New method for90Sr determination in liquid samples

A method has been developed for measuring⁹⁰Sr activity in liquid samples. After concentrating strontium from the sample by coprecipitation with calcium phosphate, the residue is dissolved in 8N HNO₃ and passed through an extraction chromatographic column (Sr.Spec) containing a new material that selectively retains strontium. This is eluted from the column with 0.05N HNO₃ and counted by liquid scintillation. Measurement is performed using a double window method, that allows a rapid and single determination of⁹⁰Sr.     

Estimation of 90Sr in reprocessed uranium oxide samples

Summary A method has been developed for the estimation of ⁹⁰Sr in reprocessed uranium oxide samples obtained from the Purex processing of natural uranium spent fuel discharged from the research reactor. The method employs a combination of precipitation and solvent extraction procedure to eliminate other beta-impurities prior to resorting to the estimation of ⁹⁰Sr by beta-counting. ¹⁰⁶Ru was eliminated by volatalizing with perchloric acid, uranium was removed by carrier precipitation with strontium as sulphate. The sulphate precipitate was converted to carbonate and dissolved in nitric acid. ²³⁴Th and ²³⁴Pa were eliminated by synergistic solvent extraction using tri-n-butyl phosphate and thenoyl trifluoroacetone extractant mixture in xylene. An iron scavenging step was included to remove any residual impurities. Finally, strontium is precipitated as SrC₂O₄^. H₂O. The separated ⁹⁰Sr activity was followed to check the equilibrium growth of ⁹⁰Y.     

A simple radiochemical determination of90Sr in environmental samples

A simple procedure for the determination of⁹⁰Sr in environmental samples is described. The method uses the different solubilities of the oxalates of calcium and strontium in presence of a large excess of calcium. For this reason the method is especially suited for Ca-rich samples, as e.g., bones or soils. However, after addition of supplementary calcium it works equally well for other types of samples. The method was tested by analyzing the IAEA Certified Reference Materials soil, animal bone and algae.     

Rapid determination of 90Sr/90Y in water samples by liquid scintillation and Cherenkov counting

Strontium-90 (⁹⁰Sr) is a ubiquitous contaminant at nuclear facilities, found at high concentrations in spent nuclear fuel and radioactive waste. Due to its long half-life and ability to be transported in groundwater, an accurate method for measuring ⁹⁰Sr in water samples is critical to the monitoring program of any nuclear facility. To address this need, a rapid procedure for sequential separation of Sr/Y was developed and tested in groundwater samples collected from an area of riverbed affected by a ⁹⁰Sr groundwater plume. Sixteen samples, plus spike and water blanks, were analyzed. Five different measurements were performed to determine the ⁹⁰Sr and yttrium-90 (⁹⁰Y) activities in the samples: direct triple-to-double-coincidence ratio (TDCR) Cherenkov counting of ⁹⁰Y, liquid scintillation (LS) counting for ⁹⁰Sr following radiochemical separation, LS counting for ⁹⁰Y following radiochemical separation, Cherenkov counting for ⁹⁰Y following radiochemical separation and LS counting of the Sr samples for ⁹⁰Y in-growth. The counting was done using a low-level Hidex 300SL TDCR counter. Each measurement method was compared for accuracy, sensitivity and efficiency. The results following Cherenkov counting and radiochemical separation were in very good agreement with one another.     

Rapid method to determine 89/90Sr in steel samples

The sorption and diffusion behavior of cesium was studied to support the interpretation of the ongoing in-situ experiments in the Olkiluoto test site. The distribution coefficients of cesium in the Olkiluoto pegmatitic granite, veined gneiss and their main minerals were obtained by batch sorption experiments and the diffusion of cesium was studied in rock cubes. The results were modelled with PHREEQC and Comsol Multiphysics. The distribution coefficients of cesium were largest in biotite and veined gneiss. The effective diffusion coefficients of cesium from the diffusion model were 3 × 10⁻¹³ m² s⁻¹ for veined gneiss and 4 × 10⁻¹³ m² s⁻¹ for pegmatitic granite.

     

Determination of 90Sr in environmental samples using solid phase extraction chromatography

The p-tert-butyl calix[4]arene thiophenol derivative was successfully synthesized with reflux condition and was characterized by FT-IR and ¹H-NMR. This work mainly adopted the method of controlling variables. The results showed that the optimum pH value, temperature and extraction time were respectively 4.5, 25 °C and 90 min. By calculating the data of the enthalpy change and gibbs free energy, indicating that the process of reaction was an exothermic and spontaneous process, and it demonstrated a close agreement with pseudo-second-order kinetic model. It is also found that the coexisting cations on the extraction of uranium had greater influence.

     

Rapid column extraction method for actinides and 89/90Sr in water samples

Summary The SRS Environmental Laboratory analyzes water samples for environmental monitoring, including river water and ground water samples. A new, faster actinide and ^89/90Sr separation method has been developed and implemented to improve productivity, reduce labor costs and add capacity to this laboratory.This method uses stacked TEVA Resin^ò, TRU Resin^òand Sr-Resin^òcartridges from Eichrom Technologies (Darien, IL, USA) that allows the rapid separation of plutonium, neptunium, uranium, americium, curium and thorium using a single multi-stage column combined with alpha-spectrometry. By using vacuum box cartridge technology with rapid flow rates, sample preparation time is minimized. The method can be used for routine analysis or as a rapid method for emergency preparedness. Thorium and curium are often analyzed separately due to the interference of the daughter of ²²⁹Th tracer, actinium (²²⁵Ac) on curium isotopes when measured by alpha-spectrometry. This new method also adds a separation step using DGA Resin^ò, (diglycolamide resin, Eichrom Technologies) to remove ²²⁵Ac and allow the separation and analysis of thorium isotopes and curium isotopes at the same time.     

Preparation of animal tissue samples for the determination of90Sr and actinides

A unique procedure permitting the determination of⁹⁰Sr and actinides in the same protion of sample, with good chemical yields of all analytes, is presented. Animal tissue samples containing bone are ashed, spiked with^{2 3 2}U,^{2 4 2}Pu,^{2 4 3}Am and^{8 5}Sr and solubilized. The actinides and strontium are gathered and separated by a series of coprecipitations with, cerium hydroxide and cerium fluoride. Actinide separation and determination and purification and determination of⁹⁰Sr are accomplished by a combination of several well-known procedures. The laboratory method consistently results in high chemical yields of all the analytes and overcomes interferences from phosphates and calcium.     

Rapid and accurate determination of89/90Sr in radioactive samples by Cerenkov counting

An improved and rapid method for determination of⁹⁰Sr via its daughter nuclide,⁹⁰Y, in aqueous samples from the low-level radioactive wastes by Cerenkov counting was established. This technique is applicable to beta particles maximum energies greater than 0.263 MeV in aqueous solution. A comparison of⁹⁰Sr determination by Cerenkov counting and standard wet chemical separation techniques indicates a high degree of correlation and excellent agreement. For a 20 ml aqueous sample following the prescribed experimental conditions and a 60 min counting interval, the detection limit was 0.20 dpm/ml (0.10 pCi/ml), and the relative deviation is less then 5%.     

Rapid determination of 90Sr in urine samples using AnaLig® Sr-01

This paper describes the use of IBC’s AnaLig^® Sr-01 molecular recognition technology product to effectively and selectively pre-concentrate, separate, and recover strontium from urine samples. This method uses two-stage columns separation consisting of two different commercial products Eichrom’s Pre-filter Material and AnaLig^® Sr-01 column from IBC Advanced Technologies. This method does not involve co-precipitation of strontium as phosphates and oxalates from urine samples. The new rapid method separates strontium-90 with high chemical recovery.     

Measurement of (90)Sr in environmental samples by cation-exchange and liquid scintillation counting

A new method for the measurement of (90)Sr in environmental samples by cation-exchange and liquid scintillation counting is described. Strontium carbonate is purified by precipitation and ion-exchange, weighed for the determination of chemical yield, dissolved in hydrochloric acid and mixed with the liquid scintillator, Aquasol-2. Two channels of a low-background liquid scintillation counter are used to determine (90)Sr, (90)Y and (89)Sr, free from the effects of environmental tritium. The values of (90)Sr obtained by this method are in good agreement with those from ordinary (90)Y milking and the gas proportional counting method. The concentration of (90)Sr in the air at Tokai-mura in Japan has been measured by the new method.     

Time optimization of 90Sr determinations: sequential measurement of multiple samples during decay of 90Y

This work presents an optimized method for the determination of multiple samples containing ⁹⁰Sr when its daughter ⁹⁰Y is measured after chemical separation and in sequence, i.e. during its decay. Consequently the measurement times will increase for each subsequent sample, since there has been a longer time for decay before measurement. Compared to a previously published approach, when ⁹⁰Y is measured during its ingrowth, the gain in total analysis time (time for ingrowth+ summation of measurement times) is not that large, particularly not for low background instruments. However, results for a large part of the samples can be delivered earlier.

     

Application of neutron activation analysis in chemical yield determination for89Sr and90Sr separation of environmental samples

For⁸⁹Sr and⁹⁰Sr determination in grass samples neutron activation analysis was employed as an advantageous method for yield measurements during the separation process. From the activity ratio found conclusions on the source of radioactivity are possible taking into consideration the dependence on reactor operating time.     

An improved method FO the determination of90Sr in large samples of seawater

The determination of⁹⁰Sr in large sample of seawater by its daughter product⁹⁰Y by means of solvent extraction with bis-2-ethylhexyl-phosphoric acid (HDEHP) ini n-heptane leads to²³⁴Th contamination. Two methods are described by which the²³⁸U daughter product²³⁴Th is separated from the Y³⁺ samples, either by a cation exchanger procedure or by a co-recipitation with Zr₃(PO₄)₄.     

Studies on soil samples mineralization conditions preceding the determination of 90Sr

Some results of the extraction of strontium and yttrium from soil samples by concentrated nitric acid are described. The concentration of Sr and Y in the solid was determined by XRF method. The results obtained allowed to elaborate the conditions of acid leaching and to propose an analytical procedure for the determination of ⁹⁰Sr in samples without their total dissolution.     

The simple radiochemical determination of 90Sr in environmental solid samples by solvent extraction

Determination of ⁹⁰Sr in environmental solid samples is a challenging task because of the presence of so many other radionuclides in samples of interest. This problem was dealt with by radiochemical separation of strontium followed by yttrium separation and Cerenkov counting of the high-energy ??-particle emissions of ⁹⁰Y in order to quantitate ⁹⁰Sr. In this work, an improved method is described for the determination of ⁹⁰Sr in soil samples, through the separation of the daughter ⁹⁰Y at equilibrium. The procedure is based on the HDEHP solvent extraction in combination with liquid scintillation spectrometry (LSS). A low background Quantulus has been optimized for low level counting of Cerenkov radiation emitted by the hard ??-emitter ⁹⁰Y. The analytical quality of the method has been checked by analyzing IAEA Soil-375 reference materials. The analytical method has also been successfully applied to the determination of ⁹⁰Sr for moss-soil samples in inter-laboratory exercises through IAEA??s ALMERA network. The chemical recovery for ⁹⁰Y extraction ranged from 80 to 85% and the counting efficiency was 73% in the window 25?C400 keV.     

90Sr in lake sediments

For a better understanding of the behaviour of⁹⁰Sr in aquatic systems, this -emitter has been determined in the different layers of a lake sediment core which has been previously dated using the well established²¹⁰Pb dating method. For this, a radiochemical technique has been developed for the isolation of strontium from the sediment samples and for its activity measurement with a low-level gas-flow proportional counter. A conservative behaviour of⁹⁰Sr in the water column remaining dissolved in the water body, can be inferred from the data obtained. Consequently, a possible⁹⁰Sr transport pathway through the outflowing waters of the lake can be deduced.     

Analysis of90Sr in environmental and biological samples by extraction chromatography using a crown ether

The use of crown ethers is a simple and rapid method for the separation and determination of strontium in various samples. After sample dissolution oxalate precipitation was carried out to remove K. Chromatographic separation of strontium from most inactive and radioactive interference was done with a crown ether. The chemical recovery was determined gravimetrically. Radiostrontium was then determined by liquid scintillation counting.