Microscopic probing of the size dependence in hydrophobic solvation

We report small angle x-ray scattering data demonstrating the direct experimental microscopic observation of the small-to-large crossover behavior of hydrophobic effects in hydrophobic solvation. By increasing the side chain length of amphiphilic tetraalkyl-ammonium (C(n)H(2n+1))(4)N(+) (R(4)N(+)) cations in aqueous solution we observe diffraction peaks indicating association between cations at a solute size between 4.4 and 5 A?, which show temperature dependence dominated by hydrophobic attraction. Using O K-edge x-ray absorption we show that small solutes affect hydrogen bonding in water similar to a temperature decrease, while large solutes affect water similar to a temperature increase. Molecular dynamics simulations support, and provide further insight into, the origin of the experimental observations.     

Temperature dependence of dimerization and dewetting of large-scale hydrophobes: a molecular dynamics study

We studied by molecular dynamics simulations the temperature dependence of hydrophobic association and drying transition of large-scale solutes. Similar to the behavior of small solutes, we found the association process to be characterized by a large negative heat capacity change. The origin of this large change in heat capacity is the high fragility of hydrogen bonds between water molecules at the interface with hydrophobic solutes; an increase in temperature breaks more hydrogen bonds at the interface than in the bulk. With increasing temperature, both entropy and enthalpy changes for association strongly decrease, while the change in free energy weakly varies, exhibiting a small minimum at high temperatures. At around T=Ts=360 K, the change in entropy is zero, a behavior similar to the solvation of small nonpolar solutes. Unexpectedly, we find that at Ts, there is still a substantial orientational ordering of the interfacial water molecules relative to the bulk. Nevertheless, at this point, the change in entropy vanishes due to a compensating contribution of translational entropy. Thus, at Ts, there is rotational order and translational disorder of the interfacial water relative to bulk water. In addition, we studied the temperature dependence of the drying-wetting transition. By calculating the contact angle of water on the hydrophobic surface at different temperatures, we compared the critical distance observed in the simulations with the critical distance predicted by macroscopic theory. Although the deviations of the predicted from the observed values are very small (8-23%), there seems to be an increase in the deviations with an increase in temperature. We suggest that these deviations emerge due to increased fluctuations, characterizing finite systems, as the temperature increases.     

The influence of urea and trimethylamine-N-oxide on hydrophobic interactions

Molecular dynamics simulations are used to obtain potentials of mean force for pairs of neopentane molecules immersed in aqueous solutions containing urea, trimethylamine-N-oxide (TMAO), or both solutes at once. It is shown that the hydrophobic attraction acting between neopentane pairs in pure water and in water-urea solution is completely destroyed by the addition of TMAO. This strongly suggests that TMAO does not counter the protein denaturing effect of urea by enhancing hydrophobic attraction amongst nonpolar groups.     

Hydrogen bond strength and network structure effects on hydration of non-polar molecules

We measure the solvation free energy, Δμ*, for hard spheres and Lennard-Jones particles in a number of artificial liquids made from modified water models. These liquids have reduced hydrogen bond strengths or altered bond angles. By measuring Δμ* for a number of state points at P = 1 bar and different temperatures, we obtain solvation entropies and enthalpies, which are related to the temperature dependence of the solubilities. By resolving the solvation entropy into the sum of the direct solute-solvent interaction and a term depending on the solvent reorganisation enthalpy we show that, although the hydrophobic effect in water at 300 K arises mainly from the small molecular size, its temperature dependence is anomalously low because the reorganisation enthalpy of liquid water is unusually small. We attribute this to the strong tetrahedral network which results from both the molecular geometry and the hydrogen bond strength.     

Water's hydrogen bonds in the hydrophobic effect: a simple model

We propose a simple analytical model to account for water's hydrogen bonds in the hydrophobic effect. It is based on computing a mean-field partition function for a water molecule in the first solvation shell around a solute molecule. The model treats the orientational restrictions from hydrogen bonding, and utilizes quantities that can be obtained from bulk water simulations. We illustrate the principles in a 2-dimensional Mercedes-Benz-like model. Our model gives good predictions for the heat capacity of hydrophobic solvation, reproduces the solvation energies and entropies at different temperatures with only one fitting parameter, and accounts for the solute size dependence of the hydrophobic effect. Our model supports the view that water's hydrogen bonding propensity determines the temperature dependence of the hydrophobic effect. It explains the puzzling experimental observation that dissolving a nonpolar solute in hot water has positive entropy.     

Competition of hydrophobic and Coulombic interactions between nanosized solutes

The solvation of charged, nanometer-sized spherical solutes in water, and the effective, solvent-induced force between two such solutes are investigated by constant temperature and pressure molecular dynamics simulations of model solutes carrying various charge patterns. The results for neutral solutes agree well with earlier findings, and with predictions of simple macroscopic considerations: substantial hydrophobic attraction may be traced back to strong depletion ("drying") of the solvent between the solutes. This hydrophobic attraction is strongly reduced when the solutes are uniformly charged, and the total force becomes repulsive at sufficiently high charge; there is a significant asymmetry between anionic and cationic solute pairs, the latter experiencing a lesser hydrophobic attraction. The situation becomes more complex when the solutes carry discrete (rather than uniform) charge patterns. Due to antagonistic effects of the resulting hydrophilic and hydrophobic "patches" on the solvent molecules, water is once more significantly depleted around the solutes, and the effective interaction reverts to being mainly attractive, despite the direct electrostatic repulsion between solutes. Examination of a highly coarse-grained configurational probability density shows that the relative orientation of the two solutes is very different in explicit solvent, compared to the prediction of the crude implicit solvent representation. The present study strongly suggests that a realistic modeling of the charge distribution on the surface of globular proteins, as well as the molecular treatment of water, are essential prerequisites for any reliable study of protein aggregation.     

Molecular origin of the hydrophobic effect: analysis using the angle-dependent integral equation theory

The molecular origin of the hydrophobic effect is investigated using the angle-dependent integral equation theory combined with the multipolar water model. The thermodynamic quantities of solvation (excess quantities) of a nonpolar solute are decomposed into the translational and orientational contributions. The translational contributions are substantially larger with the result that the temperature dependence of the solute solubility, for example, can well be reproduced by a model simple fluid where the particles interact through strongly attractive potential such as water and the particle size is as small as that of water. The thermodynamic quantities of solvation for carbon tetrachloride, whose molecular size is approximately 1.9 times larger than that of water, are roughly an order of magnitude smaller than those for water and extremely insensitive to the strength of solvent-solvent attractive interaction and the temperature. The orientational contributions to the solvation energy and entropy are further decomposed into the solute-water pair correlation terms and the solute-water-water triplet and higher-order correlation terms. It is argued that the formation of highly ordered structure arising from the enhanced hydrogen bonding does not occur in the vicinity of the solute. Our proposition is that the hydrophobic effect is ascribed to the interplay of the exceptionally small molecular size and the strongly attractive interaction of water, and not necessarily to its hydrogen-bonding properties.     

Hydrophobic interactions in urea-trimethylamine-N-oxide solutions

The influence of osmolytes urea and trimethylamine- N-oxide (TMAO) on hydrophobic interactions is investigated employing molecular dynamics simulations. These osmolytes are of interest because of their opposing influence on proteins in solution; the denaturing effect of urea can be countered with TMAO. A neopentane pair is used to model typical nonpolar entities. Binary water-urea and water-TMAO as well as ternary water-urea-TMAO systems are considered. Neopentane-neopentane potentials of mean force, neopentane-water, and neopentane-osmolyte distribution functions are reported. Urea is found to have only modest influence on the neopentane-neopentane potential of mean force, but the hydrophobic attraction is completely destroyed by the presence of TMAO. It is shown that TMAO tends to act as a simple "surfactant" displacing water and urea (if it is present) from the first solvation shell of neopentane. It is likely the surfactant-like influence of TMAO that accounts for the elimination of the hydrophobic attraction. The implications of our results for explanations of the action of TMAO in protein solutions are discussed.     

Pair-correlation entropy of hydrophobic hydration: decomposition into translational and orientational contributions and analysis of solute-size effects

We develop an efficient method to evaluate the translational and orientational contributions to the solute-water pair-correlation entropy that is a major component of the hydration entropy. A water molecule is modeled as a hard sphere of diameter dS=0.28 nm in which a point dipole and a point quadrupole of tetrahedral symmetry are embedded. A hard sphere of diameter dM, a hydrophobic solute, is immersed at infinite dilution in the model water. The pair-correlation entropy is decomposed into the translational and orientational contributions in an analytical manner using the angle-dependent Ornstein-Zernike integral equation theory. The two contributions are calculated for solutes with a variety of sizes (0.6相似文献   

Filled and empty states of carbon nanotubes in water: Dependence on nanotube diameter, wall thickness and dispersion interactions

We have carried out a series of molecular dynamics simulations of water containing a narrow carbon nanotube as a solute to investigate the filling and emptying of the nanotube and also the modifications of the density and hydrogen bond distributions of water inside and also in the vicinity of the outer surfaces of the nanotube. Our primary goal is to look at the effects of varying nanotube diameter, wall thickness and also solute-solvent interactions on the solvent structure in the confined region also near the outer surfaces of the solute. The thickness of the walls is varied by considering single and multi-walled nanotubes and the interaction potential is varied by tuning the attractive strength of the 12–6 pair interaction potential between a carbon atom of the nanotubes and a water molecule. The calculations are done for many different values of the tuning parameter ranging from fully Lennard-Jones to pure repulsive pair interactions. It is found that both the solvation characteristics and hydrogen bond distributions can depend rather strongly on the strength of the attractive part of the solute-water interaction potential. The thickness of the nanotube wall, however, is found to have only minor effects on the density profiles, hydrogen bond network and the wetting characteristics. This indicates that the long range electrostatic interactions between water molecules inside and on the outer side of the nanotube do not make any significant contribution to the overall solvation structure of these hydrophobic solutes. The solvation characteristics are primarily determined by the balance between the loss of energy due to hydrogen bond network disruption, cavity repulsion potential and offset of the same by attractive component of the solute-water interactions. Our studies with different system sizes show that the essential features of wetting and dewetting characteristics of narrow nanotubes for different diameter and interaction potentials are also present in relatively smaller systems consisting of about five hundred molecules. We dedicate this work to Professor Debashis Mukherjee on his 60th Birthday.     

Entropy convergence in the hydration thermodynamics of n-alcohols

Using experimental data from the literature, entropy convergence in the hydration thermodynamics of n-alcohols is shown to occur at about 125 degrees C. The phenomenon is reproduced in a more-than-qualitative manner by means of a theoretical approach that accounts for the entropy contributions associated with (a) creation of a cavity in water, (b) turning on solute-water van der Waals interactions, and (c) turning on the solute-water H-bonding potential. The density of water and the effective size of water molecules with their temperature dependence play the pivotal role for the occurrence of entropy convergence, together with the property of the alcohol hydroxyl group to form the same number of H-bonds with water molecules regardless of the length of the alkyl chain.     

Simple physics-based analytical formulas for the potentials of mean force for the interaction of amino acid side chains in water. 1. Approximate expression for the free energy of hydrophobic association based on a Gaussian-overlap model

A physics-based model is proposed to derive approximate analytical expressions for the cavity component of the free energy of hydrophobic association of spherical and spheroidal solutes in water. The model is based on the difference between the number and context of the water molecules in the hydration sphere of a hydrophobic dimer and of two isolated hydrophobic solutes. It is assumed that the water molecules touching the convex part of the molecular surface of the dimer and those in the hydration spheres of the monomers contribute equally to the free energy of solvation, and those touching the saddle part of the molecular surface of the dimer result in a more pronounced increase in free energy because of their more restricted mobility (entropy loss) and fewer favorable electrostatic interactions with other water molecules. The density of water in the hydration sphere around a single solute particle is approximated by the derivative of a Gaussian centered on the solute molecule with respect to its standard deviation. On the basis of this approximation, the number of water molecules in different parts of the hydration sphere of the dimer is expressed in terms of the first and the second mixed derivatives of the two Gaussians centered on the first and second solute molecules, respectively, with respect to the standard deviations of these Gaussians, and plausible analytical expressions for the cavity component of the hydrophobic-association energy of spherical and spheroidal solutes are introduced. As opposed to earlier hydration-shell models, our expressions reproduce the desolvation maxima in the potentials of mean force of pairs of nonpolar solutes in water, and their advantage over the models based on molecular-surface area is that they have continuous gradients in the coordinates of solute centers.     

One-dimensional model for water and aqueous solutions. II. Solvation of inert solutes in water

The two one-dimensional models introduced in Part I are used to study the thermodynamics of solvation of inert solutes in water. It is shown that the anomalously large Gibbs energy of solvation of inert solutes in water, on one hand, and the large negative entropy of solvation, on the other hand, arise from different molecular sources. While the primitive model can give rise to a large positive solvation Gibbs energy, it fails to show large negative entropy and enthalpy of solvation. It is remarkable that the primitive cluster model can show both the large positive Gibbs energy and enthalpy of solvation.     

Pathway dependence of the efficiency of calculating free energy and entropy of solute–solute association in water

In this study we investigate two alternative pathways to compute the free energy and the entropy of small molecule association (ΔF_assoc and ΔS_assoc) in water. The first route (direct pathway) uses thermodynamic integration as function of the distance R between the solutes. The mean force and the mean covariance of the force with the energy in solution are calculated from molecular dynamics simulation followed by integration of these quantities with respect to the reaction coordinate R. The alternative approach examined (solvation pathway) would first remove the solutes from the solution using thermodynamic integration as function of a solvation coupling parameter λ, change the solute–solute distance in vacuo and then solvate back the solute pair at the new separation distance. The system studied was a pair of CH₄ molecules in water. We investigate the influence of the CH₄–water interaction strength on the obtained ΔF_assoc and ΔS_assoc values by changing van der Waals and Coulomb interaction and evaluated the accuracy and efficiency for the two pathways. We find that the direct route seems more suitable for the calculation of free energies of hydrophobic solutes while the solvation pathway performs better when calculating entropy changes for solutes that have a stronger interaction with the solvent.     

Hydrophobic solvation of Gay-Berne particles in modified water models

The solvation of large hydrophobic solutes, modeled as repulsive and attractive Gay-Berne oblate ellipsoids, is characterized in several modified water liquids using the SPC/E model as the reference water fluid. We find that small amounts of attraction between the Gay-Berne particle and any model fluid result in wetting of the hydrophobic surface. However, significant differences are found among the modified and SPC/E water models and the critical distances in which they dewet the hydrophobic surfaces of pairs of repulsive Gay-Berne particles. We find that the dewetting trends for repulsive Gay-Berne particles in the various model liquids correlate directly with their surface tensions, the widths of the interfaces they form, and the openness of their network structure. The largest critical separations are found in liquids with the smallest surface tensions and the broadest interfaces as measured by the Egelstaff-Widom length.     

Anisotropic solvent model of the lipid bilayer. 2. Energetics of insertion of small molecules, peptides, and proteins in membranes

A new computational approach to calculating binding energies and spatial positions of small molecules, peptides, and proteins in the lipid bilayer has been developed. The method combines an anisotropic solvent representation of the lipid bilayer and universal solvation model, which predicts transfer energies of molecules from water to an arbitrary medium with defined polarity properties. The universal solvation model accounts for hydrophobic, van der Waals, hydrogen-bonding, and electrostatic solute-solvent interactions. The lipid bilayer is represented as a fluid anisotropic environment described by profiles of dielectric constant (ε), solvatochromic dipolarity parameter (π*), and hydrogen bonding acidity and basicity parameters (α and β). The polarity profiles were calculated using published distributions of quasi-molecular segments of lipids determined by neutron and X-ray scattering for DOPC bilayer and spin-labeling data that define concentration of water in the lipid acyl chain region. The model also accounts for the preferential solvation of charges and polar groups by water and includes the effect of the hydrophobic mismatch for transmembrane proteins. The method was tested on calculations of binding energies and preferential positions in membranes for small-molecules, peptides and peripheral membrane proteins that have been experimentally studied. The new theoretical approach was implemented in a new version (2.0) of our PPM program and applied for the large-scale calculations of spatial positions in membranes of more than 1000 peripheral and integral proteins. The results of calculations are deposited in the updated OPM database ( http://opm.phar.umich.edu ).     

Simulations of solvation free energies and solubilities in supercritical solvents

Computer simulations are used to study solvation free energies and solubilities in supercritical solvents. Solvation free energies are calculated using the particle insertion method. The equilibrium solvent configurations required for these calculations are based on molecular dynamics simulations employing model solvent potentials previously tuned to reproduce liquid-vapor coexistence properties of the fluids Xe, C(2)H(6), CO(2), and CHF(3). Solutes are represented by all-atom potentials based on ab initio calculations and the OPLS-AA parameter set. Without any tuning of the intermolecular potentials, such calculations are found to reproduce the solvation free energies of a variety of typical solid solutes with an average accuracy of +/-2 kJmol. Further calculations on simple model solutes are also used to explore general aspects of solvation free energies in supercritical solvents. Comparisons of solutes in Lennard-Jones and hard-sphere representations of Xe show that solvation free energies and thus solubilities are not significantly influenced by solvent density fluctuations near the critical point. The solvation enthalpy and entropy do couple to these fluctuations and diverge similarly to solute partial molar volumes. Solvation free energies are also found to be little affected by the local density augmentation characteristic of the compressible regime. In contrast to solute-solvent interaction energies, which often provide a direct measure of local solvent densities, solvation free energies are remarkably insensitive to the presence of local density augmentation.