Theoretical study of hydrogen bonded clusters of water and cyanic acid: Hydrogen bonding in terms of the molecular structure

Ab initio and density functional calculations were used to analyze the interaction between a molecule of cyanic acid (HOCN) and up to 4 molecules of water at the B3LYP/6-311++G(d,p) and MP2/6-311++G(d,p) computational levels. The cooperative effect (CE) is increased with the increasing size of the studied clusters. Red shifts of the H–O stretching frequency for complexes involving HOCN as an H-donor were predicted. The strength of the hydrogen bonds in terms of molecular structures could be deduced from a comparison of HOCN–H₂O with HCNO–H₂O, HONC–H₂O and HNCO–H₂O HB clusters. The atom in molecules (AIM) method was used to analyze the cooperative effects on topological parameters.     

Hydrogen peroxide clusters: the role of open book motif in cage and helical structures

Hartree-Fock (HF) calculations using 6-31G*, 6-311++G(d,p), aug-cc-pVDZ, and aug-cc-pVTZ basis sets show that hydrogen peroxide molecular clusters tend to form hydrogen-bonded cyclic and cage structures along the lines expected of a molecule which can act as a proton donor as well as an acceptor. These results are reiterated by density functional theoretic (DFT) calculations with B3LYP parametrization and also by second-order M?ller-Plesset perturbation (MP2) theory using 6-31G* and 6-311++G(d,p) basis sets. Trends in stabilization energies and geometrical parameters obtained at the HF level using 6-311++G(d,p), aug-cc-pVDZ, and aug-cc-pVTZ basis sets are similar to those obtained from HF/6-31G* calculation. In addition, the HF calculations suggest the formation of stable helical structures for larger clusters, provided the neighbors form an open book structure.     

Coordination of methanol clusters to benzene: a computational study

Benzene-methanol cluster structures were investigated with theoretical chemistry methods to describe the microsolvation of benzene and the benzene-methanol azeotrope. Benzene-methanol (MeOH) clusters containing up to six methanol molecules have been calculated by ab initio [MP2/6-311++G(d,p)//MP2/6-31+G(d,p) + BSSE correction] method. The BSSE was found quite large with this basis set, hence, different extrapolation schemes in combination with the aug-cc-pVxZ basis sets have been used to estimate the complete basis set limit of the MP2 interaction energy [ΔE(MP2/CBS)]. For smaller clusters, n ≤ 3, DFT procedures (DFTB+, MPWB1K, M06-2X) have also been applied. Geometries obtained for these clusters by M06-2X and MP2 calculations are quite similar. Based on the MP2/CBS results, the most stable C(6)H(6)(MeOH)(3) cluster is characterized by a hydrogen bonded MeOH trimer chain interacting with benzene via π···H-O and O···H-C(benzene) hydrogen bonds. Larger benzene-MeOH clusters with n ≥ 4 consist of cyclic (MeOH)(n) subclusters interacting with benzene by dispersive forces, to be denoted by C(6)H(6) + (MeOH)(n). Interaction energies and cooperativity effects are discussed in comparison with methanol clusters. Besides MP2/CBS calculations, for selected larger clusters the M06-2X/6-311++G(d,p)//M06-2X/6-31+G(d,p) procedure including the BSSE correction was also used. Interaction energies obtained thereby are usually close to the MP2/CBS limit. To model the benzene-MeOH azeotrope, several structures for (C(6)H(6))(2)(MeOH)(3) clusters have been calculated. The most stable structures contain a tilted T-shaped benzene dimer interacting by π···H-O and O···H-C (benzene) hydrogen bonds with a (MeOH)(3) chain. A slightly less negative interaction energy results for a parallel displaced benzene sandwich dimer with a (MeOH)(3) chain atop of one of the benzene molecules.     

NMR spectra, GIAO and charge density calculations of five-membered aromatic heterocycles

The B3LYP/6-31+G(d) molecular geometry optimized structures of 17 five-membered heterocycles were employed together with the gauge including atomic orbitals (GIAO) density functional theory (DFT) method at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p) and B3LYP/6-311+G(2d,p) levels of theory for the calculation of proton and carbon chemicals shifts and coupling constants. The method of geometry optimization for pyrrole (1), N-methylpyrrole (2) and thiophene (7) using the larger 6-311++G(d,p) basis sets at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p), B3LYP/6-31+G(2d,p) and B3LYP/cc-pVTZ levels of theory gave little difference between calculated and experimental values of coupling constants. In general, the (1)H and 13C chemical shifts for all compounds are in good agreement with theoretical calculations using the smaller 6-31 basis set. The values of nJHH(n=3, 4, 5) and rmnJ(CH)(n=1, 2, 3, 4) were predicted well using the larger 6-31+G(d,p) and 6-311++G(d,p) basis sets and at the B3LYP/6-31+G(d,p), B3LYP/6-311++G(d,p), B3LYP/6-31+G(2d,2p) levels of theory. The computed atomic charges [Mülliken; Natural Bond Orbital Analysis (NBO); Merz-Kollman (MK); CHELP and CHELPG] for the B3LYP/6-311++G(d,p) geometry optimized structures of 1-17 were used to explore correlations with the experimental proton and carbon chemical shifts.     

乙醇-水分子团簇C2H5OH(H2O)n (n=1-9)稳定结构的量子化学研究

采用密度泛函理论B3LYP方法, 在B3LYP/6-311++G(2d,2p)//B3LYP/6-311++G(d,p)基组水平上对乙醇-水分子团簇(C₂H₅OH(H₂O)_n (n=1-9))的各种性质进行研究, 如: 优化的几何构型、结构参数、氢键、结合能、平均氢键强度、自然键轨道(NBO)电荷分布、团簇的生长规律等. 结果表明, 从二维(2-D)环状结构到三维(3-D)笼状结构的过渡出现在n=5的乙醇-水分子团簇中. 此外, 利用团簇结合能的二阶差分、形成能、能隙等性质, 发现在n=6时乙醇-水分子团簇的最低能量结构稳定性较好, 可能为幻数结构. 最后, 为了进一步探讨氢键本质, 将C₂H₅OH(H₂O)_n (n=2-9)最低能量结构的各种性质与纯水分子团簇(H₂O)_n (n=3-10)比较, 结果表明前者与后者中的水分子之间氢键相似.     

Solvation of copper ions by acetone. structures and sequential binding energies of Cu+(acetone)x,x = 1-4 from collision-induced dissociation and theoretical studies

Collision-induced dissociation of Cu+(acetone)(x), x = 1-4, with Xe is studied as a function of kinetic energy using guided ion beam mass spectrometry. In all cases, the primary and lowest energy dissociation channel observed is endothermic loss of one acetone molecule. The primary cross section thresholds are interpreted to yield 0 and 298 K bond energies after accounting for the effects of multiple ion-neutral collisions, internal energy of the complexes, and dissociation lifetimes. Density functional calculations at the B3LYP/6-31G* level of theory are used to determine the structures of these complexes and provide molecular constants necessary for the thermodynamic analysis of the experimental data. Theoretical bond dissociation energies are determined from single point calculations at the B3LYP/6-311+G(2d,2p) and MP2(full)/6-311+G(2d,2p) levels, using the B3LYP/6-31G* optimized geometries. The experimental bond energies determined here are in good agreement with previous experimental measurements made in a high-pressure mass spectrometer for the sum of the first and second bond energy (i.e., Cu+(acetone)2 --> Cu+ + 2 acetone) when these results are properly anchored. The agreement between theory and experiment is reasonable in all cases, but varies both with the size of the cluster and the level of theory employed. B3LYP does an excellent job for the x = 1 and 3 clusters, but is systematically low for the x = 2 and 4 clusters such that the overall trends in sequential binding energies are not parallel. In contrast, all MP2 values are somewhat low, but the overall trends parallel the measured values for all clusters. The trends in the measured Cu+(acetone), binding energies are explained in terms of 4s-3d sigma hybridization effects and ligand-ligand repulsion in the clusters.     

Theoretical study of the conformational energy hypersurface of cyclotrisarcosyl

The multidimensional Conformational Potential Energy Hypersurface (PEHS) of cyclotrisarcosyl was comprehensively investigated at the DFT (B3LYP/6-31G(d), B3LYP/6-31G(d,p) and B3LYP/6-311++G(d,p)), levels of theory. The equilibrium structures, their relative stability, and the Transition State (TS) structures involved in the conformational interconversion pathways were analyzed. Aug-cc-pVTZ//B3LYP/6-311++G(d,p) and MP2/6-31G(d)//B3LYP/6-311++G(d,p) single point calculations predict a symmetric cis-cis-cis crown conformation as the energetically preferred form for this compound, which is in agreement with the experimental data. The conformational interconversion between the global minimum and the twist form requires 20.88 kcal mol-1 at the MP2/6-31G(d)//B3LYP/6-311++G(d,p) level of theory. Our results allow us to form a concise idea about the internal intricacies of the PEHSs of this cyclic tripeptide, describing the conformations as well as the conformational interconversion processes in this hypersurface. In addition, a comparative analysis between the conformational behaviors of cyclotrisarcosyl with that previously reported for cyclotriglycine was carried out     

Theoretical study and atoms in molecule analysis of hydrogen bonded clusters of ammonia and isocyanic acid

Abstract  

Ab initio and density functional calculations were used to analyze the interaction between a molecule of the isocyanic acid with 1 up to 4 molecules of ammonia at the B3LYP/6-311++G(d,p) and MP2/6-311++G(d,p) computational levels. The cooperative effect is increased with the increasing size of studied clusters. Red shifts of the H–N stretching frequency for complexes involving the isocyanic acid as an H-donor were predicted. Atom in molecules was used to analyze cooperative effects on topological parameters.     

Conformationally averaged vertical detachment energy of finite size NO3(-)·nH2O clusters: a route connecting few to many

We report conformationally averaged VDEs (VDE(w)(n)) for different sizes of NO(3)(-)·nH(2)O clusters calculated by using uncorrelated HF, correlated hybrid density functional (B3LYP, BHHLYP) and correlated ab intio (MP2 and CCSD(T)) theory. It is observed that the VDE(w)(n) at the B3LYP/6-311++G(d,p), B3LYP/Aug-cc-Pvtz and CCSD(T)/6-311++G(d,p) levels is very close to the experimentally measured VDE. It is shown that the use of calculated results of the conformationally averaged VDE for small-sized solvated negatively-charged clusters and a microscopic theory-based general expression for the same provides a route to obtain the VDE for a wide range of cluster sizes, including bulk.     

Theoretical studies on dynamics and thermochemistry of the reactions CF(3)CHCl(2)+Cl-->CF(3)CCl(2)+HCl and CF(3)CHFCl+Cl-->CF(3)CFCl+HCl

A dual-level direct dynamics study has been carried out for the two hydrogen abstraction reactions CF(3)CHCl(2)+Cl and CF(3)CHFCl+Cl. The geometries and frequencies of the stationary points are optimized at the BHLYP/6-311G(d,p), B3LYP/6-311G(d,p), and MP2/6-31G(d) levels, respectively, with single-point calculations for energy at the BHLYP/6-311++G(3df,2p), G3(MP2), and QCISD(T)/6-311G(d,p) levels. The enthalpies of formation for the species CF(3)CHCl(2), CF(3)CHFCl, CF(3)CCl(2), and CF(3)CFCl are evaluated at higher levels. With the information of the potential energy surface at BHLYP/6-311++G(3df,2p)//6-311G(d,p) level, we employ canonical variational transition-state theory with small-curvature tunneling correction to calculate the rate constants. The agreement between theoretical and experimental rate constants is good in the measured temperature range 276-382 K. The effect of fluorine substitution on reactivity of the C-H bond is discussed.     

A DFT study of uracil and 5-bromouracil in nanodroplets

The canonical (keto) and rare (enol) tautomers of uracil and 5-bromouracil in clusters comprising 50 and 100 water molecules (nanodroplets) were studied using density functional theory. The geometries of the various complexes were optimized at two different levels of theory, BLYP/6-31G(d,p) and B3LYP/6-31G(d,p). Tautomerization energies were computed using the BLYP, B3LYP and M05-2X density functionals. The gas-phase tautomerization energies of uracil and 5-bromouracil are very similar, favoring the keto tautomer. However, in the hydrated phase, the tautomeric preference of 5-bromouracil is reversed. This result is obtained for all four sets of clusters (BLYP or B3LYP optimized, containing 50 or 100 water clusters) and at all levels of theory employed, and indicates that a bromine atom in the 5-position considerably increases the proportion of the hydroxyl group present in uracil.     

Comparison of Some Computational Methods for Geometry Optimisation of Phosphorus Acid Derivatives

Several economical methods for geometry optimization, that should be applicable to larger molecules, have been evaluated for 19 phosphorus acid derivatives. MP2/cc-pVDZ geometry optimizations are used as reference points and the geometries obtained from the other methods are evaluated with respect to deviations in bond lengths and angles, from the reference geometries. The geometry optimization methods are also compared to the much used B3LYP/6-31G(d) method. Single point energies obtained by subsequent EDF1/6-31+G(d) or B3LYP/6-31+G(d,p) calculations on the respective equilibrium geometries are also reported relative to the energies obtained from the reference geometries. The geometries from HF/MIDI! optimizations were closer to those of the references than the geometries of the HF/3-21G(d), HF/6-31G(d), and B3LYP/MIDI! optimizations. The EDF1/6-31+G(d) or B3LYP/6-31+G(d,p) single point energies obtained from the HF/3-21G(d), HF/6-31G(d), and B3LYP/MIDI! geometries gave a mean absolute deviation (MAD) from that of the reference geometries of 1.4-3.9 kcal mol m 1 . The HF/MIDI! geometries, however, gave EDF1/6-31+G(d) and B3LYP/6-31+G(d,p) energies with a MAD of only about 0.5 and 0.55 kcal mol m 1 respectively from the energies obtained with the reference geometries. Thus, use of HF/MIDI! for geometry optimization of phosphorus acids is a method that gives geometries of near-MP2 quality, resulting in a fair accuracy of energies in subsequent single point calculations, at a much lower computational cost other methods that give similar accuracies.     

Theoretical study on the hydrogen abstraction reaction of CH3CH2F (HFC-161) with Cl atom

A direct dynamics method is employed to study the hydrogen abstraction reaction of CH₃CH₂F+Cl. Three distinct transition states are located, one for -H abstraction and two for β-H abstraction. The potential energy surface (PES) information is obtained at the QCISD(T)/6-311+G(3df,2p)//MP2/6-311G(d,p), CCSD(T)/6-311+G(3df,2p)//MP2/6-311G(d,p) and G2//MP2/6-311G(d,p) level. Based on the QCISD(T)/6-311+G(3df,2p)//MP2/6-311G(d,p) results, the rate constants of the three reaction channels are evaluated by using the canonical variational transition state theory (CVT) with small-curvature tunneling (SCT) contributions over the temperature range of 220–2800 K. The calculated results indicate that -H abstraction dominates the total reaction almost over the whole temperature range.     

Theoretical investigation on the adsorption of lithium atom on the Sin cluster (n=2–7)

Ab initio calculations are carried out to study the adsorption of Lithium atom on the Si_n cluster with n ranging from 2 to 7. At the MP2/6-31G(d) level, the structures of the neutral Si_n clusters and the Si_nLi clusters (n=2–7) are optimized. The single-point energy at QCISD/6-311+G(d,p) level for the optimized isomers are further performed. Harmonic vibrational frequency analysis at the MP2/6-31G(d) level is also undertaken to confirm that the optimize geometries are stable. Based on our results, the most favorable sites for Li adsorption on the Si_2–7 clusters are the bridge sites. In addition, the vertical ionization energies of the Si_nLi clusters and the electron affinities of the Si_n clusters are also calculated. The clear parallelism between the vertical ionization energies of Si_nLi and the electron affinities of Si_n is found. This is consistent with the fact that the framework of the Si_n in the Si_nLi cluster is similar to the structure of the corresponding negative ion .     

Inductive effects in radicals calculated from DFT energies; substituted bicyclo[2.2.2]octan-1-yloxy radicals

Energies of a series of 4-substituted 1-oxybicyclo[2.2.2]octan-1-yloxy radicals with 18 various substituents were calculated within the framework of the DFT theory at the levels UB3LYP/6-311+G(d,p)//UB3LYP/6-311+G(d,p) and UB3LYP/6-311++G(2df,p)//UB3LYP/6-311+G(d,p) and compared with similar series of the parent alcohols, their deprotonated and protonated forms calculated at the levels B3LYP/6-311+G(d,p)//B3LYP/6-311+G(d,p) and B3LYP/6-311++G(2df,p)//B3LYP/6-311+G(d,p). The two levels are of the same performance and both are sufficient for molecules of this type according to comparison with scarce experimental gas-phase acidities and basicities. The substituent effects were analyzed in terms of isodesmic equations. In addition to strong dependence on the substituent inductive effect, a slight dependence on the electronegativity of the first atom of the substituent was proven in certain cases. In all aspects, there is no qualitative difference between the effects on radicals and on similar closed shell species. Radicals behave as slightly electron deficient; the substituent effect is weaker than that on the ions but stronger than on neutral molecules.     

A computational study of the hydroxy-group directivity in the peroxyformic acid epoxidation of the chiral allylic alcohol (Z)-3-methyl-3-penten-2-ol: control of threo diastereoselectivity through allylic strain and hydrogen bonding

Eight transition structures for the epoxidation of the chiral allylic alcohol (Z)-3-methyl-3-penten-2-ol (1) with peroxyformic acid have been computed by the B3LYP density functional method with 6-31G(d) and 6-31G(d,p) basis sets. The four lowest-energy transition structures and their respective pre-reaction clusters were fully re-optimized by employing 6-311+G(d,p) and correlation-consistent polarized valence triple-zeta cc-pZTV basis sets. The relative energies of the transition structures were found to be highly sensitive to the basis set applied. The transition state for threo product formation, anti-(2S,3R,4S)-TS-3f, with the lowest total energy (at B3LYP/611+G(d,p) and B3LYP/AUG-cc-pZTV) of all the TSs examined, has a planar peracid moiety and is a precursor for the 1,4 migration of the peracid hydrogen atom Ha to the peroxy oxygen atom O4. The use of different basis sets does not affect markedly the geometry of the anti-(2S,3R,4S)-TS-3f transition structure. The transition state for erythro epoxidation, syn-(2R,3R,4S)-TS-3a, is 0.9 kcal/mol higher in energy and possesses a nonplanar peracid approaching the C=C bond in a manner intermediate between spiro and planar. The relative energy and nonplanarity of this syn transition structure is highly sensitive to the basis set applied. With the smaller basis set, 6-31G(d,p), it is actually the lowest-energy TS and the peracid moiety is significantly skewed. The contribution of the four lowest energy transition stuctures 3a, 3b, 3e, and 3f to the threo/erythro product ratio has been assessed through an extended Curtin-Hammet principle analysis of this multi-transition state reaction. It has been found that this approach agrees well with the experimental threo/erythro product ratio, in particular when the corrections for a solvent effect are made within the self-consistent isodensity polarized continuum model (SCI-PCM).     

Structural elucidation of nitro-substituted five-membered aromatic heterocycles utilizing GIAO DFT calculations

The GIAO (Gauge Including Atomic Orbitals) DFT (Density Functional Theory) method is applied at the B3LYP/6-31+G(d,p)//B3LYP/6-31+G(d), B3LYP/6-311++G(d,p)//B3LYP/6-31+G(d), B3LYP/6-311+G (2d,p)//B3LYP/6-31+G(d) and B3LYP/6-311++G(d,p)//B3LYP/6-311++G(d,p) levels of theory for the calculation of proton and carbon chemicals shifts and coupling constants for 25 nitro-substituted five-membered heterocycles. Difference (1D NOE) spectra in combination with long-range gHMBC experiments were used as tools for the structural elucidation of nitro-substituted five-membered heterocycles. The assigned NMR data (chemical shifts and coupling constants) for all compounds were found to be in good agreement with theoretical calculations using the GIAO DFT method. The magnitudes of one-bond (1JCH) and long-range (nJCH, n>1) coupling constants were utilized for unambiguous differentiation between regioisomers of nitro-substituted five-membered heterocycles.     

Experimental and theoretical investigation of the first overtone spectrum of 1,3,5-trinitrotoluene

Vibrational overtone spectroscopy is a powerful tool for studying intramolecular and intermolecular interactions. We report on a combined experimental and modeling study of the C-H stretch first overtone of bulk 1,3,5-trinitrotoluene (TNT) and TNT on fumed-silica powder. We recorded the overtone spectra by laser photoacoustic spectroscopy and compared them with those predicted with the harmonically coupled anharmonic oscillator model in the 5600-6600 cm(-1) region. The model systems included single molecules and hybrid quantum and molecular mechanical (QM:MM) clusters to account for the effects of intermolecular interactions on the observed spectra. We performed the hybrid QM:MM calculations at the HF/6-31+G(d,p), B3LYP/6-31+G(d,p), and MP2/6-31+G(d,p) levels of theory and with the universal force field (UFF) to account for van der Waals and electrostatic effects from surrounding molecules. Overtone spectra calculated from the MP2 level of theory, using a HF/3-21+G* calculation to assign molecular charges in the MM layer, and the Merz-Singh-Kollman population analysis for assigning partial charge in the QM layer and determining the transition dipole moment agreed best with the experimental data.     

丁烯和丁烷自由基阳离子的分子结构和超精细结构的 理论研究

用密度函数理论B3LYP方法和6-31G(d,p),6-311G(d,p)及6-311+G(d,p)基组，分别对1-C4H^+~8,2-C4H^+~8和C4H^+~10进行了构型优化和频率分析计算，预言1-C4H^+~8具有非平面构型，与以往报道的从头算和密度函数理论计算结果不同。在各自由基阳离子的B3LYP构型上，进行了B3LYP、MP2及MRSDCI方法的超精细偶合常数计算，得到了比以往更好的结果，特别是MP2/B3LYP计算值是至今与实验值符合得最好的理论计算结果。