Performance and mechanism for U(VI) adsorption in aqueous solutions with amino-modified UiO-66

Journal of Radioanalytical and Nuclear Chemistry - The adsorption performance and mechanism of the amino-modified zirconium-based metal organic framework (UiO-66-NH2) for the removal of U(VI) in...     

Preparation of Fe-loaded activated carbon and its adsorption property of U(VI) in aqueous solution

Three kinds of method were employed to prepare Fe loaded activated carbon (Fe-AC), liquid reduction method, carbonthermal method, incipient wetness method, respectively. Before and after adsorption, the adsorption property of Fe-AC had been analysed. Results indicated that the removal mechanisms were mainly redox reaction, adsorption and precipitation. In addition, the adsorption models fitted with the kinetic model and adsorption isotherm model. Based on the analysis of six influencing factors, we obtain some actual information to deal with the humic acid and the “back to acid”.     

Radiolysis of U(VI)-arsenazo-1 complex in aqueous solutions

The effect of absorbed dose on the decolouration of U(VI)-arsenazo-1 complex solutions has been investigated at pH 8.3. G-values were determined as a function of complex concentration as well as of OH, e _aq ^– scavengers. Using competition kinetics, rate constants were determined and the degradation mechanism discussed.     

Highly efficient removal of U(VI) in aqueous solutions by tea waste-derived biochar-supported iron-manganese oxide composite

Journal of Radioanalytical and Nuclear Chemistry - Uranium-containing wastewater poses a major threat to human health because of its toxicity and radioactivity. To address this issue, tea...     

Synthesis of magnetic chitosan/graphene oxide nanocomposites and its application for U(VI) adsorption from aqueous solution

Journal of Radioanalytical and Nuclear Chemistry - The performance of a magnetic chitosan/graphene oxide composites (MCGO) have been investigated for the adsorption processes of U(VI) ions from...     

Eco-friendly and low-cost amidoxime-functionalized microcrystalline cellulose/mesoporous silica composite for the selective adsorption of U(VI) from aqueous solution

Journal of Radioanalytical and Nuclear Chemistry - Eco-friendly and low-cost composite, amidoxime-functionalized microcrystalline cellulose/mesoporous silica (MCC/MS-AO), were synthesized by...     

Novel graphene oxide/bentonite composite for uranium(VI) adsorption from aqueous solution

A novel graphene oxide/bentonite composite (GO/bentonite) was synthesized and then characterized through powder X-ray diffraction, fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, and energy dispersive spectroscopy. Adsorption achieved equilibrium within 10 min. Moreover, U(VI) adsorption on GO/bentonite was highly dependent on solution pH and independent of ionic strength. These characteristics suggested that inner-sphere surface complexes of U(VI) formed on GO/bentonite. The adsorption of U(VI) from aqueous solution on GO/bentonite was fitted to the pseudo-second-order and Freundlich isotherm models. The maximum sorption capacity of GO/bentonite was 234.19 mg g^?1 under neutral pH at 303 K. GO/bentonite is a potentially powerful adsorbent for the efficient removal of U(VI) from aqueous solutions.     

Differential estimation of U(VI) and U(IV) ions in aqueous solutions by Arsenazo 1

The spectrophotometric determination of pure U(IV) or U(VI) ions in solution with Arsenazo I is greatly dependant on the pH of the solutions. The experimental conditions for the differential estimation of the different oxidation states of U ions, in the same sample, using Arsenazo I have been identified and implemented. The results showed that the applied method is rather rapid and accurate.     

Removal of uranium(VI) from aqueous solutions by nanoporous carbon and its chelating polymer composite

High surface area, ordered nanoporous carbon (CMK-3) and its chelating polymer composites were successfully prepared and utilized for the removal of U(VI) from aqueous solutions. Carboxymethylated polyethyleneimine (CMPEI) with a strong chelating property was introduced to the pore surface and inner pores of CMK-3 substrate. CMPEI-modified CMK-3 composite (CMPEI/CMK-3) was characterized by scanning electron microscopy and nitrogen sorption. U(VI) sorption capacity was significantly improved by the surface modification of CMK-3 by CMPEI. The CMPEI/CMK-3 showed enormously increased sorption capacities, compared with those of previous sorbents (e.g., surface-functionalized silicas). In particular, the CMPEI/CMK-3 showed a significantly high uranium retention property while allowing only about 1% U(VI) to leach out over a 4 month time period, when treated with polyacrylic acid.     

Kinetics and isothermal adsorption of U(VI) in aqueous solution by nano-Ni0

Journal of Radioanalytical and Nuclear Chemistry - The nanoscale zero-valent nickel (nano-Ni0) was prepared by liquid-phase reduction method and characterized by BET, XPS, FT-IR and XRD and be used...     

Equilibrium and kinetics study of Gd(III) and U(VI) adsorption from aqueous solutions by modified Sorrel’s cement

Modified Sorrel’s cement was prepared by the addition of ferric chloride. The modified cement (MF5) was analyzed and characterized by different methods. Adsorption of Gd(III) and U(VI) ions in carbonate solution has been studied separately as a function of pH, contact time, adsorbent weight, carbonate concentration, concentration of Gd(III) and U(VI) and temperature. From equilibrium data obtained, the values of Δ H, Δ S and Δ G were found to equal −30.9 kJ ⋅ mol⁻¹, −85.4 J ⋅ mol⁻¹ ⋅,K⁻¹, and −5.4 KJ ⋅ mol⁻¹, respectively, for Gd(III) and 18.9 kJ ⋅ mol⁻¹, 67.8 J ⋅ mol⁻¹ K⁻¹ and −1.3 KJ ⋅ mol⁻¹, respectively, for U(VI). The equilibrium data obtained have been found to fit both Langmuir and Freundlich adsorption isotherms. The batch kinetic of Gd(III) and U(VI) on modified Sorrel’s cement (MF5) with the thermodynamic parameters from carbonate solution were studied to explain the mechanistic aspects of the adsorption process. Several kinetic models were used to test the experimental rate data and to examine the controlling mechanism of the adsorption process. Various parameters such as effective diffusion coefficient and activation energy of activation were evaluated. The adsorption of Gd(III) and U(VI) on the MF5 adsorbent follows first-order reversible kinetics. The forward and backward constants for adsorption, k ₁and k ₂ have been calculated at different temperatures between 10 and 60^∘C. Form kinetic study, the values of Δ H ^* and Δ S ^* were calculated for Gd(III) and U(VI) at 25^∘C. It is found that Δ H ^* equals −14.8 kJmol⁻¹ and 7.2 kJmol⁻¹ for Gd(III) and U(VI), respectively, while Δ S ^* were found equal −95.7 Jmol⁻¹K⁻¹ and −70.5 Jmol⁻¹K⁻¹ for Gd(III) and U(VI), respectively. The study showed that the pore diffusion is the rate limiting for Gd(III) and (VI).     

Temperature and ionic strength influence on U(VI/V) and U(IV/III) redox potentials in aqueous acidic and carbonate solutions

Redox potentials: E(UO ₂ ²⁺ /UO ₂ ⁺ )=60±4 mV/NHE, E(U⁴⁺/U³⁺)=–630±4mV/NHE measured at 25°C in acidic medium (HClO₄ 1M) using cyclic voltametry are in accordance with the published data. From 5°C to 55°C the variations of the potentials of these systems (measured against Ag/AgCl electrode) are linear. The entropies are then constant: [S(UO ₂ ²⁺ /UO ₂ ⁺ )–S(Ag/AgCl)]/F=0±0.3 mV/°C, [S(U⁴⁺/U³⁺)–S(Ag/AgCl)]/F=1.5±0.3 mV/°C. From 5°C to 55°C, in carbonate medium (Na₂CO₃=0.2M), the Specific Ionic Interaction Theory can model the experimental results up to I=2M (Na⁺, ClO ₄ ^– , CO ₃ ^2– ): E(UO₂(CO₃) ₃ ^4– /UO₂(CO₃) ₃ ^5– )=–778±5 mv/NHE (I=0, T=25°C, (25°C)=(UO₂(CO₃) ₃ ^4– , Na⁺)–(UO₂(CO₃) ₃ ^5– , Na⁺)=0.92 kg/mole, S(UO₂(CO₃) ₃ ^4– /UO₂(CO₃) ₃ ^5– =–1.8±0.5 mV/°C (I=0), =(Cl^–, Na⁺)=(1.14–0.007T) kg/mole. The U(VI/V) potential shift, between carbonate and acidic media, is used to calculate (at I=0,25°C):

Removal of U(VI) from aqueous solutions by using attapulgite/iron oxide magnetic nanocomposites

The attapulgite/iron oxide magnetic nanocomposites were prepared by coprecipitation method and characterized by scanning electron microscopy, X-ray diffraction, vibrating sample magnetometer and Fourier transform infrared sorption spectroscopy. The results of characterization showed that iron oxides were successfully deposited on the surfaces of attapulgite. The prepared magnetic nanocomposites were applied to remove radionuclide U(VI) ions from aqueous solutions by using batch technique and magnetic separation method. The results showed that the sorption of U(VI) on attapulgite/iron oxide magnetic composites was strongly dependent on ionic strength and pH at low pH values, and was independent of ionic strength at high pH values. The interaction of U(VI) with the magnetic nanocomposites was mainly dominated by outer-sphere surface complexation or ion exchange at low pH values, and was controlled by inner-sphere surface complexation or multinuclear surface complexation at high pH values. With increasing temperature, the sorption of U(VI) on attapulgite/iron oxide magnetic composites increased and the thermodynamic parameters calculated from the temperature dependent sorption isotherms suggested that the sorption of U(VI) on the magnetic nanocomposites was a spontaneous and endothermic process. The high sorption capacity and easy magnetic separation of the attapulgite/iron oxide magnetic composites make the material as suitable sorbent in nuclear waste management.     

Poly(amidoxime) functionalized MoS2 for efficient adsorption of uranium(VI) in aqueous solutions

Journal of Radioanalytical and Nuclear Chemistry - A novel adsorbent for enrichment of trace uranium (U(VI)) ions in aqueous solution is designed based on the excellent adsorption capacity of...     

Polyaniline/oxidation etching graphitic carbon nitride composites for U(VI) removal from aqueous solutions

Journal of Radioanalytical and Nuclear Chemistry - Polyaniline/oxidation etching g-C3N4 composites (PANI/OCN) were synthesized through an oxidative polymerization method and applied to remove...     

Phosphorylation of graphehe oxide to improve adsorption of U(VI) from aquaeous solutions

Journal of Radioanalytical and Nuclear Chemistry - The graphene oxide (GO) was functionalized with phosphate groups and applied as an effective adsorbent for the removal of uranium from aqueous...     

Behaviour of the thiodipropionic complex of In(III) and U(VI) at the DME in aqueous and aqueous methanolic solutions

The complexation of In(III) and U(VI) with thiodipropionic acid has been investigated polarographically in water and water-methanol solutions at 30 +/- 0.1 degrees . All the chelates belong to polaro-graphically reversible systems. With indium(III), complexes with metal to ligand ratios of 1:1, 1:2, 1:3 and 1:4 are found at pH 4.8. Uranium(VI) is found to form three successive complexes with metal to ligand ratios of 1:1,1:2 and 1:3 in 0.1M HCl, with 0.1M KCl as supporting electrolyte.     

Preconcentration of U(VI) ions on few-layered graphene oxide nanosheets from aqueous solutions

Graphene oxide nanosheets have attracted multidisciplinary attention due to their unique physicochemical properties. Herein, few-layered graphene oxide nanosheets were synthesized from graphite using a modified Hummers method and were characterized by TEM, AFM, Raman spectroscopy, XPS, FTIR spectroscopy, TG-DTA and acid-base titrations. The prepared few-layered graphene oxide nanosheets were used as adsorbents for the preconcentration of U(VI) ions from large volumes of aqueous solutions as a function of pH, ionic strength and temperature. The sorption of U(VI) ions on the graphene oxide nanosheets was strongly dependent on pH and independent of the ionic strength, indicating that the sorption was mainly dominated by inner-sphere surface complexation rather than by outer-sphere surface complexation or ion exchange. The abundant oxygen-containing functional groups on the surfaces of the graphene oxide nanosheets played an important role in U(VI) sorption. The sorption of U(VI) on graphene oxide nanosheets increased with an increase in temperature and the thermodynamic parameters calculated from the temperature-dependent sorption isotherms suggested that the sorption of U(vi) on graphene oxide nanosheets was an endothermic and spontaneous process. The maximum sorption capacities (Q(max)) of U(VI) at pH 5.0 ± 0.1 and T = 20 °C was 97.5 mg g(-1), which was much higher than any of the currently reported nanomaterials. The graphene oxide nanosheets may be suitable materials for the removal and preconcentration of U(VI) ions from large volumes of aqueous solutions, for example, U(VI) polluted wastewater, if they can be synthesized in a cost-effective manner on a large scale in the future.     

Removal of U(VI) from aqueous solutions by using MWCNTs and chitosan modified MWCNTs

In this paper, the multiwalled carbon nanotubes (MWCNTs) were modified with chitosan (CS) by using low temperature plasma grafting technique (denoted as MWCNT-CS). The prepared MWCNTs and MWCNT-CS were characterized by SEM, TEM, FTIR and Raman spectroscopy in detail and the results suggested that CS molecules were successfully grafted on the surfaces of MWCNTs. The materials were applied as adsorbents in the removal of U(VI) ions from large volumes of aqueous solutions as a function of environmental conditions. The removal of U(VI) from aqueous solution to MWCNTs and MWCNT-CS increased with increasing pH values at pH < 7, and then decreased with increasing pH values at pH > 7. The sorption of U(VI) on MWCNTs and MWCNT-CS was strongly dependent on pH and independent of ionic strength. The sorption of U(VI) on MWCNTs and MWCNT-CS was dominated by inner-sphere surface complexation rather than by ion exchange or outer-sphere surface complexation. The surface grafted chitosan molecules can enhances U(VI) sorption on MWCNTs obviously, which was also evidenced from the XPS spectroscopy analysis. The results of high sorption capacity of U(VI) on MWCNT-CS suggest that the MWCNT-CS nanomaterial is a suitable candidate in the preconcentration of U(VI) ions from large volumes of aqueous solutions.