Continuous-flow fast atom bombardment mass spectrometry of oligonucleotides

Although frit-fast atom bombardment (frit-FAB) and continuous-flow FAB mass spectrometry have become standard methods for the analysis of peptides and peptide mixtures, these techniques have not been applied previously to the analysis of oligonucleotides. Mobilephase composition, flow rate, and sample size were optimized for the analysis of oligonucleotides by negative ion frit-FAB mass spectrometry (a type of continuous-flow FAB mass spectrometry). With a mobile phase consisting of methanol/water/triethanolamine (80:20:0.5, v/v/w), flow injection frit-FAB analysis of oligonucleotides showed lower limits of detection compared to standard probe FAB mass spectrometry. For example, in order to obtain a signal-to-noise ratio of 3:1, 38 prnol of d(GTIAAC) were required for frit-FAB mass spectrometry and 62 pmol were required for standard probe FAB mass spectrometry. The largest difference between frit-FAB and standard probe FAB was observed for d(pC)₅, for which the limit of detection by frit-FAB was approximately 11-fold lower than by standard FAB mass spectrometry. Adjustment of the mobile phase to pH 7 with trifluoroacetic acid increased the limit of detection (reduced sensitivity) a minimum of sixfold. Equimolar mixtures of two or three oligonucleotides produced deprotonated molecules in identical relative abundances whether analyzed by frit-FAB or standard probe FAB mass spectrometry. Finally, frit-FAB liquid chromatography mass spectrometry was demonstrated by separating mixtures of oligonucleotides on a β -cyclodextrin high-performance liquid chromatography column with a mobile phase containing methanol, water, and triethanolamine.     

Use of MALDI-TOF mass spectrometry to monitor solid-phase synthesis of oligonucleotides

MALDI-TOF mass spectrometry has been used to characterize solid-supported oligonucleotides containing natural and non-natural and non-nucleoside moieties and a variety of internucleosidic linkages including phosphate and phosphite triesters and H-phosphonate diesters. This technique was used to follow the reactions involved in oligonucleotide synthesis; this enabled direct control of the elongation and optimization of the coupling process.     

Analysis of nucleosides,nucleotides and oligonucleotides using fast atom bombardment mass spectrometry

Mass spectrometry, especially fast atom bombardment mass spectrometry, is playing an ever increasing role in the identification of naturally occurring and synthetic nucleic acid components. Practical applied aspects of this technique are discussed using examples taken from the recent literature describing the mass spectral analysis of nucleosides, nucleotides and oligonucleotides.     

Structural analysis of O-glycopeptides employing negative- and positive-ion multi-stage mass spectra obtained by collision-induced and electron-capture dissociations in linear ion trap time-of-flight mass spectrometry

Structural analyses of various glycans attached to proteins and peptides are highly desirable for elucidating their biological roles. An approach based on mass spectrometry (MS) combining both collision-induced dissociation (CID) and electron-capture dissociation (ECD) in the positive- and negative-ion modes has been proposed as a simple and direct method of assigning an O-glycan without releasing it from the peptide and of determining the amino acid sequence of the peptide and glycosylation site. The instrument used is an electrospray ionization (ESI) linear ion trap (LIT) time-of-flight (TOF) mass spectrometer with tandem LITs for CID by He gas and ECD. The proposed approach was tested with two synthetic O-glycopeptides binding a sialyl Lewis x (sLe(x)) oligosaccharide and a 3'-sialyl N-acetyllactosamine (3'-SLN) on a serine (S) residue. In the negative-ion mode, the CID MS(2) spectra of O-glycopeptides showed a relatively abundant glycoside-bond cleavage between the core N-acetylglucosamine (GlcNAc) and serine (S) that yields deprotonated C(3)-type fragment ions of O-glycan and deprotonated Z(0)-type peptide ions. The structure of the sLe(x) (3'-SLN) oligosaccharide was simply assigned by comparing the CID MS(3) spectrum derived from the C(3)-type fragment ion with the CID MS(2) spectra of the sLe(x) and sLe(a) (3'- and 6'-SLN) standards (i.e., negative-ion MS(n) spectral matching). The amino acid sequence of the peptide including the glycosylation site was determined from the ECD MS(2) spectrum in the positive-ion mode.     

Investigating quantitation of phosphorylation using MALDI-TOF mass spectrometry

Despite advances in methods and instrumentation for analysis of phosphopeptides using mass spectrometry, it is still difficult to quantify the extent of phosphorylation of a substrate because of physiochemical differences between unphosphorylated and phosphorylated peptides. Here we report experiments to investigate those differences using MALDI-TOF mass spectrometry for a set of synthetic peptides by creating calibration curves of known input ratios of peptides/phosphopeptides and analyzing their resulting signal intensity ratios. These calibration curves reveal subtleties in sequence-dependent differences for relative desorption/ionization efficiencies that cannot be seen from single-point calibrations. We found that the behaviors were reproducible with a variability of 5-10% for observed phosphopeptide signal. Although these data allow us to begin addressing the issues related to modeling these properties and predicting relative signal strengths for other peptide sequences, it is clear that this behavior is highly complex and needs to be further explored.     

Detection of hydrogen-bonded adenine-thymine base-pair complexes by electrospray mass spectrometry

Abstract

Bibracchial lariat ether compounds having three-carbon sidearms terminated in either adenine or thymine have the potential to form a molecular box in which the “ends” are crown ethers and the “sides” are hydrogen-bonded base pairs. Previous solution studies relying upon NMR and vapor pressure osmometry confirmed the formation of complexes. In the present study, four diaza-18-crown-6 derivatives having either one or two sidearms each terminated in either adenine or thymine have been studied in a mixture of CHCl₃ and CH₃OH. Either acetic acid or sodium chloride was added to the solutions. For the two-armed systems, the preferred complex was the dimer involving adenines on one monomer and thymines on the other. Homodimers and other complexes were detected as well. The preferred single-armed complex was that occurring between the monomer whose sidearm was terminated in thymine and either H⁺ or Na⁺.     

ZnS nanomaterial characterization by MALDI-TOF mass spectrometry

We present a methodology for mass and size dispersity analysis by MALDI-TOF mass spectrometry of lyothermally grown 2.5-3.7 nm ZnS nanocrystals having a Zn blende crystal structure. These results correlate with information obtained by TEM and absorption spectroscopy. The use of MS methods to probe size and size dispersity provides a convenient method to rapidly analyze II-VI materials at the nanoscale. We believe these results represent the first mass spectrometric analysis of size and size dispersities on II-VI nanocrystals.     

Different behavior of dextrans in positive-ion and negative-ion mass spectrometry

A mass spectrometric (MS) comparative study of dextran samples using two different ionization techniques (matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI)) in both positive- and negative-ion modes is reported. The experiments were carried out with two polydisperse dextrans (1000 and 8800 Da) and isomaltotriose. In the positive-ion mode, the expected alkali metal ion adducts of dextrans were observed in both techniques. In contrast, the expected preferential formation of deprotonated molecules [M - H](-) was not confirmed in negative mode MALDI time-of-flight (TOF) MS, where the series of ions [M(x)- H +42](-) or [M(x+1)- H - 120](-), coming either from some addition or fragmentation, were observed. In both ionization techniques, these ions formed the main distributions of dextrans in the negative-ion mode. It seems that the negative molecular ions formed from the alpha1 --> 6 linkage of polyglucose oligomers easily decompose, and the product ions [M - H - 120](-) markedly dominate. The fragmentation experiments and especially the investigation of the fundamental role of the nozzle-skimmer potential in ESI-MS supported our explanation of the observed behavior because its higher values caused higher fragmentation. The experiments with isomaltotriose excluded any addition of 42 Da during the MS procedures, which is not distinguishable from the loss of 120 Da in the case of polydisperse dextrans. MALDI-TOFMS was found to be more sensitive for the detection of higher oligosaccharides and ESI-MS more useful for structural studies.     

Characterization of natural wax esters by MALDI-TOF mass spectrometry

The applicability of matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS) to the analysis of wax esters (WEs) was investigated. A series of metal salts of 2,5-dihydroxybenzoic acid (DHB) was synthesized and tested as possible matrices. Alkali metal (Li, Na, K, Rb, Cs) and transition metal (Cu, Ag) salts were studied. The matrix properties were evaluated, including solubility in organic solvents, threshold laser power that should be applied for successful desorption/ionization of WEs, the nature of the matrix ions and the mass range occupied by them, and the complexity of the isotope clusters for individual metals. Lithium salt of dihydroxybenzoic acid (LiDHB) performed the best and matrices with purified lithium isotopes ((6)LiDHB or (7)LiDHB) were recommended for WEs. Three sample preparation procedures were compared: (1) mixing the sample and matrix in a glass vial and deposition of the mixture on a MALDI plate (Mix), (2) deposition of sample followed by deposition of matrix (Sa/Ma), and (3) deposition of matrix followed by deposition of sample (Ma/Sa). Morphology of the samples was studied by scanning electron microscopy. The best sample preparation technique was Ma/Sa with the optimum sample to matrix molar ratio 1 : 100. Detection limit was in the low picomolar range. The relative response of WEs decreased with their molecular weight, and minor differences between signals of saturated and monounsaturated WEs were observed. MALDI spectra of WEs showed molecular adducts with lithium [M + Li](+). Fragments observed in postsource decay (PSD) spectra were related to the acidic part of WEs [RCOOH + Li](+) and they were used for structure assignment. MALDI with LiDHB was used for several samples of natural origin, including insect and plant WEs. A good agreement with GC/MS data was achieved. Moreover, MALDI allowed higher WEs to be analyzed, up to 64 carbon atoms in Ginkgo biloba leaves extract.     

Rapid drug-screening of clandestine tablets by MALDI-TOF mass spectrometry

A novel method for the rapid screening of clandestine tablets for drugs by MALDI-TOF mass spectrometry is described. In this method, cetrimonium bromide (CTAB), a surfactant, is added to the conventional α-cyano-4-hydroxycinnamic acid (CHCA) matrix solution used in preparing the MALDI samples. This procedure allows very clean mass spectra to be collected for amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine (MDA), 3,4-methylenedioxymethamphetamine (MDMA), caffeine, ketamine and tramadol. The method was used successfully in the rapid drug-screening of some actual clandestine tablets, which had been seized from the illicit market, and can serve as a good complementary method to GC/MS for use in forensic analysis.     

Proteomic profiling of a snake venom using high mass detection MALDI-TOF mass spectrometry

Proteomic profiling involves identification and quantification of protein components in complex biological systems. Most of the mass profiling studies performed with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) have been restricted to peptides and small proteins (<20 kDa) because the sensitivity of the standard ion detectors decreases with increasing ion mass. Here we perform a protein profiling study of the snake venom Sistrurus miliarius barbouri, comparing 2D gel electrophoresis and reversed-phase high-performance liquid chromatography (HPLC) with a high mass cryodetector MALDI-TOF instrument (Macromizer), whose detector displays an uniform sensitivity with mass. Our results show that such MS approach can render superior analysis of protein complexity compared with that obtained with the electrophoretic and chromatographic approaches. The summation of ion impacts allows relative quantification of different proteins, and the number of ion counts correlates with the peak areas in the reversed-phase HPLC. Furthermore, the sensitivity reached with the high mass cryodetection MS technology clearly exceeds the detection limit of standard high-sensitivity staining methods.     

Characterization of labeled oligonucleotides using enzymatic digestion and tandem mass spectrometry

A simple and powerful method for the determination of labeling sites on oligodeoxynucleotides (ODN) has been developed. The method is based on the finding that nuclease P1 (NP1) digestions of label-containing ODNs produce site-specific products: 5′-labeled ODNs produce label-nucleotide (L-N); 3′-labeled ODN produces phosphorylated label (pL); and a label in between the ODN termini produces pL-N. Mass spectrometry spectra of these products from the digestion mixture can be easily utilized for structural verification of labeled ODNs such as DNA probes. We also developed a method for the determination of the labeling sites of ODNs with unknown label structures. In this method, NP1 digestion products generate site-specific fragmentation patterns upon collision-induced dissociation. These patterns can be easily recognized and used for the identification of labeling sites of ODNs with unknown label structures. When an ODN is internally labeled, phosphodiesterase digestion may be used to determine the exact labeling site (sequence location). It was demonstrated that these methods can be applied for ODNs with single or multiple labels, and for ODNs with the same or different labels within an ODN.     

Ionic-liquid matrices for quantitative analysis by MALDI-TOF mass spectrometry

Ionic liquid matrices (ILMs) were tested as MALDI matrices for quantification of oligodeoxynucleotides (ODNs), peptides, and small proteins. Good calibrations with high linearity and reproducibility were achieved over a broad concentration range for all the tested ILMs in spite of their different physical states. However, the standard deviation is higher for ILMs that are solid with visible crystals. The experimental results indicate various ILMs have different sensitivity owing to changes in their cation components. More importantly, we found that the slopes of the calibration curves correlate with the inverse of the peptide molecular weights, presenting an opportunity to predict a priori, the relative sensitivities (slopes of calibration plots) for various analytes that have similar hydrophobicites.     

Molecular weight determination of underivatized oligodeoxyribonucleotides by positive-ion matrix-assisted ultraviolet laser-desorption mass spectrometry

A Wiley-McLaren type time-of-flight mass spectrometer has been used for molecular weight measurements of several unprotected oligodeoxyribonucleotides using matrix-assisted UV laser desorption. Approximately 10 to 100 pmol of sample was required for recording their positive-ion mass spectra with a mass resolution in the range of 150 to 300 (Full width at half maximum) (FWHM). Little fragmentation was observed.     

Solvent effect in polymer analysis by MALDI-TOF mass spectrometry

Solvent effect is one of the important factors in sample preparation which may affect matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectra of synthetic polymers. MALDI imaging, a useful imaging tool for discovering biomarkers in tissues, is applied here for better comprehension of solvent effect in polymer analysis by MALDI-TOF mass spectrometry. Nylon-6 was chosen as a model polymer for the study of solvent effect. Its MALDI mass spectra in different solvents were performed. MALDI imaging analysis was performed for studying the incorporation of analytes into matrix crystals in different solvent combinations. Specifically, the colocalization of matrix and analyte was obtained through Pearson’s correlation (PC) coefficient analysis of their MALDI images. The results demonstrated that satisfactory spectra were obtained in higher PC value conditions. PC decreased along with an increase in the ratio of poor solvent, which suggested that we should minimize the poor solvent ratio to obtain better MALDI spectra.     

Unusual odd-electron fragments from even-electron protonated prodiginine precursors using positive-ion electrospray tandem mass spectrometry

Reports of anticancer and immunosuppressive properties have spurred recent interest in the bacterially produced prodiginines. We use electrospray tandem mass spectrometry (ES-MS/MS) to investigate prodigiosin, undecylprodiginine, and streptorubin B (butyl-meta-cycloheptylprodiginine) and to explore their fragmentation pathways to explain the unusual methyl radical loss and consecutive fragment ions that dominate low-energy collision-induced dissociation (CID) mass spectra. The competition between the formation of even-electron ions and radical ions is examined in detail. Theoretical calculations are used to optimize the structures and calculate the energies of both reactants and products using the Gaussian 03 program. Results indicate that protonation occurs on the nitrogen atom that initially held no hydrogen, thus allowing formation of a pseudo-seven-membered ring that constitutes the most stable ground state [M + H](+) structure. From this precursor, experimental data show that methyl radical loss has the lowest apparent threshold but, alternatively, even-electron fragment ions can be formed by loss of a methanol molecule. Computational modeling indicates that methyl radical loss is the more endothermic process in this competition, but the lower apparent threshold associated with methyl radical loss points to a lower kinetic barrier. Additionally, this characteristic and unusual loss of methyl radical (in combination with weaker methanol loss) from each prodiginine is useful for performing constant neutral loss scans to quickly and efficiently identify all prodiginines in a complex biological mixture without any clean-up or purification. The feasibility of this approach has been proven through the identification of a new, low-abundance prodigiosin analog arising from Hahella chejuensis.     

Kinetic analysis of cyclic CMP-specific and multifunctional phosphodiesterases by quantitative positive-ion fast-atom bombardment mass spectrometry

Two enzymes, cyclic CMP-specific phosphodiesterase and multifunctional phosphodiesterase, are responsible for the hydrolysis of cytidine 3',5'-cyclic monophosphate in living cells. Quantitation of both enzymes has been carried out by positive-ion fast-atom bombardment mass spectrometric analysis of the enzyme incubates after termination of the reaction. The kinetic data obtained are in close agreement with parallel data obtained by the conventional radiometric assay. The extra facility of the mass spectrometry based assay to monitor several incubation components simultaneously has been exploited to study the concurrent hydrolysis of alternate cyclic nucleotide substrates and provides kinetic parameters of significance in interpreting substrate-enzyme interactions. This is extended by the use of collisionally-induced dissociation of the protonated molecules of the liberated products to identify the mononucleotide isomers resulting from the cyclic nucleotide hydrolysis.     

Characterization of synthesized titanium oxide nanoclusters by MALDI-TOF mass spectrometry

Titania represents an important material that has wide applications. The bactericidal efficiency of TiO(2) has been shown to be dependent on the size of the nanoparticles, so it is important to be able to reliably estimate their dimensions. In this study, a stable TiO(2) cluster suspension is produced by the thermal solvent process, and ultrasmall clusters (<1 nm) with different sizes are obtained by size-selection treatment. MALDI-TOF-MS and LDI-TOF-MS are shown to be useful for characterization of these ultrasmall nanoparticles. Peak maxima are found to correlate with nanoparticle size, and the possibility of using these mass spectrometry-based approaches to estimate nanoparticle size is affirmed. The size distributions of TiO(2) nanoparticles obtained from MALDI- and LDI-TOF-MS are in good agreement with parallel TEM observations. Finally, PSD analysis of inorganic nanomaterials is performed and valuable information about the structure of analytes has been obtained.