Estimation of oxyhydroxide specific surface area using the amounts of OH groups adsorbed

A procedure for pH-metric determination of the limiting adsorption of OH groups (A _OH) by Fe^III, Zr^IV, Cr^III, and In^III oxyhydroxide hydrogels from 0.1 and 1.0 M solutions of NaCl is described. Data on the molecular area occupied by a single OH group on the hydrogel surface (S _OH) and the S _spec values, which were calculated from A _OH and S _OH, are presented. The S _spec value does not depend on the pH of hydrogel precipitation; the true S _spec value can be determined only from sorption of the OH groups at the actual point of zero charge of the hydrogel. The A _OH values for hydrogels were found to change only slightly during aging of hydrogels in electrolyte solutions.     

Simulation of a monolayer adsorbed on a heterogeneous surface: effect of the size and shape of the adsorbate on the structure of the interface and the distribution of the adsorption energies

At the low temperature limit, the effect on the size and shape factors of the adsorbate molecule is shown in a simulation of a monomolecular phase adsorbed on a heterogeneous surface. This factor is reflected both in the theoretical distribution of the adsorption energies and the packing of the adsorbed phase.     

Effects of adsorbate interactions on the product distribution in Fischer-Tropsch synthesis

Analytic expressions are derived for the molar and mass distributions for Fischer-Tropsch products on the basis of the generally accepted scheme for the mechanism as supplemented with recombination stages for the adsorbed carbon-bearing species.Translated from Teoreticheskaya i Ékperimental'naya Khimiya, Vol. 25, No. 1, pp. 96–99, January–February, 1989.     

Kinetic determination of ultramicro amounts of copper

A new catalytic reaction is proposed and a kinetic method developed for the determination of ultramicro amounts of Cu(II) on the basis of its catalytic activity in oxidation of the 2-thiosemicarbazone of sodium 1,2-naphthoquinone-4-sulphonate by hydrogen peroxide in the presence of ascorbic acid. Under optimal conditions the sensitivity of the method is 0.25 ng/ml. The relative error is 4.8-18.2% for the concentration range 5-0.8 ng/ml. Most foreign ions do not change the rate of the catalysed reaction. Co(2+) and I(-) catalyse the reaction, Ni(2+) extensively inhibits it, and in the presence of EDTA only the uncatalysed reaction takes place.     

Adsorption of nonionic surfactants on cellulose surfaces: adsorbed amounts and kinetics

Kinetic and equilibrium aspects of three different poly(ethylene oxide) alkylethers (C12E5, C12E7, C14E7) near a flat cellulose surface are studied. The equilibrium adsorption isotherms look very similar for these surfactants, each showing three different regions with increasing surfactant concentration. At low surfactant content both the headgroup and the tail contribute to the adsorption. At higher surface concentrations, lateral attraction becomes prominent and leads to the formation of aggregates on the surface. The general shape of the isotherms and the magnitude of the adsorption resemble mostly those for hydrophilic surfaces, but both the ethylene oxide and the aliphatic segments determine affinity for the surface. The adsorption and desorption kinetics are strongly dependent on surfactant composition. At bulk concentrations below the CMC, the initial adsorption rate is attachment-controlled. Above the CMC, the micellar diffusion coefficient and the micellar dissociation rate play a crucial role. For the most hydrophilic surfactant, C12E7, both parameters are relatively large. In this case, the initial adsorption rate increases with increasing surfactant concentration, also above the CMC. For C12E5 and C14E7 there is no micellar contribution to the initial adsorption rate. The initial desorption kinetics are governed by monomer detachment from the surface aggregates. The desorption rate constants scale with the CMC, indicating an analogy between the surface aggregates and those formed in solution.     

Influence of adsorbed polymers on the removal of mineral particles from a planar surface

 Experimental results on the role of adsorbed polymers on the particle adhesion are presented. Both Brownian (silica particles) and non-Brownian (glass beads) particles were used. The particles were deposited onto the internal surface of a glass parallelepiped cell, and then submitted to increasing laminar flow rates. The pH and the ionic strength of the electrolytes were fixed. The adhesive force was related to the hydrodynamic force required to dislodge 50% of the initially attached beads. We found that high molecular weight PEO had little effect on the adhesion of small silica beads due to the low affinity of the polymer for silica or glass surfaces. On the contrary, PEO greatly enhanced the adhesion of bigger glass beads forced to deposit on the capillary surface because of gravity. The increase was all the more pronounced as the molecular weight of the polymer was high. The effect of high molecular weight cationic copolymers on the adhesion of silica particles was drastic. The maximal force (1500 pN) applied by the device could not enable any particle detachment even using polymers of low cationicity rate (5%), showing the efficiency of electrostatic attractions. When copolymers were adsorbed on both surfaces (particles and plane), the adhesive force exhibited a maximum at intermediate coverage of particles. This optimum was related to the optimum flocculation concentration classically observed in flocculation of suspensions by polymers. Received: 16 February 1996 Accepted: 10 September 1996     

靛蓝胭脂红-溴酸钾体系催化光度法测定微量碘

研究了在室温及0．4mol/L H2SO4介质中碘离子对KBrO3氧化靛蓝胭脂红褪色反应的催化作用,建立了一种测定微量碘的新方法。碘离子浓度在0．20－2．0μg/mL范围内与△A呈线性关系,检测限为0．14μg/mL。多数常见离子无干扰。可用于海带中微量碘的测定。     

Kinetic spectrophotometric determination of nanogram amounts of cyanide

A sensitive kinetic method for determination of nanogram amounts of cyanide is reported. It is based on the measurement of the induction period imposed by cyanide on the copper(II)-catalysed oxidation of 3-hydroxybenzaldehyde azine (3-OHBAA) by potassium peroxydisulphate. Kinetic data are recorded spectrophotometrically at 465 nm, the maximum absorption wavelength of the oxidation product of 3-OHBAA. From the kinetic study and other experimental tests it may be concluded that the cyanide ion undergoes copper(II)-catalysed oxidation during the induction period. The calibration plot is linear in the range 150-600 ng/ml cyanide and the detection limit is 50 ng/ml. The precision of the method, expressed as the relative standard deviation, is 3.2% for 350 ng/ml cyanide. Good recoveries are obtained in applying the method to analysis for cyanide in water samples.     

Arg–Cys and Arg–cysteamine adsorbed on gold and the G-protein–adsorbate interaction

The dipeptide, Arg–Cys, and the related molecule, Arg–cysteamine, are adsorbed to gold surfaces and the monolayers are characterized. Chemical binding and electronic structure of the monolayers are obtained by X-ray photoelectron spectroscopy (XPS). Strong molecular binding of the adsorbates to gold surface through the sulfur atom is attained. Orientation of the adsorbates on gold is studied using infrared reflection absorption spectroscopy (IRAS). Arg–Cys is interpreted to be adsorbed on gold in a compact configuration. The Arg–cysteamine molecule is adsorbed on gold with the main molecular axis perpendicular to the surface. Interaction of G-protein with the adsorbates was studied using the surface plasmon resonance (SPR) technique. It is believed that arginine has a major role in G-protein recognition since the G-protein-coupled receptor (GPCR) ₂A has an arginine-rich region in the G-protein-binding part of the third intracellular loop.     

Dimer-induced stabilization of H adsorbate cluster on BN(0001) surface

Using first-principles calculations, we have studied successive adsorption of hydrogen atoms on a sp(2)-bonded boron nitride graphitic sheet. Our calculations show that clustering proceeds through the creation of contiguous H-H orthodimer structures stabilizing the H adsorbate cluster on the BN(0001) surface, leading eventually to the formation of hydrogen-contiguous boat-shaped quartets.     

Graft polymerization from a silica surface initiated by adsorbed peroxide macroinitiators. I. Adsorption and structure of the adsorbed layer of peroxide macroinitiators on a silica surface

The adsorption features of two peroxide macroinitiators (PMIs) with various functionalities from their semi-dilute solutions on the silica surface were thoroughly investigated in the present work. These investigations include the study of the adsorption kinetics of PMI in diverse solvents and a detailed examination of the adsorbed layer structure with the aid of ellipsometry, scanning force microscopy (SFM), and contact angle measurements. Rearrangements of PMI macromolecules at the solid surface are supposed to be the main reason for the appearance of extremes on the kinetic curves and, besides, have a more pronounceable effect on adsorption rate than their diffusion rate to the surface even at the initial stage of the process. Both island-like and densely packed structures of absorbed layers were revealed by combining contact angle measurements and SFM. Surprisingly, even in the case when saturation of the adsorbed layer is reached, PMI does not completely occupy the substrate surface which is at least particularly reachable for the wetting liquids. PMIs adsorbed at the solid surface are intended for the formation of tethered polymer "brushes" via the initiation of "grafting from" polymerization.     

Kinetic determination of trace amounts of thiosulfate based on its inhibitory effect

The sulfur containing ligand viz., thiosulfate is found to inhibit the Ag(I) catalyzed substitution of cyanide in hexacyanoferrate(II) by phenylhydrazine. The inhibitory effect of thiosulfate is attributed due to its tendency to form complexes with Ag(I), leading to the production of inhibitor-catalyst complexes. The reactions, followed spectrophotometrically in aqueous medium at 488 nm, was possible by the increase in absorbance of the cherry-red product, [Fe(CN)₅PhNHNH₂]^3- at pH 2.8 (±0.02), at 30 (±0.1) °C, and an ionic strength (μ) of 0.02 M (KNO₃). The linear calibration curves were obtained using the absorbance measured at different times (A_t) and thiosulfate concentrations under specified conditions. The calculated detection limit was 4.9 × 10^-7 M. The Michaelis-Menten constant (K_m) and equilibrium constants for the formation of complexes between catalyst and inhibitor (K_CI), and the catalyst and substrate (K_S) were computed from the kinetic data. A general mechanistic scheme is proposed for this reaction.     

The states of hydrogen adsorbed on the surface of skeleton nickel

The experimental data on hydrogen adsorption on skeleton nickel were used to construct the pK spectrum of atomic hydrogen on this surface. The pK spectrum obtained corresponded to the presence of three adsorption centers on the surface of skeleton nickel. A chemical model of hydrogen adsorption on the surface of skeleton nickel was suggested.     

Kinetic determination of ultramicro amounts of Sn(II)

Summary A kinetic method is suggested for determining traces of Sn(II), on the basis of their inhibiting effect on the Fe(III) catalysis of oxidation of 4-amino-N, N-diethylaniline sulphate by hydrogen peroxide. The sensitivity of the method is 10 ng/ml. The error is below 11% and the method has relatively good selectivity.

---

Kinetische Bestimmung von Ultramikromengen Sn(II)

Zusammenfassung Auf der Grundlage des Hinderungseffektes auf die durch Fe(III) katalysierte Oxydation von 4-Amino-N, N-diethylanilinsulfat durch Wasserstoffperoxid wurde eine kinetische Methode zur Bestimmung von Sn(II)-Spuren vorgeschlagen. Deren Empfindlichkeit beträgt 10 ng/ml. Der Fehler liegt unter 11%, ihre Selektivität ist verhältnismäßig gut.

     

Kinetic spectrophotometric determination of trace amounts of selenium and vanadium

A sensitive kinetic spectrophotometric method has been developed for the determination of Se(IV) over the range of 45 to 4000 ng in 10 mL of solution. The method is based on the catalytic effect of Se(IV) on the reduction reaction of bromate by hydrazinium dichloride, with subsequent reaction of Ponceau S with products of the above reaction (chlorine and bromine), causing color changing of Ponceau S. Method development includes optimization of time interval for measurement of slope, pH, reagents concentration, and temperature. The optimized conditions yielded a theoretical detection limit of 33 ng/?10 mL of solution of Se(IV). The interfering effects were studied and removed. The method was applied to the determination of selenium in spiked water, Kjeldahl tablet, selenium tablet, and shampoo. Vanadium(V) has an inhibition effect on the catalyzed reaction of bromate and hydrazine by selenium. Using this effect, V(V) can be determined in the range of 70 to 2500 ng in 10 mL of solution. The optimization procedure includes pH and selenium concentration. An extraction method was used for interference removal. The method was applied to the determination of vanadium in petroleum. Received: 20 October 1998 / Revised: 17 April 1999 / Accepted: 3 June 1999     

Kinetic spectrophotometric determination of trace amounts of selenium and vanadium

A sensitive kinetic spectrophotometric method has been developed for the determination of Se(IV) over the range of 45 to 4000 ng in 10 mL of solution. The method is based on the catalytic effect of Se(IV) on the reduction reaction of bromate by hydrazinium dichloride, with subsequent reaction of Ponceau S with products of the above reaction (chlorine and bromine), causing color changing of Ponceau S. Method development includes optimization of time interval for measurement of slope, pH, reagents concentration, and temperature. The optimized conditions yielded a theoretical detection limit of 33 ng/¶10 mL of solution of Se(IV). The interfering effects were studied and removed. The method was applied to the determination of selenium in spiked water, Kjeldahl tablet, selenium tablet, and shampoo. Vanadium(V) has an inhibition effect on the catalyzed reaction of bromate and hydrazine by selenium. Using this effect, V(V) can be determined in the range of 70 to 2500 ng in 10 mL of solution. The optimization procedure includes pH and selenium concentration. An extraction method was used for interference removal. The method was applied to the determination of vanadium in petroleum.     

Kinetic modeling of the adsorption rate of a gaseous adsorbate on a granular adsorbent by ultra-rapid-scanning Fourier transform infrared spectrometry

A novel method for determining the rates of adsorption of gaseous adsorbates on granular adsorbents in the millisecond time regime is described. Mixtures of the adsorbate and nitrogen are passed through a solenoid valve and 100 mg of the adsorbent for periods of (typically) 100 ms. The concentration of the adsorbate passing into a low-volume, long path length gas cell is measured with an ultra-rapid-scanning Fourier transform infrared spectrometer capable of gathering 200 mid-infrared spectra per second with 6-cm(-1) resolution. The pressure of the gas entering the cell is measured simultaneously with a capacitance manometer. A dynamic mathematical model was developed to analyze and describe the results in terms of a Langmuir isotherm. The success of this approach is demonstrated by the estimation of the rate of adsorption of vapor-phase acetaldehyde on aminopropylsilylated granular silica gel.