Electroactive self-assembled biferrocenyl alkanethiol monolayers on Au(111) surface and on gold nanoclusters

The spectroscopic and electrochemical characterizations of electrochemically stable biferrocene-modified Au clusters and chemisorbed biferrocenylalkanethiols on Au(111) surface were studied. The characterizations of biferrocene-modified Au cluster using TEM, UV-vis, and NMR techniques are also reported. Two successive reversible one-electron redox waves were observed for the biferrocenylalkanethiol Au nanoclusters and biferrocenylalkanethiol monolayers on Au(111) surface in the cyclic voltammetry. Furthermore, the positive and negative current peaks for each redox wave occur at almost the same potential, and the peak current increases almost linearly with the sweep rate. Repeat scanning does not change the voltammograms, demonstrating that these monolayers are stable to electrochemical cycling. The coverages of electroactive biferrocene in the monolayers were calculated from the cyclic voltammograms. The standard electron-transfer rate constant was calculated from the splitting between the oxidation and reduction peaks.     

Electroactive self-assembled monolayers on gold via bipodal dithiazepane anchoring groups

Novel dithiazepane-functionalized ferrocenyl-phenylethynyl oligomers 1 and 2 have been synthesized. Self-assembled monolayers (SAMs) of these ferrocene derivatives have been studied by X-ray photoelectron spectroscopy, ellipsometry, and cyclic voltammetry. It has been shown by XPS that monolayers of the dithiazepane-anchored molecules on gold electrodes contain gold-thiolate species. Cyclic voltammetry of the SAMs were characteristic of stable electroactive monolayers even for single-component SAMs of 1 and 2, with the more ideal responses recorded for the two-component SAMs diluted with undecanethiol. The small variation in peak splittings at progressively higher scan rates in these SAMs makes dithiazepane-bridged redox species promising candidates for further studies on molecular wires with bipodal anchoring.     

Blocking behavior of self-assembled monolayers on gold electrodes

Self-assembled monolayers (SAMs) with metal electrodes, especially thiols on gold, are the subject of this investigation because of the unique properties of SAM-modified surfaces. Normal alkanethiols are used to modify the surface of a conventional gold electrode to block certain ions such as Pb(II) and Cu(II) from the surface of the electrode. Normal alkanethiols are also used to study the SAM-gold interfacial adsorption-desorption behavior of the self-assembled monolayer. The effects of varying chain length of SAMs, varying concentration of the alkanethiol solutions, immersion time of the pure gold electrode in the SAM solution, and the stability of a SAM-modified gold electrode in fresh chloroform are investigated using the oxidation-reduction peaks of gold. Conditions that optimize the surface coverage and the uniformity of the SAMs have been determined. Normal alkanethiols proved to be a good insulator on the electrode surface. Received: 16 January 1997 / Accepted: 4 March 1997     

Electrochemical and surface analytical studies of self-assembled monolayers of three aromatic thiols on gold electrodes

Three thiols with three aromatic rings and different structure – terphenyl-4-methanethiol (TPMT), terphenyl-4-thiol (TPT), and anthracene-2-thiol (AT) – have been used to form self-assembled monolayers (SAM) on vapour-deposited and flame-annealed Au films on glass substrates. All three SAMs effectively block the anodic formation of Au oxide, indicating densely packed layers which prevent the access of water and hydrated ions through the organic layer to the metal surface. The film improves its inhibiting properties with duration of exposure to the thiol solutions, reaching completion after 1 hour [1]. The charge-transfer reaction of the Fe(CN)₆ ^3–/Fe(CN)₆ ^4– system is blocked for TPMT films with an insulation of the π-electron system from the Au surface by the methylene group. TPT and especially AT films show the current density of the redox reactions. It is proposed that the charge transfer occurs via the aromatic molecules of the SAMs to the Au surface. Electronic Publication     

Electrochemical characterization of self-assembled thiol-porphyrin monolayers on gold electrodes by SECM.

Herein, the scanning electrochemical microscopy (SECM) approach is applied to study the formation of thiol-porphyrin self-assembled monolayer (SAMs). Using cyclic voltammetry (CV), the formation process is characterized adopting different probe molecules. The observed phenomena indicate that the formation process is affected by solution properties and the molecular structure of the probe molecules. In K(3)Fe(CN)(6) , the SAMs show a strong electron-transfer (ET) blocking effect on a pure porphyrin-modified electrode. However, addition of metal ions to the porphyrin molecules leads to ET. A consistent tendency is observed throughout the modification process using CV and SECM methods. Furthermore, k(eff) values, the apparent heterogeneous rate constants, obtained for different modification periods affirm the validity of these results. SECM images are used to collect surface information in the course of the modification process when the substrate potential is 0.5 V versus Ag/AgCl. The effect of the substrate potential indicates that the oxidation of the porphyrin molecules is supported by more positive potentials because of the similar bimolecular reaction of the porphyrin ring with positive charge and the probe molecules with negative charge.     

Tetraferrocenylporphyrins as active components of self-assembled monolayers on gold surface

Novel tetraferrocenylporphyrins-containing self-assembled monolayers were prepared employing two different approaches. Self-assembled monolayers were characterized using UV-Vis spectroscopy and cyclic voltammetry (CV) whereas their photoelectrochemical properties were investigated by photocurrent generation (PG) experiments.     

Adsorption kinetics of p-nitrobenzenethiol self-assembled monolayers on a gold surface

The adsorption kinetics of octadecanethiol (ODT) and p-nitrobenzenethiol (NBT) from ethanol solutions has been studied by means of contact angle, optical ellipsometry, angle-resolved X-ray photoelectron spectroscopy (ARXPS), and grazing angle attenuated total reflection Fourier transform infrared (FTIR) measurements. ODT data were used as a reference for the kinetics studies of film growth. The growth of self-assembled monolayers from dilute solutions follows Langmuir isotherm adsorption kinetics. A saturated film is formed within 5 h after immersion in solutions of concentrations ranging from 0.0005 to 0.01 mM. The density of the monolayer depends on the concentration of the solution.     

Electrochemical properties of mixed self-assembled monolayers on gold electrodes containing mercaptooctylhydroquinone and alkylthiols

Mixed self-assembled monolayers of 2-(mercaptooctyl)hydroquinone (QH2) and alkylthiols were formed on gold electrodes in EtOH and the redox process of the hydroquinone moiety of QH2 was characterized by cyclic voltammetry (CV) in 0.1 M H(2)SO(4). The monolayers were formed at a series of QH2:alkylthiol ratios and the QH2:alkylthiol ratio in solution was compared to the electrochemical response from QH2 in the obtained monolayer. Mixed monolayers of QH2 with hexylthiol, dodecylthiol, and octadecylthiol were studied. The length of the alkylthiol is crucial for the electrochemical response from QH2 in the monolayer. The total concentration of thiols during monolayer formation and incubation times were also studied and low concentrations of < 2.5 mM and long incubation times gave rise to lower peak separation, lower peak half widths in the CVs of the mixed monolayers, and lower background current. The stability of a pure QH2 monolayer and a 1:4 QH2:hexylthiol monolayer toward high potentials of up to 1.5 V versus Ag/AgCl was also studied and it was observed that the mixed monolayer is significantly more stable than the pure QH2 monolayer.     

An integrated electrochemical fructose biosensor based on tetrathiafulvalene-modified self-assembled monolayers on gold electrodes

An integrated amperometric fructose biosensor based on a gold electrode (AuE) modified with a self-assembled monolayer (SAM) of 3-mercaptopropionic acid (MPA) on which fructose dehydrogenase (FDH) and the mediator tetrathiafulvalene (TTF) are co-immobilized by cross-linking with glutaraldehyde is reported. Variables concerning the behavior of the biosensor were optimized by taking the slope value obtained for the fructose calibration plot in the 0.1–1.0 mM concentration range as a criterion of selection. At an applied potential of +0.20 V, a good repeatability of such slope values (RSD=6.7%, n=10) was obtained with no need to apply a cleaning or pretreatment procedure to the modified electrode. Moreover, results from five different TTF-FDH-MPA-AuEs yielded a RSD of 5.8%. The useful lifetime of one single biosensor was approximately 30 days, exhibiting a 93% of the original response on the 33rd day. A linear calibration graph was obtained for fructose over the 1.0×10^–5–1.0×10^–3 M range, with a limit of detection of 2.4×10^–6 M. The effect of potential interferents was evaluated. The TTF-FDH-MPA-AuE also performed well in the flow-injection mode. The biosensor was used for the determination of fructose in real samples, and the results compared with those provided by using a commercial enzyme test kit.     

Copper(I) pseudorotaxane monolayers assembled on gold electrodes

Two new copper (I) pseudorotaxanes bearing a thioctic acid appended unit have been prepared and deposited onto a gold electrode surface, leading to surface-attached electroactive pseudorotaxanes.     

Molecular self-assembled monolayers of ruthenium(II)-terpyridine dithiol complex on gold electrode and nanoparticles

We describe the formation of stable dithiol-bifunctionalized Ru(II)-terpyridine monolayer onto gold electrode. The coverage-dependent behavior onto gold electrode has been studied by electrochemical technique. The stability, surface charge coverage, and electron-transfer kinetics were assessed by cyclic voltammetry. Functionalized monolayer-protected Au clusters (MPCs) were also prepared. The spectroscopic characterization data of MPCs using UV-Vis and TEM techniques are discussed. TEM images showed that functionalized spherical nanoclusters of 4.7 ± 0.3 and 4.3 ± 0.2 nm were produced. The particle sizes are uniform with a narrow size distribution. The morphology of Au(1 1 1) metal surface modified with MPCs was imaged using atomic force microscopy (AFM). The nanoparticle layer exhibits a distinct surface morphology, irregularly shaped domains with dimensions from 20 to 60 nm and root mean square heights of 2.401 nm.     

Electroactive mixed self-assembled monolayers: A numerical overview of phase segregations

We propose a modeling of phase segregations, inspired by image filtering, and dedicated to electrochemical systems. This original approach is compared to previous experimental results and enhanced with the concepts of 2D segregation and site percolation threshold.     

Second-harmonic spectroscopy of surface immobilized gold nanospheres above a gold surface supported by self-assembled monolayers

We have investigated linear and nonlinear optical properties of surface immobilized gold nanospheres (SIGNs) above a gold surface with a gap distance of a few nanometers. The nanogap was supported by amine or merocyanine terminated self-assembled monolayers (SAMs) of alkanethiolates. A large second-harmonic generation (SHG) was observed from the SIGN systems at localized surface plasmon resonance condition. The maximum enhancement factor of SHG intensity was found to be 3 x 10(5) for the SIGN system of nanospheres 100 nm in diameter with a gap distance of 0.8 nm. The corresponding susceptibility was estimated to be chi((2))=750 pmV (1.8 x 10(-6) esu). In the SIGN system supported with the merocyanine terminated SAMs, the SHG response was also resonant to the merocyanine in the nanogap. It was found that the SHG response of the SIGN systems is strongly frequency dependent. This leads us to conclude that the large chi((2)) is caused by enhanced electric fields at the localized surface plasmon resonance condition and is not due to an increase of the surface susceptibility following from the presence of the gold nanospheres. The observed SHG was consistent with the theoretical calculations involving Fresnel correction factors, based on the quasistatic approximation.     

Electroformation of peptide self-assembled monolayers on gold

The application of a potential to deposit a monolayer of 3-mercaptopropionic acid-histidinyl-histidinyl-histidinyl-aspartyl-aspartyl (3-MPA-HHHDD-OH) controls the density and molecular structure of the peptide monolayer, which results in different wettabilities of the surface, surface density, orientation of the molecule (extended or bent), and nonspecific adsorption of serum proteins. 3-MPA-HHHDD-OH must be deposited at 200 mV to maintain an extended configuration, which promoted low biofouling properties.     

Stripping voltammetry of copper and lead using gold electrodes modified with self-assembled monolayers

One problem associated with using bare solid metal electrodes, such as gold and platinum, in stripping analysis to determine heavy metal ions such as lead and copper ions in dilute solutions is that underpotential deposition (UPD) gives multiple stripping peaks in the analysis of mixtures. These peaks are often overlapped and cannot be conveniently used for analytical purposes. Bifunctional alkylthiols, such as 3-mercaptopropionic acid, with an ionizable group on the other terminal end of the thiol can form self-assembled monolayers (SAMs) on the surface of the gold electrode. It is shown that such an SAM-modified gold electrode minimizes the UPD effects for the stripping analysis of lead and copper. The anodic peak potential shifts and the peak shape changes, indicating that the SAM changes the deposition and stripping steps of these heavy metal ions. Thus, the sensitivity levels for both single species and mixtures can be significantly improved for the conventional solid electrodes. The mechanism of the deposition reaction at the SAM-modified gold electrodes is discussed. Received: 29 May 1997 / Accepted: 24 June 1997     

Electron transfer of horse spleen ferritin at gold electrodes modified by self-assembled monolayers

Electron transfer is known to be an important step in the sequestering of iron by cellular ferritin. In this work, direct electron transfer between ferritin and a gold electrode was performed in order to probe its electron transfer kinetics. Gold electrodes were modified by the formation of self-assembled monolayers of 3-mercapto-propionic acid on the gold surface. Cyclic voltammetry using these electrodes shows that ferritin exhibits slow electron transfer kinetics at low potentials, yet fairly well-defined current—potential curves. In addition, the voltammetry indicates that adsorption of ferritin precedes the electron transfer step. Controlled potential electrolysis measurements yielded an n-value of 1910 electrons transferred per mole of ferritin. Cyclic voltammetry of a solution containing ferritin as well as nitrilotriacetate yields no electrolytic currents at potentials where the iron—nitrilotriacetate complex undergoes redox reactions, indicating that the currents observed in the voltammetry of ferritin were not due to free iron in the ferritin sample. In addition, the voltammetry of iron-free ferritin (apoferritin) did not yield appreciable currents, providing additional support to the suggestion that the observed voltammetric currents were due to the redox reactions of ferritin iron. Self-assembled monolayers containing carboxylate end groups effectively promoted the direct electron transfer of ferritin at a gold electrode, thus demonstrating that the electron transfer mechanisms of ferritin can now be probed electrochemically.     

Separation of pinhole and tunneling electron transfer processes at self-assembled polymeric monolayers on gold electrodes

Self-assembled monolayers of poly(3-alkylthiophene) on gold electrodes are examined by cyclic voltammetry in solutions containing electroactive species. Two well-separated electron transfer processes, namely, electron tunneling through the monolayer and electron exchange at pinholes (defects) of the monolayer are observed. The voltammetric responses of the pinhole electron transfer process take place around the standard potential of the electroactive species and resemble those of a nanoelectrode ensemble of independent individual nanoelectrodes. The voltammetric characteristics of the electron tunneling agree well with predictions of the Marcus theory. Satisfactory values of tunneling coefficient, standard rate constant and organization energy are derived from the voltammetric data.     

Electrochemical characteristics of thin nickel hexacyanoferrate films formed on gold and thiol self-assembled monolayers modified gold electrodes.

Nickel hexacyanoferrate (NiHCF) film was prepared and characterized on gold and thiol self-assembled monolayers (SAMs)-modified gold electrodes. It was found that the film exhibited some different electrochemical characteristics compared with that found on a carbon electrode. In the presence of K+, the film exhibited a redox peak at about 0.5 V. The peak potential shifted linearly with the K+ concentration over the range of about 0.1 mM - 0.1 M with slopes of 54 - 60 mV per log[K+]. However, in solutions containing Na+, Li+ or NH4+ ion the film did not generate well-defined peaks, or even a visible redox peak. Therefore, the film showed a selective potential response to K+. The voltammetric behavior of NiHCF film varied with thiols, the preparation procedure and the solution pH. Under certain conditions, the characteristics of the film could be improved to some extent.     

Investigations of tellurium-modified self-assembled monolayers of benzenedithiol on gold surface as molecular gate

In this paper, we report the obtention of tellurium modified with self-assembled monolayers of benzenedithiol on a gold surface as a molecular gate. The switching and electronic transport characteristics of the modified gold surface were investigated by cyclic voltammetry (CV). The CV results indicate that the switching of benzenedithiol gates is controlled by the oxidation state of tellurium, which is regulated by the applied potentials.