聚氧化乙烯和聚醋酸乙烯酯在超声波辐照下接枝反应的研究

本文分别研究了聚氧化乙烯(PEO)和聚醋酸乙烯酯(PVAc) 在苯溶液中的超声波辐照降解,PEO与PVAc在苯溶液中的超声波辐照共聚反应。实验证明,降解反应可用Ovenall方程描述。用IR、NMR和DTA分析了在超声波辐照作用下PEO与PVAc在苯溶液中生成的共聚物的结构,证明所得产物主要为接枝共聚物,将浓度为1％的(PEO-PVAc)苯溶液在频率为18.2kHz、逆变器主迥路输入电流为2.0安的超声波强度下,辐照10分钟,共聚物的产率为10.54％,接枝点密度为33.3％,平均接枝链长为17。     

STUDIES OF THE CRYSTALLIZATION BEHAVIOR IN THE CRYSTALLINE/AMORPHOUS POLYMER BLENDS: POLY(ETHYLENE OXIDE)/POLY(METHYL METHACRYLATE) AND POLY(ETHYLENE OXIDE)/POLY(VINYL ACETATE)

The crystallization process of poly(ethylene oxide) (PEO)/poly(methyl methacrylate) (PMMA)and PEO/poly(vinyl acetate) (PVAc) blends has been characterized by Fourier Transform Infrared(FTIR) spectra in conjunction with Differential Scanning Calorimeter (DSC) measurements. Thecrystallinity of PEO varies consistently with PEO content in PEO/PVAc blends and the PEO/PMMAblends containing 50 wt% or less PMMA. For the PEO/PMMA blends containing 60 wt% ormore PMMA, the crystallinity of PEO decreases more than PEO content but develops with crystal-lization time. These results can be explained in terms of difference between the crystallization tem-perature (T_c) and glass transition temperature (T_g) of the blends as a function of content of amorphouscomponent.     

A STUDY ON POLY (ETHYLENE OXIDE)/POLY(VINYL ACETATE)BLENDS

Melt blends of poly(ethylene oxide) (PEO) and poly(vinyl acetate (PVAc) were prepared andstudied by Torsional Pendulum Analysis (TPA) and Fourier Transform Infrared (FTIR). Two glasstransitions were found in these blends. The lower T_g corresponds to the segmental motion in thepure PEO. The dependence of the position and broadness of the higher T_g on composition of theblends indicates that the two components are compatible in the amorphous phase with micro-hetero-geneity. These T_g values observed from mixed PVAc/PEO phase are much higher than that calculatedfrom Fox equation. The comparison of the blends quenched and annealed from melt implies thatPVAc mixed with PEO at the segmental level on molten state and the deviation of T_g values fromFox equation could be due to variation of the blend's composition by crystallization of part of thePEO component. Further indication that the blends are compatible down to the level of chain segments and thatthere are specific interactions between PVAc and PEO molecules comes from the analysis of FTIRspectra of the blends and the solution of PVA in diethylene glycol dimethyl ether.     

Morphology of poly(ethylene oxide)/poly(vinyl acetate) blends

The morphology of poly(ethylene oxide)/poly(vinyl acetate) (PEO/PVAc) blends was examined using small angle X-ray scattering (SAXS) and optical microscopy. The morphological and structural parameters of the blends are dependent on both composition and crystallization conditions. Optical microscopy revealed that blend samples prepared by solution casting crystallized with volume-filling crystals up to a composition of 30/70 wt% PEO/PVAc; at higher PVAc content there was no evidence of crystallization in the temperature range studied. Pure PEO always crystallized with a spherulite-hedrite morphology. The formation of spherulites was relatively favoured at lower crystallization temperatures and by addition of PVAc to PEO. Small angle X-ray intensity profiles were analyzed using a recently developed methodology and it was found that, for a given crystallization temperature, the amorphous and interphase thicknesses increased with increasing PVAc content but that the average crystalline thickness was independent of composition. The morphological and structural properties of the PEO/PVAc blends were attributed to the presence of non-crystallizable material in both the interlamellar and interfibrillar regions.     

Block copolymers of poly(ethylene oxide) and poly(vinyl alcohol) synthesized by the RAFT methodology

A methodology for the synthesis of well‐defined poly(ethylene oxide)‐block‐poly(vinyl alcohol) (PEO‐b‐PVA) and PVA‐b‐PEO‐b‐PVA polymers was reported. Novel xanthate end‐functionalized PEOs were synthesized by a series of end‐group transformations. They were then used to mediate the reversible addition–fragmentation chain transfer polymerization of vinyl acetate to obtain well‐defined poly(ethylene oxide)‐b‐poly(vinyl acetate) (PEO‐b‐PVAc) and PVAc‐b‐PEO‐b‐PVAc. When these block copolymers were directly hydrolyzed in methanol solution of sodium hydroxide, polymers with brown color were obtained, which was due to the formation of conjugated unsaturated aldehyde structures. To circumvent these side reactions, the xanthate groups were removed by adding a primary amine before hydrolysis and the products thus obtained were white powders. The polymers were characterized by gel permeation chromatography, ¹H NMR spectroscopy and FT‐IR. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1901–1910, 2009     

Nonlinear Effects on the Ionic Conductivity of Polyethylene Oxide)/Uthium Perchlorate Complexes Caused by the Blending of Polyvinyl Acetate)

Poly(ethylene oxide) (PEO)/LiClO₄/poly(vinyl acetate) (PVAc) and PEO/LiClO₄/poly(vinyl pyrrolidone) (PVP) complexes were prepared with various weight ratios of PVAc and PVP to PEO. The conductivity (σ) of the PEO/LiClO₄ complex was increased in a nonlinear fashion by the presence of up to 60 wt% PVAc. PEO/LiClO₄/PVAc complexes with weight percents of PVAc greater than 60 had σ's less than that of PEO/LiClO₄. The σ of PEO/LiClO₄ was decreased by the presence of any PVP.     

羟乙基纤维素和聚氧化乙烯在超声波辐照下的降解与嵌段共聚的研究

本文分别研究了在超声波辐照下羟乙基纤维素(HEC)和聚氧化乙烯(PEO)在水溶液中的降解规律,HEC与PEO在水溶液中的超声波辐照共聚反应。用DTA、IR、MS、X射线衍射和偏光显微镜初步研究了共聚物的结构,证明所得产物主要是嵌段共聚物。将浓度为0.5％的HEC/PEO水溶液在25±1℃,频率为18.2kHz,超声波强度(以逆变器主迴路输入电流表示)为2.5A下辐照10分钟,共聚物产率为55.07％。     

COMPATIBILITY IN POLYMER BLENDS OF POLY (VINYL ACETATE) AND POLY (METHYL METHACRYLATE)STUDIED BY NMR

Compatibility of poly (vinyl acetate) (PVAc) with poly (methyl methacrylate) (PMMA) mixtures has been studied by using nuclear magnetic relaxation, differential scanning calorimeter and small-angle X-ray scattering techniques. The nuclear magnetic relaxation time T_1's were measured as a function of composition in blends of PMMA and PVAc prepared from chloroform solution. The results show that the system is miscible for casting from chloroform solution.     

聚环氧乙烷(PEO)与聚醋酸乙烯酯(PVA)的共混研究

动态力学谱研究表明熔融共混PVA/PEO体系的无定形态中存在着纯PEO及PVA/PEO的相容或部分相容相。相容或部分相容相的T_g随共混物组成的变化远高于按照FOX方程的计算值。用结晶和分子间相互作用解释了这种对FOX方程的偏离。应用FTIR差示光谱技术对PVA/PEO共混物和PVA/DGDE浓溶液的研究证实了PVA分子链上酯基和PEO分子链存在着强的相互作用。     

Effects of poly(methyl methacrylate)-block-poly(vinyl acetate) copolymer on the spinodal decomposition of corresponding homopolymer blends

Effects of adding a small amount of poly(methyl methacrylate)-block-poly(vinyl acetate) (PMMA-b-PVAc) to poly(methyl methacrylate)/poly(vinyl acetate) (PMMA/PVAc) blends with a lower critical solution temperature (LCST) phase diagram on the kinetics of late-stage spinodal decomposition (SD) were investigated by time-resolved light scattering at 160°C. It is found that the coarsening process of the structure was slowed down or accelerated upon addition of PMMA-b-PVAc depending on the composition of the block copolymer and the blend. The effect of the block copolymer on the domain size were interpreted as compatibilizing and incompatibilizing effects of the block copolymer on PMMA/PVAc blends based on the evaluation of changes in the stability limits of PMMA/PVAc with the addition of block copolymer using random phase approximation (RPA).     

肝素化聚甲基硅氧烷-聚氧乙烯接枝物的合成及其体外抗凝血性能评价

以二甲基硅油接枝端羟基聚氧乙烯（ＰＤＭＳ ｇ ＰＥＯ ＯＨ）为基材，用二环己基碳二亚胺（ＤＣＣＩ）作脱剂，研究了羟基（ＯＨ）与肝素上的羧基（—ＣＯＯＨ）之间的脱水缩合反应，制备出肝素化的抗血栓材料ＰＤＭＳ ｇ ＰＥＯ Ｈｅｐ，并对其涂覆表面的肝素含量和体外抗凝血性能进行了初步评价．实验结果表明，肝素接枝的共聚物具有优良的抗凝血性能和一定的应用前景．     

超声波辐照下聚氧化乙烯与甲基丙烯酸己酯非均相共聚反应研究

本文系统地研究了地超声波辐照下聚氧化乙烯(PEO)在其水溶液中与甲基丙烯酸己酯(HMA)的非均相共聚反应。结果表明,PEO超声降解产生的自由基可引发HMA聚合,形成PEO-HMA共聚物,该共聚物在超声波辐照下可进一步降解。通过红外光谱、裂解气相色谱及核磁共振分析表明,所得共聚物为嵌段共聚物。     

Correlation of infinite dilution activity coefficients of solvents in polymer solutions using connectivity indices

In this work, correlations for the estimation of the infinite dilution activity coefficients of non-polar solvents in polystyrene (PS), poly(vinyl acetate) (PVAc), poly(n-butyl methacrylate) (PBMA), poly(dimethyl siloxane), poly(methyl methacrylate) (PMMA), poly(ethylene oxide) (PEO), poly(vinyl chloride) (PVC), polyisobutylene and polyethylene (PE), and that of polar solvents in PS, PVAc, PBMA, PMMA, PEO, PVC and PE are proposed. A total of 205 polymer/non-polar solvent systems with 1708 data points, and 118 polymer/polar solvent systems with 695 data points were used to develop the correlations. The overall average errors were 9.6% and 11.3%, respectively, significantly lower than other predictive models. Since the new correlations require only the connectivity indices of the solvents in the calculations, and the connectivity indices can be calculated easily once the molecular structure of the substance in question is known, they are easy to apply, and are useful for process design and development.     

Adsorption of poly(ethylene oxide)-b-poly(epsilon-caprolactone) copolymers at the silica-water interface

The adsorption of amphiphilic poly(ethylene oxide)-b-poly(epsilon-caprolactone) and poly(ethylene oxide)-b-poly(gamma-methyl-epsilon-caprolactone) copolymers in aqueous solution on silica and glass surfaces has been investigated by flow microcalorimetry, small-angle neutron scattering (SANS), surface forces, and complementary techniques. The studied copolymers consist of a poly(ethylene oxide) (PEO) block of M(n) = 5000 and a hydrophobic polyester block of poly(epsilon-caprolactone) (PCL) or poly(gamma-methyl-epsilon-caprolactone) (PMCL) of M(n) in the 950-2200 range. Compared to homoPEO, the adsorption of the copolymers is significantly increased by the connection of PEO to an aliphatic polyester block. According to calorimetric experiments, the copolymers interact with the surface mainly through the hydrophilic block. At low surface coverage, the PEO block interacts with the surface such that both PEO and PCL chains are exposed to the aqueous solution. At high surface coverage, a dense copolymer layer is observed with the PEO blocks oriented toward the solution. The structure of the copolymer layer has been analyzed by neutron scattering using the contrast matching technique and by tapping mode atomic force microscopy. The experimental observations agree with the coadsorption of micelles and free copolymer chains at the interface.     

聚丙烯酸/聚氧化乙烯高分子复合溶液的结构与粘度

通过溶液折光指数和粘度测定,研究了聚丙烯酸（ＰＡＡ）与聚氧化乙烯（ＰＥＯ）高分子链间在复合溶液中的相互作用和ＰＡＡ／ＰＥＯ高分子氢键复合溶液的结构与粘度,研究了复合溶液粘度随溶液ｐＨ值的变化规律及不同浓度时剪切速率对复合溶液粘度和复合增粘效果的影响。结果表明：ＰＡＡ／ＰＥＯ复合溶液结构不同于ＰＡＡ和ＰＥＯ两组分聚合物溶液结构,ＰＡＡ与ＰＥＯ高分子链间的氢键相互作用形成构象更为伸展、流体力学体积列大     

Compatibility of poly(ethylene oxide)–poly(vinyl acetate) blends

The compatibility of poly(ethylene oxide)–poly(vinyl acetate) (PEO-PVA) blends was examined at five compositions covering the complete range. Samples were prepared by coprecipitation and solution casting. Dynamic mechanical properties were studied at 110 Hz between ?120 and 65°C for dry, quenched, and annealed samples. The study also included tensile testing at 25°C, examination of blend morphology, and DSC measurements at elevated temperatures. Optical microscopy revealed that crystallization of PEO proceeds essentially unhindered at up to 25% poly(vinyl acetate) content by weight. Higher levels of this component drastically reduce spherulite size, and at the highest PVA compositions there was no evidence of crystallization. Thermomechanical spectra of quenched and annealed samples indicate limited mixing of the two components except for the higher (>75%) PVA compositions. Tensile properties show a mutual reinforcement at 10-25% PVA content due to possible polymer segment association. The melting-point depression of PEO is significant above 25% PVA and has been attributed to morphological changes of the PEO crystalline phase.     

Studies on Ultrasonic Degradation and Block Copolymerization of Hydroxyethylcellulose and Poly(ethylene Oxide)

The ultrasonic degradation of hydroxyethylcellulose (HEC) and poly (ethylene oxide) (PEO) in aqueous solution, and the copolymerization of HEC with PEO were studied. The structure of the copolymer was identified by DTA, IR, MS, x-ray diffraction, and polarizing microscopy. The copolymer prepared is mainly block. The copolymer formed amounts to 55.07% by irradiating 0.5% HEC/PEO aqueous solution for a period of 10 min at 25°C and 18.2 kHz with 2.5 A input current on a reversed main circuit.     

Crystallization,morphology, structure and miscibility of poly(ethylene oxide) based blends

Results of an investigation on the morphology, structure, isothermal crystallization, thermal behaviour and miscibility of poly(ethylene oxide) (PEO) based binary blends are reported. In particular poly(vinyl acetate)(PVAc), poly(methyl methacrylate) (PMMA) at different tacticity and poly(ethyl methacrylate) (PEMA) were added to PEO. It was found that with the only exception of isotactic poly(methyl methacrylate) (IPMMA), the addition of the above cited components causes a depression in both the spherulite growth rate and the overall kinetic rate constant. The experimental G and Kn were analyzed by means of the latest kinetic theory in order to determine the influence of composition on the process of surface secondary nucleation. The optical microscopy of thin films of the sample revealed that the blends crystallized with volume filling crystals at least up to 50/50 blend composition. The small angle X-ray scattering curves were analyzed using a recently developed methodology. The structural properties of the blends were attributed to the presence of the non crystallizable material in the interlamellar or interfibrillar regions of PEO. From the glass transition temperature it has been deduced that an homogeneous amorphous phase is present for all the blends except for the PEO/IPMMA amorphous system. For the system PEO/atactic poly(methyl methacrylate) (APMMA) the miscibility was also predicted by theoretical approaches.     

聚醋酸乙烯酯/聚丙烯酸甲酯互穿网络聚合物的研究——1.聚合条件对体系相容性的影响

用分步法合成了聚醋酸乙烯酯/聚丙烯酸甲酯互穿网络聚合物(PVAc/PMA-IPN),PVAc和PMA的交联剂分别是丁二酸二烯丙酯(DAS),和二乙烯基苯(DVB)。当DAS用量较小时,VAc聚合时的接枝反应较明显,PVAc网络的交联密度高于化学当量的计算值。动态力学的实验结果表明,丙烯酸甲酯的聚合温度和聚合过程中的溶胶-凝胶转变对PVAc/PMA-IPN体系的相容性有很大影响。     

聚醋酸乙烯酯/聚丙烯酸甲酯互穿网络聚合物的研究——1.聚合条件对体系相容性的影响

 用分步法合成了聚醋酸乙烯酯/聚丙烯酸甲酯互穿网络聚合物(PVAc/PMA-IPN),PVAc和PMA的交联剂分别是丁二酸二烯丙酯(DAS),和二乙烯基苯(DVB)。当DAS用量较小时,VAc聚合时的接枝反应较明显,PVAc网络的交联密度高于化学当量的计算值。动态力学的实验结果表明,丙烯酸甲酯的聚合温度和聚合过程中的溶胶-凝胶转变对PVAc/PMA-IPN体系的相容性有很大影响。