首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
本文研究了穴醚[2,2,2]和穴醚[2,2]在硝基甲烷中对镉的萃取行为。探讨了溶剂、穴醚浓度,碱浓度,无机酸浓度,盐效应及共存离子对镉萃取的影响。实验结果表明,硝基甲烷ε=35.6,μ=3.4德拜宜作为穴醚的溶剂。当穴醚[2,2,2]——硝基甲烷的浓度为2×10~(-3)M,Me_4NOH浓度为4×10~(-2)M时对镉的萃取最为有利。无机酸的引入使穴醚质子化程度加大,盐效应对镉的萃取无明显影响。十八种共存离子对镉萃取无干扰,因而选择性高。实验结果为用穴醚[2,2,2]萃取镉提供了依据。  相似文献   

2.
A bis-urea-functionalized pillar[5]arene has been synthesized and shown to form [2]pseudorotaxanes spontaneously with linear alkyl dicarboxylates in highly polar solvent DMSO, in which the hydrogen bonding interactions between the bis-urea hydrogens and dicarboxylate oxygens play an important role in stabilizing the novel [2]pseudorotaxanes alongside C-Hπ interactions.  相似文献   

3.
A novel [2]catenane is synthesized in good yield from an upper-rim functionalized calix[4]arene macrobicycle and a nitro-substituted isophthalamide threading component in the presence of a chloride anion template via a ring-closing metathesis (RCM) reaction. After halide anion template removal the resulting catenane host exhibits a high degree of selectivity for chloride in competitive organic solvent mixtures.  相似文献   

4.
A dynamic covalent approach to disulfide-containing [2]- and [3]rotaxanes is described. Symmetrical dumbbell-shaped compounds with two secondary ammonium centers and a central located disulfide bond were synthesized as components of rotaxanes. The rotaxanes were synthesized from the dumbbell-shaped compounds and dibenzo-[24]crown-8 (DB24C8) with catalysis by benzenethiol. The yields of isolated rotaxanes reached about 90 % under optimized conditions. A kinetic study on the reaction forming [2]rotaxane 2 a and [3]rotaxane 3 a suggested a plausible reaction mechanism comprising several steps, including 1) initiation, 2) [2]rotaxane formation, and 3) [3]rotaxane formation. The whole reaction was found to be reversible in the presence of thiols, and thermodynamic control over product distribution was thus possible by varying the temperature, solvent, initial ratio of substrates, and concentration. The steric bulk of the end-capping groups had almost no influence on rotaxane yields, but the structure of the thiol was crucial for reaction rates. Amines and phosphines were also effective as catalysts. The structural characterization of the rotaxanes included an X-ray crystallographic study on [3]rotaxane 3 a.  相似文献   

5.
In pursuit of highly preorganized macrocyclic host molecules for the complexation of anions, a series of oxacalix[2]arene[2]pyrimidine-based bis(thio)ureido receptors were synthesized and fully characterized. The pincer-like 1,3-alternate conformation of the oxacalix[4]arene scaffold, essential for an efficient host-guest interaction, was visualized by single-crystal X-ray analysis and supported by variable-temperature NMR studies. The anion binding properties of the receptors were evaluated via (1)H NMR titration experiments, showing intermolecular interactions with H(2)PO(4)(-), AcO(-), BzO(-), and Cl(-) ions. The host molecule bearing 4-nitrophenyl substituents on the bisurea binding pocket showed association constants in the range of 200-400 M(-1) in the strongly competitive solvent mixture of DMSO/0.5% H(2)O.  相似文献   

6.
dl-[2-13C]Leucine was prepared by condensing the sodium salt of ethyl acetamido-[2-13C]cyanoacetate with isobutylbromide in hexamethylphosphoroustriamide followed by acid hydrolysis. N-Boc-dl-[2-13C]Leucine was prepared and incorporated into [8-dl-[2-13C]leucine]oxytocin by total synthesis. The 13C-labeled hormone derivative [8-[2-13C]leucine]oxytocin was separated from its 8-position diastereoisomer by partition chromatography. The specifically 13C-labeled peptide hormone diastereoisomeric analog [3-dl-[2-13C]leucine]oxytocin also was prepared by solid phase peptide synthesis. No suitable solvent system for partition chromatography separation of the latter diastereoisomeric peptide mixture could be found. However an excellent preparative separation of the diastereoisomers could be obtained by reverse phase high pressure liquid chromatography on a partisil 10 M9 ODS column using the solvent system 0.05 M ammonium acetate (pH 4.0), acetonitrile (81:19, vv) to give pure [3-(2-13C]leucine]oxytocin and [3-D-(2-13C]leucine]oxytocin. An excellent separation of [8[2-13C]leucine]oxytocin and the corresponding 8-D-leucine diastereoisomer derivative could also be accomplished by high pressure liquid chromatography.  相似文献   

7.
A simple bis(imidazolium) dication, 1,4-bis[N-(N'-hydroimidazolium)]butane, can act as a new template for formation of [2]pseudorotaxane with pillar[5]arene, in which the dethreading/rethreading process can be controlled by addition of base and acid. The effect on the association constant of both the solvent and counterion is also described.  相似文献   

8.
A crown ether-containing macrobicycle was used as the wheel component in a templated synthesis of a [2]rotaxane with an acetal-containing axle. The molecular structures of the macrobicycle and the [2]rotaxane were characterized by NMR spectroscopy and X-ray crystallography. The chloride-binding ability of the macrobicycle, either free in solution or when it is part of a [2]rotaxane, is quite weak as determined by NMR titration experiments. A second analogous [2]rotaxane, with a longer axle, was synthesized, and its solvent-dependent co-conformation was characterized by 2D NMR spectroscopy. The position of the wheel along the axle can be controlled by the solvent polarity, however, attempts to use metal cations such as Na(+), K(+), Ba(2+), and Ag(+) to switch the wheel position in polar solvents were unsuccessful.  相似文献   

9.
Mono-alkyl-functionalized pillar[5] arenes P1,P2,and P3 were synthesized by click reaction,which exhibited different self-assembly behavior in polar solvent DMSO.Stable pseudo [1] rotaxane was formed by the self-complexation from P1 or P2,whereas,concentration-dependent pseudorotaxane structures were generated by P3 which bearing more flexible side chain.Interestingly,the obtained pseudo[1] rotaxanes exhibited a dynamic fast assembly process upon adding NaBF4,resulting in the formation of Na+-induced pseudorotaxanes.  相似文献   

10.
Two polymorphs of an [Au(CN)2]-based coordination polymer, Cu[Au(CN)2]2(DMSO)2, one green (1) and one blue (2), have been identified. In polymorph 1, alternation of five-coordinate Cu(II) and [Au(CN)2]- units generates 1-D chains, while 2-D corrugated sheets are obtained in polymorph 2, which contains six-coordinate Cu(II) centers. Both polymorphs form 3-D networks by virtue of aurophilic interactions of 3.22007(5) A and 3.419(3) A, respectively, and show similar weak antiferromagnetic coupling, but have different thermal decomposition temperatures. They both show vapochromic properties and, importantly, despite their significantly different solid-state structures, the vapochromic behavior of the two polymorphs is essentially identical. Upon solvent exchange, both polymorphs convert to the same Cu[Au(CN)2]2(solvent)x complex (solvent = H2O, CH3CN, dioxane, N,N-dimethylformamide, pyridine, NH3). The Cu[Au(CN)2]2(DMF) and Cu[Au(CN)2]2(pyridine)2 complexes have very similar 2-D square grid structures, comparable to that of 2. The solvent molecules adsorbed by Cu[Au(CN)2]2 bind to the Cu(II) centers, thereby altering the visible spectrum associated with the Cu(II) chromophores and the number and frequency of the nu(CN) as well. The network-stabilizing gold-gold interactions and the flexible coordination sphere of Cu(II) probably facilitate reversible solvent exchange at room temperature.  相似文献   

11.
The conversion of soluble polyoxometalate into insoluble polyoxometalate is considered to be one of the major challenges in synthetic organic chemistry. Here, polyoxometalate was bonded to the salt part of an organic branch immobilized on the silica-coated Fe3O4 nanoparticle and characterized using various techniques. The fabricated complex was used as a heterogeneous catalyst in a novel one-pot reaction for synthesis of benzo[4,5]imidazo[1,2-a]pyrimidin-2-ones using aromatic amines, dimethyl acetylenedicarboxylate (DMAD), derivatives of benzaldehyde and 2-aminobenzimidazole in water/ethanol as a green solvent. 21 derivatives of benzo[4,5]imidazo[1,2-a]pyrimidin-2-one were synthesized by this method and fully characterized. The high stability of the catalyst showed that it can be reused for 6 times without decreasing in activity. The combination of new synthetic method, new ferromagnetic heterogeneous nano-catalyst, green solvent and simple separation method were presented in this work.  相似文献   

12.
Addition of bromine to 2-methyl-2-azabicyclo[2.2.1]hept-5-ene was studied. Unexpectedly, 3-bromo-1-methyl-1-azoniatricyclo[2.2.1.02,6]heptane tribromide was isolated rather than the product of bromine addition to the double bond. The former reacted with the starting alkene in a polar solvent to form the corresponding monobromide.  相似文献   

13.
The syntheses and conformational structures of various functionalized tetraoxacalix[2]arene[2]triazines were studied. Applying the fragment coupling approach and the post-macrocyclization chemical manipulations, a number of tetraoxacalix[2]arene[2]triazines that contain, on the lower rim, one or two aldehyde, ester, carboxylic acid, hydroxymethyl, and aminomethyl functional groups were prepared in moderate to high chemical yields from cheap and commercially available materials. On the basis of X-ray crystallography and NMR spectroscopy, all tetraoxacalix[2]arene[2]triazines containing electron-withdrawing group(s) adopted 1,3-alternate conformation both in solution and in the solid state, while tetraoxacalix[2]arene[2]triazines bearing hydroxymethyl and aminomethyl substituent(s) existed as pinched or distorted partial cone conformers due to the formation of intramolecular hydrogen bond between hydroxyl or amino group and triazine ring.  相似文献   

14.
Heteroatom-bridged dichlorinated calix[2]arene[2]triazines, which were synthesized from the fragment coupling reactions of cyanuric chloride and various aromatic dinucleophiles, are a unique type of platform for the construction of functional macrocyclic host molecules. Utilizing a very convenient and straightforward nucleophilic displacement reaction of dichlorinated tetraoxacalix[2]arene[2]triazine by various chelating group-containing amines, a number of functionalized tetraoxacalix[2]arene[2]triazines on the larger rim were efficiently synthesized in good yields. The resulting tetraoxacalix[2]arene[2]triazines armed with two 2,2'-bi(pyridinyl)amino or two bis(2-pyridinemethyl)amino groups selectively formed 1:1 complexes with Cu2+ ion through most probably a chelating interaction effect.  相似文献   

15.
Diversely functionalized oxacalix[2]arene[2]pyrimidines have been synthesized starting from a bis(methylsulfanyl)-substituted oxacalix[4]arene by two efficient post-macrocyclization pathways. Functionalized aryl groups were introduced on the pyrimidine building block via Liebeskind-Srogl cross-coupling reactions, while a variety of O-, S-, N-, and C-nucleophiles were inserted on the calixarene skeleton by nucleophilic aromatic substitution reactions on the bis(methylsulfonyl)oxacalix[4]arene analogue.  相似文献   

16.
2-[(Dialkylcarbamoyl)methylene]-2,3-dihydrobenzo[1,4]dioxine and 3-[(dialkylcarbamoyl)methylene]-3,4-dihydro-2H-benzo[1,4]oxazine derivatives (3 and 5, respectively) were synthesized for the first time starting from readily available 2-prop-2-ynyloxyphenols 1 and 2-prop-2-ynyloxyanilines 4, respectively, through tandem oxidative aminocarbonylation of the triple bond-intramolecular conjugate addition. Reactions were carried out in the presence of catalytic amounts of PdI2 in conjunction with an excess of KI in N,N-dimethylacetamide (DMA) as the solvent at 80-100 degrees C and under 20 atm (at 25 degrees C) of a 4:1 mixture of CO-air. The reaction showed a significant degree of stereoselectivity, the Z isomers being formed preferentially or exclusively. The configuration around the double bond of the major stereoisomers was unequivocally established by X-ray diffraction analysis.  相似文献   

17.
Possible rearrangement mechanisms of hydrogen-bond arrays formed at the lower rim of tetrahydroxycalix[4]arene and tetrahydroxythiacalix[4]arene were studied by means of density functional theory and the resolution identity approximation modification of M?ller-Plesset perturbation theory (RI-MP2). Influence of solvent to height of energy barriers was quantified by use of the conductorlike screening model (COSMO) of implicit solvent (chloroform). Generally, two types of mechanisms were investigated. The first is represented by a synchronous single-step jump of all four hydroxyl protons. Pathways of the second mechanism include the rotation of one or more hydroxyl groups around the CAr-O bond. Theoretical results, in agreement with recently published experimental data (Lang et al. J. Chem. Phys. 2005, 122, 044056), prefer a jump mechanism for the methylene-bridged calix[4]arene. Concerning the thiacalix[4]arene, results obtained by COSMO as well as RI-MP2 calculations show that the rotational mechanism is very competitive and it could even be more favorable.  相似文献   

18.
[reactions: see text] A rhodium complex of N-heterocyclic carbene (NHC) has been developed for intra- and intermolecular [4 + 2] and intramolecular [5 + 2] cycloaddition reactions. This is the first use of a transition-metal NHC complex in a Diels-Alder-type reaction. For the intramolecular [4 + 2] cycloaddition reactions, all the dienynes studied were converted to their corresponding cycloadducts in 91-99% yields within 10 min. Moreover, up to 1900 turnovers have been obtained for the intramolecular [4 + 2] cycloaddition at 15-20 degrees C. For the intermolecular [4 + 2] cycloadditions, high yields (71-99%) of the corresponding cycloaddition products were obtained. The reaction time and yield were highly dependent upon the diene and the dienophile. For the intramolecular [5 + 2] cycloaddition reactions, all the alkyne vinylcyclopropanes studied were converted to their corresponding cycloadducts in 91-98% yields within 10 min. However, the catalytic system was not effective for an intermolecular [5 + 2] cycloaddition reaction.  相似文献   

19.
利用一维稳态红外光谱和5-μm泵浦探测红外光谱手段,结合量子化学计算,以非桥连三价羰基为探针,研究了二羰基茂铁二聚体[CpFe(CO)2]2在二氯甲烷中的结构和振动动力学.结果表明,[CpFe(CO)2]2两个主要结构(顺式cis和反式trans摩尔比为1.7)的振动态寿命和转动动力学都有一定不同.两种结构的两个羰基振动激发态的指数衰减过程都有一个<1ps的快组分和一个~20ps的慢组分.我们认为前者与宽带激发所产生的振动相干态的快速失相过程有关,而后者属于典型的C≡O伸缩振动态寿命.此外,cis结构与溶剂的较强作用使得其转动衰减较慢.结果表明,非桥连羰基的红外吸收频率和振转动力学对分子结构和溶剂环境都非常敏感.  相似文献   

20.
Bis(ketenimines), in which the two heterocumulenic functions are placed in close proximity on a carbon skeleton to allow their mutual interaction, show a rich and not easily predictable chemistry. Intramolecular [2 + 2] or [4 + 2] cycloadditions are, respectively, observed when both ketenimine functions are supported on either ortho-benzylic or 2,2'-biphenylenic scaffolds. In addition, nitrogen-to-carbon [1,3] and [1,5] shifts of arylmethyl groups in N-arylmethyl-C,C-diphenyl ketenimines are also disclosed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号