Polyols as scaffolds in the development of ion-selective polymer-supported reagents: the effect of auxiliary groups on the mechanism of metal ion complexation

In developing ion-selective polymer-supported reagents, the inherent affinity of a given ligand for a targeted metal ion is found to be affected by auxiliary groups on a scaffold. A series of polyols (ethylene glycol, glycerol, tris(hydroxymethyl)ethane, pentaerythritol, and pentaerythritol triethoxylate) are immobilized onto cross-linked poly(vinylbenzyl chloride), then monophosphorylated. The pentaerythritol, glycerol, and pentaerythritol triethoxylate polymers have the highest affinities for both trivalent and divalent ions. The distribution coefficients of divalent ions (Pb(II), Cd(II), Cu(II), Ni(II), and Zn(II)) correlate with the Misono softness parameter, reflecting a single-site interaction between the metal ion and the phosphoryl oxygen. The distribution coefficients for trivalent ions are in the order Fe(III) < Al(III) < Y(III) less, approximately < La(III) approximately Eu(III) approximately Lu(III). For example, the phosphorylated pentaerythritol polymer has distribution coefficients (also reported as percent complexed) for Fe of 68.4 (75.3%); for Al of 182 (88.5%); and for the rare earth ions Y, Lu, Eu, and La of 374 (94.4%), 1390 (98.4%), 1690 (98.4%), and 708 (96.9%), respectively, from solutions at pH 2.0. The opposite trend (i.e., Fe(III) > Al(III) > (rare earths)) correlates with their hardness, acidity, electron affinity, electronegativity, and formation constants with soluble complexants, including tributyl phosphate. A binding mechanism is proposed wherein the polymer initially has the auxiliary -OH groups hydrogen-bonded to the phosphate ligand; then, binding to the polarizable phosphoryl oxygen with the divalent ions dominates, while the trivalent ions are drawn closer to the phosphoryl oxygen because of their greater charge and, once closer, bind in a multisite interaction with both the phosphate and -OH groups.     

The crystal and molecular structure of an ionic hydrazinium magnesium(II) complex with pyridazine-3,6-dicarboxylate and water ligands

The structure of hydrazinium magnesium(II) pyridazine-3,6-dicarboxylate comprises two univalent hydrogen hydrazine cations, a divalent di(aqua-O)bis(pyridazine-3,6-dicarboxylato-N,O) magnesium(II) anion and two solvate water molecules in the triclinic unit cell. The magnesium(II) ion is located on the center of symmetry. The coordination around the magnesium(II) ion is slightly distorted octahedral. The ligand molecules are coplanar. Their N,O bonding moieties coordinated to the metal ion form the equatorial plane of the distorted octahedron (Mg–O 2.062?Å, Mg–N 2.176?Å) with two water ligands in the trans axial sites (Mg–O 2.047?Å).     

Enhanced metal ion selectivity of 2,9-di-(pyrid-2-yl)-1,10-phenanthroline and its use as a fluorescent sensor for cadmium(II)

The metal ion complexing properties of the ligand DPP (2,9-di-(pyrid-2-yl)-1,10-phenanthroline) were studied by crystallography, fluorimetry, and UV-visible spectroscopy. Because DPP forms five-membered chelate rings, it will favor complexation with metal ions of an ionic radius close to 1.0 A. Metal ion complexation and accompanying selectivity of DPP is enhanced by the rigidity of the aromatic backbone of the ligand. Cd2+, with an ionic radius of 0.96 A, exhibits a strong CHEF (chelation enhanced fluorescence) effect with 10(-8) M DPP, and Cd2+ concentrations down to 10(-9) M can be detected. Other metal ions that cause a significant CHEF effect with DPP are Ca2+ (10(-3) M) and Na+ (1.0 M), whereas metal ions such as Zn2+, Pb2+, and Hg2+ cause no CHEF effect with DPP. The lack of a CHEF effect for Zn2+ relates to the inability of this small ion to contact all four donor atoms of DPP. The structures of [Cd(DPP)2](ClO4)2 (1), [Pb(DPP)(ClO4)2H2O] (2), and [Hg(DPP)(ClO4)2] (3) are reported. The Cd(II) in 1 is 8-coordinate with the Cd-N bonds to the outer pyridyl groups stretched by steric clashes between the o-hydrogens on these outer pyridyl groups and the central aromatic ring of the second DPP ligand. The 8-coordinate Pb(II) in 2 has two short Pb-N bonds to the two central nitrogens of DPP, with longer bonds to the outer N-donors. The coordination sphere around the Pb(II) is completed by a coordinated water molecule, and two coordinated ClO4(-) ions, with long Pb-O bonds to ClO4(-) oxygens, typical of a sterically active lone pair on Pb(II). The Hg(II) in 3 shows an 8-coordinate structure with the Hg(II) forming short Hg-N bonds to the outer pyridyl groups of DPP, whereas the other Hg-N and Hg-O bonds are rather long. The structures are discussed in terms of the fit of large metal ions to DPP with minimal steric strain. The UV-visible studies of the equilibria involving DPP and metal ions gave formation constants that show that DPP has a higher affinity for metal ions with an ionic radius close to 1.0 A, particularly Cd(II), Gd(III), and Bi(III), and low affinity for small metal ions such as Ni(II) and Zn(II). The complexes of several metal ions, such as Cd(II), Gd(III), and Pb(II), showed an equilibrium involving deprotonation of the complex at remarkably low pH values, which was attributed to deprotonation of coordinated water molecules according to: [M(DPP)(H2O)]n+ <==> [M(DPP)(OH)](n-1)+ + H+. The tendency to deprotonation of these DPP complexes at low pH is discussed in terms of the large hydrophobic surface of the coordinated DPP ligand destabilizing the hydration of coordinated water molecules and the build-up of charge on the metal ion in its DPP complex because of the inability of the coordinated DPP ligand to hydrogen bond with the solvent.     

Preparation and Characterization of Polyesterurethane Metallopolymers Containing Transition Metal Ions

Several series of metallopolymers (MP) were synthesized from a MDI-based polyesterurethane and various transition metal ion species, namely, copper(II), manganese(II), cobalt(II), iron(III) and chromium(III). Each series of MP were prepared by using different initial molar ratios urethane groups/metal ions (U/M). MP were characterized in comparison with the parent polyurethane (PU) by atomic absorption spectrometry (AAS), UV-vis absorption spectroscopy, FT-IR spectroscopy, differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA) and tensile testing. The transition metal ions form coordination complexes with polyurethane functional groups, the intermolecular complexation resulting in the crosslinking of polymer chains. As a consequence, modifications take place in the original structure of PU, e.g. hydrogen bonding and crystallinity of the hard-segment domains. MP compared with PU present differences in viscoelastic and mechanical behaviors, which generally indicate the reinforcing effect of metal ions on the polyurethane matrix, as well in thermal stability. It was revealed that each transition metal ion has specific effects on the structure and properties of PU. The implications and mechanisms behind these observations are discussed.     

Recognition and quantification of binary and ternary mixtures of isomeric peptides by the kinetic method: metal ion and ligand effects on the dissociation of metal-bound complexes

The kinetic method is applied to differentiate and quantify mixtures of isomeric tripeptides based on the competitive dissociations of divalent metal ion-bound clusters in an ion trap mass spectrometer. This methodology is extended further to determine compositions of ternary mixtures of the isomers Gly-Gly-Ala (GGA), Ala-Gly-Gly (AGG), and Gly-Ala-Gly (GAG). This procedure also allows to perform chiral quantification of a ternary mixture of optical isomers. The divalent metal ion Ca(II) is particularly appropriate for isomeric distinction and quantification of the isobaric tripeptides Gly-Gly-Leu/Gly-Gly-Ile (GGL/GGI). Among the first-row transition metal ions, Cu(II) yields remarkably effective isomeric differentiation for both the isobaric tripeptides, GGI/GGL using GAG as the reference ligand, and the positional isomers GAG/GGA using GGI as the reference ligand. This is probably due to agostic bonding: alpha-agostic bonding occurs between Cu(II) and GAG and beta-agostic bonding between Cu(II) and GGI, each produces large but different steric effects on the stability of the Cu(II)-bound dimeric clusters. These data form the basis for possible future quantitative analyses of mixtures of larger peptides such as are generated, for example, in combinatorial synthesis of peptides and peptide mimics.     

Complexation, computational, magnetic, and structural studies of the Maillard reaction product isomaltol including investigation of an uncommon π interaction with copper(II)

The metal complexation properties of the naturally occurring Maillard reaction product isomaltol HL(2) are investigated by measurement of its stability constants with copper(II), zinc(II), and iron(III) using potentiometric pH titrations in water, by structural and magnetic characterization of its crystalline complex, [Cu(L(2))(2)]·8H(2)O, and by density functional theory calculations. Strong complexation is observed to form the bis(isomaltolato)copper(II) complex incorporating copper in a typical (pseudo-)square-planar geometry. In the solid state, extensive intra- and intermolecular hydrogen bonding involving all three oxygen functions per ligand assembles the complexes into ribbons that interact to form two-dimensional arrays; further hydrogen bonds and π interactions between the furan moiety of the anionic ligands and adjacent copper(II) centers connect the complexes in the third dimension, leading to a compact polymeric three-dimensional (3D) arrangement. The latter interactions involving copper(II), which represent an underappreciated aspect of copper(II) chemistry, are compared to similar interactions present in other copper(II) 3D structures showing interactions with benzene molecules; the results indicate that dispersion forces dominate in the π system to chelated copper(II) ion interactions.     

Kinetic studies of complexation reactions of water-soluble hydrazones with nickel(II) and palladium(II) ions

The kinetics of complexation reactions of five water-soluble heterocyclic hydrazones with nickel(II) and palladium(II) ions have been investigated by stopped-flow spectrophotometry. Rates of complexations with nickel(II) and palladium(II) in the absence of chloride ion were found to be proportional to the first order of the ligand and metal ion concentrations and to the inverse first order of the hydrogen ion concentration except for the complexation of alpha-(2-benzimidazolyl)-alpha-(5-nitro-2-pyridyl)hydrazono-3-toluenesulfonic acid with palladium(II). Rates of complexation with palladium(II) in the presence of chloride ion were best described by a two-term expression, both terms being first order in the palladium ion and ligand concentrations and inverse first order in the hydrogen ion concentration. The first term has zero dependence of the chloride ion concentration, whereas the second is first order with respect to the chloride ion concentration. The rate constant for each complexation reaction was determined. The complexation of the hydrazones with nickel(II) was estimated to go according to an Eigen mechanism and that with palladium (II) according to the associative mechanism.     

Comparison of energy interaction parameters for the complexation of Pr(III) with glutathione reduced (GSH) in absence and presence of Zn(II) in aqueous and aquated organic solvents using 4f-4f transition spectra as PROBE

The coordination chemistry of glutathione reduced (GSH) is of great importance as it acts as excellent model system for the binding of metal ions. The GSH complexation with metal ions is involved in the toxicology of different metal ions. Its coordination behaviour for soft metal ions and hard metal ions is found different because of the structure of GSH and its different potential binding sites. In our work we have studied two chemically dissimilar metal ions viz. Pr(III), which prefer hard donor site like carboxylic groups and Zn(II) the soft metal ion which prefer peptide-NH and sulphydryl groups. The absorption difference and comparative absorption spectroscopy involving 4f-4f transitions of the heterobimetallic Complexation of GSH with Pr(III) and Zn(II) has been explored in aqueous and aquated organic solvents. The variation in the energy parameters like Slater-Condon (F(K)), Racah (E(K)) and Lande (xi(4f)), Nephelauxetic parameter (beta) and bonding parameter (b(1/2)) are computed to explain the nature of complexation.     

Deliberate synthesis for magnetostructural study of linear tetranuclear complexes BIIIMnIIMnIIBIII, MnIIIMnIIMnIIMnIII, MnIVMnIIMnIIMnIV, FeIIIMnIIMnIIFeIII, and CrIIIMnIIMnIICrIII. Influence of terminal ions on the exchange coupling

As part of an ongoing effort to deliberate synthesis of polynuclear heterometal complexes, we are exploring synthetic routes to high-nuclearity complexes using "metal oximates" as building blocks. Series of tetranuclear linear complex ions of the general types M(A)M(B)M(B)M(A), where M(A) is a trivalent or tetravalent metal ion and M(B) is a divalent metal ion, e.g., Mn(II), have been synthesized by using the dimetal(II) anionic cores, [(M(II)(B))(2)(dfmp)(3)](5)(-) as a bridging ligand for the terminal LM(A) fragments where H(3)dfmp is a dinucleating phenol-oxime ligand, 2,6-diformyl-4-methylphenol oxime, and L denotes a facially coordinating cyclic tridentate amine, 1,4,7-trimethyl-1,4,7-triazacyclononane. The following combinations are reported here, B(III)Mn(II)Mn(II)B(III) (1), Mn(III)Mn(II)Mn(II)Mn(III) (2), Mn(IV)Mn(II)Mn(II)Mn(IV) (3), Fe(III)Mn(II)Mn(II)Fe(III) (4), and Cr(III)Mn(II)Mn(II)Cr(III) (5). The compounds have been characterized spectroscopically and by magnetic susceptibility measurements in the temperature range 2.0-290 K at different field strengths. Complexes 1-4 have also been structurally characterized by single-crystal X-ray diffraction techniques at 100 K. The magnetic behaviors of the compounds indicate weak antiferromagnetic coupling between the manganese(II) centers in the central trisphenoxo-bridged dimanganese(II) core, whereas the coupling between the terminal M(A) and its neighboring Mn(II) center varies and is weak ferromagnetic or antiferromagnetic. The relative interaction intensity in such a series of complexes is discussed. Finally, a profound influence of the charge on the terminal metal ions on the strength of the exchange coupling in the central dimanganese(II) core has been observed and discussed in relation to the covalency of the metal-ligand bonding.     

Synthesis and characterization of the tetranuclear iron(III) complex of a new asymmetric multidentate ligand. A structural model for purple acid phosphatases

The ligand, 2-((2-hydroxy-5-methyl-3-((pyridin-2-ylmethylamino)methyl)benzyl)(2-hydroxybenzyl)amino)acetic acid (H(3)HPBA), which contains a donor atom set that mimics that of the active site of purple acid phosphatase is described. Reaction of H(3)HPBA with iron(III) or iron(II) salts results in formation of the tetranuclear complex, [Fe(4)(HPBA)(2)(OAc)(2)(mu-O)(mu-OH)(OH(2))(2)]ClO(4) x 5H(2)O. X-Ray structural analysis reveals the cation consists of four iron(III) ions, two HPBA(3-) ligands, two bridging acetate ligands, a bridging oxide ion and a bridging hydroxide ion. Each binucleating HPBA(3-) ligand coordinates two structurally distinct hexacoordinate iron(III) ions. The two metal ions coordinated to a HPBA(3-) ligand are linked to the two iron(III) metal ions of a second, similar binuclear unit by intramolecular oxide and hydroxide bridging moieties to form a tetramer. The complex has been further characterised by elemental analysis, mass spectrometry, UV-vis and MCD spectroscopy, X-ray crystallography, magnetic susceptibility measurements and variable-temperature M?ssbauer spectroscopy.     

Supramolecular Assembly: A Comparative Structural Study of the Incorporation of Bis(2-guanidinobenzimidazolo)nickel(II) into Supramolecular Arrays

The structural effects of incorporating a non-planar neutral metal complex, bis(2-guanidinobenzimidazolo)nickel(II), into three supramolecular arrays are described. The complex has a donor-acceptor-donor (DAD) hydrogen bonding motif on each ligand and this motif is used to link it to bis(biureto)nickelate(II) ions, or to 1,8-naphthalimide or phthalimide molecules, all of which incorporate a complementary acceptor-donor-acceptor (ADA) hydrogen bonding motif. The geometry about the metal ion as well as the nature of the network of hydrogen bonds formed have significant influences on the supramolecular structure adopted. An interesting combination of intramolecular hydrogen bonding and close ~ -stacking interactions also occur in each species.     

Co-ordination behaviour of a novel bisthiourea tripodal ligand: structural, spectroscopic and electrochemical properties of a series of transition metal complexes

The synthesis of a thiourea substituted derivative of tris(pyridyl-2-methyl)amine (TPA) is reported. Two of the three pyridine rings are substituted in the 6-position with benzoylthiourea groups. These thiourea groups undergo intramolecular hydrogen bonding to form six-membered rings which leaves one N-H group available to form hydrogen bonds with other molecules. This reports details how the complexation of this new ligand with transition metal ions yields complexes with differing geometries. Seven co-ordinate Mn(II) and Cd(II), six co-ordinate Ni(II) and five co-ordinate Co(II), Cu(II) and Zn(II) complexes have been isolated.     

Polymer Supported Schiff Base Complexes of Iron(III), Cobalt(II) and Nickel(II) Ions and their Catalytic Activity in Oxidation of Phenol and Cyclohexene

The polymer supported transition metal complexes of N,N′‐bis (o‐hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by immobilization of N,N′‐bis(4‐amino‐o‐hydroxyacetophenone)hydrazine (AHPHZ) Schiff base on chloromethylated polystyrene beads of a constant degree of crosslinking and then loading iron(III), cobalt(II) and nickel(II) ions in methanol. The complexation of polymer anchored HPHZ Schiff base with iron(III), cobalt(II) and nickel(II) ions was 83.30%, 84.20% and 87.80%, respectively, whereas with unsupported HPHZ Schiff base, the complexation of these metal ions was 80.3%, 79.90% and 85.63%. The unsupported and polymer supported metal complexes were characterized for their structures using I.R, UV and elemental analysis. The iron(III) complexes of HPHZ Schiff base were octahedral in geometry, whereas cobalt(II) and nickel(II) complexes showed square planar structures as supported by UV and magnetic measurements. The thermogravimetric analysis (TGA) of HPHZ Schiff base and its metal complexes was used to analyze the variation in thermal stability of HPHZ Schiff base on complexation with metal ions. The HPHZ Schiff base showed a weight loss of 58% at 500°C, but its iron(III), cobalt(II) and nickel(II) ions complexes have shown a weight loss of 30%, 52% and 45% at same temperature. The catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in presence of hydrogen peroxide as an oxidant. The supported HPHZ Schiff base complexes of iron(III) ions showed 64.0% conversion for phenol and 81.3% conversion for cyclohexene at a molar ratio of 1∶1∶1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 55.5% conversion for phenol and 66.4% conversion for cyclohexene at 1∶1∶1 molar ratio of substrate to catalyst and hydrogen peroxide. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 90.5% and 96.5% with supported HPHZ Schiff base complexes of iron(III) ions, but was found to be low with cobalt(II) and nickel(II) ions complexes of Schiff base. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was different with studied metal ions and varied with molar ratio of metal ions in the reaction mixture. The selectivity was constant on varying the molar ratio of hydrogen peroxide and substrate. The energy of activation for epoxidation of cyclohexene and phenol conversion in presence of polymer supported HPHZ Schiff base complexes of iron(III) ions was 8.9 kJ mol^?1 and 22.8 kJ mol^?1, respectively, but was high with Schiff base complexes of cobalt(II) and nickel(II) ions and with unsupported Schiff base complexes.     

Molecular architectures for trimetallic d/f/d complexes: structural and magnetic properties of a LnNi2 core

A series of cationic, trimetallic d/f/d complexes have been prepared which use a multidentate, macrocyclic amine phenol ligand to coordinate divalent first row d-block transition metal ions (TM) and lanthanides (Ln) ions in close proximity, desirable for magnetic studies. Isolable complexes of the d/f/d cluster compounds with the formula [Ln(TM)2(bcn)2]ClO4.nH2O, where H3bcn is tris-N, N', N'-(2-hydroxybenzyl)-1,4,7-triazacyclononane, TM = Zn(II) and Ni(II) and Ln = La(III), Nd(III), Gd(III), Dy(III), and Yb(III), were synthesized by a one-pot sequential reaction of stoichiometric amounts of H 3bcn with the TM(II) and Ln(III) metal ions. The spontaneously formed cationic complexes were characterized by a variety of analytical techniques including IR, NMR, +ESI-MS, and EA. The [TM(Hbcn)].nH2O and [TM3(bcn)2].nH2O complexes were also synthesized to probe the building blocks of the d/f/d coaggregated species. The solid-state X-ray crystal structures of [GdNi2(bcn)2(CH3CN)2]ClO4.CH3CN and [GdZn2(bcn)2(CH3CN)2]ClO4.CH3CN were determined to be nearly identical with each TM(II) encapsulated in an octahedral geometry by the N3O3 binding pocket of the bcn (3-) ligand. The eight coordinate Gd(III) was bicapped by two [TM(bcn)](-) moieties and coordinated by two solvent molecules. Because of the isostructurality of the [LnZn2(bcn)2]ClO4.nH2O and [LnNi2(bcn)2]ClO4.nH2O complexes, an empirical approach using the LnZn2 magnetic data was utilized to remove first-order anisotropic contributions from the LnNi2 species. Ferromagnetic spin interactions were determined for the [LnNi2(bcn)2]ClO4.nH2O complexes, where Ln = Gd(III), Dy(III), and Yb(III), while an antiferromagnetic exchange was observed for Ln = Nd(III).     

Heteroditopic receptors tris(2-pyridylamide) derivatives derived from hexahomotrioxacalix[3]arene triacetic acid

The lower rim functionalized cone-hexahomotrioxacalix[3]arene tris(2-pyridylamide) derivatives cone- 3 and cone-7 having the hydrogen bonding groups and 2-pyridyl groups were synthesized from triol 1 by a stepwise reaction. Extraction data for alkali metal ions, transition metal ions, and alkyl ammonium ions from water into dichloromethane are discussed. Due to the strong intramolecular hydrogen bonding between the neighboring NH and CO groups, their affinities to metal cations were weakened. The complexation modes of cone-3 and cone -7 with n-BuNH₃Cl and AgSO₃CF₃ were also demonstrated by ¹H NMR titration in CDCl₃. Tris(2-pyridylamide) derivatives cone-3 and cone-7 can complex with n-butyl ammonium ion and silver cation at the same time to form the heteroditopic complexation.     

New force field parameters for metalloproteins I: Divalent copper ion centers including three histidine residues and an oxygen‐ligated amino acid residue

Transition metal ion complexation with proteins is ubiquitous across such diverse fields as neurodegenerative and cardiovascular diseases and cancer. In this study, the structures of divalent copper ion centers including three histidine and one oxygen‐ligated amino acid residues and the relative binding affinities of the oxygen‐ligated amino acid residues with these metal ion centers, which are debated in the literature, are presented. Furthermore, new force field parameters, which are currently lacking for the full‐length metal‐ligand moieties, are developed for metalloproteins that have these centers. These new force field parameters enable investigations of metalloproteins possessing these binding sites using molecular simulations. In addition, the impact of using the atom equivalence and inequivalence atomic partial charge calculation procedures on the simulated structures of these metallopeptides, including hydration properties, is described. © 2014 Wiley Periodicals, Inc.     

Highly selective ferric ion sorption and exchange by crystalline metal phosphonates constructed from tetraphosphonic acids

With the motivation of searching for highly selective ferric ion sorbents, two open-framework and microporous materials, {[Pb7(HEDTP)2(H2O)] x 7H2O}n (1) and {[Zn2(H4EDTP)] x 2H2O}n (2) [H8EDTP = N,N,N',N'-ethylenediaminetetrakis(methylenephosphonic acid)], have been synthesized and structurally characterized. The structure of compound 1 results from the seven crystallographically different lead atoms that are bridged by two HEDTP(7-) ligands to yield a three-dimensional microporous framework with tunnels along the a and b axes. Compound 2 features a layer architecture built of square waves along the a axis. The layers are connected by hydrogen bonds between uncoordinated phosphonate oxygen atoms to form a three-dimensional supramolecular network, with one-dimensional tunnels along the a axis. Both compounds 1 and 2 exhibited high ion sorption and exchange capacities for millimolar concentrations of Fe(III). Specifically, when 0.01 g of 1 (or 2) was added to 5 mL of a 1 mM metallic chloride aqueous solution and the mixture was allowed to stand for 2 days at room temperature, compound 1 adsorbed nearly 100% of Fe(III) and compound 2 adsorbed 96.8% of Fe(III). They were also found to adsorb ferric ions selectively over other metal ions, such as Ca(II), Cr(II), Mn(II), Cu(II), Zn(II), Cd(II), etc. Their special ferric ion uptake capacities may be attributed to the cation exchange, coordination bonding, and electrostatic attraction between ferric ions and metal phosphonates.     

Cation complexation with p-tert-butylcalix[5]arene pentacarboxylic acid derivative: an allosteric regulation of the first metal ion for stepwise extraction of the second ion

A calix[5]arene based solvent extraction reagent 3, appending carboxylic acid groups at the lower rim, has been developed and its complexation behavior towards some transition metal ions has been studied. The host 3 can selectively and quantitatively extract Pb(II) ions above pH 1.8 while other divalent ions such as Cu(II), Zn(II), Co(II), Ni(II) are extracted quantitatively only above pH 3.0. The outstanding Pb(II) selectivity of 3 comes from the size fit complementarity effect of the Pb(II) ion in the calix[5]arene cavity. One molecule of 3 extracts two Pb(II) ions in a stepwise manner. The first Pb(II) ion is extracted into the deep cavity of the calix[5]arene defined by phenoxy oxygen atoms. The first complexed Pb(II) ion acts as a template to bring the host into a cone conformation and induces a positive allosteric effect for the extraction of the second Pb(II) ion at an oxygen rich coordinating site composed of carboxyl groups. Both the Pb(II) ions are extracted through an ion exchange mechanism and the electroneutral complex in the organic phase is formed by the release of an equivalent number of hydrogen ions into aqueous solution. The loaded Pb(II) is easily back-extracted from Pb(II)-complexed 3 using dilute acid solution.     

Spectroscopic studies of bimetallic complexes derived from tridentate or tetradentate Schiff bases of some di- and tri-valent transition metals

Two series of new binuclear complexes with Schiff base ligands, H(4)L(a) or H(2)L(b), derived from the reaction of 4,6-diacetylresorcinol and ethylenediamine, in the molar ratio 1:1 and 1:2 have been prepared, respectively. The two ligands react with Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Cr(III) and Fe(III)-nitrates to get binuclear complexes. The ligands were characterized by elemental analysis, IR, UV-vis, (1)H NMR and mass spectra. The complexes were synthesized by direct and template methods. Different types of products were obtained for the same ligand and metal salts according to the method of preparation. The H(4)L(a) ligand behaves as a macrocyclic tetrabasic with two N(2)O(2) sits, while the H(2)L(b) ligand behaves as a dibasic with two N(2)O sites. The H(4)L(a) ligand is a compartmental ligand which hosts the two metal ions at the centers of two cis-N(2)O(2) sites, while the metal complexes of H(2)L(b) ligand are binuclear, where the ligand hosts two metal ions at the centers of two N(2)O sites. In both cases, deprotonation of the hydrogen atoms of the phenolic OH groups occur except in the case of the Ni(II), Fe(III) and Cr(III) complexes. Electronic spectra and magnetic moments of the complexes indicate that the geometries of the metal centers are either octahedral or tetrahedral. The structures are consistent with the IR, UV-vis, ESR, (1)H NMR, mass spectra, and thermal gravimetric analysis (TGA/DTA) as well as conductivity and magnetic moment measurements.     

Coordination properties of cyclam (1,4,8,11-tetraazacyclotetradecane) endowed with two methylphosphonic acid pendant arms in the 1,4-positions

The title ligand, 1,4,8,11-tetraazacyclotetradecane-1,4-diyl-bis(methylphosphonic acid) (H4te2p1,4, H4L), was prepared by an optimized synthetic approach and its complexing properties towards selected metal ions were studied by means of potentiometry. The ligand forms a very stable complex with copper(II) (log beta(CuL) = 27.21), with a high selectivity over binding of other metal ions (e.g. log beta(ZnL) = 20.16, log beta(NiL) = 21.92). The crystal structures of two intermediates in the ligand synthesis and two forms of the nickel(II) complex (obtained by crystallization at different pH) were determined. From acid solution, the crystals of trans-O,O-[Ni(H3L)]Cl.H2O were isolated. In such complex species, one phosphonate pendant arm is double- and the second arm is monoprotonated. The isolation of such species demonstrates a high kinetic inertness of the complex. The central metal ion is surrounded by four in-plane nitrogen atoms (in the ring configuration III) and two oxygen atoms of pendant moieties in the apical positions of octahedral coordination sphere. From neutral solution, the crystals of (trans-O,O-[Ni(H2L)])3.5H2O were isolated. The molecular structures of the complex units found in this structure are analogous to that found in trans-O,O-[Ni(H3L)]Cl.H2O.