Electro-oxidation and determination of trazodone at multi-walled carbon nanotube-modified glassy carbon electrode

A simple and rapid electrochemical method was developed for the determination of trace-level trazodone, based on the excellent properties of multi-walled carbon nanotubes (MWCNTs). The MWCNT-modified glassy carbon electrode was constructed and the electrochemical behavior of trazodone was investigated in detail. The cyclic voltammetric results indicate that MWCNT-modified glassy carbon electrode can remarkably enhance electrocatalytic activity towards the oxidation of trazodone in neutral solutions. It leads to a considerable improvement of the anodic peak current for trazodone, and allows the development of a highly sensitive voltammetric sensor for the determination of trazodone. Trazodone could effectively accumulate at this electrode and produce two anodic peaks at about 0.73 V and 1.00 V. The electrocatalytic behavior was further exploited as a sensitive detection scheme for the trazodone determination by differential-pulse voltammetry. Under optimized conditions, the concentration range and detection limit are 0.2-10 μM and 24 nM, respectively for trazodone. The proposed method was successfully applied to trazodone determination in pharmaceutical samples. The analytical performance of this sensor has been evaluated for detection of analyte in urine as a real sample.     

Voltammetric determination of disinfectants at multiwalled carbon nanotube modified glassy carbon electrode

The voltammetric method for simultaneous determination of some disinfectants at glassy carbon electrode modified with multiwalled carbon nanotubes is presented. The examined compounds are: 2-phenylphenol, 4-chloro-3-methylphenol, triclosan (5-chloro-2-(2,4-dichlorophenoxy)phenol and 2-mercaptobenzothiazole. The measurements has been performed using cyclic voltammetry and differential pulse voltammetry in Britton-Robinson buffers as supporting electrolytes. The modification of electrode surface with multiwalled carbon nanotubes enhances the peak current. It is possible to measure mixtures of two compounds (2-phenylphenol and 2-mercaptobenzothiazole, 4-chloro-3-methylphenol and 2-mercaptobenzothiazole, triclosan and 2-mercaptobenzothiazole) in the solution of pH 9.9, which provides the best separation of oxidation peaks.     

The electrochemical behavior of dopamine at glassy carbon electrode modified by Nafion multiwalled carbon nanotubes

DFT (B3LY/6-31G (d, p) and B3LYP/cc-PVDZ) calculations are performed for deoxidized dopamine (DA_(R)) and its oxidized form (DA_(O)). The electrochemistry of dopamine (DA) was studied by cyclic voltammetry (CV) at a glassy carbon electrode modified by Nafion multiwalled carbon nanotubes (MWNTs) in phosphate buffers at pH 5.4, showing that the standard electrode potential of a half reaction for DA_(O), H⁺/DA_(R) is 0.74 V. This experimental standard electrode potential of the half reaction is consistent with those of 0.65 and 0.69 V calculated using the energies of solvation and the sum of the electronic and thermal free energies of DA_(R) and DA_(O). The frontier orbital theory and Mulliken charges of molecules explain the electrochemical behavior of CV at a modified electrode well. The effects of oxygen on DA_(R) in blood and drug are also discussed according to equilibrium theory. The modified electrode was successful for determination of the content of pharmaceutical DA. The text was submitted by the authors in English.     

吲哚美辛在单壁碳纳米管修饰电极上的电化学行为

运用伏安法研究了吲哚美辛在单壁碳纳米管修饰电极上的电化学行为.在0.1 mol/L HAc-NaAc缓冲溶液(pH 4.5)中,吲哚美辛于0.91 V (vs.SCE)电位处有一个峰形很好的氧化峰.与裸玻碳电极相比,吲哚美辛在修饰电极上的电位正移了约30 mV,峰电流增加了近10倍,表明该修饰电极对吲哚美辛有较强的电催化作用.搅拌条件下开路富集2 min,氧化峰电流与吲哚美辛在5.5×10-7～1.1×10-5 mol/L浓度范围内呈良好的线性关系,检出限为1.1×10-7 mol/L.该方法可用于药剂中吲哚美辛的分析.     

吡硫醇在单壁碳纳米管修饰电极上电化学行为的研究

研究了吡硫醇在单壁碳纳米管修饰电极上的电化学行为,提出了一种检测吡硫醇的电化学方法.在0.1 mol/L的NaAc-HAc(pH 4.0)缓冲溶液中,吡硫醇在单壁碳纳米管修饰电极上出现一灵敏的氧化峰,峰电位位于0094 V处.与裸玻碳电极相比,单壁碳纳米管修饰电极显著提高了吡硫醇的氧化峰电流.在最佳实验条件下,吡硫醇浓度在9.9×10~(-6)～5.7×10~(-4) mol/L范围内与峰电流呈良好的线性关系,检出限为2.98×10~(-7) mol/L.吡硫醇在单壁碳纳米管修饰电极上的氧化过程受吸附控制,为1电子2质子的过程.     

对硝基苯酚在多壁碳纳米管修饰玻碳电极上的电化学行为及分析测定

水中对硝基苯酚主要来源于化工、制药行业,它有致癌作用。人们已对它的测定方法进行了大量的研究,最早采用的测定方法是分光光度法,其检测限偏高;色谱法测定对硝基苯酚,操作繁琐,仪器昂贵,分析成本高。后来又发展了一种操作更方便的直接用于测定的电化学方法。本文旨在利用碳纳米管对对硝基苯酚的吸附性能,研究对硝基苯酚在多壁碳纳米管修饰电极上的电化学行为。     

Electrochemical behavior of o-sec-butylphenol at glassy carbon electrode modified with multiwalled carbon nanotubes and 1-butyl-3-methylimidazolium hexafluorophosphate

A sensitive electrochemical sensor based on immobilized multiwalled carbon nanotubes (MWCNTs) and 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM·PF(6)) on a glassy carbon electrode (GCE) for o-sec-butylphenol (osBP) was proposed. The electro-oxidation behavior was studied, the experimental conditions were optimized and kinetic parameters were calculated. The results indicated that this electrochemical sensor has the advantages of fast electron-transfer rate, minimal fouling of electrodes, high sensitivity and stability for o-sec-butylphenol. Upon comparison with a glassy carbon electrode, this senor would effectively minimize the over-potential and increase the electrochemical response to o-sec-butylphenol. Under the optimum conditions, the peak current was linear to the osBP concentration range from 1 × 10(-7) to 2.5 × 10(-5) M with the detection limit of 8.65 × 10(-9) M (S/N = 3). The proposed method was applied to the determination of spiked water samples with satisfactory results.     

没食子酸在电活化玻碳电极上的电化学行为及测定

采用循环伏安法和线性扫描伏安法对没食子酸在电活化玻碳电极上的电化学行为进行了研究。玻碳电极在pH7.0的磷酸盐缓冲溶液中,用恒电位法在1.7 V电位阳极氧化400 s。然后在pH3.0的柠檬酸盐缓冲溶液中,没食子酸在0.479 V和0.442 V处有一良好的氧化还原峰,在0.02～0.40 V s-1范围内,其氧化峰电流与扫描速率呈良好线性关系,表明电极过程为受吸附控制的准可逆过程。线性循环伏安法的氧化峰电流与没食子酸浓度1×10-6～1×10-4mol L-1范围内呈良好的线性关系(r=0.980 6),检出限为7.6×10-7mol L-1(S/N=3)。该方法操作简便,重现性较好,并应用此法分析了健民咽喉片剂中的没食子酸的含量。     

Voltammetric behavior and determination of 17 beta-estradiol at multi-wall carbon nanotube-Nafion modified glassy carbon electrode.

For the purpose of low cost and sensitive electrochemical detection of 17 beta-estradiol (E2), a multi-wall carbon nanotube (MWNT)-Nafion modified electrode was fabricated. The MWNT modified electrode shows enhancement for the anodic peak current of E2 compared with the value obtained using a bare electrode. The anodic peak current measured by square wave voltammetry after 5 min open-circuit accumulation was proportional to the concentration of E2 over the range of 2.5 x 10(-7) to 10 10(-6) M, and a detection limit of 1 x 10(-8) M was obtained.     

Voltammetric determination of cefpirome at multiwalled carbon nanotube modified glassy carbon sensor based electrode in bulk form and pharmaceutical formulation

A new, simple and low cost voltammetric method for the determination of cefpirome in pharmaceutical preparations has been developed using multiwalled carbon nanotube modified glassy carbon electrode (MWCNT), which showed stable response with enhanced selectivity and sensitivity over the bare glassy carbon electrode. A multiwalled carbon nanotube (MWCNT) modified glassy carbon electrode (GCE) is used for the simultaneous determination of cefpirome by differential pulse voltammetry and square wave voltammetry. Results indicated that cathodic peak of cefpirome is greatly improved at MWCNT modified GC electrode as compared with the bare GC electrode showing excellent electrocatalytic activity towards cefpirome reduction. Linear calibration curves are obtained over the concentration range 100-600 μg mL(-1) in Britton Robinson buffer at pH 4.51 with limit of detection (LOD) and limit of quantification (LOQ) are 0.647 μg mL(-1) and 2.159 μg mL(-1) using SWV and 5.540 μg mL(-1) and 18.489 μg mL(-1) using DPV, respectively. The described method is rapid and can be successfully applied for the determination of cefpirome in bulk form and pharmaceutical formulations.     

Electrodeposition of zinc oxide nanoparticles on multiwalled carbon nanotube-modified electrode for determination of caffeine in wastewater effluent

We report on the development of an electrochemical sensor based on electrodepositing zinc oxide on multiwalled carbon nanotube-modified glassy carbon electrode for the detection of caffeine in pharmaceutical wastewater effluents. The measurements were carried out using cyclic voltammetry, electrochemical impedance spectroscopy, chronoamperometry and differential pulse voltammetry (DPV). DPV measurements showed a linear relationship between oxidation peak current and concentration of caffeine in 0.1 M HClO₄ (pH 1.0) over the concentration range 0.00388–4.85 mg/L and a detection limit of 0.00194 mg/L. The diffusion coefficient and Langmuir adsorption constant for caffeine were calculated to be 3.25 × 10^?6 cm² s^?1 and 1.10 × 10³ M^?1, respectively. The sensor showed satisfactory results when applied to the detection of caffeine in wastewater effluents.     

Voltammetric determination of niclosamide at a glassy carbon electrode

A very sensitive and selective procedure was developed for the determination of niclosamide based on square-wave voltammetry at a glassy carbon electrode. Cyclic voltammetry was used to investigate the electrochemical reduction of niclosamide at a glassy carbon electrode. Niclosamide was first irreversibly reduced from NO2 to NHOH at -0.659 V in aqueous buffer solution of pH 8.5. Reversible and well defined peaks at -0.164 V and -0.195 V (vs. Ag/AgCl) were obtained that are responsible for two electron peaks between NHOH and NO. Following optimisation of the voltammetric parameters, pH and reproducibility, a linear calibration curve over the range 5 x 10(-8)-1 x 10(-6) mol dm(-3) was achieved. The detection limit was found to be 2.05 x 10(-8) mol dm(-3) niclosamide. For eight successive determinations of 5 x 10(-7) mol dm(-3) niclosamide, a relative standard deviation of 2.4% was obtained. This voltammetric method was applied to the direct determination of niclosamide in tablets. The results of the analysis suggest that the proposed method has promise for the routine determination of niclosamide in the products examined.     

Anodic behavior of clioquinol at a glassy carbon electrode

Clioquinol is an antifungal, antiprotozoal and an Alzheimer's disease drug with cytotoxic activity toward human cancer cells. The electrochemical behavior of clioquinol and its oxidation product was studied using cyclic, differential pulse and square-wave voltammetry over a wide pH range on a glassy carbon electrode. The results revealed that the oxidation of clioquinol is an irreversible pH-dependent process that proceeds with the transfer of one electron and one proton in an adsorption-controlled mechanism and results in the formation of a main oxidation product, which adsorbs very strongly on the glassy carbon surface. The charge transfer coefficient was calculated as 0.64. The adsorbed oxidation product presented reversible redox behavior, with two electron and two proton transfer. The electrochemical oxidation of clioquinol as a phenolic compound involves the formation of a phenoxy radical which reacts in at least two ways: in one pathway the radical initiates polymerization, the products remaining at the electrode surface, and in the other the radical is oxidized to a quinone-like structure. A mechanism for the oxidation of clioquinol is proposed.     

芦丁在纳米金修饰玻碳电极上的电化学行为及其测定

采用循环伏安法将纳米金电沉积于玻碳电极表面,制备了纳米金修饰玻碳电极(NG/GCE).在pH3.29的Britton-Robinson(B-R)缓冲溶液中,用循环伏安法研究了芦丁在NG/GCE上的电化学行为.结果表明,NG/GCE对芦丁的氧化还原反应有良好的电催化作用.用方波伏安法测得芦丁的还原峰电流与其浓度在2.0×10-8～2.0×10-6mol/L范围内呈线性关系,检出限为1.0×10-8mol/L(S/N=3).     

聚精氨酸修饰玻碳电极上多巴胺的电化学特性及其检测

用循环伏安法制备了聚精氨酸修饰玻碳电极,研究了神经递质多巴胺在该聚合物薄膜修饰电极上的电化学行为及其检测。在pH7.0的磷酸盐缓冲溶液中,多巴胺在聚精氨酸修饰电极上于0.19V和0.16V处出现一对灵敏、可逆的氧化还原峰。在最佳测试条件下,氧化峰电流与多巴胺的浓度在3.0×10-7~8.0×10-4mol/L范围内呈良好的线性关系,线性回归方程为Ipa(μA)=86.063C(mmol/L) 20.183,相关系数r=0.9993,最低检测限(3σ)5.0×10-8mol/L。用于多巴胺针剂含量的测定,结果满意。     

Sensitive and selective determination of hydrazine using glassy carbon electrode modified with Pd nanoparticles decorated multiwalled carbon nanotubes

A glassy carbon electrode modified with palladium nanoparticles decorated multiwalled carbon nanotubes (GCE/nanoPd-MWCNTs) was fabricated. Incorporation of palladium nanoparticles onto the carbon nantube surface by thermal decomposition of palladium acetate led to the fabrication of a sensor with a significant decrease in hydrazine electrooxidation potential. The sensor exhibited low detection limits, high sensitivity and selectivity, rapid response, and good stability toward hydrazine detection.     

Direct electrochemical conversion of bilirubin oxidase at carbon nanotube-modified glassy carbon electrodes

We report on direct electron transfer reactions of bilirubin oxidase at multi-walled carbon nanotube (MWCNT) modified glassy carbon electrodes (GCE). The bioelectrocatalytic oxygen reduction was recorded using linear sweep voltammetry (LSV) with BOD in solution, adsorbed and covalently linked to the nanotubes. The MWCNT modification of GC electrodes strongly enhances the oxygen reduction compared to the signals at unmodified GCE. Under anaerobic conditions with a high protein concentration in solution a pair of redox peaks with a formal potential of 450 ± 15 mV vs Ag/AgCl, 1 M KCl (pH 7.4) was found with cyclic voltammetry. The redox conversion is indicated to be surface-controlled and pH-dependent (54.5 mV/pH). The quasi-reversible redox reaction might be attributed to the trinuclear T2/T3 cluster of BOD.     

黄芩甙在玻碳电极上的电化学行为及其应用

用线性扫描伏安法(LSV)、循环伏安法(CV)和常规脉冲伏安法(NPV)等多种电化学方法研究了黄芩甙在玻碳电极上的电化学行为,并建立了尿样和血清样品中黄芩甙的微分脉冲伏安(DPV)测定法。实验结果表明:黄芩甙在玻碳电极上的吸附符合Frumkin吸附等温式,吸附自由能为-35.01kJ mol。采用整体电解法求得电极反应电子数为2,并结合Nernst方程式推导了反应机理。黄芩甙在玻碳电极上预富集后,在4.20×10-10～1.05×10-5mol L范围内分段呈线性关系,对5.60×10-7mol L黄芩甙溶液连续6次测定的RSD=2.0%,检出限为2.8×10-10mol L。     

Voltammetric determination of phenylbutazone and oxyphenbutazone at a glassy carbon electrode

Linear-sweep and differential-pulse voltammetric methods are reported for the determination of phenylbutazone and oxyphenbutazone and of their pharmaceutical dosage forms. The methods are based on the electrochemical oxidation of phenylbutazone and oxyphenbutazone at a glassy carbon electrode in 0.1 M sodium acetate—0.1 M acetic acid in 98% ethanol. The mechanisms are discussed. The proposed methods show good reproducibility and are not subject to interference from common tablet excipients and from possible therapeutically active drug substances used in combination with phenylbutazone and oxyphenbutazone. A simple interrupted-sweep procedure can be used to determine phenylbutazone in the presence of oxyphenbutazone.