Characterization of pore structure in a nanoporous low-dielectric-constant thin film by neutron porosimetry and X-ray porosimetry

A small-angle neutron scattering (SANS) porosimetry technique is presented for characterization of pore structure in nanoporous thin films. The technique is applied to characterize a spin-on organosilicate low dielectric constant (low-k) material with a random pore structure. Porosimetry experiments are conducted using a "contrast match" solvent (a mixture of toluene-d8 and toluene-h8) having the same neutron scattering length density as that of the nanoporous film matrix. The film is exposed to contrast match toluene vapor in a carrier gas (air), and pores fill with liquid by capillary condensation. The partial pressure of the solvent vapor is increased stepwise from 0 (pure air) to P0 (saturated solvent vapor) and then decreased stepwise to 0 (pure air). As the solvent partial pressure increases, pores fill with liquid solvent progressively from smallest to largest. SANS measurements quantify the average size of the empty pores (those not filled with contrast match solvent). Analogous porosimetry experiments using specular X-ray reflectivity (SXR) quantify the volume fraction of solvent adsorbed at each step. Combining SXR and SANS data yields information about the pore size distribution and illustrates the size dependence of the filling process. For comparison, the pore size distribution is also calculated by application of the classical Kelvin equation to the SXR data.     

Contrast variation SANS investigation of composition distributions in mixed surfactant micelles

Small angle neutron scattering measurements have been performed on three systems (HFDeP-d5-C (N-1(1,1,2,2-tetrahydroperfluorodecanoyl)pyridinium-d5 chloride)/C16PC in 63 mM NaCl; HFDeP-d5-C/C12PC in 200 mM NaCl, and as an example of an ideally mixed system, SDS/SDS-d25 in 200 mM NaCl) containing micelles formed in a binary mixture of surfactants, in order to investigate the composition distribution of the mixed micelles. The experimental data were collected varying the contrast between the average scattering length density of micelles and aqueous solvent by changing the H2O/D2O ratio. Analysis of data includes a model-independent approach--the indirect Fourier transformation method and direct modeling-simultaneous fit at all contrasts by the scattering from micelles of equal size and shape with composition distribution and an effective interaction. It has earlier been shown (Almgren, M.; Garamus, V. M. J. Phys. Chem. B 2005, 109, 11348) that for micelles of equal size, independent of the composition, and with negligible intermicellar interactions, the scattered intensity at zero angle varies quadratically with the contrast, with the minimum intensity at the nominal match point proportional to sigma2, the variance of the micelle composition distribution. Within the regular solution framework, the composition distribution and its variance are uniquely defined by the value of the interaction parameter and the micelle aggregation number. At 25 degrees C, the first system gave sigma = 0.37, corresponding to a broad, bimodal composition distribution, the second sigma = 0.22, a broad distribution with a shallow minimum at the midpoint. For SDS/SDS-d25, we found sigma = 0.006 +/- 0.030, which is a smaller value than that of the binominal composition distribution expected for an ideally mixed system.     

Small angle neutron scattering study of demixing in micellar solutions containing CTAC and a partially fluorinated cationic surfactant

Demixing of fluorocarbon and hydrocarbon surfactants to form coexisting fluorocarbon-rich and hydrocarbon-rich micelles has been studied by small angle neutron scattering in aqueous solution, using an equimolar mixture of cetyltrimethylammonium chloride and the partially fluorinated cationic surfactant N-(1,1,2,2-tetrahydroperfluorodecanyl)pyridinium chloride, with a deuterated pyridinium headgroup. Measurements have been performed under varying experimental conditions: in both pure aqueous solutions and with salt (0.10 M NaCl), at several contrasts for neutrons obtained by varying the H(2)O/D(2)O ratio, mainly at 25 degrees C but also at 60 degrees C to promote mixing of the surfactants. The experiments show that a substantial residual scattering is retained at the solvent composition where the average scattering length density of mixed micelles would match that of the solvent. It is moreover observed that, in solutions without added salt, a prominent correlation peak observed in 100% D(2)O disappears at the match point. These observations are in accordance with a very broad composition distribution, possibly composed of two populations of mixed micelles of similar sizes but different compositions, but would not result from micelles with merely a highly inhomogeneous internal structure. Increasing the temperature from 25 to 60 degrees C reduces substantially the scattered intensity at zero angle at the match point, as expected for a less broad population of mixed micelles. In the numerical analysis, the scattering data for scattering vector q > or = 0.02 A(-1) were analyzed by the indirect Fourier transform method to give the scattering at zero angle. From these data, the average micelle aggregation number was obtained as 76 at 25 degrees C and 54 at 60 degrees C. The contrast variation results for the intensity at zero angle give a measure of the width of the micelle distribution, which is obtained as sigma = 0.33 at the lower temperature and sigma = 0.20 at 60 degrees C. The result at the low temperature is compatible with the formation of two populations that are polydisperse (sigma = 0.07) and centered around 18 and 82%; other broad distributions cannot be excluded.     

Interactions between block copolymers and single-walled carbon nanotubes in aqueous solutions: a small-angle neutron scattering study

The amphiphilic copolymers of the Pluronic family are known to be excellent dispersants for single-walled carbon nanotubes (SWCNT) in water, especially F108 and F127, which have rather long end-blocks of poly(ethylene oxide) (PEO). In this study, the structure of the CNT/polymer hybrid formed in water is evaluated by measurements of small-angle neutron scattering (SANS) with contrast variation, as supported by cryo-transmission electron microscopy (cryo-TEM) imaging. The homogeneous, stable, inklike dispersions exhibited very small isolated bundles of carbon nanotubes in cryo-TEM images. SANS experiments were conducted at different D(2)O/H(2)O content of the dispersing solvent. The data for both systems showed surprisingly minimal intensity values at 70% D(2)O solvent composition, which is much higher than the expected value of 17% D(2)O that is based on the scattering length density (SLD) of PEO. At this near match point, the data exhibited a q(-1) power law relation of intensity to the scattering vector (q), indicating rodlike entities. Two models are evaluated, as extensions to Pederson's block copolymer micelles models. One is loosely adsorbed polymer chains on a rodlike CNT bundle. In the other, the hydrophobic block is considered to form a continuous hydrated shell on the CNT surface, whereas the hydrophilic blocks emanate into the solvent. Both models were found to fit the experimental data reasonably well. The model fit required special considerations of the tight association of water molecules around PEO chains and slight isotopic selectivity.     

Structural characterization of surfactant aggregates adsorbed in cylindrical silica nanopores

The self-assembly of nonionic surfactants in the cylindrical pores of SBA-15 silica with a pore diameter of 8 nm was studied by small-angle neutron scattering (SANS) at different solvent contrasts. The alkyl ethoxylate surfactants C(10)E(5) and C(12)E(5) exhibit strong aggregative adsorption in the pores as indicated by the sigmoidal shape of the adsorption isotherms. The SANS intensity profiles can be represented by a sum of two terms, one accounting for diffuse scattering from surfactant aggregates in the pores and the other for Bragg scattering from the pore lattice of the silica matrix. The Bragg reflections are analyzed with a form factor model in which the radial density profile of the surfactant in the pore is approximated by a two-step function. Diffuse scattering is represented by a Teubner-Strey-type scattering function which indicates a preferred distance between adsorbed surface aggregates in the pores. Our results suggest that adsorption starts with formation of discrete surface aggregates which increase in number and eventually merge to interconnected patches as the plateau value of the adsorption isotherm is approached. A grossly different behavior, viz. formation of micelles as in solution, is found for the maltoside surfactant C(10)G(2), in agreement with the observed weak adsorption of this surfactant in SBA-15.     

Observation of single-chain scattering from homopolymer blended with a triblock copolymer

A small-angle neutron scattering method has been developed to determine the chain conformation of homopolymer chains dispersed in a block copolymer matrix. Two contrast matching techniques are used to achieve this result and are demonstrated for a system based on a styrene-hydrogenated butadiene-styrene triblock copolymer and a hydrogenated butadiene homo-polymer. Composition matching uses a blend of labeled and unlabeled molecules to match the scattering density of another component. Phase matching requires a block copolymer which has been synthesized such that the scattering densities of the blocks are equal. This polymer provides a transparent matrix in which a composition-matched blend of homopolymer can be dispersed to isolate the single-chain scattering function of the homopolymer chains.     

Performance of NAA Methods in an International Interlaboratory Reference Material Characterization Campaign

An extensive database of analytical results from a recent biological matrix Reference Material Characterization Campaign permitted an intercomparison of the performances of various methods among each other and with "true" best estimate concentration values established for these materials. Six different variants of neutron activation analysis (NAA) methods were employed including: instrumental neutron activation analysis, instrumental neutron activation analysis with acid digestion, neutron activation analysis with radiochemical separation, neutron capture prompt gamma activation analysis, epithermal instrumental neutron activation analysis, and neutron activation analysis with preconcentration. The precision and accuracy performance of NAA-based analytical methods are compared with three other major techniques, atomic absorption spectrometry (AAS), atomic emission spectrometry (AES) and mass spectrometry (MS) for 28 elements in 10 natural matrix materials.     

Analytical applications of neutron depth profiling

Using a low-energy neutron beam as an isotopic probe, neutron depth profiling (NDP) provides quantitative depth profiles in nearly all solid matrix materials. Several of the light elements, such as He, Li, B, and N can be nondestructively analyzed by NDP. The information obtained using NDP is difficult if not impossible to determine by non-nuclear techniques. As a result, NDP is used collaboratively with techniques such as SIMS, RBS, FTIR, PGAA, and AES. Profiles measured by NDP are given for semiconductor and optical processing materials, and light weight alloys. Improvements in the technique are discussed with emphasis on the use of intense cold neutron beams.     

Polymeric Multiporous Materials from Fibrillar Networks

Summary: Poly(vinylidene fluoride) (PVF₂) forms thermoreversible gels with liquid alkyl diesters as well as with camphor which is solid at room temperature. The diesters are replaced by another low boiling solvent cyclohexane by solvent exchange technique while camphor is dried just by exposing the material in vacuum to yield highly porous materials. Nano pores are generated as a result of solvent removal from polymer-solvent intercalates whereas macropores are contributed by percolation of polymer fibrils. The porosity thus created covers a wide range from 3 nm to 400 µm producing multiporous materials. Pores greater than 6 nm are measured by mercury intrusion porosimetry (MIP) and pores of diameter less than 6 nm is observed by N₂ adsorption porosimetry. The dried samples show two melting regions, low temperature hump for porous portion and high temperature peak for bulk portion. The porous materials have the ability to absorb water-soluble herbicides from around 10-ppm aqueous solution as indicated in UV spectrophotometric experiment.     

A perspective on MALDI alternatives—total solvent‐free analysis and electron transfer dissociation of highly charged ions by laserspray ionization

Progress in research is hindered by analytical limitations, especially in biological areas in which sensitivity and dynamic range are critical to success. Inherent difficulties of characterization associated with complexity arising from heterogeneity of various materials including topologies (isomeric composition) and insolubility also limit progress. For this reason, we are developing methods for total solvent‐free analysis by mass spectrometry consisting of solvent‐free ionization followed by solvent‐free gas‐phase separation. We also recently constructed a novel matrix‐assisted laser desorption ionization (MALDI) source that provides a simple, practical and sensitive way of producing highly charged ions by laserspray ionization (LSI) or singly charged ions commonly observed with MALDI by choice of matrix or matrix preparation. This is the first ionization source with such freedom—an extremely powerful analytical ‘switch’. Multiply charged LSI ions allow molecules exceeding the mass‐to‐charge range of the instrument to be observed and permit for the first time electron transfer dissociation fragment ion analysis. Copyright © 2010 John Wiley & Sons, Ltd.     

Non-destructive analysis of objects using neutron resonance capture

Summary In this paper we discuss an analytical method, neutron-resonance-capture-analysis (NRCA), which uses the energies of resonances to recognize elements. These resonances are observed by the time-of-flight technique using a pulsed neutron beam at the GELINA facility in Geel (Belgium). The prompt γ-radiation, emitted after a neutron is captured, is used to signal that capture occurred. Areas of resonance peaks are used to evaluate the elemental composition of objects and materials quantitatively. A comparison of NRCA and PGAA is made and elucidated with experimental data resulting from measurements of bronze artefacts at GELINA and at the Budapest Neutron Centre.     

Advances in contrast variation for macromolecular structure determination by polarized neutron scattering and anomalous dispersion of synchrotron X-rays

Contrast variation for macromolecular structure determination is usually achieved by isomorphous replacement of 1-H by 2-H (D) using small-angle neutron scattering (SANS). This is particularly easy in aqueous solvents. By adding heavy water the contrast of dissolved proteins, nucleic acids and membranes changes drastically. It is the region inaccesible to solvent molecules, which acts as a label. Measurements of the scattering intensity at three different scattering densities of a solvent yields the three basic scattering functions. The contrast dependence of the radius of gyration receives particular interest. More recently smaller labels have been used. Their dimensions are smaller than those of the total particle by an order of magnitude. They are used for in situ structure determination of the labelled region. Contrast variation of the labelled region can be achieved by gradual deuteration of the label. Again, the measurements have to be done at three different contrasts in order to separate the scattering function of the label. - By eliminating any intramolecular scattering density fluctuation (K. Nierhaus' principle of the ‘transparent’ ribosome) the structure of selectively labelled ribosomal proteins can be determined in situ by using only one derivative. Spin contrast variation of biomolecules relies on the nuclear spin dependence of neutron scattering by protons and, to a smaller extent, by deuterons. It is particularly well suited for labels rich in protons embedded in a deuterated matrix. Variation of the target polarization yields the three basic scattering functions from the same sample. In collaboration with CERN and ILL, a special set-up for spin contrast variation has been installed at the reactor FRG1 of the GKSS Research Centre at Geesthacht. The dynamic nuclear polarization of proton spins in proteins, nucleic acids and ribosomes is achieved in the presence of Cr(V) at T = 0.4 K, H = 2.5 T and 4 mm microwave irradiation. Within two hours, the proton polarization will reach more than 70 % in favourable cases. Measurements have been carried out with various proteins, transfer ribonucleic acid (tRNA) and the large subunit of E.coli ribosomes, the latter also with its total protein deuterated (i.e. ribosomal ribonucleic acid (rRNA) acts as a label). There is an agreement between the nuclear spin polarization of protons and deuterons measured by NMR and the nuclear spin dependent change of polarized small-angle neutron scattering. The results of spin contrast variation experiments are compared with those obtained from near-edge anomalous X-ray scattering using synchrotron radiation. Particular attention is given to the anomalous dispersion of light elements, like sulfur, which tend to show a strong dependence on the chemical bonding of the atom. In purple membrane, the anomalous scattering of sulfur in protein, bound to methionine and sulfates in the lipid matrix has been determined separately.     

Microstructure of supercritical CO2-in-water microemulsions: a systematic contrast variation study

Microemulsions of the type H(2)O-scCO(2)-surfactant are potential candidates for novel solvent mixtures in the field of green chemistry. Furthermore, scCO(2)-microemulsions are highly interesting from a fundamental point of view since their properties such as the bending elastic constants can be strongly influenced solely by varying the pressure without changing the components. With this motivation we studied the phase behavior and the microstructure of water-rich scCO(2)-microemulsions. Such microemulsions were formulated using the technical grade non-ionic surfactants Zonyl FSO 100 and Zonyl FSN 100. At elevated pressures the temperature dependent phase behavior of these systems follows the general patterns of non-ionic microemulsions. Small angle neutron scattering experiments were conducted to determine the length scales and the topology of the microstructure of these systems. Having determined the exact scattering length densities and the composition of the respective sub-phases by a systematic contrast variation we could show that these systems consist of CO(2)-swollen microemulsion droplets that are dispersed in a continuous aqueous-phase. The scattering data were analyzed using a newly derived form factor for polydisperse, spherical core/shell particles with diffuse interfaces. The underlying analytical density profiles could be confirmed applying the model-free Generalized Indirect Fourier Transformation (GIFT) to the scattering data. Following the general patterns of non-ionic microemulsions the radius of the microemulsion droplets is found to increase almost linearly upon the addition of CO(2).     

Rapid determination of molecular parameters of synthetic polymers by precipitation/redissolution high‐performance liquid chromatography using “molded” monolithic column

Rapid high‐performance liquid chromatography (HPLC) of polystyrenes, poly(methyl methacrylates), poly(vinyl acetates), and polybutadienes using a monolithic 50 × 4.6 mm i.d. poly(styrene‐co‐divinylbenzene) column have been carried out. The separation process involves precipitation of the macromolecules on the macroporous monolithic column followed by progressive elution utilizing a gradient of the mobile phase. Depending on the character of the separated polymer, solvent gradients were composed of a poor solvent such as water, methanol, or hexane and increasing amounts of a good solvent such as THF or dichloromethane. Monolithic columns are ideally suited for this technique because convection through the large pores of the monolith enhances the mass transport of large polymer molecules and accelerates the separation process. Separation conditions including the selection of a specific pair of solvent and precipitant, flow rate, and gradient steepness were optimized for the rapid HPLC separations of various polymers that differed broadly in their molecular weights. Excellent separations were obtained demonstrating that the precipitation‐redissolution technique is a suitable alternative to size‐exclusion chromatography (SEC). The molecular weight parameters calculated from the HPLC data match well those obtained by SEC. However, compared to SEC, the determination of molecular parameters using gradient elution could be achieved at comparable flow rates in a much shorter period of time, typically in about 1 min. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2767–2778, 2000     

Mössbauer and NMR study of the N-d-gluconylglycine complex of dimethyltin(IV) and the ascorbic acid–chloride mixed complex of iron(II) in solutions fixed as nanosize droplets in solid matrixes

Combined NMR and Mössbauer investigations were performed on two coordination chemical models of biological interest: an aqueous solution of the N-d-gluconylglycine complex of dimethyltin(IV), and methanolic and aqueous solutions of the ascorbic acid–chloride mixed complex of iron(II). When these solutions were fixed as nanosize droplets in solid matrixes, significant changes occurred in both the structure and the composition of the coordination spheres of the central atoms in the complexes situated in the bulk positions with no direct connection to the surfaces of the holes in the matrix. The phenomenon was attributed to the significant decrease in solvent activity in the pores of the matrix due to the appreciable amount of surface-bound solvent in the system. The model mimics coordination chemical systems in cell tissues.     

State of hydrogen in idealized carbon slitlike nanopores at 77 K

The purpose of this letter is to clarify recent findings and answer to the question: "What is the state of hydrogen in carbon slitlike pores at 77 K?" For this purpose, we determined the volumetric density of hydrogen in idealized carbon pores of molecular dimension at 77 K and pressure up to 1 MPa. We used quantum corrected grand canonical Monte Carlo simulation. We recognized the highest volumetric density of confined hydrogen (around 71% of hydrogen liquid at boiling point) for effective pore width 5.6 angstroms (H* = 3.04) in the considered pressure range. Our computational results are in agreement with the calculations performed by Wang and Johnson and Rzepka et al. In contrast, we did not observe the high volumetric density of hydrogen in slitlike carbon pores exceeding the density of hydrogen liquid at the boiling point as was reported by Jagiello and Thommes. Moreover, we obtained qualitative agreement between the simulation results and some experimental findings reported by Nijkamp.     

Nanostructure of a "carpet"-like dense layer/polyelectrolyte brush layer in a block copolymer monolayer at the air-water interface

The "carpet"/brush double layer structure in the polyelectrolyte layer in the amphiphilic diblock copolymer monolayer at the air-water interface was quantitatively studied by in situ neutron reflectometry in addition to X-ray reflectivity measurements. As a result of the higher contrast between polyelectrolyte [poly(methacrylic acid)] and solvent (D(2)O) for the neutron, the brush structure could be estimated more accurately as a function of surface pressure, that is, brush density. The thickness of the carpet layer, which is thought to be formed to reduce the interfacial free energy between water and the hydrophobic layer, was almost constant at 10-20 A at any surface pressure studied. Growth was clearly observed in the whole brush length with increasing surface pressure, and it was estimated to be almost 60% of the full-stretch length of the ionic polymer chain. Furthermore, by the comparison of density profiles by neutron and X-ray reflectometry, an anomalous hydration was suggested.     

Diffusive solvent dynamics in a polymer gel electrolyte studied by quasielastic neutron scattering

A quasielastic neutron scattering study has been performed on a polymer gel electrolyte consisting of lithium perchlorate dissolved in ethylene carbonate/propylene carbonate and stabilized with poly(methyl methacrylate). The dynamics of the solvent, which is crucial for the ion conduction in this system, was probed using the hydrogen/deuterium contrast variation method with nondeuterated solvent and a deuterated polymer matrix. Two relaxation processes of the solvent were studied in the 10-400 microeV range at different temperatures. From analysis of the momentum transfer dependence of the processes we conclude that the faster process ( approximately 100 microeV) is related to rotational diffusion of the solvent and the slower process ( approximately 10 microeV) to translational diffusion of the solvent. The translational diffusion is found to be similar to the diffusion in the corresponding liquid electrolyte at short distances, but geometrically constrained by the polymer matrix at distances beyond approximately 5 A. The study indicates that the hindered diffusion of the solvent on a length scale of the polymer network interchain distance ( approximately 5-20 A) is sufficient to explain the reduced macroscopic diffusivity and ion conductivity of the gel electrolyte compared to the liquid electrolyte.     

Comparison of single- and dual-axis rotation techniques for total nitrogen in explosives by fast neutron activation analysis

Total nitrogen content in organic explosives and relate materials can be determined by fast neutron activation analysis (FNAA) to an absolute accuracy comparable to wet chemical or combustion analysis, i.e. to within less than 0.1% N. This is accomplished by dual-axis rotation of the sample and a carefully selected reference standard during neutron irradiation. The optimum reference standard is one of similar composition, density, weight and volume to the sample being analyzed. Rapid pneumatic transfer of organic explosives of low mechanical shock sensitivity poses no special safety problems. For large numbers of individual samples, a multiple sample irradiation system with single-axis rotation can be used for more rapid analysis. Precision and accuracy by this method are not as good as compared to a dual-axis rotation technique. Absolute accuracy for total nitrogen is in the order of 0.2%. This method is useful only for those reactions where the half-life of the product is long enough to allow for sequential counting of multiple samples for a single irradiation.     

Accuracy in standards preparation for neutron activation analysis

Errors in preparing standards, especially multielemental standards, are extremely important if accurate results are desired from neutron activation analysis (NAA). It is often convenient to prepare standards for NAA from single or multi-element solutions which are then deposited onto (or into) a suitable matrix, such as filter paper or quartz vials. There are many potential sources of error in preparing single-element standards including: impurities and non-stoichiometric composition of the element or compound used to prepare the standard solutions; evaporative losses of solvent; inaccuracy of calibration, and imprecision of the pipettes used; moisture content of elements or compounds used; contamination from reagents, equipment, laboratory environment, or final matrix of the standard; instability of standard solutions (i.e., to losses via precipitation or adsorption), and losses of volatile elements during dissolution and/or irradiation. Additional sources of error in preparing multielement standards includes: instability of mixed, multielement solutions, and cross-contamination of one element by the addition of a second element. Procedures previously used by the author at NIST to prepare multielement standards with concentrations accurate to about one percent are described. Additional techniques needed to prepare multielement standards with accuracies better than 1 percent will be discussed.