Rheology and Permeability of Crosslinked Polyacrylamide Gel

Gels produced by crosslinking polyacrylamide solutions with chromium (III) have been characterized by dynamic rheology studies. To vary the gel strength, different polymer concentrations were used, while keeping the temperature, salinity, and crosslinker concentration constant. Both the loss and storage moduli increased with the polymer concentration for this gel system. The storage modulus at the end of the gelation was used to characterize the gel strength. Steady-state water flow experiments through gel-filled capillary tubes were performed, with the aim of linking the gel strength and flow behavior. The permeability was found to be a function of the water flow rate (velocity) and polymer concentration. Two parameters were used to characterize the flow behavior, intrinsic gel permeability and elasticity index, which are each functions of the polymer concentration. However, only one parameter is needed to fully identify the flow and rheological gel properties, as the elasticity index and storage modulus are linked by a power-law relationship. The loss modulus and intrinsic permeability are correlated with the storage modulus and elasticity index, respectively. A theoretical model for this behavior linking both gel properties based on the dual domain structure was used to demonstrate that the flow and rheological behavior of the gel are indeed related and that the gel strength controls the water permeability. Implications for prediction of flow of water through gels emplaced in a porous medium are discussed.     

The Heavy-Atom Effect on the Photophysics of Aromatic Hydrocarbons in the Presence of Solid Clays

The exchange of the original cation present on a Laponite clay (usually Na⁺) for heavy atoms such as Rb⁺, Cs⁺, and Tl⁺ significantly alters the emission characteristics of some aromatic hydrocarbons (p-terphenyl, naphthalene, pyrene, and biphenyl). The increase of the atomic mass of the cation induces a decrease of the fluorescence emission simultaneous with an increase of the emission in the region of lower energies of the spectra, ascribed to the phosphorescence of those hydrocarbons. Time-resolved experiments for the pyrene–clay system showed a decrease of singlet lifetimes for the heavier atoms. Hydrocarbon aggregates were also detected from both the emission spectra and the time-resolved studies. The “excimer-like” emission showed longer lifetimes (10–25 ns) than the monomolecular hydrocarbons (1–3 ns), as already found for other similar systems. The amount of aggregates increased for the heavier cations due to the smaller surface available on the clay particles. Experiments increasing the amount of Tl⁺ in samples containing a constant concentration of naphthalene allowed evaluation of the distance between the heavy atoms and the probe on the clay surface. The Perrin model treatment was used and resulted in approximately R₀=9.2 Å.     

Transport of Water and Ions Through a Clay Membrane

A model for hindered transport of water and ions is used to predict transient flow through a clay membrane caused by an initial difference in the concentration of salt solutions in reservoirs on the two sides of the membrane. Transport is assumed to be controlled by three coefficients, which are analogous to the permeability, salt diffusivity, and salt reflection coefficient of the membrane. Initial fluid motion is caused by osmosis, leading to a buildup of pressure on one side of the membrane. However, the clay forms an imperfect ion exclusion membrane and the final steady state is one of equal concentrations and pressures on the two sides of the membrane. The time-dependent differences in pressure and salt concentration across the membrane are predicted to vary as the sum of two decaying exponentials. When the salt reflection coefficient is small, one time scale governs Darcy flow through the membrane and another the diffusion of salt. Experimental results confirm the analysis. Although the salt concentration in the reservoirs was monitored in the experiments, estimates of the transport coefficients can be obtained by measuring only the pressure change across the membrane.     

Polydispersity and Functional Group Distribution of Dispersant Polymer: Adsorption Properties and Magnetic Paint Dispersion

The quantitative analysis examining the functional group distribution of a dispersant polymer for magnetic paints is conducted by statistical estimation and adsorption experiments. The dispersant polymer contains averagely one or two functional groups on the chain, and has generally large polydispersity. By the calculation based on the random distribution of the functional group and the molecular weight, a typical design of the dispersant polymer is found to contain a significant amount of nonfunctionalized chains and highly functionalized ones. In adsorption experiments, the adsorbed amount of the polymer mass and the functional group are separately measured to determine the functional group distribution. The distribution is also evaluated by a sequential adsorption experiment, in which the chains are fractionated by the adsorption strength. Obtained experimental results agree with the calculated results. A practical method for increasing the effective chains in the paint is to make use of a preferential adsorption of the functionalized chain.     

Advective flow and floc permeability

This work monitored advection flow through a floc by bubble tracking. Close examination of the motion of a swarm of hydrogen bubbles that passed over a free-falling floc allowed the extent of advection flow to be estimated at 53% for the original activated sludge floc, and 12% for the flocculated floc. The interior permeability of the sludge flocs was estimated from this information. The fluid force exerted on the falling floc was also considered.     

Thermocapillary Alignment of Gas Bubbles Induced by Convective Transport

The effect of a weak convective heat transfer on the thermocapillary interaction of two bubbles with an arbitrary orientation relative to an externally imposed temperature gradient is examined. Asymptotic analysis of the case of large separation distances, Z, suggests that the corrections to the bubbles' velocities are of (Pe/Z²), rather than (Pe²) previously found for an isolated bubble. Equal-sized bubbles are known to move with the same velocities, as if they were isolated, when heat conduction is the only transport mechanism. However, the convective transport results in a relative motion of the bubbles. The tendency of equal bubbles to line up in a plane perpendicular to the applied thermal gradient is shown analytically in the weakly nonlinear limit of small Pe numbers, and an interesting interaction behavior in the case of unequal bubbles is discussed.     

Interactions between Poly(ethylene oxide) and Sodium Alkylcarboxylates As Studied by Conductivity and Gel Permeation Chromatography

The interactions between PEO and sodium alkylcarboxylates (octyl, decyl, and dodecyl) have been investigated by conductivity measurements and gel permeation chromatography (GPC). Also included in the study was sodium dodecyl sulfate. From the conductivity measurements the critical aggregation concentration, ionization degree, and binding ratios were determined; the binding ratio was also determined from GPC. PEO–surfactant interactions were observed for all the studied surfactants, except sodium octanoate. For the polymer–surfactant complexes the ionization degree was in all cases observed to be about 0.2 higher than the ionization degree for the corresponding aqueous micelles. Further, the binding ratio decreased somewhat with decreasing chain length of the alkylcarboxylate. The Gibbs free energy showed that the polymer–surfactant interaction decreases with decreasing chain length of the alkylcarboxylates and is weaker for alkylcarboxylate compared to alkylsulfate of similar chain length.     

Electronic Properties of Q-CdS Clusters Stabilized by Adenine

Adenine-capped Q-CdS has been synthesized in an aqueous medium. IR spectroscopy indicates an interaction between Q-CdS and adenine through Cd²⁺. The amount of adenine controls the size of the clusters. A typical 5×10⁻³ mol dm⁻³ of adenine produces nanoclusters having the onset of absorption and an emission band at 2.8 and 2.35 eV, respectively. Adenine binds to the shallower traps and enhances the emission intensity of the 530-nm band without causing any shift in emission. Thermolysis of these colloids leads to the production of larger CdS clusters with changed electronic properties. Relaxation kinetics of charge carriers shows their average lifetime to increase with a decrease in particle size. Illumination of these particles does not lead to their photodissolution. This catalyst is, however, photoactive. The addition of indole causes the quenching of its emission. The photocatalytic oxidation of indole produces indigo with a quantum efficiency of 0.03.     

H(2)O Outgassing Properties of Fumed and Precipitated Silica Particles by Temperature-Programmed Desorption

Temperature-programmed desorption was performed at temperatures up to 850 K on as-received fumed and precipitated silica particles. Physisorbed water molecules on both types of silica had activation energies in the range of 38–61 kJ/mol. However, the activation energies of desorption for chemisorbed water varied from 80 to >247 kJ/mol for fumed silica, Cab-O-Sil-M-7D, and 96 to 155 kJ/mol for precipitated silica, Hi-Sil-233. Our results suggest that physisorbed water can be effectively pumped away at room temperature (or preferably at 320 K) in a matter of hours. Chemisorbed water with high activation energies of desorption (>126 kJ/mol) will not escape silica surfaces in 100 years even at 320 K, while a significant amount of the chemisorbed water with medium activation energies (80–109 kJ/mol) will leave the silica surfaces in that time span. Most of the chemisorbed water with activation energies <126 kJ/mol can be pumped away in a matter of days in a good vacuum environment at 500 K. We had previously measured about 0.1–0.4 wt% of water in silica-reinforced polysiloxane formulations containing 21% Cab-O-Sil-M-7D and 4% Hi-Sil-233. Comparing present results with these formulations, we conclude that the adsorbed H₂O and the Si–OH bonds on the silica surfaces are the major contributors to water outgassing from these types of silica-filled polymers.     

Thermodynamic quantities of surface formation of aqueous electrolyte solutions. V. Aqueous solutions of aliphatic amino acids

The surface tension of aqueous solutions of glycine, L-alanine, L-valine, and L-leucine has been observed using the drop volume method as a function of temperature and concentration. The L-leucine molecules form an adsorbed film, while glycine affects the water surface in accordance with simple salts which dissociate into cations and anions completely. The surface tension data have been analyzed in view of K. Motomura's thermodynamic treatment (J. Colloid Interface Sci.64, 348 (1978)), and the thermodynamic quantities relevant to the surface have been shown systematically.     

Adsorption of 1,4-Benzenedithiol on Gold and Silver Surfaces: Surface-Enhanced Raman Scattering Study

The adsorption behavior of 1,4-benzenedithiol (1,4-BDT) on colloidal gold and silver surfaces has been investigated by means of surface-enhanced Raman scattering (SERS). 1,4-BDT chemisorbed dissociatively on both gold and silver surfaces but as mono- and dithiolate, respectively. Regardless of the bulk concentration of 1,4-BDT, only a monolayer was assembled on the silver surface with a flat orientation by forming two Ag–S bonds. On the gold surface, the monothiolate species,1,4-BDT⁻¹, appeared to assume a rather flat orientation at a very low surface coverage, but as the surface coverage was increased, the adsorbate took a perpendicular orientation. Furthermore, when the bulk concentration of 1,4-BDT was close to that required for a full-monolayer coverage limit, a band assignable to the S–S stretching vibration appeared at 536 cm⁻¹ in the gold sol SERS spectra. A separate ellipsometry measurement performed with vacuum-evaporated gold substrates revealed that up to tetralayers could be assembled on gold in 1 mM n-hexane solution of 1,4-BDT while at best a bilayer formed in either methanol or ethanol solution. The different adsorbate structure of 1,4-BDT on gold and silver was overall quite comparable to that of p-xylene-α,α′-dithiol.     

Preparation of finely dispersed drugs. III. Cyclosporine

Two different precipitation processes are described, which produced dispersions of spherical particles of cyclosporine ranging in diameter from approximately 10 nm to several micrometers. This drug is of interest for its immunosuppressive activity in the antirejection of transplanted organs. The effects of several experimental parameters on the average particles size and uniformity have been investigated. Aging of spherical particles resulted in large crystalline-type aggregates.     

Assembly of Alternated Multivalent Ion/Polyelectrolyte Layers on Colloidal Particles. Stability of the Multilayers and Encapsulation of Macromolecules into Polyelectrolyte Capsules

Alternating adsorption of multivalent ions and oppositely charged polyelectrolytes on colloid particles has been investigated. Multilayer films composed of Tb³⁺/polysterene sulfonate (PSS) and 4-pyrene sulfate/polyallylamine (PAH) were successfully assembled on polysterene sulfonate (PS) and melamine formaldehyde (MF) latex particles. The amount of assembled material was estimated by fluorescence and the linear growth of the film versus the number of layers was demonstrated. These multilayers are not stable and can be decomposed by salt and temperature. Dissolution of MF particles leads to formation of hollow capsules consisting of multivalent ion/polyelectrolyte multilayers. Comparative analysis of the capsules was done by confocal and scanning force microscopy. Complex hollow spheres consisting of Tb³⁺/PSS or 4-PS/PAH as an inner shell and stable PSS/PAH as an outer shell were produced. Due to selective permeability of the outer shell after degradation of the inner shell the multivalent ions are released out of the capsule while the polyelectrolytes fill the capsule interior. This is indicative of swelling of the capsule by osmotic pressure. The filled capsules were studied by confocal and scanning electron microscopy. Possibilities of encapsulating macromolecules in defined amounts per capsule are discussed.     

Synthesis and Surface Properties of N-Alkyl-N-methylgluconamides and N-Alkyl-N-methyllactobionamides

Three series of nonionic N-alkylaldonamides, N-alkyl-N-methylgluconamides (Cn-MGA, Cn: n-C(10)H(21), n-C(12)H(25), n-C(14)H(29), n-C(16)H(33), and n-C(18)H(37)), N-alkyl-N-methyllactobionamides (Cn-MLA, alkyl as above-mentioned), and N-oleyl-N-methylglucon/lactobionamide, were synthesized in the reaction of an appropriate N-alkyl-N-methylamine with delta-D-glucolactone and lactobionic acid, respectively. Krafft temperatures of aqueous solutions and surface properties of these surfactants at 20 degrees C, i.e., surface excess concentration, Gamma(cmc), surface area demand per molecule, A(min), efficiency in surface tension reduction, pC(20), effectiveness in surface tension reduction, Pi(cmc), critical micelle concentration, CMC, and CMC/C(20) parameter as well as standard free energies of adsorption, DeltaG degrees (ads), and of micellization, DeltaG degrees (mic), were determined. It was shown that introduction of the methyl group to the amide nitrogen increased the solubility of the surfactants, which was confirmed by their Krafft temperatures. Lactobionamides are more water soluble than gluconamides. On the other hand, the Cn-MGA surfactants are more surface active than the respective Cn-MLA ones. This observation is based on the determined adsorption and micellization parameters. The presence of one double bond in a hydrocarbon chain as in oleyl-amides increases their hydrophilic character compared with that of saturated C18 derivatives. No distinct differences were observed between the A(min) values obtained for both series studied, although they differ markedly in the size of the hydrophilic groups. Copyright 2001 Academic Press.     

Theory of Frequency-Dependent Polarization of General Planar Electrodes with Zeta Potentials of Arbitrary Magnitude in Ionic Media: 2. Applications and Results from Homogeneous and Array Systems of Electrodes

The expressions obtained in the previous paper for electrode polarization are applied to a homogeneous planar electrode and a planar array of electrodes used in the generation of nonuniform fields. The effective far field experienced outside the double layer is computed for both electrodes, and sample spectra are provided. The effective far field expression contains the electrode impedance and the effects of concentration polarization due to the static double layer on the electrode generated by the ζ potential. The effective far field results are compact and contain simple integrals that can be evaluated numerically.     

Multiple emulsion stability: pressure balance and interfacial film strength

The objective of this study was to investigate the significance of inner and outer phase pressure, as well as interfacial film strength on W/O/W multiple emulsion stability using microscopy and long-term stability tests. It was observed that immediately upon applying a coverslip to samples the multiple droplets deformed and there was coalescence of the inner aqueous droplets. Under certain conditions (such as lipophilic surfactant concentration and internal phase osmotic pressure) the destabilized multiple emulsions formed unique metastable structures that had a "dimpled" appearance. The formation of these metastable structures correlated with the real-time instability of the W/O/W multiple emulsions investigated. Multiple emulsion stability also correlated with the interfacial film strength (measured by interfacial elasticity) of the hydrophobic surfactant at the mineral oil/external continuous aqueous phase interface. The formation of the metastable dimpled structures and the long-term stability of the multiple emulsions were dependent on the osmotic pressure of the inner droplets and the Laplace curvature pressure as described by the Walstra Equation (P. Walstra, "Encyclopedia of Emulsion Technology" (P. Becher, Ed.), Vol. 4. Dekker, New York, 1996). It appears that the effect of coverslip pressure on multiple emulsions may be useful as an accelerated stability testing method or for initial formulation screening.     

A structural study of amphiphilic PAMAM (poly(amido amine)) dendrimers in Langmuir and Langmuir-Blodgett films

Two amphiphilic PAMAM dendrimers are synthesized by attaching 12-hydroxydodecanoic acid (HA) chains to a poly(amido amine) (PAMAM) dendrimer core (including generation I and generation II). The limiting molecular area obtained from the surface pressure-area isotherm at the air/water interface suggests the edge-on configuration for both dendrimers in Langmuir films. The edge-on arrangement is also supported by the atomic force microscopic (AFM) studies of the Langmuir-Blodgett films.     

Dielectrophoretic behavior of latex nanospheres: low-frequency dispersion

The electrostatic manipulation of nanoparticles using nonuniform electric fields (dielectrophoresis) has proved a useful method of investigating the movement of charge around colloidal particles. While previous work has explained many of the ways in which particle behavior deviates from that predicted by classical Maxwell-Wagner interfacial polarization theory, there exists an additional, anomalous polarization mechanism observed in media of high conductivity, causing an unexpected observation of positive dielectrophoresis. Here this is suggested that this may be explained in terms of the polarization of the Stern layer.     

Highly Dispersed X/SiO(2) and C/X/SiO(2) (X=Alumina, Titania, Alumina/Titania) in the Gas and Liquid Media

Fumed oxides, such as silica, alumina, titania, and mixed X/silicas (X=Al₂O₃ (AS), TiO₂ (TS), CVD-TiO₂, Al₂O₃/TiO₂ (AST)), pristine or covered by carbon deposits formed due to pyrolysis of cyclohexene, were studied using nitrogen adsorption–desorption, photon correlation spectroscopy particle sizing, and electrophoresis. A significant influence of the nature of surface-active sites and structural features of oxides (individual silica, mixed fumed, or prepared using chemical vapor deposition (CVD)) on the pyrolysis of cyclohexene is observed with respect to the pore size distributions due to differences between primary particles in aggregates and on their outer surfaces in the filling of channels by pyrocarbon, resulting also in a decrease in fractal dimension. Structural characteristics and dependences of the particle size distribution and electrokinetic potential of X/SiO₂ and C/X/SiO₂ on the pH of aqueous suspensions suggest that the carbon deposit covers mainly acidic sites at the X/SiO₂ interfaces and X phase patches possessing catalytic activity in pyrolysis, as the negative charge of particles is reduced by pyrocarbon grafting.