Magnetostructural phase separation and giant isotope effect in R<Subscript>0.5</Subscript>Sr<Subscript>0.5</Subscript>MnO<Subscript>3</Subscript>

Results of neutron diffraction studies of R_0.5Sr_0.5MnO₃ manganites (R = Sm, Nd_0.772Tb_0.228, and Nd_0.544Tb_0.456) performed to reveal the microscopic origins of the giant oxygen isotope effect recently discovered in Sm_0.5Sr_0.5MnO₃ are presented. It is shown that two crystalline phases differing in the type of Jahn-Teller distortions of oxygen octahedra and in the type of magnetic ordering coexist at low temperatures in all the studied compositions. A scenario for the observed phase transitions is suggested based on the diffraction data. It is found that the percolation transition from the metallic to insulating state in compositions with Sm upon substitution of ¹⁸O for ¹⁶O is associated with a sharp (from 65 to 13%) decrease in the volume of the ferromagnetic metallic phase.     

The nature of magnetoelastic anomalies in Nd<Subscript>0.5</Subscript>Sr<Subscript>0.5</Subscript>MnO<Subscript>3</Subscript> upon suppression of charge ordering by a magnetic field

This paper reports on the results of investigations into the magnetic and magnetoelastic properties of Nd_0.5Sr_0.5MnO₃ single crystals in pulsed magnetic fields up to 250 kOe, the magnetic and kinetic properties of these crystals in weak static magnetic fields, and their thermal expansion. It is demonstrated that the studied properties exhibit a number of anomalies due to a transition from the antiferromagnetic semiconducting state to the ferromagnetic metallic state upon suppression of charge ordering.     

Insertion properties of LiFe<Subscript>0.5</Subscript>Mn<Subscript>0.5</Subscript>PO<Subscript>4</Subscript> electrode materials for Li-ion batteries

This paper addresses the synthesis structural and electrochemical properties of LiFe_0.5Mn_0.5PO₄ electrode materials for Li-ion batteries. The charge–discharge reaction of Li/LiPF₆-EC–DEC/LiFe_0.5Mn_0.5PO₄ cell carried out at the 1-C rate shows a capacity retention of 128 mAh/g. The local structure of the delithiated Li _x Fe_0.5Mn_0.5PO₄ phases have been studied by Fourier transform infrared spectroscopy and magnetometry. Spectral features indicate that the structure of the delithiated phase remains in the orthorhombic system. The compositional dependence of the magnetic moment is found to be in quantitative agreement with the theoretical value predicted for oxidation of M ²⁺ ions in the high spin state. Paper presented at the 11th Euro-Conference on Science and Technology of Ionics, Batz-sur-Mer, France, 9–15 Sept. 2007     

Optical properties of Cd<Subscript>0.6</Subscript>Mn<Subscript>0.4</Subscript>Te/Cd<Subscript>0.5</Subscript>Mg<Subscript>0.5</Subscript>Te quantum-well structures

Emission spectra of three Cd_0.6Mn_0.4Te/Cd_0.5Mg_0.5Te superlattices with Cd_0.6Mn_0.4Te quantum-well (QW) widths of 7, 13, and 26 monolayers, respectively, and the same thickness (46 monolayers) of the Cd_0.5Mg_0.5Te barriers have been studied. The QW width affects the shape and spectral position of the Mn²⁺ intracenter luminescence (IL) band as a result of the crystal field being dependent on the position of the manganese ion with respect to the interface. Measured in identical experimental conditions, the exciton luminescence as compared to the IL is substantially higher in intensity in a QW than in a bulk CdMnTe crystal. Some samples of superlattices and bulk crystals exhibit, in addition to the conventional IL band near 2.0 eV, a weaker band at about 1.45 eV. This band apparently derives from intracenter transitions in the Mn²⁺ ions in the regions where the crystal lattice has the rock-salt rather than the conventional zinc blende structure.     

Short-Range Order in Amorphous and Crystalline Ferroelectric Hf<Subscript>0.5</Subscript>Zr<Subscript>0.5</Subscript>O<Subscript>2</Subscript>

The microstructures of amorphous and polycrystalline ferroelectric Hf_0.5Zr_0.5O₂ films are studied by X-ray spectroscopy and ellipsometry. EXAFS spectra demonstrate that the amorphous film consists of an “incompletely mixed” solid solution of metallic oxides HfO₂ and ZrO₂. After rapid thermal annealing, the mixed Hf_0.5Zr_0.5O₂ oxide films have a more ordered polycrystalline structure, and individual Hf and Zr monoxide islands are formed in the films. These islands are several nanometers in size and have a structure that is similar to the monoclinic structure of HfO₂ and ZrO₂. The presence of the HfO₂ and ZrO₂ phases in the Hf_0.5Zr_0.5O₂ films is also detected by ellipsometry.     

Electronic Structure of Oxygen Vacancies in the Orthorhombic Noncentrosymmetric Phase Hf<Subscript>0.5</Subscript>Zr<Subscript>0.5</Subscript>O<Subscript>2</Subscript>

The electronic structure of stoichiometric and oxygen-depleted Hf_0.5Zr_0.5O₂ in the orthorhombic noncentrosymmetric phase has been studied by X-ray photoelectron spectroscopy and quantum-chemical simulation based on the density functional theory. It has been established that the ion-etching-induced peak in the photoelectron emission spectrum with the energy above the top of the o-Hf_0.5Zr_0.5O₂ valence band is due to oxygen vacancies. A method of estimating the density of oxygen vacancies from the comparison of the experimental and theoretical photoelectron spectra of the valence band has been proposed. It has been established that oxygen polyvacancies in o-Hf_0.5Zr_0.5O₂ are not formed: the energetically favorable spatial arrangement of oxygen vacancies in a crystal corresponds to noninteracting oxygen vacancies distant from each other.     

Properties of the ferroelectric ceramics PbSc<Subscript>0.5</Subscript>Ta<Subscript>0.5</Subscript>O<Subscript>3</Subscript> fabricated from an ultradispersed powder

The relaxor ceramics PbSc_0.5Ta_0.5O₃ produced from an ultradispersed powder is studied by X-ray diffraction and dielectric measurements. Before sintering, the powder was subjected to treatment in Bridgman anvils in combination with shear deformation. This method is shown to affect the order parameter and dielectric properties of the ceramics without using long-term high-temperature annealing.     

Magnetic and Magnetodielectric Properties of Ho<Subscript>0.5</Subscript>Nd<Subscript>0.5</Subscript>Fe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript>

The magnetic and magnetodielectric properties of Ho_0.5Nd_0.5Fe₃(BO₃)₄ ferroborate with the competing Ho–Fe and Nd–Fe exchange couplings have been experimentally and theoretically investigated. Step anomalies in the magnetization curves at the spin-reorientation transition induced by the magnetic field B ║ c have been found. The spontaneous spin-reorientation transition temperature T_SR ≈ 8 K has been refined. The measured magnetic properties and observed features are interpreted using a single theoretical approach based on the molecular field approximation and calculations within the crystal field model of the rare-earth ion. Interpretation of the experimental data includes determination of the crystal field parameters for Ho³⁺ and Nd³⁺ ions in Ho_0.5Nd_0.5Fe₃(BO₃)₄ and parameters of the Ho–Fe and Nd–Fe exchange couplings.     

Microemulsion-mediated in-situ synthesis and magnetic characterization of polyaniline/Zn<Subscript>0.5</Subscript>Cu<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanocomposite

Polyaniline/Zn_0.5Cu_0.5Fe₂O₄ nanocomposite was synthesized by a simple, general and inexpensive in-situ polymerization method in w/o microemulsion. The effects of polyaniline coating on the magnetic properties of Zn_0.5Cu_0.5Fe₂O₄ nanoparticles were investigated. The structural, morphological and magnetic properties of as-prepared samples were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectra, scanning electron microscopy (SEM) and magnetic measurements. The morphology analysis confirmed that polyaniline was deposited on the porous surface of magnetic Zn_0.5Cu_0.5Fe₂O₄. It was shown that the saturation magnetization and coercivity of Zn_0.5Cu_0.5Fe₂O₄ decreased after polyaniline coating, which can be interpreted by the interparticle dipole–dipole interactions that contributed to magnetic anisotropy and changed the magnetic properties of the nanoparticles. PACS  74.25.Ha; 81.05.-t; 81.05.Lg     

Oxygen isotope effect in chromium-doped Pr<Subscript>0.5</Subscript>Ca<Subscript>0.5</Subscript>MnO<Subscript>3</Subscript> manganites

The effect of oxygen isotope substitution on the properties of Pr_0.5Ca_0.5Mn_{1 ? x} Cr _x O₃ manganites (x = 0, 0.02, 0.05) have been studied. The introduction of chromium favors (i) the decomposition of a charge-ordered state and (ii) the appearance of a ferromagnetic metallic phase in Pr_0.5Ca_0.5Mn_{1 ? x} Cr _x ^16–18O₃. The isotope substitution ¹⁶O → ¹⁸O leads to a decrease in the content of the ferromagnetic phase, an increase in the charge-ordering transition temperature (T _CO), and a decrease in the ferromagnetic transition temperature (T _FM). The isotope mass exponent is evaluated.     

Anomalous increase of the thermopower and thermoelectric figure of merit in Ga-doped <Emphasis Type="Italic">p</Emphasis>-(Bi<Subscript>0.5</Subscript>Sb<Subscript>0.5</Subscript>)<Subscript>2</Subscript>Te<Subscript>3</Subscript> single crystals

The effect of Ga doping on the temperature dependences (5 K ≤ T ≤ 300 K) of the Seebeck coefficient α, electrical conductivity σ, thermal conductivity coefficient κ, and thermoelectric figure of merit Z of p-(Bi_0.5Sb_0.5)₂Te₃ single crystals has been investigated. It has been shown that, upon Ga doping, the hole concentration decreases, the Seebeck coefficient increases, the electrical conductivity decreases, and the thermoelectric figure of merit increases. The observed variations in the Seebeck coefficient cannot be completely explained by the decrease in the hole concentration and indicate a noticeable variation in the density of states due to the Ga doping.     

Magnetic and magnetoelastic properties of the TbMnSi and Tb<Subscript>0.5</Subscript>La<Subscript>0.5</Subscript>MnSi compounds

X-ray diffraction studies showed substitution of nonmagnetic lanthanum for terbium in the TbMnSi polycrystalline compound to initiate a structural transition from a TiNiSi-type orthorhombic structure (for TbMnSi) to a CeFeSi-type tetragonal phase (for Tb_0.5La_0.5MnSi). Magnetic measurements (of the magnetization, magnetostriction, thermal expansion) performed on Tb_0.5La_0.5MnSi revealed a change in the character of magnetic ordering, the appearance of a ferromagnetic component in the Mn magnetic moment, a strong increase in magnetization as compared to TbMnSi, and the appearance of a spontaneous magnetic moment. Insertion of the lanthanum ion onto the rare-earth sublattice of TbMnSi brings about a change in the unit cell size and, hence, in the Mn-Mn, Mn-Si, and R-Mn interatomic distances, which causes, in turn, a change in the character of exchange interactions in Tb_0.5La_0.5MnSi and the formation of a complex magnetic structure.     

Magnetic properties of the Nd<Subscript>0.5</Subscript>Gd<Subscript>0.5</Subscript>Fe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript> single crystal

The magnetic properties of the Nd_0.5Gd_0.5Fe₃(BO₃)₄ single crystal have been studied in principal crystallographic directions in magnetic fields to 90 kG in the temperature range 2–300 K; in addition, the heat capacity has been measured in the range 2–300 K. It has been found that, below the Néel temperature T _N = 32 K down to 2 K, the single crystal exhibits an easy-plane antiferromagnetic structure. A hysteresis has been detected during magnetization of the crystal in the easy plane in fields of 1.0–3.5 kG, and a singularity has been found in the temperature dependence of the magnetic susceptibility in the easy plane at a temperature of 11 K in fields B < 1 kG. It has been shown that the singularity is due to appearance of the hysteresis. The origin of the magnetic properties of the crystal near the hysteresis has been discussed.     

Multifrequency electron spin resonance study of the charge-ordered manganite Nd<Subscript>0.5</Subscript>Ca<Subscript>0.5</Subscript>MnO<Subscript>3</Subscript>

We performed multifrequency electron spin resonance (ESR) on the antiferromagnetic (T_N = 160 K) and charge-ordered (T _co = 250 K) insulating manganite Nd_0.5Ca_0.5MnO₃. Temperature (4–300 K) and frequency (9.4–285 GHz) dependence of the linewidth, intensity and position of the ESR line were studied. In the paramagnetic state we observe a single Lorentzian absorption line. For a given frequency, the ESR line position is temperature independent (close tog = 1.99). A strong linewidth broadening is observed below T_co. This indicates that there is no magnetic order in the temperature rangeT _cos>T >T _N but strong antiferromagnetic fluctuations are present. Below T_N, due to high-frequency and high-field ESR (up to 12 T) measurements, we were able to observe unexpected lines within the antiferromagnetic gap revealing the presence of a phase separation.     

Investigation of Cu<Subscript>0.5</Subscript>Ni<Subscript>0.5</Subscript>/Nb interface transparency by using current-perpendicular-to-plane measurement

A direct determination of the interfacial transparency on the basis of current-perpendicular-to-plane (CPP) resistances for Cu_0.5Ni_0.5/Nb layered system is presented. This particular realization has substantial significance for understanding the interfacial transport in such heterostructures. The unexpected large critical thickness for this weak ferromagnetic containing system can be attributed to the strong pair-breaking effect as a result of the high interfacial transparency. Besides, the strong pair-breaking also plays a decisive role in the occurrence of the dimensionality crossover of the temperature dependent upper critical magnetic field.     

Effect of carbon coating process on the structure and electrochemical performance of LiNi<Subscript>0.5</Subscript>Mn<Subscript>0.5</Subscript>O<Subscript>2</Subscript> used as cathode in Li-ion batteries

LiNi_0.5Mn_0.5O₂ powder was synthesized by a coprecipitation method. LiOH.H₂O and coprecipitated [(Ni_0.5Mn_0.5)C₂O₄] precursors were mixed carefully together and then calcined at 900°C. Surface modified cathode materials were obtained by coating LiNi_0.5Mn_0.5O₂ with a thin layer of amorphous carbon using table sugar and starch as carbon source. Both parent and carbon-coated samples have the characteristic layered structure of LiNi_0.5Mn_0.5O₂ as estimated from X-ray diffractometry measurements. Transmission electron microscope showed the presence of C layer around the prepared particles. TGA analysis emphasized and confirmed the presence of C coating around LiNi_0.5Mn_0.5O₂. It is obvious that the carbon coating appears to be beneficial for the electrochemical performance of the LiNi_0.5Mn_0.5O₂. A capacity of about 150 mAh/g is delivered in the voltage range 2.5–4.5 V at current density C/15 for carbon coated LiNi_0.5Mn_0.5O₂ in comparison with about 165 mAh/g obtained for carbon free LiNi_0.5Mn_0.5O₂ at the same current density and voltage window. About 92% and 82% capacity retention was obtained at 50th cycle for coated LiNi_0.5Mn_0.5O₂ using sucrose and starch, respectively; whereas, 75% was retained after only 30th cycle for carbon free LiNi_0.5Mn_0.5O₂. This improvement is mainly attributed to the presence of thin layer of carbon layer that encapsulate the nanoparticles and improve the conductivity and the electrochemical performance of LiNi_0.5Mn_0.5O₂.     

Electrical properties of a lead-free perovskite ceramic: (Na<Subscript>0.5</Subscript>Sb<Subscript>0.5</Subscript>)TiO<Subscript>3</Subscript>

Polycrystalline (Na_0.5Sb_0.5)TiO₃ was prepared using a high-temperature solid-state reaction method. An XRD analysis indicated the formation of a single-phase monoclinic structure. Complex impedance studies revealed the presence of grain boundary effects from 300 °C onwards. Also, the dielectric relaxation in the system was found to be of a non-Debye type. The ac conductivity data were used to evaluate the density of states at the Fermi level, the minimum hopping length and activation energy of the compound. The dc electrical and thermal conductivities of grain and grain boundary have been assessed. The correlated barrier hopping model was found to successfully explain the mechanism of charge transport in (Na_0.5Sb_0.5)TiO₃. PACS 72.20.Ee; 77.22.Ch; 77.22.Gm; 77.84.Dy; 81.05.Je     

Conduction through localized states in a single crystal of the TlGa<Subscript>0.5</Subscript>Fe<Subscript>0.5</Subscript>Se<Subscript>2</Subscript> alloy

Layered single crystals of the TlGa_0.5Fe_0.5Se₂ alloy in a dc electric field at temperatures ranging from 128 to 178 K are found to possess variable-range-hopping conduction along natural crystal layers through states localized in the vicinity of the Fermi level. The parameters characterizing the electrical conduction in the TlGa_0.5Fe_0.5Se₂ crystals are estimated as follows: the density of states near the Fermi level N_F = 2.8 × 10¹⁷ eV^?1 cm^?3, the spread in energy of these states ΔE = 0.13 eV, the average hopping length R_av = 233 Å, and the concentration of deep-lying traps N _t = 3.6 × 10¹⁶ cm^?3.     

Phase separation effects in charge-ordered Pr<Subscript>0.5</Subscript>Ca<Subscript>0.5</Subscript>MnO<Subscript>3</Subscript> thin film

Compressed Pr_0.5Ca_0.5MnO₃ films (250 nm) deposited on LaAlO₃ have been studied by Electron Spin Resonance technique under high frequency and high magnetic field. We show evidences for the presence of a ferromagnetic phase (FM) embedded in the charge-order phase (CO), in form of thin layers which size depends on the strength and orientation of the magnetic field (parallel or perpendicular to the substrate plane). This FM phase presents an easy plane magnetic anisotropy with an anisotropy constant 100 times bigger than typical bulk values. When the magnetic field is applied perpendicular to the substrate plane, the FM phase is strongly coupled to the CO phase whereas for the parallel orientation it keeps an independent ferromagnetic resonance even when the CO phase becomes antiferromagnetic.     

Synthesis and lithium-ion storage performances of LiFe<Subscript>0.5</Subscript>Co<Subscript>0.5</Subscript>PO<Subscript>4</Subscript>/C nanoplatelets and nanorods

Carbon-coated olivine-structured LiFe_0.5Co_0.5PO₄ solid solution was synthesized by a facile rheological phase method and applied as cathode materials of lithium-ion batteries. The nanostructure’s properties, such as morphology, component, and crystal structure for the samples, characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer, Emmett, and Teller (BET) determination, X-ray photoelectron spectroscopy (XPS), and the electrochemical performances were evaluated using constant current charge/discharge tests and electrochemical impedance spectroscopy (EIS). The results indicate that nanoplatelet- and nanorod-structured LiFe_0.5Co_0.5PO₄/C composites were separately obtained using stearic acid or polyethylene glycol 400 (PEG400) as carbon source, and the surfaces of particles for the two samples are ideally covered by full and uniform carbon layer, which is beneficial to improving the electrochemical behaviors. Electrochemical tests verify that the nanoplatelet LiFe_0.5Co_0.5PO₄/C shows a better capacity capability, delivering a discharge specific capacity of 133.8, 112.1, 98.3, and 74.4 mAh g^?1 at 0.1, 0.5, 1, and 5 C rate (1 C?=?150 mA g^?1); the corresponding cycle number is 5th, 11th, 15th, 20th, and 30th, respectively, whereas the nanorod one possesses more excellent cycling ability, with a discharge capacity of 83.3 mAh g^?1 and capacity retention of 86.9% still maintained after cycling for 100 cycles at 0.5 C. Results from the present study demonstrate that the LiFe_0.5Co_0.5PO₄ solid solution nanomaterials with favorable carbon coating effect combine the characteristics and advantage of LiFePO₄ and LiCoPO₄, thus displaying a tremendous potential as cathode of lithium-ion battery.