镁铝混合氧化物负载镍催化剂的制备及在液化石油气低温重整反应中的催化性能

采用共沉淀-浸渍法制备了不同Ni 含量的 Ni/Mg(Al)O 催化剂并用于液化石油气(LPG)的低温水蒸气重整反应. X 射线衍射和程序升温还原结果表明, 在 800 ℃焙烧的 Ni/Mg(Al)O 催化剂中, NiO 与 MgO 反应生成 Mg-Ni-O 固溶体, 还原后形成金属 Ni 纳米颗粒. 详细研究了 Ni 含量(质量分数)、反应温度和水/碳摩尔比(n_H2O/n_C) 等对催化剂性能的影响. 实验结果表明, 15%Ni/Mg(Al)O 催化剂对 LPG 低温重整反应具有最佳的催化性能. 提高反应温度能显著提高 Ni/Mg(Al)O 催化剂的催化性能. 当n_H2O/n_C=2时, 在400~500 ℃的温度范围使LPG完全转化的最大反应空速从 28900 mL·h^-1·g^-1Cat提高到 86800 mL·h^-1·g^-1Cat. 适当增大水/碳摩尔比有利于 LPG 转化为小分子气体, 但在 LPG 摩尔流量不变的情况下, 反应气中水含量过高会导致 LPG 转化率降低. 反应后催化剂的X射线衍射谱(XRD)和热重分析(TG)结果表明, Ni/Mg(Al)O催化剂优良的催化活性和反应稳定性可归因于催化剂表面Ni晶粒较高的稳定性和抗积炭性能.     

CeO2改性Cu/Al2O3催化剂上甲醇水蒸气重整制氢

研究CeO2改性Cu/Al2O3催化剂上甲醇水蒸气重整制氢反应过程,得到低温活性、氢选择性和稳定性较好的催化剂.Cu/Al2O3催化剂中添加CeO2提高了催化剂的活性和稳定性,当CeO2质量分数为20％时,催化剂活性表现最佳.在反应温度250 ℃,水醇摩尔比为1.0,液体空速为3.28 h －1条件下,甲醇转化率为95.5％,氢气选择性为100％.此外,CeO2通过促进水气转化反应降低了重整气中CO的含量.Cu/CeO2/Al2O3催化剂在200 h的寿命实验中,活性仍保持在90.0％以上,而Cu/Al2O3催化剂在100 h的寿命实验中,活性已很快下降.XRD和TPR分析及表面元素分布结果表明,铜和铈相互作用促进了铜在催化剂表面的高度分散,阻止了铜晶粒团聚、烧结,促使铜晶粒细小化,促进了铜的还原,改善了Cu/CeO2/Al2O3催化剂的性能.     

CeO2改性Cu/Al2O3催化剂上甲醇水蒸气重整制氢

研究CeO2改性Cu/Al2O3催化剂上甲醇水蒸气重整制氢反应过程,得到低温活性、氢选择性和稳定性较好的催化剂.Cu/A12O3催化剂中添加CeO2提高了催化剂的活性和稳定性,当CeO2质量分数为20%时,催化剂活性表现最佳.在反应温度250℃,水醇摩尔比为1.0,液体空速为3.28 h-1条件下,甲醇转化率为95.5%,氢气选择性为100%.此外,CeO2通过促进水气转化反应降低了重整气中CO的含量.Cu/CeO2/Al2O3催化剂在200 h的寿命实验中,活性仍保持在90.0%以上,而Cu/Al2O3催化剂在100 h的寿命实验中,活性已很快下降.XRD和TPR分析及表面元素分布结果表明,铜和铈相互作用促进了铜在催化剂表面的高度分散,阻止了铜晶粒团聚、烧结,促使铜晶粒细小化,促进了铜的还原,改善了Cu/CeO2/Al2O3催化剂的性能.     

Ni/MgAl(O) 催化剂上高温焦炉煤气中焦油组分的催化转化

 采用共沉淀-水热法合成了一系列 Ni/MgAl(O) 催化剂. 用甲苯和萘的混合物作为焦油模型化合物, 在固定床反应器上研究了该催化剂直接催化转化具有较低水蒸气/碳摩尔比的高温焦炉煤气中焦油为小分子气体的反应. 考察了催化剂组成、水蒸气/碳摩尔比和反应条件等对催化剂性能的影响. 结果表明, Mg/Al 摩尔比为 3 时 Ni/MgAl(O) 催化剂表现出最优的催化性能. 在 700~800 oC 和水蒸气/碳摩尔比为 0.68 的反应条件下, 15%Ni/Mg3Al(O) 催化剂能将甲苯和萘完全转化为 CO 和 CH4 等小分子气体. 在反应气中引入 0.05% H2S(摩尔分数) 气体的实验表明, 该催化剂在焦油催化转化反应中具有较好的抗硫能力. 另外, 在催化剂中加入少量 Pt 助剂能显著提高催化剂活性.     

Ni的引入对Pd/Al2O3催化甲烷燃烧性能的影响

采用浸渍法制备了Ni掺杂的Pd/Al2O3催化剂,考察了其低浓度甲烷催化燃烧活性和水热稳定性.结果表明,随着Ni的引入及其含量的增加,Pd/Al2O3催化剂性能明显提高,Ni含量至20%时,在0.4%CH4,4%H2O和空气平衡的原料气组成,80000h-1空速和600oC条件下反应150h后,CH4转化率仍能保持在97.5%以上.X射线衍射、H2程序升温还原、NH3程序升温脱附和透射电镜等结果表明,NiAl2O4晶相的形成改善了载体酸性和活性组分的分散度,从而提高了催化剂性能.     

低水碳比条件下 Ni/CeO2/Al2O3催化剂上液化石油气的预重整

采用硝酸盐溶液共浸渍薄水铝石制备了不同Ni含量的Ni/CeO2/Al2O3催化剂,并采用X射线衍射、N2物理吸附和程序升温还原等手段对其进行了表征.结果表明,Ni和CeO2物种之间存在较强的相瓦作用,CeO2的加入有利于NiAl2O4还原成金属Ni,而金属Ni又促进了CeO2还原并与Al2O3反应形成CeAlO3.详细...     

CeO2和Pd在Ni/γ-Al2O3催化剂中的助剂作用

采用脉冲微反技术研究了添加n型半导体氧化物CeO2及贵金属Pd对Ni/γ Al2O3催化剂上CH4积炭/CO2消炭反应性能的影响,并运用BET、TPR、CO2 TPSR及氢吸附等技术对催化剂进行了表征.结果表明, n型半导体氧化物CeO2的添加可以降低Ni/γ Al2O3催化剂上CH4裂解积炭活性,提高CO2消炭活性,添加少量贵金属Pd可以进一步改变载体Al2O3、助剂CeO2和活性组分Ni之间的相互作用,从而改善Ni/γ Al2O3催化剂的抗积炭性能.通过Ni Ce Pd/γ Al2O3催化剂上CH4积炭/CO2消炭模型对上述作用机制作出了新的解释.     

甲烷部分氧化制合成气的La2O3助Ni/MgAl2O4催化剂

 用MgO与载体Al2O3在高温下焙烧成MgAl2O4尖晶石,防止了Ni在反应过程中与载体形成NiAl2O4, 促进了Ni在载体表面的分散. 应用CODEX软件优化了La2O3在Ni/MgAl2O4催化剂中的加入量和活化温度. La2O3助Ni/MgAl2O4在本文实验条件下经100 h反应后活性和选择性均未发生变化. 程序升温烧碳结果表明,催化剂表面仅存在一种较高温度下才可除去的碳物种,它可能是石墨碳. XRD和BET结果证实,催化剂具有较高的结构稳定性. 荧光分析结果表明,在100 h的反应过程中活性组分未发生明显流失. 根据脉冲反应结果对以Niδ+-(La2O4-x)δ-作为氧的活性位和Ni0作为甲烷的活性位的直接氧化反应机理进行了初步探讨.     

乙醇水蒸气重整Co/CeO2催化剂

 采用共沉淀法制备了Co/CeO2催化剂并将其应用于乙醇水蒸气重整制氢反应,考察了活性组分含量和焙烧温度对催化剂性能的影响. 结果表明,在原料气水∶乙醇∶N2摩尔比为3∶1∶16, 空速为40 L/(g·h)和反应温度为350～600 ℃的条件下, 经650 ℃焙烧的10%Co/CeO2催化剂对乙醇水蒸气重整制氢反应具有高活性和高选择性. 在500 ℃下进行的40 h稳定性测试中,该催化剂上的乙醇转化率始终接近100%, 反应后气体中的H2含量保持在65%左右. X射线衍射表征结果显示,焙烧后催化剂的主要物相组成为Co3O4和CeO2, 二者之间存在相互作用. Co/CeO2催化剂中钴的主要存在形式包括小晶粒的钴氧化物、大晶粒Co3O4和进入CeO2晶格的钴,Co3O4含量和焙烧温度的改变可影响催化剂中钴的存在形式. 由催化剂中高分散小晶粒的钴氧化物还原所得的金属钴是关键的活性组分.     

CeO_2/Ni/Mo/SBA-15甲烷二氧化碳重整催化剂的表征和催化性能(英文)

考察了CeO2修饰及未修饰的Ni/Mo/SBA-15催化剂在CH4-CO2重整上的催化性能并采用N2吸脱附、CO2程序升温脱附、H2程序升温还原、傅里叶红外光谱、X射线衍射、扫描电子显微镜和X射线光电子能谱对催化剂进行了表征.结果表明,在常压,800oC条件下,经过100h在线评价后,Ni/Mo/SBA-15和CeO2/Ni/Mo/SBA-15催化剂仍具有高的反应活性和规整的六方介孔结构,其中CeO2修饰的CeO2/Ni/Mo/SBA-15催化剂表面没有积炭形成,表明CeO2的加入促进了Ni物种在SBA-15介孔分子筛表面的分散,从而阻止了Ce/Ni/Mo/SBA-15催化剂上Ni的烧结和积炭.     

A theoretical study of the reaction of SiH2 with C2H2 and C2D2

Potential energy surfaces of the reaction of SiH₂ and C₂H₂ (and C₂D₂) have been calculated by means of ab initio molecular orbital theory at the QCISD/6-311G++(2df, 2p)//MP2/6-31G(d, p) level with corrections for the triple excitations to the QCISD energies. The barrier heights for the two reaction channels of the adduct, thus calculated, were further utilized for the dynamical calculation of the rate constants in the framework of quantum statistical Rice-Ramsperger-Kassel theory. Contributions of the rate constants of the various pathways to the total rate constant (K_T) for the disappearance of the reactants are critically examined and compared with experiment. The pressure dependence of K_T(C₂H₂) is primarily due to the formation of silirene. K_T(C₂D₂) is consistently higher than K_T(C₂H₂). The standard heat of formation of silirene is predicted to be 72.1 ± 3 kcal/mol. Rearrangement of silirene to vinylsilylene requires an activation energy smaller than that to silylacetylene.     

低阶煤半焦利用热重在O2/CO2、O2/N2和O2/Ar气氛下燃烧特性研究

利用热重研究了两种中国西北典型低阶煤半焦的燃烧特性。探究了不同气氛（O₂/CO₂、O₂/N₂和O₂/Ar）和不同氧气浓度对其燃烧特性的影响。实验结果表明,无论是反应气氛还是氧气浓度都会对低阶煤半焦的燃烧产生影响。相比于N₂和Ar,CO₂明显有利于燃烧反应进行：当反应气氛由O₂/CO₂变为O₂/Ar时,两种不同低阶煤半焦的燃尽温度分别升高了63.7和68.8℃;而当反应气氛由O₂/CO₂变为O₂/N₂时,两种不同低阶煤半焦的燃尽温度分别升高了135.9和129.6℃。在研究范围内,氧气浓度的提高也能明显提高半焦的燃烧性能。与此同时,半焦燃烧特性的动力学分析表明,随着氧气浓度提高,两种半焦燃烧反应的表观活化能E和指前因子A均呈增大趋势。通过对E和A两者关系的分析结果表明,半焦富氧燃烧的活化能和指前因子存在动力学补偿效应。     

The geometry, vibrational frequencies, thermochemistry, quadrupole moments and electronic structure of C2Na2: Comparison with C2Li2, C2H2, C2F2 and C2Cl2

The electronic structure of Na₂C₂ is studied using ab initio electronic structure methods and is compared to the companion molecule Li₂C₂. Both the linear D_∞h and planar structures are minima on the ground state potential surface with the planar D_2h conformation being the lowest energy form, similar to Li₂C₂. At the CCSD(t) level the planar form is more stable that the linear by 11.2 kcal/mol as compared with 7.34 kcal/mol for Li₂C₂. Both molecules are significantly ionic. The vibrational frequencies, atomization energy at 0 K, D₀, and the standard enthalpy of formation, are calculated and compared to those of Li₂C₂ as well as HCCH, FCCF and ClCCCl. We find D₀ and to be 331.1 and 84.92 kcal/mol for Li₂C₂ and 298.3 and 93.25 kcal/mol for Na₂C₂. We calibrate these by calculating the same quantities for HCCH, FCCF and ClCCCl.     

Solid state photodecomposition studies of K4Ti(O2)4·2H2O, K3Ta(O2)2F4 and K2V2O3(O2)2F2

The compounds K₄Ti(O₂)₄·2H₂O, K₃Ta(O₂)₂F₄ and K₂V₂O₃(O₂)₂F₂ undergo photolysis in the solid state. The photolysis kinetics obey the parabolic rate equation p = kt^1/2 and indicate a monoexcitation process for the photolysis. These features are similar to those reported previously for peroxo complexes. The mechanism of evolution of oxygen reported earlier appears to be the same in all these solids.     

Some further studies of estertin compounds. crystal structures of [NEt4][MeO2CCH2CH2Sn(dmio)2] (dmio = 1,3-dithiole-2-one-4,5-dithiolato) and (MeO2CCH2CH2)2SnX2[X2 = I2, (NCS)2 or Cl, Br]

Estertn compounds, (MeO₂CCH₂CH₂)₂SnX₂ [X₂ = I₂ (2); X₂ = Br₂ (9); X₂ = Cl, Br (4)) or X₂ = (NCS)₂ (3)] have been obtained by halide exchange reactions of (MeO₂CCH₂CH₂)₂SnCl₂. Crystal structure determinations of 2–4 revealed chelating MeO₂CCH₂CH₂ units with distorted octahedral geometries at tin. The Sn---O bond lengths in the isothiocyanato complex, 3, are shorter [2.390(11) to 2.498(12), mean 2.439 Å], with the chelate bite angles, C---Sn---O, larger [74.3(7) to 78.2(6), mean 76.0°] than those in the halide analogues 2 and 4 [Sn---O = 2.519(2) to 2.541(8), mean 2.530 Å; C---Sn---O 72.8(3) to 73.9(4), mean 73.3°]. ¹H, ¹³C and ¹¹⁹Sn NMR and IR spectra of 2–4 and 9 were determined in CDCl₃ solution: the NMR spectra of (MeO₂CCH₂CH₂)₂SnX₂ show the following trends: (i) both δ¹H and δ¹³C, increase and (ii) both ²J (Sn---H) and ¹J(Sn---C) decrease in the sequence X₂ = (NCS)₂, Cl₂, ClBr, Br₂ and I₂. The MeO₂CCH₂CH₂ and dmio groups (dmio = 1,3-dithiole-2-one-4,5-dithiolato) are all chelating groups in (MeO₂CCH₂CH₂)₂Sn(dmio) (5). As shown by X-ray crystallography, the tin atom in the anion of solid [Q][MeO₂CCH₂CH₂Sn(dmio)₂] 6 (Q = NEt₄) forms 5 strong bonds [to C and the 4 thiolato S atoms, Sn---S 2.459(2) to 2.559(2) Å], arranged in a near trigonal bipyramidal array. There is an additional Intramolecular but weaker, interaction with the carbonyl oxygen atom [Sn---O = 3.111(5) Å]; v(C=O) = 1714 cm⁻¹ in solid 6 (Q = NEt₄). NMR spectra of 5 and 6 are also reported.     

TiO2/UV/O2和TiO2/UV/N2体系降解水中对氯硝基苯

以商用TiO₂P25为催化剂,分别在TiO₂/UV/O₂和TiO₂/UV/N₂两种体系下进行降解对氯硝基苯(pCNB)试验.采用ESR对两种体系下光催化反应形成的·OH进行测定,利用LC-MS对两种体系下反应形成的中间产物进行了定性和定量分析,最后对pCNB降解过程中氯和硝基的存在形式进行了研究.结果表明:TiO₂/UV/O₂体系的催化降解效果要明显优于TiO₂/UV/N₂体系;两种反应体系都有·OH产生,并且TiO₂/UV/O₂体系产生的·OH的量多于TiO₂/UV/N₂体系产生的·OH的量;TiO₂/UV/O₂体系形成的中间产物的种类要多于TiO₂/UV/N₂体系形成的,苯环上的氢、氯、硝基均可被·OH取代形成对硝基酚(pNP)、5-氯-2-硝基酚(5-C-2-PN)等酚类物质;两种体系下均有Cl^-和NO₂^-存在,其中Cl^-生成势与pCNB的去除势一致,只有TiO₂/UV/O₂体系中存在NO₃^-.     

Estimating the limiting reducing power of SmI2/H2O/amine and YbI2/H2O/amine by efficient reduction of unsaturated hydrocarbons

The mixture of samarium diiodide, amine, and water (SmI2/H2O/Et3N) is known to be a particularly powerful reductant, but until now the limiting reducing power has not been determined. A series of unsaturated hydrocarbons with varying half-wave reduction potentials (E(1/2) = -1.6 to -3.4 V, vs SCE) have been treated with SmI2/H2O/Et3N and YbI2/H2O/Et3N, respectively. All hydrocarbons with potentials of -2.8 V or more positive were readily reduced with SmI2/H2O/Et3N, whereas all hydrocarbons with potentials of -2.3 V or more positive were readily reduced using YbI2/H2O/Et3N. This defines limiting values of the chemical reducing power of SmI2/H2O/Et3N to -2.8 V and of YbI2/H2O/Et3N to -2.3 V vs SCE.     

Conversion of NO in NO/N2, NO/O2/N2, NO/C2H4/N2 and NO/C2H4/O2/N2 Systems by Dielectric Barrier Discharge Plasmas

An experimental study on the conversion of NO in the NO/N₂, NO/O₂/N₂, NO/C₂H₄/N₂ and NO/C₂H₄/O₂/N₂ systems has been carried out using dielectric barrier discharge (DBD) plasmas at atmospheric pressure. In the NO/N₂ system, NO decomposition to N₂ and O₂ is the dominating reaction; NO conversion to NO₂ is less significant. O₂ produced from NO decomposition was detected by an on-line mass spectrometer. With the increase of NO initial concentration, the concentration of O₂ produced decreases at 298 K, but slightly increases at 523 K. In the NO/O₂/N₂ system, NO is mainly oxidized to NO₂, but NO conversion becomes very low at 523 K and over 1.6% of O₂. In the NO/C₂H₄/N₂ system, NO is reduced to N₂ with about the same NO conversion as that in the NO/N₂ system but without NO₂ formation. In the NO/C₂H₄/O₂/N₂ system, the oxidation of NO to NO₂ is dramatically promoted. At 523 K, with the increase of the energy density, NO conversion increases rapidly first, and then almost stabilizes at 93–91% of NO conversion with 61–55% of NO₂ selectivity in the energy density range of 317–550 J L⁻¹. It finally decreases gradually at high energy density. A negligible amount of N₂O is formed in the above four systems. Of the four systems studied, NO conversion and NO₂ selectivity of the NO/C₂H₄/O₂/N₂ system are the highest, and NO/O₂/C₂H₄/N₂ system has the lowest electrical energy consumption per NO molecule converted.     

Study of plasma-polymerization deposition of C2H2/CO2/H2 onto ethylene-co-propylene rubber membranes

Ethylene-co-propylene rubber (ERP) membranes were modified by use of acetylene/carbon dioxide/hydrogen (C₂H₂/CO₂/H₂) plasma-polymerization deposition. The influence of flow rate of gases, glow discharge power and deposition time on the amount of deposition was investigated. Infrared spectroscopy and scanning electron microscopy were employed to study the structure and surface morphology of the deposited EPR membrane. The water contact angle and the permeation property were examined as well. The results showed that deposition comprises oxygen-containing groups including >C=O and –OH, the hydrophilicity of EPR membrane was therefore improved. It was also found that the permeation coefficient of plasma modified EPR membrane decreased with the increase of the amount of deposition.     

双酸体系下有序介孔SO42-/ZrO2-SiO2材料的合成

采用一锅合成法通过调变自组装过程中硫酸和盐酸的体积比,成功制备了系列介孔SO₄^2-/ZrO₂-SiO₂固体酸材料(Zr/Si物质的量为1.1).XRD、UV-Vis DRS、HR-TEM等表征结果表明,所得材料均具有高度有序的二维介孔结构及四方相氧化锆的晶体结构.氮吸附和FT-IR表征结果进一步发现,通过改变硫酸/盐酸体积比可有效调变材料比表面积、孔容、孔径及表面L酸与B酸的相对强度.与纯硅介孔分子筛SBA-15不同,此系列SO₄^2-/ZrO₂-SiO₂固体酸材料均在正戊烷的异构化反应中表现出较高的催化活性和稳定性.其原因在于,在合成过程中硫酸的加入不仅促使了酸基的形成,而且稳定了催化剂的晶体结构;盐酸的存在则保持了有序的介孔结构.由此可见,混酸合成体系有望制备出结构有序、酸性可调、催化性能优越的新型催化材料,并在众多酸催化反应中取得应用.