Facile synthesis of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> microsheets with porous micro-nanostructure as high-rate cathode materials for Li-ion batteries

Porous LiMn₂O₄ microsheets with micro-nanostructure have been successfully prepared through a simple carbon gel-combustion process with a microporous membrane as hard template. The crystal structure, morphology, chemical composition, and surface analysis of the as-obtained LiMn₂O₄ microsheets are characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscope (XPS). It can be found that the as-prepared LiMn₂O₄ sample presents the two-dimensional (2-D) sheet structure with porous structure comprised with nano-scaled particles. As cathode materials for lithium-ion batteries, the obtained LiMn₂O₄ microsheets show superior rate capacities and cycling performance at various charge/discharge rates. The LiMn₂O₄ microsheets exhibit a higher charge and discharge capacity of 137.0 and 134.7 mAh g^?1 in the first cycle at 0.5 C, and it remains 127.6 mAh g^?1 after 50 cycles, which accounts for 94.7% discharge capacity retention. Even at 10 C rate, the electrode also delivers the discharge capacity of 91.0 mAh g^?1 after 300 cycles (93.5% capacity retention). The superior electrochemical properties of the LiMn₂O₄ microsheets could be attributed to the unique microsheets with porous micro-nanostructure, more active sites of the Li-ions insertion/deinsertion for the higher contact area between the LiMn₂O₄ nano-scaled particles and the electrolyte, and better kinetic properties, suggesting the applications of the sample in high-power lithium-ion batteries.     

Electrochemical performance of LiMn2O4 microcubes prepared by a self-templating route

LiMn₂O₄ microcubes with a size of 10–15 μm have been synthesized by a facile self-templating route starting from cubic MnCO₃. The LiMn₂O₄ microcubes exhibit a hierarchical structure, where the cubes are stacked from parallel plates with a thickness of 200 nm, where each plate is composed of interconnected nanoparticles with a size of around 200 nm. The cubic LiMn₂O₄ shows excellent rate capability and high-rate cycling stability. At 10 C, it can yield a discharge capacity of 108 mAh g^?1. A discharge capacity of 88 mAh g^?1 can be retained after 100 cycles at 10 C. The excellent electrochemical performance makes it a promising cathode for high-power Li-ion batteries.     

Synthesis and electrochemical characterization of duo doped spinels (zinc and praseodymium) for use in lithium rechargeable batteries

LiMn₂O₄ and LiZn_xPr_yMn_2?x?yO₄ (x = 0.10–0.24; y = 0.01–0.10) powders have been synthesized by sol–gel method using palmitic acid as chelating agent. The synthesized samples have been subjected to thermo gravimetric and differential thermal analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDAX). The sol–gel route bestows low calcination temperature, shorter heating time, high purity, good control over stoichiometry, small particle size, high surface area, good surface morphology and better homogeneity, The XRD patterns reveal high degree of crystallinity and better phase purity. SEM and TEM images exhibit nano-sized nature particles with good agglomeration. EDAX peaks of Zn, Pr, Mn and O have been confirmed in actual compositions of LiMn₂O₄ and LiZn_xPr_yMn_2?x?yO₄. Charge–discharge studies of pristine spinel LiMn₂O₄ heated at 850 °C delivers discharge capacity of 132 mA h g^?1 corresponding to columbic efficiency of 73 % during the first cycle. At the end of 10th cycles, it delivers maximum discharge capacity of 112 mA h g^?1 with columbic efficiency of 70 % and capacity fade of 0.15 mA h g^?1 cycle^?1 over the investigated 10 cycles. Inter alia, all dopants concentrations, LiZn_0.10Pr_0.10Mn_1.80O₄ exhibits the better cycling performance (1st cycle discharge capacity: 130 mA h g^?1 comparing to undoped spinel 132 mA h g^?1) corresponding to columbic efficiency of 73 % with capacity fade of 0.12 mA h g^?1 cycle^?1.     

Porous,hollow Li<Subscript>1.2</Subscript>Mn<Subscript>0.53</Subscript>Ni<Subscript>0.13</Subscript>Co<Subscript>0.13</Subscript>O<Subscript>2</Subscript> microspheres as a positive electrode material for Li-ion batteries

A porous, hollow, microspherical composite of Li₂MnO₃ and LiMn_1/3Co_1/3Ni_1/3O₂ (composition: Li_1.2Mn_0.53Ni_0.13Co_0.13O₂) was prepared using hollow MnO₂ as the sacrificial template. The resulting composite was found to be mesoporous; its pores were about 20 nm in diameter. It also delivered a reversible discharge capacity value of 220 mAh g^?1 at a specific current of 25 mA g^?1 with excellent cycling stability and a high rate capability. A discharge capacity of 100 mAh g^?1 was obtained for this composite at a specific current of 1000 mA g^?1. The high rate capability of this hollow microspherical composite can be attributed to its porous nature.

Open image in new window

Graphical Abstract ?

     

Synthesis of γ-LiV2O5 nanorods as a high-performance cathode for Li ion battery

One-dimension γ-LiV₂O₅ nanorods were synthesized using VO₂(B) nanorods as precursor in this study. The as-prepared material is characterized by X-ray diffraction, X-ray photoelectron spectrometry, Fourier-transform infrared, transmission electron microscopy (TEM), cyclic voltammetry, and charge–discharge cycling test. TEM results show that LiV₂O₅ nanorods are 90–250 nm in diameter. The nanorods deliver a maximum discharge capacity of 284.3 mAh g^?1 at 15 mA g^?1 and 270.2 mAh g^?1 is maintained at the 15th cycle. Good rate performance is also observed with the discharge capacity of 250.1 and 202.6 mAh g^?1 at 50 and 300 mA g^?1, respectively. The capacity retention at 300 mA g^?1 is 84.2% over 50 cycles. The Li⁺ diffusion coefficient of LiV₂O₅ is calculated to be 10^-10–10^?9 cm² s^?1. It is demonstrated that the nanorod morphology could greatly facilitate to shorten lithium ion diffusion pathways and increase the contact area between active material and electrolyte, resulting in high capacity and rate performance for LiV₂O₅.     

Synthesis of high-energy-density LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> cathode through surficial Nb doping for lithium-ion batteries

LiMn₂O₄ is one of the most promising cathode materials due to its high abundance and low cost. However, the practical application of LiMn₂O₄ is greatly limited owing to its low volumetric energy density. Therefore, increasing its energy density is an urgent problem to be resolved. Herein, using the simple and mass production preferred solid-state reaction, surficial Nb-doped LiMn₂O₄ composed of the truncated octahedral or spherical-like primary particles are successfully synthesized. Auger electron spectroscopy (AES) and X-ray diffraction (XRD) characterizations confirm that most of Nb⁵⁺ enrich in the surficial layer of the particles to form a LiMn_2-xNb_xO₄ phase. This kind of doping can increase the specific discharge capacity of LiMn₂O₄ materials. Contrast with the pristine LiMn₂O₄, the discharge capacity of LiMn_1.99Nb_0.01O₄-based 18650R-type battery increases from 1497 to 1705 mAh with the volumetric energy density increasing by ~?13.9%, benefiting from the joint increments of the specific discharge capacity from 119.5 to 123.7 mAh g^?1 and the compacted density from 2.81 to 3.10 g cm^?3. Furthermore, the capacity retention after 500 cycles at 1 C (1500 mA) is also improved by 17.1%.

Open image in new window

Graphical abstract ?

     

Reduced Graphene‐Wrapped MnO2 Nanowires Self‐Inserted with Co3O4 Nanocages: Remarkable Enhanced Performances for Lithium‐Ion Anode Applications

A simple synthetic approach for graphene‐templated nanostructured MnO₂ nanowires self‐inserted with Co₃O₄ nanocages is proposed in this work. The Co₃O₄ nanocages were penetrated in situ by MnO₂ nanowires. As an anode, the as‐obtained MnO₂–Co₃O₄–RGO composite exhibits remarkable enhanced performance compared with the MnO₂–RGO and Co₃O₄–RGO samples. The MnO₂–Co₃O₄–RGO electrode delivers a reversible capacity of up to 577.4 mA h g^?1 after 400 cycles at 500 mA g^?1 and the Coulombic efficiency of MnO₂–Co₃O₄–RGO is about 96 %.     

Facile controlled synthesis of MnO2 nanowires for supercapacitors

In this report, a simple and facile method was developed for preparation of MnO₂ nanowires by calcinations of MnOOH nanowires previously synthesized under hydrothermal conditions, using hexamethylenetetramine as a reducing agent, without any template. The as-prepared MnO₂ nanowires displayed an enhanced specific capacitance (262.7 F g^?1) and good cycling stability (e.g., no loss within 1,500 cycles), showing good electrochemical performances as electrode material for supercapacitors.     

Facile fabrication of mesoporous manganese oxides as advanced electrode materials for supercapacitors

Mesoporous manganese oxides (MnO₂) were synthesized via a facile chemical deposition strategy. Three kinds of basic precipitants including sodium carbonate (Na₂CO₃), sodium bicarbonate (NaHCO₃), and sodium hydroxide (NaOH) were employed to adjust the microstructures and surface morphologies of MnO₂ materials. The obtained MnO₂ materials display different microstructures. Great differences are observed in their specific surface area and porosity properties. The microstructures and surface morphologies characteristics of MnO₂ materials largely determine their pseudocapacitive behavior for supercapacitors. The MnO₂ prepared with Na₂CO₃ precipitant exhibits the optimal microstructures and surface morphologies compared with the other two samples, contributing to their best electrochemical performances for supercapacitors when conducted either in the single electrode tests or in the capacitor measurements. The optimal MnO₂ electrode exhibits a high specific capacitance (173 F g^–1 at 0.25 A g^?1), high-rate capability (123 F g^?1 at 4 A g^?1), and excellent cyclic stability (no capacitance loss after 5,000 cycles at 1 A g^?1). The optimal activated carbon//MnO₂ hybrid capacitor exhibits a wide working voltage (1.8 V), high-power and high-energy densities (1,734 W kg^?1 and 20.9 Wh kg^?1), and excellent cycling behavior (93.8 % capacitance retention after 10,000 cycles at 1 A g^?1), indicating the promising applications of the easily fabricated mesoporous MnO₂ for supercapacitors.     

Comparison of corn starch-assisted sol–gel and combustion methods to prepare LiMn x Co y Ni z O2 compounds

In a novel attempt to exploit corn starch as gelling agent (in sol–gel method) and combustible fuel (in solution-assisted combustion method), high-capacity LiMn_0.4Ni_0.4Co_0.2O₂ and LiMn_1/3Ni_1/3Co_1/3O₂ cathode materials have been prepared and a comparison of electrochemical performance of the same has been made. Among the two compounds chosen for the study, LiMn_1/3Ni_1/3Co_1/3O₂ exhibits better physical and electrochemical properties. Particularly, LiMn_1/3Ni_1/3Co_1/3O₂ cathode synthesized using corn starch-assisted combustion method exhibits an appreciable capacity of 176 mAh g^?1, excellent capacity retention of 93 % up to 100 cycles and susceptible to rate capability test up to 1 C rate, thus qualifying the same for high-capacity and high-rate lithium battery applications. The study demonstrates the possibility of exploiting corn starch as gelling agent and as a combustible fuel in synthesizing lithium intercalating oxide compounds with improved electrochemical behaviour.     

Nitridated mesoporous Li4Ti5O12 spheres for high-rate lithium-ion batteries anode material

Nitridated mesoporous Li₄Ti₅O₁₂ spheres were synthesized by a simple ammonia treatment of Li₄Ti₅O₁₂ derived from mesoporous TiO₂ particles and lithium acetate dihydrate via a solid state reaction in the presence of polyethylene glycol 20000. The carbonization of polyethylene glycol could effectively restrict the growth of primary particles, which was favorable for lithium ions diffusing into the nanosized TiO₂ lattice during the solid state reaction to form a pure phase Li₄Ti₅O₁₂. After a subsequent thermal nitridation treatment, a high conductive thin TiO _x N _y layer was in situ constructed on the surface of the primary nanoparticles. As a result, the nitridated mesoporous Li₄Ti₅O₁₂ structure, possessing shorter lithium-ion diffusion path and better electrical conductivity, displays significantly improved rate capability. The discharge capacity reaches 138 mAh?g^?1 at 10 C rate and 120 mAh?g^?1 at 20 C rate in the voltage range of 1–3 V.     

Study of carbon surface-modified Li[Li0.2Mn0.54Ni0.13Co0.13]O2 for high-capacity lithium ion battery cathode

Carbon surface-modified Li-excess layered oxide solid solution Li[Li_0.2Mn_0.54Ni_0.13Co_0.13]O₂ cathode is fabricated through a liquid phase route using polyvinylpyrrolidone as carbon source. X-ray diffraction and X-ray photoelectron spectroscopy indicate that the crystal structure and the chemical states of elements for Li[Li_0.2Mn_0.54Ni_0.13Co_0.13]O₂ are kept after carbon surface treatment. The high-resolution transmission electron microscopy demonstrated the existence of very little carbon on the surface and the clear boundary after carbon treatment. The carbon surface-modified sample delivers a discharge capacity of 293.2 mAh?g^?1 at C/10 rate (suppose 1 C rate?=?250 mA?g^?1) and 191.6 mAh?g^?1 at 1 C rate between 2.0 and 4.8 V; the capacity retention rate is ～86 % after 70 cycles at 1 C rate. Superior electrochemical properties can be contributed to the carbon surface modification in these aspects including minimizing nanoparticle aggregation and cell polarization, increasing the electronic conductivity, suppressing the elimination of oxide ion vacancies, as well as suppressing the formation of the thick solid electrolyte interfacial layer. Moreover, the annealing process of carbon surface modification might be able to consume Li₂CO₃ impurity partly and cause the recrystallization of the surface disordered layer.     

Sucrose assisted hydrothermal synthesis of SnO2/graphene nanocomposites with improved lithium storage properties

SnO₂/graphene nanocomposites are synthesized by a new hydrothermal treatment strategy under the assistance of sucrose. From the images of the scanning electron microscope (SEM) and transmission electron microscope (TEM), it can be observed that SnO₂ nanoparticles with the size of 4~5 nm uniformly distribute on the graphene nanosheets. The result demonstrates that sucrose can effectively prevent graphene nanosheets from restacking during hydrothermal treatment and subsequently treatment. The charging/discharging test result indicates that the SnO₂/graphene nanocomposites exhibit high specific capacity and excellent cycleability. The first reversible specific capacity is 729 mAh.g^?1 at the current density of 50 mA.g^?1, and remains 646 mAh.g^?1 after 30 cycles at the current density of 100 mA.g^?1, 30 cycles at the current density of 200 mA.g^?1, 30 cycles at the current density of 400 mA.g^?1, 30 cycles at the current density of 800 mA.g^?1, and 30 cycles at the current density of 50 mA.g^?1.     

Synthesis and electrochemical characteristics of oxysulfide spinel material for lithium secondary batteries

Oxysulfide spinel LiMn₂O_3.98S_0.02 powders with monodispersed, and highly homogeneous particles were synthesized by a sol-gel method using an aqueous solution of metal acetates and sulfide containing glycolic acid as a chelating agent. The oxysulfide spinel, LiMn₂O_3.98S_0.02 electrode initially delivers 80 mAh g⁻¹, steadily increases during cycling, and reaches 99 mAh g⁻¹ at the 20th cycle. The substitution of a small amount S for O in LiMn₂O₄ spinel helps to maintain structural integrity during cycling, which then overcomes the Jahn–Teller distortion in the spinel Mn phase in the 3 V region.     

Preparation of spherical spinel LiMn2O4 cathode material for lithium ion batteries

A novel process is proposed for synthesis of spinel LiMn₂O₄ with spherical particles from the inexpensive materials MnSO₄, NH₄HCO₃, and NH₃H₂O. The successful preparation started with carefully controlled crystallization of MnCO₃, leading to particles of spherical shape and high tap density. Thermal decomposition of MnCO₃ was investigated by both DTA and TG analysis and XRD analysis of products. A precursor of product, spherical Mn₂O₃, was then obtained by heating MnCO₃. A mixture of Mn₂O₃ and Li₂CO₃ was then sintered to produce LiMn₂O₄ with retention of spherical particle shape. It was found that if lithium was in stoichiometric excess of 5% in the calcination of spinel LiMn₂O₄, the product had the largest initial specific capacity. In this way spherical particles of spinel LiMn₂O₄ were of excellent fluidity and dispersivity, and had a tap density as high as 1.9 g cm^–3 and an initial discharge capacity reaching 125 mAh g^–1. When surface-doped with cobalt in a 0.01 Co/Mn mole ratio, although the initial discharge capacity decreased to 118 mAh g^–1, the 100th cycle capacity retention reached 92.4% at 25°C. Even at 55°C the initial discharge capacity reached 113 mAh g^–1 and the 50th cycle capacity retention was in excess of 83.8%.     

Ruthenium‐Oxide‐Coated Sodium Vanadium Fluorophosphate Nanowires as High‐Power Cathode Materials for Sodium‐Ion Batteries

Sodium‐ion batteries are a very promising alternative to lithium‐ion batteries because of their reliance on an abundant supply of sodium salts, environmental benignity, and low cost. However, the low rate capability and poor long‐term stability still hinder their practical application. A cathode material, formed of RuO₂‐coated Na₃V₂O₂(PO₄)₂F nanowires, has a 50 nm diameter with the space group of I4/mmm. When used as a cathode material for Na‐ion batteries, a reversible capacity of 120 mAh g^?1 at 1 C and 95 mAh g^?1 at 20 C can be achieved after 1000 charge–discharge cycles. The ultrahigh rate capability and enhanced cycling stability are comparable with high performance lithium cathodes. Combining first principles computational investigation with experimental observations, the excellent performance can be attributed to the uniform and highly conductive RuO₂ coating and the preferred growth of the (002) plane in the Na₃V₂O₂(PO₄)₂F nanowires.     

One‐Step Pyro‐Synthesis of a Nanostructured Mn3O4/C Electrode with Long Cycle Stability for Rechargeable Lithium‐Ion Batteries

A nanostructured Mn₃O₄/C electrode was prepared by a one‐step polyol‐assisted pyro‐synthesis without any post‐heat treatments. The as‐prepared Mn₃O₄/C revealed nanostructured morphology comprised of secondary aggregates formed from carbon‐coated primary particles of average diameters ranging between 20 and 40 nm, as evidenced from the electron microscopy studies. The N₂ adsorption studies reveal a hierarchical porous feature in the nanostructured electrode. The nanostructured morphology appears to be related to the present rapid combustion strategy. The nanostructured porous Mn₃O₄/C electrode demonstrated impressive electrode properties with reversible capacities of 666 mAh g^?1 at a current density of 33 mA g^?1, good capacity retentions (1141 mAh g^?1 with 100 % Coulombic efficiencies at the 100^th cycle), and rate capabilities (307 and 202 mAh g^?1 at 528 and 1056 mA g^?1, respectively) when tested as an anode for lithium‐ion battery applications.     

The electrochemical performance of sodium-ion-modified spinel LiMn2O4 used for lithium-ion batteries

The spinel LiMn₂O₄ cathode material has been considered as one of the most potential cathode active materials for rechargeable lithium ion batteries. The sodium-doped LiMn₂O₄ is synthesized by solid-state reaction. The X-ray diffraction analysis reveals that the Li_1?x Na _x Mn₂O₄ (0?≤?x?≤?0.01) exhibits a single phase with cubic spinel structure. The particles of the doped samples exhibit better crystallinity and uniform distribution. The diffusion coefficient of the Li_0.99Na_0.01Mn₂O₄ sample is 2.45?×?10^?10 cm^?2 s^?1 and 3.74?×?10^?10 cm^?2 s^?1, which is much higher than that of the undoped spinel LiMn₂O₄ sample, indicating the Na⁺-ion doping is favorable to lithium ion migration in the spinel structure. The galvanostatic charge–discharge results show that the Na⁺-ion doping could improve cycling performance and rate capability, which is mainly due to the higher ion diffusion coefficient and more stable spinel structure.     

Comparative investigations of LiVPO4F/C and Li3V2(PO4)3/C synthesized in similar soft chemical route

Triclinic LiVPO₄F and monoclinic Li₃V₂(PO₄)₃ are synthesized through a soft chemical process with mechanical activation assist, followed by annealing. In this process, ascorbic acid is used as reducing agent as well as carbon source. The as-prepared samples are coated with amorphous carbon. XPS analysis results show the expected valency states of ions in LiVPO₄F and Li₃V₂(PO₄)₃. The electrochemical properties of the prepared LiVPO₄F/C and Li₃V₂(PO₄)₃/C cathodes are evaluated. The as-prepared LiVPO₄F/C cathode shows an initial discharge specific capacity of 140?±?3 mAh?g^?1 at 30 mA?g^?1 in the voltage range of 3.0~4.4 V, compared with that of 138?±?3 mAh?g^?1 possessed by Li₃V₂(PO₄)₃/C. Both samples exhibit good cycle performance at different current densities. The capacity delivered by LiVPO₄F remains 95.5 and 91.7 % of its initial discharge capacity after 50 cycles at 150 and 750 mA?g^?1, respectively, while 97.4 and 90.6 % for Li₃V₂(PO₄)₃/C. But the rate capability of LiVPO₄F/C is not so good compared with as-prepared Li₃V₂(PO₄)₃/C.     

Kinetics of Li-ion transfer reaction at LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>, LiCoO<Subscript>2</Subscript>, and LiFePO<Subscript>4</Subscript> cathodes

Kinetics of LiFePO₄, LiMn₂O₄, and LiCoO₂ cathodes operating in 1 M LIPF₆ solution in a mixture of ethylene carbonate and dimethyl carbonate was deduced from impedance spectra taken at different temperatures. The most striking difference of electrochemical impedance spectroscopy (EIS) curves is the impedance magnitude: tens of ohms in the case of LiFePO₄, hundreds of ohms for LiMn₂O₄, and thousands of ohms for LiCoO₂. Charge transfer resistances (R _ct) for lithiation/delitiation processes estimated from the deconvolution procedure were 6.0 Ω (LiFePO₄), 55.4 Ω (LiCoO₂), and 88.5 Ω (LiMn₂O₄), respectively. Exchange current density for all the three tested cathodes was found to be comparable (0.55–1·10^?2 mAcm^?2, T = 298 K). Corresponding activation energies for the charge transfer process, \( {E}_{ct}^{\#} \), differed considerably: 66.3, 48.9, and 17.0 kJmol^?1 for LiMn₂O₄, LiCoO₂, and LiFePO₄, respectively. Consequently, temperature variation may have a substantial influence on exchange current densities (j _o) in the case of LiMn₂O₄ and LiCoO₂ cathodes.