A high-performance hybrid supercapacitor with Li4Ti5O12-C nano-composite prepared by in situ and ex situ carbon modification

In this work, we report on the synthesis of in situ and ex situ carbon-modified Li₄Ti₅O₁₂-C (LTO-C) nano-composite and its application in a hybrid supercapacitor constructed using activated carbon (AC) and LTO-C nano-composite as positive and negative electrodes, respectively. The hybrid capacitors are characterized by galvanostatic charge–discharge, cycle life testing, and electrochemical impedance spectroscopy. The results reveal that the AC/LTO-C hybrid capacitors exhibit high rate capability and long cycle life. In the potential range of 1.5–3.0 V, the AC/LTO-C hybrid system can deliver a specific capacitance of 83 F?g^?1 based on the total mass of AC and LTO-C electrodes at a current density of 60 mA g^?1 (2 C rate). At a higher discharge rate of 980 mA g^?1 (32 C), the capacity is 68 F?g^?1, about 82?% of that at 2 C rate. After 9,000 deep cycles at 32 C, the hybrid capacitor still maintains 84?% of its initial capacitance. The specific energy of such hybrid system is 20 Wh kg^?1, which is at least twice that of an AC/AC system. Combining the high energy density with power capability, the AC/LTO-C hybrid supercapacitor has demonstrated high performance for applications needing high power output.     

Hybrid system of nickel<Emphasis Type="Bold">–</Emphasis>cobalt hydroxide on carbonised natural cellulose materials for supercapacitors

Advanced carbon materials formed from abundant biomass are an exciting and promising class for energy devices due to the clear advantages of low cost, sustainability and good physical and electrochemical properties. However, these materials typically do not compete well with their metal functionalised counterparts. In this work, we demonstrate that xCo(OH)₂–(1?x)Ni(OH)₂ with various Ni:Co ratios can be deposited onto biomass-derived carbon to make a hybrid inorganic-carbon electrode with tuneable physical features and electrochemical performance. These features were tuned by adjusting the Ni:Co ratio within precursor solutions. The electrodes had shown a capacitance ranging from 780.7 to 2041 F g^?1, which is very close to the theoretical value for Ni(OH)₂ (2365 F g^?1). A hypothesis is presented to help explain this performance for a modified, biomass-derived carbon electrode.     

Meso-macroporous Co3O4 electrode prepared by polystyrene spheres and carbowax templates for supercapacitors

Meso-macroporous Co₃O₄ electrode is synthesized by drop coating with a mixed solution containing Co(OH)₂ colloid, polystyrene spheres, and carbowax (namely polyethylene glycol), followed by calcining at 400?°C to remove polystyrene spheres and carbowax. For comparison, nonporous Co₃O₄ and mesoporous Co₃O₄ electrodes are prepared by drop coating with Co(OH)₂ colloid and with a mixed solution containing Co(OH)₂ colloid and carbowax under the same condition, respectively. Capacitive property of these electrodes is measured by cyclic voltammetry, potentiometry and electrochemical impedance spectroscopy. The results show that meso-macroporous Co₃O₄ electrode exhibits larger specific capacitance than those of nonporous Co₃O₄ electrode and mesoporous Co₃O₄ electrode at various current densities. The specific capacitance of meso-macroporous Co₃O₄ electrode at the current density of 0.2?A?g^?1 is 453?F?g^?1. Meanwhile, meso-macroporous Co₃O₄ electrode possesses the highest specific capacitance retention ratio at the current density ranging from 0.2 to 1.0?A?g^?1, indicating that meso-macroporous Co₃O₄ electrode suits to high-rate charge?Cdischarge.     

An Electrochemical Route to Quantitative Oxidation of Graphene Frameworks with Controllable C/O Ratios and Added Pseudocapacitances

We report an electrochemical oxidation route to tunable C/O ratios in the graphene framework, creating enhanced pseudocapacitance with increasing oxygen content. Controlled surface functionalities on graphene enable a high specific capacitance and negligible electric conductivity loss. A specific capacitance of up to 279 F g^?1 was achieved for the functionalized graphene at a discharge current of 1 A g^?1 in 1 M H₂SO₄ electrolyte; this capacitance remained as high as 152 F g^?1 at 100 A g^?1. These values are much higher than those of non‐oxidized graphene. These excellent performances of the functionalized graphene signify the importance of precise control of the surface chemistry of graphene‐based materials.     

Nanostructured ferrite/graphene/polyaniline using for supercapacitor to enhance the capacitive behavior

Graphene nanosheets, polyaniline (PANI), and nanocrystallites of transition metal ferrite {Fe₃O₄ (Mag), NiFe₂O₄ (NiF), and CoFe₂O₄ (CoF)} have been prepared and characterized via XRD, FTIR, SEM, TEM, UV–vis spectroscopy, cyclic voltammetry, galvanostatic charge discharges, and impedance spectroscopy. Electrochemical measurements showed that supercapacitances of hybrid electrodes made of the ternary materials are higher than that of hybrid electrode made of binary or single material. The ternary hybrid CoF/graphene (G)/PANI electrode exhibits a highest specific capacitance reaching 1123 Fg^?1, an energy density of 240 Wh kg^?1 at 1 A g^?1, and a power density of 2680 Wkg^?1 at 1 A g^?1 and outstanding cycling performance, with 98.2% capacitance retained over 2000 cycles. The extraordinary electrochemical performance of the ternary CoF/G/PANI hybrid can be attributed to the synergistic effects of the individual components. The PANI conducting polymer enhances an electron transport. The Ferrite nanoparticles prevent the restocking of the carbon sheets and provide Faradaic processes to increase the total capacitance.     

Nanostructured Fe2O3–graphene composite as a novel electrode material for supercapacitors

Nanostructured Fe₂O₃–graphene composite was successfully fabricated through a facile solution-based route under mild hydrothermal conditions. Well-crystalline Fe₂O₃ nanoparticles with 30–60?nm in size are highly encapsulated in graphene nanosheet matrix, as demonstrated by various characterization techniques. As electrode materials for supercapacitors, the as-obtained Fe₂O₃–graphene nanocomposite exhibits large specific capacitance (151.8?F?g^?1 at 1?A?g^?1), good rate capability (120?F?g^?1 at 6?A?g^?1), and excellent cyclability. The significantly enhanced electrochemical performance compared with pure graphene and Fe₂O₃ nanoparticles may be attributed to the positive synergetic effect between Fe₂O₃ and graphene. In virtue of their superior electrochemical performance, they will be promising electrode materials for high-performance supercapacitors applications.     

Preparation of activated carbon from waste Camellia oleifera shell for supercapacitor application

The cost-effective activated carbons derived from waste Camellia oleifera shell (COS) by ZnCl₂ activation method are investigated as the active electrode material in electric double-layer capacitors (EDLCs) for the first time. The activation temperature and ZnCl₂/COS impregnation ratio are two key factors affecting the surface area and pore structure of the prepared activated carbons, which accordingly affect their capacitive performances. Electrochemical investigations indicate that the activated carbon (AC-3-600) obtained at the activation temperature of 600 °C and impregnation ratio of 3 shows the maximum specific capacitance of 374 and 266 F?g^?1 in 1 mol L^?1 H₂SO₄ and 6 mol L^?1 KOH electrolytes at 0.2 A g^?1, respectively. The high capacitance of the AC-3-600 is attributed to its high surface area (1,935 m² g^?1), high total pore volume (1.02 cm³ g^?1), and especially the large percentage of micropores (735 m² g^?1). Meanwhile, the activated carbon presents good cycle stability in both acid and alkaline electrolytes during 5,000 cycles at a fair current density of 4 A g^?1. So, we had reasons to believe that the activated carbons from waste COS by ZnCl₂ activation might be one of the innovative carbon electrode materials for EDLCs application.     

Pyrrolic nitrogen-doped carbon sandwiched monolayer MoS<Subscript>2</Subscript> vertically anchored on graphene oxide for high-performance sodium-ion battery anodes

In this work, a novel pyrrolic nitrogen-doped carbon sandwiched monolayer MoS₂ hybrid was prepared. This sandwiched hybrid vertically anchors on graphene oxide as anode materials for sodium-ion batteries. Such electrode was fabricated by facile ionic liquid-assisted reflux and annealing methods. Owing to rational structure and enhancement from pyrrolic nitrogen dopant, this unique MoS₂/C-graphene hybrid exhibits reversible specific capacity of 486 mAh g^?1 after 1000 cycles with a low average fading capacity of 0.15 mAh g^?1 (fading cyclic rate of ca. 0.03% per cycle). A capacity of 330 mAh g^?1 is remained at the current densities of 10.0 A g^?1. The proposed strategy provides a convenient way to create new pyrrolic nitrogen-doped hybrids for energy field and other related applications.     

Hybrid materials utilizing polyelectrolyte-derivatized carbon nanotubes and vanadium-mixed addenda heteropolytungstate for efficient electrochemical charging and electrocatalysis

Preparation and electrochemical behavior of new hybrid materials composed of multi-walled carbon nanotubes (CNTs) that were derivatized with poly(diallyldimethylammonium) chloride and modified with vanadium-mixed addenda Dawson-type heteropolytungstate, [P₂W₁₇VO₆₂]^8?, is described here. These nanostructured composite systems exhibited fast dynamics of charge propagation. They were characterized by the transport (effectively diffusional) kinetic parameter of approximately 8?×?10^?8 cm^?2 s^?1/2 and the specific capacitance parameter of 82 F g^?1 (at the charging/discharging current of 200 mA g^?1). The latter parameter for bare CNTs was found to be only 50 F g^?1 under analogous conditions. These observations were based on the results of galvanostatic charging–discharging, cyclic voltammetric, and AC impedance spectroscopic measurements. The improved capacitance properties were attributed to the systems’ pseudocapacitive features originating from the fast redox transitions of the [P₂W₁₇VO₆₂]^8? polyanions. In addition to the fast redox conduction, the proposed organic–inorganic hybrid materials exhibited interesting electrocatalytic activity toward reduction of bromate in the broad concentration range (sensitivity, 0.24 mA cm^?2 mmol^?1 dm³).     

Flower-like NiO microspheres prepared by facile method as supercapacitor electrodes

Hierarchical flower-like NiO microsphere was successfully synthesized by a simple one-step template-free hydrothermal process, using l-lysine as precipitator and nickel sulfate as nickel source. The as-synthesized materials were characterized by X-ray diffraction, field emission scanning electron microscope, high-resolution transmission electron microscope, and the electrochemical workstation. The electrochemical results show that the flower-like NiO microspheres exhibit specific capacitance as large as 324 F?g^?1 at the current density of 2 A?g^?1 and the specific capacitance retention can maintain 83 % after 1,000 cycles at the current density of 20 A?g^?1 in 6 M KOH.     

In situ synthesis of crosslinked-polyaniline nano-pillar arrays/reduced graphene oxide nanocomposites for supercapacitors

Crosslinked-polyaniline (CPA) nano-pillar arrays adsorbed on the surface of reduced graphene oxide (RGO) sheets were synthesized by in situ solution polymerization through two steps of reduction. The electrochemical analyses demonstrated that the befittingly reduced CPA/RGO composite exhibited high performance as electrode materials for supercapacitors. The CPA/RGO composite showed very high specific capacitance of 1532 F g^?1 at a scan rate of 10 mV s^?1 or 694 F g^?1 at a current density of 2 A g^?1 in 1 M H₂SO₄ electrolyte, as well as great energy density of 61.4 W h kg^?1 at a current density of 2 A g^?1. The electrode material also had decent power density of 4 kW kg^?1 at a current density of 10 A g^?1, and good cycling stability of 92.5 % capacitance retained after 500 cycles of cyclic voltammetry at 500 mV s^?1. The neat microstructures and super electrochemical properties suggest the potential use of the composites in supercapacitors.     

Porous cobalt hydroxide film electrodeposited on nickel foam with excellent electrochemical capacitive behavior

A new porous cobalt hydroxide film has been successfully electrodeposited on nickel foam from 0.1?M cobalt nitrate electrolyte at ?1.0?V vs. SCE without adding any surfactant. The microstructure and surface morphology of prepared cobalt hydroxide films were physically characterized by X-ray diffraction analysis and scanning electron microscopy. The results indicate that an interlaced network structure was obtained. The effects of electrodeposition time, deposition potential, and different substrates on the specific capacitance and microstructure of prepared porous ??-Co(OH)₂ thin film were systematically studied. The results indicate that the film deposited on nickel foam at ?1.0?V has excellent electrochemical properties. A maximum specific capacitance of 1473?F?g^?1 could be achieved at a current density of 2?A?g^?1.     

Preparation and performance of polyvinyl alcohol-based activated carbon as electrode material in both aqueous and organic electrolytes

Porous carbon materials with high surface area and different pore structure have been successfully prepared by phenolic resin combined with polyvinyl alcohol (PVA) and KOH as activation agents. The surface morphology, structure, and specific surface area of the carbon materials were studied by scanning electron microscopy, X-ray diffraction, and nitrogen sorption measurement, respectively. Furthermore, the effects of specific surface area, pore structure, and electrolyte on electrochemical properties were investigated by galvanostatic charge–discharge measurement. The results show that KOH–PVA-activated carbon materials display specific capacitance as high as 218 F?g^?1 in 30 wt.% KOH aqueous electrolyte, 147 F?g^?1 in 1 M LiPF₆/(ethylene carbonate (EC) + dimethyl carbonate) (1:1?v/v), and 115 F?g^?1 in 1 M Et₃MeNBF₄/propylene carbonate organic electrolyte, respectively. In addition, the carbon materials demonstrate long-term cycle stability, especially the AK3P-0.30 in aqueous electrolyte and the AK2P-0.30 with excellent rate capability in organic electrolyte. These reveal that the existence of a micro-mesoporous structure of activated carbon is beneficial to store energy in an aqueous supercapacitor and broad pore size distribution of activated carbon is favorable to energy storage in an organic supercapacitor. The carbon materials with pore size distribution in different ranges improve the electrochemical performance of supercapacitor in different electrolytes. A new pore-expand agent (PVA combining with KOH) was used to obtain porous carbons with enhanced properties for supercapacitor.     

Mechanochemically prepared polyaniline and graphene-based nanocomposites as electrodes of supercapacitors

Conductive nanocomposites based on polyaniline and graphene (PAni/Gr) were prepared by cheap and efficient mechanochemical method. The uniform distribution of Gr nanoparticles in the polymer matrix and the ordering of the polymer chains due to the action of mechanical shear stresses, which were established by TEM, stipulated high specific capacitance about 920 F g^?1 in ??0.2–1.0 V vs. Ag/AgCl potential range. PAni/Gr-based electrodes are able to provide the specific capacitance of ~?750 F g^?1 at 2 A g^?1 in symmetric supercapacitors (SSC) and stably cycle at the operating voltage V?=?0.65 V for 10,000 charge-discharge cycles with 96% capacitance retention, whereas the increasing of V leads to the loss of stability as a result of the cathode degradation. PAni/Gr-based SSC possessed improved self-discharge showed high rate capability, and the specific power of such SSC could reach ~?10 kW kg^?1 at the specific energy of ~?18 W h kg^?1.     

Synthesis, characterization, and supercapacitive properties of β-Co(OH)2 leaf-like nanostructures

Leaf-like nanostructures of ??-Co(OH)₂ were successfully prepared via galvanostatically cathodic electrodeposition at the current density of 1?mA?cm^?2 from an aqueous 0.005?M Co(NO₃)₂ bath. The bath temperature was fixed at 60?°C. The XRD and FTIR results revealed that the prepared sample has a single phase of the hexagonal brucite-like ??-Co(OH)₂. Morphological characterization by SEM showed that the prepared ??-Co(OH)₂ was composed of discrete leaf-like nanostructures with edge lengths ranging from 250 to 450?nm. The electrochemical performance of the prepared ??-Co(OH)₂ was evaluated using cyclic voltammetry and charge?Cdischarge tests. A maximum specific capacitance of 772.8?F?g^?1 was obtained in aqueous 1?M KOH with the potential range of ?0.3?C0.5?V (vs. Ag/AgCl) at scan rate of 10?mV?s^?1, suggesting the potential application of the prepared nanostructures in electrochemical supercapacitors. Result of this work showed that cathodic electrodeposition can be recognized as a facile method for the preparation of cobalt hydroxide.     

Preparation of activated carbon from cotton stalk and its application in supercapacitor

High specific capacitance and low cost are the critical requirements for a practical supercapacitor. In this paper, a new activated carbon with high specific capacitance and low cost was prepared, employing cotton stalk as the raw material, by using the phosphoric acid (H₃PO₄) chemical activation method. The optimized conditions were as follows: the cotton stalk and activating agent with a mass ratio of 1:4 at an activation temperature of 800 °C for 2 h. The samples were characterized by nitrogen adsorption isotherms at 77 K. The specific surface area and pore volume of activated carbon were calculated by Brunauer–Emmett–Teller (BET) and t-plot methods. With these experimental conditions, an activated carbon with a BET surface area of 1,481 cm²?g^?1 and micropore volume of 0.0377 cm³?g^?1 was obtained. The capacitance of the prepared activated carbon was as high as 114 F?g^?1.The results indicate that cotton stalk can produce activated carbon electrode materials with low cost and high performance for electric double-layer capacitor.     

Asymmetric supercapacitors based on stabilized α-Ni(OH)2 and activated carbon

In this work, stabilized Al-substituted α-Ni(OH)₂ materials were successfully synthesized by a chemical coprecipitation method. The experimental results showed that the 7.5% Al-substituted α-Ni(OH)₂ materials exhibited high specific capacitance (2.08?×?10³ F/g) and excellent rate capability due to the high stability of Al-substituted α-Ni(OH)₂ structures in alkaline media, suggesting its potential application in electrode material for supercapacitors. To enhance energy density, an asymmetric type pseudo/electric double-layer capacitor was considered where α-Ni(OH)₂ materials and activated carbon act as the positive and negative electrodes, respectively. Values for the maximum specific capacitance of 127 F/g and specific energy of 42 W·h/kg were demonstrated for a cell voltage between 0.4 and 1.6 V. By using the α-Ni(OH)₂ electrode, the asymmetric supercapacitor exhibited high energy density and stable power characteristics. The hybrid supercapacitor also exhibited a good electrochemical stability with 82% of the initial capacitance over consecutive 1,000 cycle numbers.     

Preparation and electrochemical performance of the layered cobalt oxide (Co3O4) as supercapacitor electrode material

Layered Co₃O₄ composed of oriented self-assembled micrometer-length rectangular 2D flakes has been successfully synthesized by a hydrothermal method in combination with subsequent calcination process. Structural and morphological characterizations were performed using powder X-ray diffraction and field emission scanning electron microscopy. The component and thermal stability of the sample were measured by FT-IR and thermal analyses, including thermogravimetry and differential thermal analysis. The electrochemical performances of the as-prepared Co₃O₄ product were investigated by cyclic voltammetry, electrochemical impedance spectroscopy (EIS), and constant current charge/discharge techniques. The electrochemical results demonstrate that the layered Co₃O₄ product displays good capacitive behavior with a specific capacitance of 263 F?g^?1 within a potential range of ?0.4–0.55 V at a current density of 1 A?g^?1 and a large capacity retention with 89.4 % of the initial capacitance over 1,000 consecutive cycles at 3 A?g^?1, indicating that the as-prepared Co₃O₄ product can be a promising electroactive material for supercapacitor.     

The production of activated carbon from cation exchange resin for high-performance supercapacitor

High-performance activated carbon for electrochemical double-layer capacitors (EDLC) has been prepared from cation exchange resin by carbonization and subsequent activation with KOH. The activation temperature has a key role in the determination of porous carbon possessing high surface areas, and large pore structures. The porous carbon activated at 700 °C (carbon-700-1:4) has high surface area (2236 m²?g^?1) and large total pore volume (1.15 cm³?g^?1), which also displays best capacitive performances due to its well-balanced micro- or mesoporosity distribution. In details, specific capacitances of the carbon-700-1:4 sample are 336.5 F?g^?1 at a current density of 1 A?g^?1 and 331.8 F?g^?1 at 2 A?g^?1. At high current density as 20 A?g^?1, the retention of its specific capacitance is 68.4 %. The carbon-700-1:4 sample also exhibits high performance of energy density (46.7 Wh?kg^?1) and long cycle stability (～8.9 % loss after 3,000 cycles). More importantly, due to the amount of waste ion-exchange resins increasing all over the world, the present synthetic method might be adopted to dispose them, producing high-performance porous carbons for EDLC electrode materials.     

Design of high-performance core-shell hollow carbon nanofiber@nickel-cobalt double hydroxide composites for supercapacitive energy storage

The supercapacitive performances of supercapacitor mainly depend on the physical nanostructure and micro-morphology of electrode materials. Here, we demonstrated the design, synthesis and electrochemical performances of core-shell hollow carbon nanofiber@nickel-cobalt-layered double hydroxide (HCNF@ Ni_0.67Co_0.33-LDH) nanocomposites with an optimized Ni/Co molar ratio of 2:1. The HCNF was used as superiorly conductive core to sustain the nanoporous silky Ni_0.67Co_0.33-LDH shell, which can efficiently provide fast transport pathways for electrons and electrolyte ions. The outstanding specific capacitance of 2486 F g^?1 at 1 A g^?1 based on galvanostatic charge-discharge curves were acquired for the highly electroactive HCNF@Ni_0.67Co_0.33-LDH. Furthermore, the HCNF@Ni_0.67Co_0.33-LDH electrode delivered a distinguished rate capability with a specific capacitance of 1890 F g^?1 even at 15 A g^?1. Notably, an asymmetric supercapacitor with HCNF@Ni_0.67Co_0.33-LDH as cathode and HCNF as anode was devised, which presented a prominent specific capacitance of 228 F g^?1, good energy density of 62.1 Wh kg^?1, and impressive cycling stability (90.6% capacitance retention after 10,000 cycles).