Time-dependent density functional theory based on a noncollinear formulation of the exchange-correlation potential

In this study we have introduced a formulation of time-dependent density functional theory (TDDFT) based on a noncollinear exchange-correlation potential. This formulation is a generalization of conventional TDDFT. The form of this formulation is exactly the same as that of the conventional TDDFT for the excitation energies of transitions that do not involve spin flips. In addition, this noncollinear TDDFT formulation allows for spin-flip transitions. This feature makes it possible to resolve more fully excited state spin multiplets, while for closed-shell systems, the spin-flip transitions will result in singlet-triplet excitations and this excitation energy calculated from this formulation of TDDFT is exactly the same as that from ordinary TDDFT. This formulation is applied to the dissociation of H(2) in its (1)Sigma(g) (+) ground state and (1)Sigma(u) (+) and (3)Sigma(u) (-) excited states with (3)Sigma(u) (-) (M(s)=+1) as the reference state and the multiplets splitting of some atoms.     

Development and Optimization of Methylcellulose-Based Nanoemulgel Loaded with Nigella sativa Oil for Oral Health Management: Quadratic Model Approach

The present study aimed to develop a local dental nanoemulgel formulation of Nigella sativa oil (NSO) for the treatment of periodontal diseases. NSO purchased from a local market was characterized using a GC–MS technique. A nanoemulsion containing NSO was prepared and incorporated into a methylcellulose gel base to develop the nanoemulgel formulation. The developed formulation was optimized using a Box–Behnken statistical design (quadratic model) with 17 runs. The effects of independent factors, such as water, oil, and polymer concentrations, were studied on two dependent responses, pH and viscosity. The optimized formulation was further evaluated for droplet size, drug release, stability, and antimicrobial efficacy. The developed formulation had a pH of 7.37, viscosity of 2343 cp, and droplet size of 342 ± 36.6 nm. Sustained release of the drug from the gel for up to 8 h was observed, which followed Higuchi release kinetics with non-Fickian diffusion. The developed nanoemulgel formulation showed improved antimicrobial activity compared to the plain NSO. Given the increasing emergence of periodontal diseases and antimicrobial resistance, an effective formulation based on a natural antibacterial agent is warranted as a dental therapeutic agent.     

Fluids in porous media. III. Scaled particle theory

Based on a new and consistent formulation of scaled particle theory for a fluid confined in random porous media, a series of new approximations are proposed and one of them gives equations of state with excellent accuracy for a hard sphere fluid adsorbed in a hard sphere or an overlapping hard sphere matrix. Although the initial motivation was to remedy a flaw in a previous formulation of the scaled particle theory for a confined fluid, the new formulation is not a trivial and straightforward correction of the previous one. A few conceptual and significant modifications have to be introduced for developing the present formulation.     

Study of the Effect of the Interaction Between Kaolin and Surfactant Blend (AOS: APG C12) on the Solubility,Dispersibility, and Wetting Property of the Pesticide Granule

The extensive use of pesticides in agriculture in particular herbicides is a serious environmental threat. There is an urgent need to develop pesticide formulation that combines optimum bioactivity and minimum dosage. In the present article an attempt has been made to design granular formulation of one of the most commonly used herbicide, atrazine (AT). This potent herbicide along with kaolin as the carrier and suitable clay modifiers can be thought as one of the potential way of formulation keeping in view the desired dosage and bioavailability of the same. The process of granule formulation was carried out using the principle of rapid mix granulation. These granule formulations were then compared with the other formulation where the clay was not modified with the help of parameters such as dissolution rate, dispersion stability and wetting time. The study reveals a very positive effect of clay modifications on granules in terms of above mentioned quality parameters.     

Study of the physicochemical properties of tulobuterol dry syrups using taste and smell sensors

The purpose of the present study was to evaluate the taste and smell of Tulobuterol Dry Syrup (TB-DS) in its original form (formulation A) and generic form (formulations B and C) by means of gustatory sensation tests and taste and smell sensors. In addition, the physicochemical properties of the syrups in a solid state were compared. Evaluation of sweetness with a powdered sample revealed significant differences between formulation A and formulation B and between formulation B and formulation C. In contrast, the results of principal component analysis (PCA) with a taste sensor revealed differences in principal component 1 (PC 1) among formulations A, B, and C. Smell sensor measurement of powdered samples revealed differences in products in terms of only PC 1, but these results were not related to the results of gustatory sensation testing with a smell sensor. Measurement of particle size distribution and scanning electron microscopy revealed differences in the particle diameter and particle surface shape for each product. Formulation B had the strongest absorption in the near-infrared spectrum, followed by formulation A and then formulation C. Accordingly, differences in preparations were presumably caused by variations in manufacturing specifications, such as types of additives and their content and coating methods used. In other words, the characteristics of each product were revealed by evaluation of their physical properties, sensing of taste and smell, and human gustatory sensation tests.     

HPLC analysis of juzen-taiho-to and its variant formulations and their antimetastatic efficacies.

Our previous study demonstrated that the oral administration of Juzen-taiho-to resulted in a significant inhibition of the liver metastasis of colon 26-L5 cells as compared with the untreated control, without side effects. We attempted to investigate the relationship between the HPLC pattern (referred to as the fingerprint) of the formulation and its component crude drugs and the inhibition of tumor metastasis in order to obtain the optimal efficacy and constant quality of the formulation. Two Juzen-taiho-to formulations (batches #1 and #2), which were individually prepared using the same 10 crude drugs and the same preparation procedure, showed similar anti-metastatic effects and absorbance patterns by HPLC analysis. Some variant formulations of Juzen-taiho-to, in which one crude drug was substituted with other crude drugs from different sources or places of origin, exhibited reduced efficacy as compared with the original formulation, as well as differences in the fingerprint pattern compared with the original formulation. Juzen (Naimo-Ogi-->Kibana-Ogi), a variant formulation with the substitution of Astragali radix of a different origin and place of harvest, showed significant inhibition of the liver metastasis of tumor cells and a HPLC fingerprint pattern similar to that of the original formulation. Thus, HPLC fingerprint analysis of Kampo medicines may provide a useful basis for obtaining their optimal efficacy as well as constant quality of the formulation, although it has some problems and limitations, such as detectability by and sensitivity to UV absorbance.     

Random sequential adsorption of line segments with a finite jamming limit

The traditional formulation for random sequential adsorption (RSA) of line segments onto a plane does not possess a jamming limit; there is always space for a 1D object on a 2D plane. We propose a qualitatively different RSA formulation for line segments which does lead to a finite jamming limit, 1.5707+/-0.0001 segments per square one segment on the side. To our knowledge, this is the first appearance of the number pi in the jamming limit of an RSA problem. This RSA formulation can be applied to adsorption of rigid, very high aspect ratio rods on a flat surface. These rods are not well modeled by the traditional RSA formulation. As an example of such a problem we describe the deposition of carbon nanotube-DNA hybrids on a surface and show that our theoretical formulation is consistent with experimental results.     

The Effects of Formulation on Imidacloprid Dissipation in Grapes and Vine Leaves and on Required Pre-Harvest Intervals under Lebanese Climatic Conditions

In this study, imidacloprid, a systemic insecticide, currently having a specified European Commission MRL value for vine leaves (2 mg kg⁻¹), was applied on a Lebanese vineyard under different commercial formulations: as a soluble liquid (SL) and water dispersible granules (WDG). In Lebanon, many commercial formulations of imidacloprid are subject to the same critical good agricultural practice (cGAP). It was, therefore, important to verify the variability in dissipation patterns according to matrix nature and formulation type. Random samplings of grapes and vine leaves were performed starting at 2 days until 18 days after treatment. Residue extractions were performed according to the QuEChERS method and the analytical determination using liquid chromatography coupled to tandem mass spectrometry (LC-MS-MS). The SL formulation yielded significantly higher initial deposit than the WDG formulation on grapes and vine leaves. The formulation type did not significantly affect the dissipation rates; the estimated half-lives in grapes and vine leaves were 0.5 days for all imidacloprid formulations. No pre-harvest intervals were necessary on grapes. PHIs of 3.7 days for the SL formulation and 2.8 days for the WDG formulation were estimated on vine leaves. The results showed that the type of formulation and the morphological and physiological characteristics of the matrix had an effect on the initial deposits, and thus residue levels, but not on the dissipation patterns.     

Predicting the suitability of microwave formulation using microwave differential thermal analysis (MWDTA)

Journal of Thermal Analysis and Calorimetry - Microwave-assisted formulation is becoming an established method of formulation in industry, providing a fast, economic and environmentally more...     

Microencapsulation Preservation of the Stability and Efficacy of Citrus Grandis Oil-Based Repellent Formulation against Aedes aegypti during Storage

Essential oils have been widely used as an active ingredient in mosquito repellent products. However, essential oils are highly unstable and prone to degradation when exposed to the environment during storage. Microencapsulation techniques help to maintain the stability of molecules in essential oils that are sensitive to environmental stress, and therefore improve shelf life. In this study, the physical stability and efficacy of a repellent formulation consisting of encapsulated Citrus grandis essential oil (CGEO) were evaluated under different storage conditions over a 12-month period by comparing the formulation with a non-encapsulated formulation. The formulations were both stored under two different storage conditions, i.e., 25 ± 2 °C/60% ± 5% relative humidity (RH) and 40 ± 2 °C/75% RH ± 5%, for 12 months. Droplet size, zeta potential, and pH value were measured after 1, 6, and 12 months of storage to determine their stability. For the study of efficacy, each formulation was tested against Aedes aegypti under laboratory conditions. We found that the microencapsulated formulation’s physical characteristics showed insignificant changes as compared with the non-encapsulated formulation during storage. The microencapsulated formulation demonstrated better repellent effects, sustaining high protection (>80%) for 4 more hours of exposure after 12 months of storage as compared with the non-encapsulated formulation that demonstrated high protection for only an hour post application. Microencapsulation helped to preserve the stability of the formulation, which resulted in high protection being maintained for over 12 months of storage.     

Novel computer optimization methodology for pharmaceutical formulations investigated by using sustained-release granules of indomethacin

A modified optimization technique, based on the response surface methodology, was developed for selecting pharmaceutical formulations. In general optimization methods, it is difficult to insure that the optimum formulation is strictly obtainable. Thus, the combined use of random number techniques and Andrews' plots with general optimization methods was investigated for seeking the optimum formulation. The method developed in this study was applied to the optimization of a sustained-release formulation based on the interpolymer complex of polyvinylpyrrolidone with carboxyvinyl polymer. Indomethacin was selected as a model drug for which sustained-release formulations are desirable. Experimental results obtained for the optimum formulation agreed well with the predictions, indicating the usefulness of this approach.     

Behaviour of fenitrothion residues in leaves and soil of vineyard after treatment with microencapsulate and emulsified formulations

The rate of decline of fenitrothion residues was investigated in leaves and soil of vineyard over 2 months after treatment with two different kinds of commercial formulations: emulsifiable concentrate (EC) and microencapsulate (ME). Fenitrothion residues were determined with GC-NPD after acetone extraction of soil and leaves. The measured initial deposits in soil and leaves varied between 2.6 and 3.8?mg?kg^?1 and between 89 and 101?mg?kg^?1, respectively. Fenitrothion residues in soil dropped at 0.1–0.2?mg?kg^?1 after 60 days following application with EC formulation showing a more rapid decline than the ME. Fenitrothion residues in leaves from ME formulation treatment showed a longer persistence and lower decline rate than those from EC formulation. During the experimental period, fenitrothion remaining in leaves from ME application was 10 times more than from the EC one. Mathematically defined decline curves were established by determining optimal relationships between fenitrothion residues and time. The RF1st-order and RF1.5th-order equation achieved the best adjustment to the experimental data of fenitrothion dissipation on leaves for the ME and EC formulation, respectively, giving fenitrothion half-lives of about 2–3 days for ME and <1 day for EC formulation. In vineyard soil, the best adjustment to the experimental data for ME and EC formulation was achieved by the 1st-order and 1.5th-order equations, respectively, giving fenitrothion half-lives in soil of about 17–21 days for ME and 5 days for EC formulation.     

Clays basal spacings effect on fire retardancy of polymers by TG/DTA

In this study, poly (ethylene-co-butyl acrylate, EBA-30) samples containing an intumescent formulation of ammonium polyphosphate and pentaerythritol and clays of different basal spacings had their flame retardant properties evaluated by thermogravimetric analysis, differential thermal analysis, and heating microscopy. Samples without polymeric matrix were also analyzed to observe possible interactions between the clays and the intumescent formulation. Thermal Analyses revealed that the basal spacings of the clays strongly influence their synergistic effect with the intumescent formulation studied.     

Suppression of the bitterness of enteral nutrients using increased particle sizes of branched-chain amino acids (BCAAs) and various flavours: a taste sensor study

An improved formulation of the enteral nutrient Aminoleban EN (Otsuka Pharmaceutical Co., Ltd., Tokyo, Japan), has been commercially available since Spring 2004. Like the previous formulation, the improved product contains branched-chain amino acids (BCAAs) L-isoleucine (L-Ile), L-leucine (L-Leu), and L-valine (L-Val), but the average particle size of these amino acids has been increased to 180 to 250 microm in the improved formulation, compared with 40 to 90 microm in the old product. The improved formulation has a significantly lower bitterness intensity score than the older formulation, as evaluated both in human gustatory tests and using the artificial taste sensor. We propose that this improved taste masking is due to the larger particle size of the BCAA crystals, due to which their release rates are reduced. The addition of improved flavours has also helped to reduce the bitterness of the improved Aminoleban EN formulation significantly. Analysis of the taste sensor data suggests that the sourness and sweetness of the added flavours were critical in diminishing the bitterness of Aminoleban EN.     

Effect of solvent composition on signal intensity in liquid chromatography-matrix-assisted laser desorption ionization experiments

The use of reversed phase liquid chromatography for the preparation of complex peptide mixtures for analysis by matrix assisted laser desorption ionization mass spectrometry has led to the observation of the critical importance of the matrix/analyte formulation in regards to the percent organic solvent in the mixture. This paper outlines the study using liquid chromatography to systematically vary the acetonitrile concentration in the formulation used for MALDI spot preparation to examine the impact the parameter has on analyte signal intensity. The results show that for five of six peptides tested across a wide mass range a formulation of approximately 75% acetonitrile is optimal for average MALDI signal intensity as determined on both time-of-flight and quadropole mass spectrometers. Examination of the individual spots shows that the organic solvent content in formulation significantly affects parameters such as crystal density and morphology.     

Evaluation of nanoherbal gel for anti-warts activity

In the present experimental investigation a novel nanoherbal gel containing iron nanoparticles and extract from Cuscuta reflexa was used as a drug. Synthesized nanoherbal increased the drug solubility and penetration in the skin and is useful as a novel delivery system for better anti-warts activity. The experimental work includes preformulation studies of drug (Cuscuta reflexa) which include organoleptic properties, identification and solubility studies. Spectroscopy characterization was performed for identification of drug. The iron nanoparticles were evaluated for their characteristic such as appearance, viscosity and odor. Various formulations F1–F5 was prepared using different formulation variables based on experiment design. The result showed that the formulation F-5 provide the better release using 5.5 pH acetate buffer and at 37 °C temperature for anti-warts activity. The maximum drug release through synthesized nanoherbal gel was found to be 91.3%. Nanoherbal formulation was evaluated for physical appearance, pH, consistency, spreadibility and drug content. Stability study of formulation F5 was carried out for a period of 3 months to determine the percentage release and the results revealed that the formulation is stable under varied humidity and temperature condition and there was no major change in the amount of drug release during the storage condition, which reflected the stability of F5 formulation.     

Investigation of leaching of an antifouling agent from marine paint formulations using radiotracer technique

A radiotracer technique was used to investigate the leaching of an antifouling agent from different marine paint formulations with an objective to select the best paint formulation for bulk production. The antifouling agent (Diuron) itself was labeled with carbon-14 (half-life: 5,730?years, ??-energy: 156?keV) and used as a radiotracer. The different paint formulations added with radiolabeled Diuron were applied onto suitably selected substrates and measured for initial intensity of ??-radiation using a Geiger-Muller detector connected to a ratemeter. The painted substrates were subjected to shower tests for a pre-decided time and subsequently measured for ??-radiations. The comparison of intensity of ??-radiations in substrates prior and post shower tests provides information about leaching of antifouling agent Diuron from the paint formulation. The high leaching percentage of antifouling agent Diuron post shower tests indicates non-suitability of paint formulation for marine and civil structures. However, low leaching rate of Diuron will make a paint formulation more efficient and suitable. Based on the results of investigation, a paint formulation with minimum leaching rate was identified and selected for bulk production by a paint company.