应用增量理论考虑应变硬化效应包辛格效应和温度对机械性质影响的自增强厚壁圆筒分析

本文提出的采用增量理论的分析模型和方法可以定量分析应变硬化、包辛格效应和材料机械性质随温度变化等因素对自增强厚壁圆筒中残余应力和操作应力分布的影响.厚壁圆筒看成由N个同轴薄壁圆筒套在一起组成的构件;采用包括弹性、塑性和温度应变的增量型本构关系和相容条件导出了自增强圆筒的基本方程;设计了计算机程序并给出了分析实例。分析结果表明,应变硬化会减小塑性区并降低残余应力;包辛格效应使反向屈服容易出现;温度升高将使残余应力和热应力松驰.     

Nonsimilar Boundary Layer Analysis of Free Convection Heat Transfer Over a Vertical Cylinder in Bidisperse Porous Media

This work presents a boundary layer analysis for the free convection heat transfer from a vertical cylinder in bidisperse porous media with constant wall temperature. A boundary layer analysis and the two-velocity two-temperature formulation are used to derive the nonsimilar governing equations. The transformed governing equations are solved by the cubic spline collocation method to yield computationally efficient numerical solutions. The effects of inter-phase heat transfer parameter, modified thermal conductivity ratio, and permeability ratio on the heat transfer and flow characteristics are studied. Results show that an increase in the modified thermal conductivity ratio and the permeability ratio can effectively enhance the free convection heat transfer of the vertical cylinder in a bidisperse porous medium. Moreover, the thermal nonequilibrium effects are strong for low values of the inter-phase heat transfer parameter.     

On the Hydrodynamics and Heat Convection of an Impinging External Flow Upon a Cylinder with Transpiration and Embedded in a Porous Medium

This paper extends the existing studies of heat convection by an external flow impinging upon a flat porous insert to that on a circular cylinder inside a porous medium. The surface of the cylinder is subject to constant temperature and can include uniform or non-uniform transpiration. These cylindrical configurations are introduced in the analyses of stagnation-point flows in porous media for the first time. The equations governing steady transport of momentum and thermal energy in porous media are reduced to simpler nonlinear differential equations and subsequently solved numerically. This reveals the dimensionless velocity and temperature fields of the stagnation-point flow, as well as the Nusselt number and shear stress on the surface of the cylinder. The results show that transpiration on the surface of the cylinder and Reynolds number of the external flow dominate the fluid dynamics and heat transfer problems. In particular, non-uniform transpiration is shown to significantly affect the thermal and hydrodynamic responses of the system in the circumferential direction. However, the permeability and porosity of the porous medium are found to have relatively smaller influences.     

MHD effects on free convective flow over moving semi-infinite vertical cylinder with temperature oscillation

Numerical solutions of magnetodynamics(MHD) effects on the free convective flow of an incompressible viscous fluid past a moving semi-infinite vertical cylinder with temperature oscillation are presented.The dimensionless,unsteady,non-linear,and coupled governing partial differential equations are solved by using an implicit finite difference method of the Crank-Nicolson type.The velocity,temperature,and concentration profiles are studied for various parameters.The local skin-friction,the average skin-fr...     

Analysis of Heat and Mass Transfer in a Vertical Annular Porous Cylinder Using FEM

The present study is intended to study heat and mass transfer in a vertical annular cylinder embedded with saturated porous medium. The inner surface of cylinder is maintained at uniform wall temperature and uniform wall concentration. The governing partial differential equations are non-dimensionalised and solved by using finite element method (FEM). The porous medium is discritised using triangular elements with uneven element size. Large number of smaller-sized elements are placed near the walls of the annulus to capture the smallest variation in solution parameters. The results are reported for both aiding and opposing flows. The effects of various non-dimensional numbers such as buoyancy ratio, Lewis number, Rayleigh number, aspect ratio, etc on heat and mass transfer are discussed. The temperature and concentration profiles are presented.     

Flow of couple stress fluid with variable thermal conductivity

The steady flow and heat transfer of a couple stress fluid due to an inclined stretching cylinder are analyzed. The thermal conductivity is assumed to be temperature dependent. The governing equations for the flow and heat transfer are transformed into ordinary differential equations. Series solutions of the resulting problem are computed. The effects of various interested parameters, e.g., the couple stress parameter, the angle of inclination, the mixed convection parameter, the Prandtl number, the Reynolds number, the radiation parameter, and the variable thermal conductivity parameter, are illustrated. The skin friction coefficient and the local Nusselt number are computed and analyzed. It is observed that the heat transfer rate at the surface increases while the velocity and the shear stress decrease when the couple stress parameter and the Reynolds number increase. The temperature increases when the Reynolds number increases.     

Separation of species of a binary fluid mixture confined between two concentric rotating circular cylinders in presence of a strong radial magnetic field

The effect of a radial magnetic field on separation of a binary mixture of incompressible viscous thermally and electrically conducting fluids confined between two concentric rotating circular cylinders with different angular velocity is examined. The equations governing the motion, temperature and concentration in cylindrical polar coordinate are solved analytically. The solution obtained in closed form for concentration distribution is plotted against the radial distances from the surface of the inner circular cylinder for various values of non-dimensional parameters. It is found that the non-dimensional parameters viz. the Hartmann number, thermal diffusion number, baro diffusion number, rotational Reynolds number, the product of Prandtl number and Eckert number, magnetic Prandtl number and the ratio of the angular velocities of inner and outer cylinders affects the species separation of rarer and lighter component significantly. The problem discussed here derives its application in the basic fluid dynamics separation processes to separate the rarer component of the different isotopes of heavier molecules where electromagnetic method of separation does not work.     

Viscous dissipation and thermal radiation effects on the magnetohydrodynamic (MHD) flow and heat transfer over a stretching slender cylinder

An axisymmetric magnetohydrodynamic (MHD) boundary layer flow and heat transfer of a fluid over a slender cylinder are investigated numerically. The effects of viscous dissipation, thermal radiation, and surface transverse curvature are taken into account in the simulations. For this purpose, the governing partial differential equations are transformed to ordinary differential equations by using appropriate similarity transformations. The resultant ordinary differential equations along with appropriate boundary conditions are solved by the fourth-order Runge–Kutta method combined with the shooting technique. The effects of various parameters on the velocity and temperature profiles, local skin friction coefficient, and Nusselt number are analyzed.     

Conjugate free convection over a vertical slender hollow cylinder embedded in a porous medium

A numerical study of the steady conjugate free convection over a vertical slender, hollow circular cylinder with the inner surface at a constant temperature and embedded in a porous medium is reported. The governing boundary layer equations for the fluid-saturated porous medium over the cylinder along with the one-dimensional heat conduction equation for the cylinder are cast into dimensionless form, by using a non-similarity transformation. The resulting non-similarity equations with their corresponding boundary conditions are solved by using the Keller box method. Emphasis is placed on the effects caused by the wall conduction parameter, p, and calculations have covered a wide range of this parameter. Heat transfer results including the temperature profiles, the interface temperature profiles and the local Nusselt number are presented. Received on 17 November 1997     

Effect of an Inserted Porous Layer Located at a Wall of a Parallel Plate Channel on Forced Convection Heat Transfer

A theoretical study is performed on heat and fluid flow in partially porous medium filled parallel plate channel. A uniform symmetrical heat flux is imposed onto the boundaries of the channel partially filled with porous medium. The dimensional forms of the governing equations are solved numerically for different permeability and effective thermal conductivity ratios. Then, the governing equations are made dimensionless and solved analytically. The results of two approaches are compared and an excellent agreement is observed, indicating correctness of the both solutions. An overall Nusselt number is defined based on overall thermal conductivity and difference between the average temperature of walls and mean temperature to compare heat transfer in different channels with different porous layer thickness, Darcy number, and thermal conductivity ratio. Moreover, individual Nusselt numbers for upper and lower walls are also defined and obtained. The obtained results show that the maximum overall Nusselt number is achieved for thermal conductivity ratio of 1. At specific values of Darcy number and thermal conductivity ratio, individual Nusselt numbers approach to infinity since the value of wall temperatures approaches to mean temperature.     

Flow of variable thermal conductivity fluid due to inclined stretching cylinder with viscous dissipation and thermal radiation

The aim of the present study is to investigate the flow of the Casson fluid by an inclined stretching cylinder. A heat transfer analysis is carried out in the presence of thermal radiation and viscous dissipation effects. The temperature dependent thermal conductivity of the Casson fluid is considered. The relevant equations are first simplified under usual boundary layer assumptions, and then transformed into ordinary differential equations by suitable transformations. The transformed ordinary differential equations are computed for the series solutions of velocity and temperature. A convergence analysis is shown explicitly. Velocity and temperature fields are discussed for different physical parameters by graphs and numerical values. It is found that the velocity decreases with the increase in the angle of inclination while increases with the increase in the mixed convection parameter. The enhancement in the thermal conductivity and radiation effects corresponds to a higher fluid temperature. It is also found that heat transfer is more pronounced in a cylinder when it is compared with a flat plate. The thermal boundary layer thickness increases with the increase in the Eckert number. The radiation and variable thermal conductivity decreases the heat transfer rate at the surface.     

Viscous and Ohmic heating effects in doubly stratified free convective flow over vertical plate with radiation and chemical reaction

An analysis is carried out to study the combined effects of viscous and Ohmic heating in the transient, free convective flow of a viscous, incompressible, and doubly stratified fluid past an isothermal vertical plate with radiation and chemical reactions. The governing boundary layer equations are solved numerically by an implicit finite difference scheme of the Crank-Nicolson type. The influence of different parameters on the velocity, the temperature, the concentration, the skin friction, the Nusselt number, and the Sherwood number is discussed with graphical illustrations. It is observed that an increase in either the thermal stratification or the mass stratification parameter decreases the velocity. An increase in the thermal stratification increases the concentration and decreases the temperature while an opposite effect is observed for an increase in the mass stratification. An augmentation in viscous and Ohmic heating increases the velocity and temperature while decreases the concentration. The results are found to be in good agreement with the existing solutions in literature.     

Simultaneous heat and mass transfer by natural convection from a plate embedded in a porous medium with thermal dispersion effects

The problem of steady, laminar, simultaneous heat and mass transfer by natural convection flow over a vertical permeable plate embedded in a uniform porous medium in the presence of inertia and thermal dispersion effects is investigated for the case of linear variations of both the wall temperature and concentration with the distance along the plate. Appropriate transformations are employed to transform the governing differential equations to a non-similar form. The transformed equations are solved numerically by an efficient implicit, iterative, finite-difference scheme. The obtained results are checked against previously published work on special cases of the problem and are found to be in good agreement. A parametric study illustrating the influence of the porous medium effects, heat generation or absorption, wall suction or injection, concentration to thermal buoyancy ratio, thermal dispersion parameter, and the Schmidt number on the fluid velocity, temperature and concentration as well as the skin-friction coefficient and the Nusselt and Sherwood numbers is conducted. The results of this parametric study are shown graphically and the physical aspects of the problem are highlighted and discussed.     

Influence of magnetic field and thermal radiation by natural convection past vertical cone subjected to variable surface heat flux

A numerical study is performed to examine the heat transfer characteristics of natural convection past a vertical cone under the combined effects of magnetic field and thermal radiation.The surface of the cone is subjected to a variable surface heat flux.The fluid considered is a gray,absorbing-emitting radiation but a non-scattering medium.With approximate transformations,the boundary layer equations governing the flow are reduced to non-dimensional equations valid in the free convection regime.The dimensionless governing equations are solved by an implicit finite difference method of Crank-Nicolson type which is fast convergent,accurate,and unconditionally stable.Numerical results are obtained and presented for velocity,temperature,local and average wall shear stress,and local and average Nusselt number in air and water.The present results are compared with the previous published work and are found to be in excellent agreement.     

可动边界上热冲击和机械冲击联合作用下圆筒的动态热应力

本文讨论了枪炮内弹道问题中的枪筒瞬态温度场和动态热应力问题.射击过程中弹头在枪筒内前进时,火药燃烧产生的高温和高压作用在弹头后面的圆筒内壁上.本文给出这种状态下圆筒热弹性问题的控制方程组,讨论了相应的泛函,给出有限元法的计算结果.     

Transient numerical simulation of buoyancy driven flow adjacent to an elliptic tube

In this paper the problem of laminar, transient, two-dimensional free convective heat transfer from the surface of a horizontal elliptic tube is considered. The tube, whose surface is suddenly subjected to uniform heat flux, is placed in a quiescent Boussinesq Newtonian fluid with its major axis horizontal. The details of both flow and thermal fields are obtained by solving the full governing Navier–Stokes and energy equations. These equations, expressed in terms of stream function, vorticity and temperature, are numerically solved using an implicit spectral finite difference procedure. The parameters involved are the modified Rayleigh number, Prandtl number and axis-ratio. The investigation covers a Rayleigh number range up to 10⁷. The minor–major axis ratio of elliptic cylinder ranges between 0.05 and 0.998 and Prandtl number ranges between 0.1 and 10. The effects of these parameters on the surface temperature distribution and heat transfer coefficients are determined and the different aspects of the results are discussed for some selected cases.     

Effect of rotation in magneto-thermoelastic transversely isotropic hollow cylinder with three-phase-lag model

This article deals with the various heat source responses in a transversely isotropic hollow cylinder under the purview of three-phase-lag (TPL) generalized thermoelasticity theory. In presence of magnetic field and due to the rotating behavior of the cylinder, the governing equations are redefined for generalized thermoelasticity with thermal time delay. In order to obtain the stress, displacement and temperature field, the field functions are expressed in terms of modified Bessel functions in Laplace transformed domain. When the outer radius of hollow cylinder tends to infinity, the corresponding results are discussed. Finally an appropriate Laplace transform inversion technique is adopted.     

Hydromagnetic simultaneous heat and mass transfer by mixed convection from a vertical plate embedded in a stratified porous medium with thermal dispersion effects

The problem of steady, laminar, hydromagnetic simultaneous heat and mass transfer by mixed convection flow over a vertical plate embedded in a uniform porous medium with a stratified free stream and taking into account the presence of thermal dispersion is investigated for the case of power-law variations of both the wall temperature and concentration. Certain transformations are employed to transform the governing differential equations to a local similarity form. The transformed equations are solved numerically by an efficient implicit, iterative, finite-difference scheme. The obtained results are checked against previously published work on special cases of the problem and are found to be in excellent agreement. A parametric study illustrating the influence of the magnetic field, porous medium inertia effects, heat generation or absorption, lateral wall mass flux, concentration to thermal buoyancy ratio, and the Lewis number on the fluid velocity, temperature and concentration as well as the Nusselt and the Sherwood numbers is conducted. The results of this parametric study is shown graphically and the physical aspects of the problem are discussed. Received on 17 November 1998     

Unsteady natural convective flow past a moving vertical cylinder with heat and mass transfer

Transient natural convection boundary layer flow of an incompressible viscous fluid past an impulsively moving semi- infinite vertical cylinder is considered. The temperature and concentration of the cylinder surface are taken to be uniform. The unsteady, nonlinear and coupled governing equations of the flow are solved using an implicit finite difference scheme. The finite difference scheme is unconditionally stable and accurate. Numerical results are presented with various sets of parameters for both air and water. Transient effects of velocity, temperature and concentration profiles are analyzed. Local and average skin friction, rates of heat and mass transfer are shown graphically. Received on 1 November 1999     

Unsteady MHD natural convection from a heated vertical porous plate in a micropolar fluid with Joule heating,chemical reaction and radiation effects

The effects of Joule-heating, chemical reaction and thermal radiation on unsteady MHD natural convection from a heated vertical porous plate in a micropolar fluid are analyzed. The partial differential equations governing the flow and heat and mass transfer have been solved numerically using an implicit finite-difference scheme. The case corresponding to vanishing of the anti-symmetric part of the stress tensor that represents weak concentrations is considered. The numerical results are validated by favorable comparisons with previously published results. A parametric study of the governing parameters, namely the magnetic field parameter, suction/injection parameter, radiation parameter, chemical reaction parameter, vortex viscosity parameter and the Eckert number on the linear velocity, angular velocity, temperature and the concentration profiles as well as the skin friction coefficient, wall couple stress coefficient, Nusselt number and the Sherwood number is conducted. A selected set of numerical results is presented graphically and discussed.