that the true accuracy of purity determinations in the range of impurity concentrations ¯x=0.005–0.02 does not exceed 30–50%.

---

Zusammenfassung Eine Vergleichende Analyse verschiedener Methoden zur Reinheitsbestimmung mittels DSC wurde ausgeführt. Diese basiert auf einem mathematischen System, daß die Konstruktion theoretischer Schmelzkurven für Zweikomponentensysteme und die Berechnung von registrierten Schmelzkurven mit Hilfe einer Reihe die Ausbildung des DSC-Signals beschreibenden Gleichungen in sich einschließt. Es wird gezeigt, daß die Genauigkeit der Reinheitsbestimmungen bei Konzentrationen der Verunreinigungen von ¯X₂=0.005–0.02 30–50% nicht überschreitet.

---

, , . , 0,005-0,02 30–50%.

     

Investigation of dehydration process,II

The dehydration of hydrated calcium and strontium bromides and iodides was studied by thermogravimetry and differential thermal analysis. The melting in the crystallization water was distinguished from the dehydration in a self-generated atmosphere. The results of the TG and DTA curves made simultaneously were verified by measurements with a Du Pont DSC apparatus. This latter investigation was extended to the previously studied chlorides too. Correlations were found between the temperature of melting or of dehydration and the ionic radii of the respective cations and anions.

---

Zusammenfassung Die Dehydratisierung von Calcium- und Strontium-Bromid- und Jodidhydraten wurde mit den Methoden der Thermogravimetrie und Differentialthermoanalyse verfolgt. Das Schmelzen im Kristallwasser wurde von der Dehydratisierung in der selbsterzeugten Atmosphäre getrennt. Die Ergebnisse der simultan erhaltenen TG- und DTA-Kurven wurden durch Messungen mit einem Du Pont DSC-Gerät bestätigt, wobei die bereits schon untersuchten Chloride mit einbezogen wurden. Korrelationen zwischen den Schmelzoder Dehydratisierungstemperaturen und den Ionenradien der entsprechenden Kationen und Anionen werden beschrieben.

---

Résumé Etude de la déshydratation des bromures et iodures de calcium et de Strontium hydratés par thermogravimétrie et par analyse thermique différentielle. La fusion dans l'eau de cristallisation a été distinguée de la déshydratation en atmosphère auto-générée. Les résultats des courbes TG et ATD obtenues simultanément ont été vérifiés par des mesures effectuées à l'aide d'un analyseur calorimétrique différentiel (DSC) Du Pont. L'étude a également été étendue aux chlorures précédemment étudiés. On propose des corrélations entre les températures de fusion ou de déshydratation et les rayons ioniques des cations et anions respectifs.

---

, . . . . .

     

Ammoxidation of cyclohexanol to adiponitrile on vanadium oxide

The reaction pathway of ammoxidation of cyclohexanol to adiponitrile (ADN) on vanadium pentoxide catalyst has been investigated. ADN was produced directly via adipic acid obtained from oxidation of cyclohexanone. The main end-products were carbon dioxide and benzene.

---

() V₂O₅. , . .

     

Immobilized sol of cobalt(III) hydroxide as an efficient catalyst of water oxidation to dioxygen by the Ru(bpy)33+ complex

Catalysts of water oxidation to dioxygen by Ru(bpy) ₃ ³⁺ have been obtained by immobilization of colloidal Co(III) hydroxide on supports of the hydroxide types. These supports are found to be able either to enhance (Al(III), Bi(III), Sn(IV) and Ce(IV) hydroxides) or to weaken (Fe(III) and Mn(IV) hydroxides) the catalytic efficiency of the initial sol. The possible nature of the influence of the support is discussed.

---

Ru(bpy) ₃ ³⁺ Co(III). - , ( Al(III), Bi(III), Sn(IV), Ce(IV)), ( Fe(III), Mn(IV)) . .

     

Methods for finding steady-state solutions of mathematical models for chemico-technological schemes

Gradient and Newton methods are suggested for searching for steady-state solutions of chemico-technological schemes to obtain synthetic fuels.

---

- .

     

IR spectroscopic determination of protonation heats of bases on catalyst surfaces

IR spectra of pyridine adsorbed on zirconium phosphate and zeolite HNaY were studied at temperatures of 400–500 K. Protonation heats of pyridine determined on the OH groups of zirconium phosphate and zeolite HNaY having theOH at 3640 cm^–1, are 65±6.0 and 172±16 kJ/mol, respectively.

---

400–500 K , HNaY. OH (Q=65±6, /) OH HNaY cOH 3640 ^–1 (Q=172±16 /).

     

Kinetic model for methanol conversion over Mg-ZSM-5 zeolite

The catalytic conversion of methanol to olefins over ZSM-5 zeolite modified by ion exchange with Mg exhibits an autocatalytic character. On this basis an overall kinetic model of the reaction was proposed which allowed the determination of rate constants and apparent activation energy.

---

ZSM-5, Mg, . , .

     

Liquid-phase hydrogenation of cyclohexene by dihydrogen in the presence of dimolybdenum tetraacetate

Catalytic liquid-phase hydrogenation of cyclohexene in DMF by dihydrogen in the presence of dinuclear bridged complex Mo₂(OAc)₄ has been studied. A kinetic equation for the steady-state rate of cyclohexene hydrogenation and the activation parameters are suggested.

---

Mo₂(OAc)₄. .

     

The maximum kinetic mechanism and rate constants in the H2?O2 system

The maximum (in a combinatorial sense) kinetic mechanism of hydrogen oxidation is defined and the rate constants of all elementary steps are given. The possible error limit is given for each elementary step.

---

( ) . .

     

Kinetics of formation,dissociation and equilibrium constants of pentacyanoaquoruthenate(II) with heterocycles

The kinetics of formation and dissociation reactions of [Ru(CN)₅L]^3– with a series of heterocyclic ligands were studied in aqueous media. In this presence of an excess of heterocycle, the observed second order rate constants were calculated from the k_obs versus [ligand] plot at =0.100m NaClO₄. Activation parameters for the formation reactions (H=28±7kJmol^–1 and S=140±35JK^–1mol^–1) are comparable for all systems, indicating a common mechanism. The kinetics of exchange of coordinated heterocycles for 1,3,5-triazine yielded a rate saturation typical of a limiting dissociative mechanism. Activation parameters of the limiting first order specific rate of dissociation reactions were H=85±7kJmol^–1 and S=18±4JK^–1mol^–1. Equilibrium constants were calculated from the second order rates of formation and pseudo-first order rates of dissociation reaction.     

Thiophene hydrodesulfurization on P?Mo, Si?Mo and Ti?Mo catalysts

Studies of the catalysts obtained by supporting P–Mo, Si–Mo and Ti–Mo heteropolyacids on anatase in thiophene hydrodesulfurization have revealed that the presence of HPA in the initial catalysts promotes the formation of the molybdenum state ensuring high reaction rates. A possibility for HPA synthesis when supporting paramolybdate on TiO₂, accounts for the great effect of the support on the properties of the catalyst.

---

, -, -, - , . , , . .

     

Identification and biological activity of the volatile organic substances emitted by plants and insects II. Sesquiterpene composition of the native scent of leaves of the potatoSolanum tuberosum

By dynamic gas extraction of the volatile components of the native scent of the leaves of the potatoSolanum tuberosum L. growing under natural conditions, followed by the gas-chromatographic separation and massspectrometric analysis of the substances obtained, the following sesquiterpene compounds have been identified:trans-andcis-caryophyllenes, -ylangene, -copaene, -bourbonene, -elemene, Z--farnesene, aromadendrene, -humulene, -elemene, -bisabolene, -cadinene, and -cadinene.Institute of Petrochemistry and Catalysis, Academy of Sciences of the Republic of Bashkortostan, and Ufa Scientific Center, Russian Academy of Sciences. Ufa-450075, Prospekt Oktyabrya, 141, tel./fax 7+(3472) 312750; ink@anrb.ru. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 472–477, July–August, 1999.     

Induction period of the conversion of methanol to hydrocarbons on a nickel loaded faujasite: Evidence for a suppression of the autocatalytic step

The conversion of methanol to hydrocarbons on nickel loaded faujasites can be retarded for many hours time-on-stream. The induction period is interpreted to be due to a suppression of the autocatalytic step of the reaction. An autocatalytic mechanism is proposed based on the -scission of branched carbenium ion intermediates.

---

. . , - .

     

Determination of hydroxyl groups and/or water on the surface of oxide catalysts by a pulse chromatographic method

A pulse chromatographic method based on the reaction of gaseous dimethylzinc tetrahydrofura nate was developed for the determination of surface hydroxyl groups and/or adsorbed water in solid porous materials. The procedure is rapid and gives results comparable to other methods. Some heterogeneous catalysts and supports have been analyzed.

---

, , / , . , . .

     

X-ray studies of interaction between magnesium chloride and ethyl benzoate, components of the catalyst for propylene polymerization

X-ray studies of the interaction between highly dispersed magnesium dichloride and ethyl benzoate (EB) at different molar ratios EB/MgCl₂, and the effect of their grinding indicate that a new compound of MgCl₂ and EB is formed. Grinding destroys the crystal phase of the new compound, thus increasing the activity and stereospecificity of the catalyst obtained.

---

() /MgCl₂, . , MgCl₂. , .

     

Direct reading thermometric analysis

According to the direct reading thermometric method the concentration of the component to be determined is established from the temperature variation of the sample solution obtained on adding to it an excess of a reagent which reacts selectively with the respective component. Under suitably chosen experimental conditions the concentration of the respective component is determined from a single measured value. Since the established measurement technique requires little manual work and the respective components may be determined from the sample solution directly without any separations, the method in its present form is chiefly suitable for rapid serial analyses.

---

Zusammenfassung Bei der thermometrischen Methode mit Direktablesung wird die Konzentration der gesuchten Komponente aus der Temperaturänderung der Probelösung bestimmt, die nach Zugabe eines Überschusses von einem selektiv reagierenden Reagens wahrnehmbar ist.Unter geeigneten Versuchsbedingungen kann man die Konzentration der gesuchten Komponente aus einem einzigen Meßwert, nämlich der Temperaturänderung der Probelösung bestimmen. Da die ausgearbeitete Meßtechnologie wenig Arbeit erfordert und die gesuchten Komponenten ohne jede Trennung direkt bestimmt werden können, ist die Methode in ihrer jetzigen Ausführungsart hauptsächlich zu betriebsmäßigen Serien-Schnellanalysen geeignet.

---

Résumé Selon la méthode thermométrique à lecture directe, on détermine la concentration du constituant cherché d'après la variation de température de la solution échantillon que l'on additionne d'un excès de réactif sélectif de celui-ci. Dans les conditions expérimentales appropriées, une seule mesure suffit pour déterminer la concentration du constituant cherché. Comme la technique de mesure qui a été mise au point demande peu de travail et comme on peut doser sans aucune séparation les constituants étudiés, la méthode dans sa forme actuelle se prête en premier lieu aux dosages en séries industriels.

---

, , . . . , . .

     

Synthesis of the bis(2′-chloroethyl) amide of β-(8-guanyl)propionic acid

The synthesis of -(8-guanyl)propionic acid and its chloride, methyl ester, bis(2-hydroxyethyl)amide, and bis(2-chloroethyl)amide has been effected. The latter readily rearranges under certain conditions into 2-chloroethylaminoethyl -(8-guanyl)propionate.