An assessment of the retention behaviour of polycyclic aromatic hydrocarbons on reversed phase stationary phases--thermodynamic behaviour on C18 and phenyl-type surfaces

The thermodynamic retention behaviour of a linear series of polycyclic aromatic hydrocarbons (PAHs) was investigated on C18 and selected phenyl-type reversed-phase stationary phases, namely C18, C18 Aqua, Propyl-phenyl and Synergi polar-RP stationary phases, using methanol mobile phases. The Propyl-phenyl stationary phase, despite having the lowest surface coverage, was found to exhibit significantly larger enthalpic interactions to the other Phenyl-type phase (Synergi polar-RP) even though this had a much higher surface coverage. This indicated that stronger interactions between the PAHs and the stationary phase ligands were occurring on the Propyl-phenyl phase. Evaluation of the elution band profile of the PAHs in the aqueous methanol mobile phase revealed fairly symmetrical bands for the C18, C18 Aqua and Synergi polar-RP, but severe peak tailing on the Propyl-phenyl phase. A change in mobile phase from methanol to acetonitrile improved the peak shape of the PAHs on the Propyl-phenyl phase, leading to the assumption that unfavourable pi-pi interactions were occurring between the electron-rich PAHs and the electron-rich phenyl rings of the Propyl-phenyl phase.     

一种提高色谱指纹谱保留时间重现性的新方法

通过色谱热力学分析发现，在相同的分析条件下，即使采用不同的液相色谱系统或不同的色谱柱，组分的保留时间存在简单的线性关系，应用该线性关系可提高不同反相C18柱间保留时间重现性，经过实际样品在不同操作条件下的验证，表明该方法是正确而可行的。     

Measurement of Henry coefficients by capillary columns coated with slightly polar solvents

Summary The specific retention volumes and Henry coefficients measured on packed columns are compared with those calculated via retention indices determined on wall coated open tubular capillary columns. The stationary phase liquids used were derivatives of a branched paraffin, C₇₈H₁₅₈, where a methyl or ethyl group of the paraffin was replaced by OH, CN, OCH₃ and SH groups. The retention indices of a series of molecular probes of varying polarity (aromatics, 1-chloroalkanes, 1-acetoxy-alkanes, 1-alkanols, 2-alkanones) were determined atT=403.15 K on fused-silica open tubular columns prepared by static coating that gave stable and uniform solvent films. After obtaining the absolute data on packed columns forn-alkanes, the specific retention volumes and Henry coefficients of the solutes were calculated. The retention data obtained on both columns showed good agreement. Presented at Balaton Symposium on High Performance Separation Methods, Siófok, Hungary, September 1–3, 1999     

Estimation of Kováts retention indices using group contributions

We have constructed a group contribution method for estimating Kováts retention indices by using observed data from a set of diverse organic compounds. Our database contains observed retention indices for over 35,000 different molecules. These were measured on capillary or packed columns with polar and nonpolar (or slightly polar) stationary phases under isothermal or nonisothermal conditions. We neglected any dependence of index values on these factors by averaging observations. Using 84 groups, we determined two sets of increment values, one for nonpolar and the other for polar column data. For nonpolar column data, the median absolute prediction error was 46 (3.2%). For data on polar columns, the median absolute error was 65 (3.9%). While accuracy is insufficient for identification based solely on retention, it is suitable for the rejection of certain classes of false identifications made by gas chromatography/mass spectrometry.     

Relevance of pi-pi and dipole-dipole interactions for retention on cyano and phenyl columns in reversed-phase liquid chromatography

Previous work suggests that pi-pi interactions between certain solutes and both phenyl and cyano columns can contribute to sample retention and the selectivity of these two column types versus alkylsilica columns. Recent studies also suggest that dipole-dipole interactions are generally unimportant for retention on cyano columns. The present study presents data for 44 solutes, three columns and two different mobile phases that were selected to further test these conclusions. We find that pi-pi interactions can contribute to retention on both cyano and phenyl columns, while dipole-dipole interactions are likely to be significant for the retention of polar aliphatic solutes on cyano columns. When acetonitrile/water mobile phases are used, both pi-pi and dipole-dipole interactions are suppressed, compared to the use of methanol/water.     

Investigation of the low temperature effect in normal phase micro high performance liquid chromatography

The low temperature effect has been investigated on a set of three different silica-gel micro columns with FC-78 as eluent. An open tubular micro glass capillary, a packed micro glass capillary, and a packed micro teflon column were examined. Temperature dependences of separation factors and theoretical plate numbers were determined. It appears that a decrease in column temperature improves chromatographic selectivity while column efficiency decreases. The compensation temperatures were determined for these systems. The results suggest that the retention mechanism operative in the low temperature range is almost the same as that in the normal temperature range. However, the mechanism differs from that of reversed phase systems.     

Distribution coefficients of n-alkanes measured on wall-coated capillary columns

Distribution coefficients K of n-alkanes were determined in wide ranges of temperature and carbon numbers from gas chromatographic retention data measured on wall-coated poly(dimethylsiloxane) commercial capillary columns. A discussion is centered on how to mitigate the difficulties for an accurate determination of K when using weakly retentive columns, as those bearing very high phase ratios or short lengths. Particularly, the errors associated with the estimation of the gas hold-up and the phase ratio of the column are considered. The chromatographic importance for determining K of n-alkanes relies on the fact that these are the most commonly applied references for reporting relative thermodynamic parameters such as the Kovats Index and the relative retention. A great amount of information has been compiled in this form. If K of the reference is known, absolute values of distribution coefficients for a myriad of substances are readily obtainable. The knowledge of K(T) functions of solutes in wide ranges of temperature is a primary necessity in temperature-programmed gas chromatography. This knowledge is needed for the prediction of absolute retention times and for computing separation optimizations of mixtures containing several critical pairs of analytes.     

Chiral high-performance liquid chromatographic separations of vinca alkaloid analogues on alpha 1-acid glycoprotein and human serum albumin columns.

Separations of the stereoisomers of a series of tetracyclic and pentacyclic vinca alkaloid analogues having two or three chiral centres were performed on Chiral-AGP and Chiral-HSA high-performance liquid chromatographic columns. Phosphate buffers with pH 5-7 containing 5-35% acetonitrile or 2-propanol were used as mobile phases. The results were in accordance with previous binding data obtained with native AGP and on an HSA-Sepharose column. Whereas on Chiral-AGP the retention of the trans isomers having 1(R),12b(S)-indolo[2,3-a]quinolizidine or the corresponding 3(S),16(R)-eburnane absolute configurations was exceedingly high, on Chiral-HSA the trans isomers, independently of their absolute configurations, were more retained. Eburnane-type compounds could also be separated according to the configuration of the chiral centre at position 14. A comparison of the chromatographic properties of the vinca alkaloids on the Chiral-AGP and Chiral-HSA columns demonstrates that these compounds are bound with higher affinity to the AGP phase. The AGP column resolves a very broad range of vinca alkaloids compared with the HSA column. Higher stereoselectivity and a much better chromatographic performance were also obtained on the Chiral-AGP column.     

焓-熵补偿在芳香化合物位置异构体保留机理研究中的应用

系统地研究了二氯苯等６种芳香化合物在ＰＳＯ－１１－１８Ｃ６等９支冠醚聚硅氧烷和ＯＶ－１７０１,Ｃａｒｂｏｗａｘ－２０Ｍ毛细管色谱柱上分离过程的热力学参数。利用超热力学方法,考察了这些芳香化合物及其异构体在各种色谱柱上分离过程的焓－熵补偿现象。论述了各种冠醚固定液对芳香化合物的保留机理以及取代基在苯环上位置的变化对溶质与冠醚固定液之间的相互作用参数的影响。     

Modification of the algorithm of determining chromatographic retention indices for compensating their dependence on the ratio of analytes and reference components

One of the main sources of the interlaboratory variation of chromatographic retention indices, especially in using packed columns, is their dependence on the ratio of the amounts of characterized analytes and reference components (γ). It is shown that this dependence can be compensated without any additional experiments. The recording of the retention parameters of the characterized and reference components at their fronts at the points corresponding to equal absolute intensities of the signals, rather than at the maxima of the chromatographic peaks provides the most reproducible values of retention indices, practically independent on the values of γ.     

反相液相色谱中同系物保留值与流动相组成的交点规律

本文在作者提出的反相液相色谱中同系物保留值与常沸点的交点规律基础上，推导出系物保留值与流动相组成的交点规律，用大量实验数据作了检验。并用新交点方程式，由化合物在一个流动相组成下的保留值，预测该化合物在任一流动相组成下的保留值，对１４组同系物在５种色谱柱上５类流动相下的验算结果表明，７２１个数据点的绝对平均误差为２．８％。     

Factors Affecting the Interpretation of Selectivity on Synergi Reversed-Phase Columns

The solvation parameter model is used to establish the contribution of cohesion, dipole-type, and hydrogen-bonding interactions to the retention mechanism on Synergi Hydro-RP, Fusion-RP, and Polar-RP reversed-phase columns with methanol–water mobile phases containing from 10–70% (v/v) methanol. Large changes in relative retention on the compared columns can result from steric resistance, differences in the phase ratios, and from dewetting at low methanol compositions while changes in intermolecular interactions are responsible for smaller changes at a fixed mobile phase composition. For Synergi Hydro-RP and Polar-RP changing methanol for acetonirile is more powerful for affecting changes in retention order than changing the stationary phase. The three Synergi columns show useful selectivity differences for method development when compared with 13 other modern reversed-phase columns representing a selection of different stationary phase chemistries. The results from this study indicate the limitations of classifying reversed-phase columns by the retention of prototypical compounds to define specific retention mechanisms.     

Column selectivity in reversed-phase liquid chromatography. V. Higher metal content (type-A) alkyl-silica columns

Retention measurements involving 16 test solutes have been carried out for 38 type-A alkyl-silica columns and three bonded-zirconia columns. These measurements have been analyzed in terms of a model previously developed for type-B columns, so as to yield values of five column selectivity parameters (H, S*, A, B, C) for each type-A column. Overall differences in selectivity between type-A and -B columns can be related to the average values of H, S*, etc. for each column type. Compared to type-B columns, type-A columns provide generally stronger retention for carboxylic acids, while solutes that are more hydrophobic or less bulky are more retained on type-B columns. Hydrogen-bond acceptors (e.g. aliphatic amides) and cations (e.g. protonated bases) are strongly retained on type-A versus type-B columns. Compared to type-B columns, bonded-zirconia columns show much increased retention of cations and reduced retention of hydrogen-bond acceptors. Because of relatively large differences in the selectivity of bonded-zirconia, type-A, and type-B columns, it will prove difficult to find columns of different type (e.g. a type-A and a type-B column) which have equivalent selectivity. Type-A columns also tend to be more different from each other (in terms of selectivity) than is the case for type-B columns. As a result, the replacement of a given type-A column by an "equivalent" type-A column also appears unlikely, except for samples that do not contain ionized compounds.     

Application of thermodynamic‐based retention time prediction to ionic liquid stationary phases

First‐ and second‐dimension retention times for a series of alkyl phosphates were predicted for multiple column combinations in GC×GC. This was accomplished through the use of a three‐parameter thermodynamic model where the analytes’ interactions with the stationary phases in both dimensions are known. Ionic liquid columns were employed to impart unique selectivity for alkyl phosphates, and it was determined that for alkyl phosphate compounds, ionic liquid columns are best used in the primary dimension. Retention coordinates for unknown phosphates are predicted from the thermodynamic parameters of a set standard alkyl phosphates. Additionally, we present changing retention properties of alkyl phosphates on some ionic liquid columns, due to suspected reaction between the analyte and column. This makes it difficult to accurately predict their retention properties, and in general poses a problem for ionic liquid columns with these types of analytes.     

Comparison of the chromatographic behavior of tricyclic neuroleptics on calixarene-bonded, monolithic and conventional RP-HPLC columns

The effect of different chromatographic conditions, such as buffer concentration and type of organic modifier, on the retention behavior of nine tricyclic neuroleptics on three different RP-HPLC columns was investigated. Two recently developed columns, calixarene-bonded (CALTREX) AIII) and monolithic (Chromolith) Performance RP-18e) columns, were compared with a conventional RP-C18 HPLC column (LiChrospher). The results showed how the mobile phase conditions had different effects on the analyte retention on these three columns. For example, the elution order of some analytes and the initiation of separation of the geometric isomers of the three analytes--which have E/Z-isomers (cis/trans-isomers)--could be altered by changing the conditions and the column type. Under identical conditions, a calixarene-bonded phase was the best for this separation, a monolithic phase gave comparable results and the conventional RP-column was the least effective. Concerning the geometric isomers separation, the Chromolith Performance RP-18e was superior.     

Effect of water on the retention on diol and amide columns in hydrophilic interaction liquid chromatography

The amount of water adsorbed on polar columns plays important role in hydrophilic interaction liquid chromatography. It may strongly differ for the individual types of polar columns used in this separation mode. We measured adsorption isotherms of water on an amide and three diol‐bonded stationary phases that differ in the chemistry of the bonded ligands and properties of the silica gel support. We studied the effects of the adsorbed water on the retention of aromatic carboxylic acids, flavonoids, benzoic acid derivatives, nucleic bases, and nucleosides in aqueous‐acetonitrile mobile phases over the full composition range. The graphs of the retention factors versus the volume fraction of water in mobile phase show “U‐profile” characteristic of a dual hydrophilic interaction–reversed phase retention mechanism. The minimum on the graph that marks the changing retention mechanism depends on the amount of adsorbed water. The linear solvation energy relationship model suggests that the retention in the hydrophilic interaction liquid chromatography mode is controlled mainly by proton–donor interactions in the stationary phase, depending on the column type. Finally, the accuracy of hydrophilic interaction liquid chromatography gradient prediction improves for columns that show a high water adsorption.     

Simple gas chromatographic method for the stereodifferentiation of methyl nilate, a chiral alpha-methyl-beta-hydroxy ester

The four stereoisomers of methyl nilate, methyl 3-hydroxy-2-methylbutanoate, have been separated and analyzed by the direct simultaneous achiral-chiral high-resolution gas chromatography (HRGC) and also by the chiral high-resolution gas chromatography-time-of-flight mass spectrometry (HRGC-TOF-MS). The method involved the use of DB-5 and CP Chirasil-Dex CB columns. The elution sequences on the two columns were determined and are reported. The one-step GC method allows the identification by retention data and simultaneously to determine unequivocally the absolute configuration of nilic acid moieties contained in minor complex natural products without previous isolation, as part of a general strategy for the structure determination of the compounds.