Electrochemistry and biosensing of glucose oxidase based on mesoporous carbons with different spatially ordered dimensions

A strategy of protein entrapment within mesoporous carbon matrices is demonstrated to probe the electrochemistry of glucose oxidase. Large surface area and remarkable electro-catalytic properties of carbon mesoporous materials make them suitable candidates for high loading of protein molecules and the promotion of heterogeneous electron transfer. In this work, two kinds of mesoporous carbon nanocomposite films were designed and prepared with highly ordered two-dimensional (2D) and three-dimensional (3D) structures for the immobilization of glucose oxidase, in which the quasi-reversible electron transfer of the redox enzyme was probed, and the apparent heterogeneous electron transfer rate constants () are 3.9 and 4.2 s⁻¹, respectively. Furthermore, the associated biocatalytic activity was also revealed. Highly ordered 3D-mesoporous carbon material exhibited larger adsorption capacity for glucose oxidase and the immobilized enzymes retained a higher bioactivity compared with 2D-mesoporous carbons. The preparation of protein-entrapped mesoporous carbon nanocomposites expands the scope of carbon-based electrochemical devices and opens a new avenue for the development of biosensors.     

Electrochemistry and biosensing activity of cytochrome c immobilized on a mesoporous interface assembled from carbon nanospheres

We report on an amperometric biosensor for hydrogen peroxide. It is obtained via layer-by-layer assembly of ordered mesoporous carbon nanospheres and poly(diallyldimethylammonium) on the surface of an indium tin oxide (ITO) glass electrode and subsequent adsorption of cytochrome c. UV–vis absorption spectroscopy was applied to characterize the process of forming the assembled layers. Cyclic voltammetry revealed a direct and quasi-reversible electron transfer between cytochrome c and the surface of the modified ITO electrode. The surface-controlled electron transfer has an apparent heterogeneous electron-transfer rate constant (k _s ) of 5.9?±?0.2?s^?1 in case of the 5-layer electrode. The biosensor displays good electrocatalytic response to the reduction of H₂O₂, and the amperometric signal increase steadily with the concentration of H₂O₂ in the range from 5?μM to 1.5?mM. The detection limit is 1?μM at pH 7.4. The apparent Michaelis-Menten constant (K _m ) of the sensor is 0.53?mM. We assume that the observation of a direct electron transfer of cytochrome c on mesoporous carbon nanospheres may form the basis for a feasible approach for durable and reliable detection of H₂O₂.

Direct electrochemistry and biocatalysis of glucose oxidase immobilized on magnetic mesoporous carbon

A magnetic mesoporous carbon material (i.e., mesoporous iron oxide/C, mesoFe/C) is synthesized for protein immobilization, using glucose oxidase (GOx) as model. Transmission electron microscopy images show that mesoFe/C has highly ordered porous structure with uniform pore size, and iron oxide nanoparticles are dispersed along the wall of carbon. After adsorption of GOx, the GOx-mesoFe/C composite is separated with magnet. The immobilized GOx remains its natural structure according to the reflection–absorption infrared spectra. When the GOx-mesoFe/C composite is coated on a Pt electrode surface, the GOx gives a couple of quasireversible voltammetric peaks at −0.5 V (vs. saturated calomel electrode) due to the redox of FAD/FADH₂. The electron-transfer rate constant (k _s) is ca. 0.49 s⁻¹. The modified electrode presents remarkably amperometric response to glucose at 0.6 V. The response time (t _95%) is less than 6 s; the response current is linear to glucose concentration in the range of 0.2–10 mM with a sensitivity of 27 μA mM⁻¹ cm⁻². The detection limit is 0.08 mM (S/N = 3). The apparent Michaelis–Menten constant (K _m^app) of the enzyme reaction is ca. 6.6 mM, indicating that the GOx immobilized with mesoFe/C has high affinity to the substrate.     

Direct electrochemistry and reagentless biosensing of glucose oxidase immobilized on chitosan wrapped single-walled carbon nanotubes

Single-walled carbon nanotubes (SWCNTs) selectively wrapped by a water-soluble, environmentally friendly, biocompatible polymer chitosan (CHI) were employed for the construction of a bioelectrochemical platform for the direct electron transfer (DET) of glucose oxidase (GOD) and biosensing purposes. Scanning electron microscopy and Raman spectroscopy were used to investigate the properties of the SWCNT-CHI film. The results show that the preferentially wrapped small-diameter SWCNTs are dispersed within the CHI film and exist on the surface of the electrode as small bundles. The DET between GOD and the electrode surface was observed with a formal potential of about ca. -460 mV vs. SCE in phosphate buffer solution. The heterogeneous electron transfer rate constant and the surface coverage of GOD are estimated to be 3.0 s(-1) and 1.3 x 10(-10)mol/cm(2), respectively. The experimental results demonstrate that the immobilized GOD retains its catalytic activity towards the oxidation of glucose. Such a GOD/SWCNT-CHI film-based biosensor not only exhibits a rapid response time, a wide linear rang and a low detection limits at a detection potential of -400 mV but also shows the effective anti-interference capability. Significantly improved analytical capabilities of the GOD/SWCNT-CHI/GC electrode could be ascribed to the unique properties of the individual SWCNTs and to the biocompatibility of CHI.     

Direct electrochemistry of glucose oxidase immobilized on NdPO4 nanoparticles/chitosan composite film on glassy carbon electrodes and its biosensing application

The direct electrochemistry of glucose oxidase (GOx) immobilized on a composite matrix based on chitosan (CHIT) and NdPO(4) nanoparticles (NPs) underlying on glassy carbon electrode (GCE) was achieved. The cyclic voltammetry and electrochemical impedance spectroscopy were used to characterize the modified electrode. In deaerated buffer solutions, the cyclic voltammetry of the composite films of GOx/NdPO(4) NPs/CHIT showed a pair of well-behaved redox peaks that are assigned to the redox reaction of GOx, confirming the effective immobilization of GOx on the composite film. The electron transfer rate constant was estimated to be 5.0 s(-1). The linear dynamic range for the detection of glucose was 0.15-10 mM with a correlation coefficient of 0.999 and the detection limit was estimated at about 0.08 mM (S/N=3). The calculated apparent Michaelis-Menten constant was 2.5 mM, which suggested a high affinity of the enzyme-substrate. The immobilized GOx in the NdPO(4) NPs/CHIT composite film retained its bioactivity. Furthermore, the method presented here can be easily extended to immobilize and obtain the direct electrochemistry of other redox enzymes or proteins.     

Direct electrochemistry of glucose oxidase immobilized on a hexagonal mesoporous silica-MCM-41 matrix

The direct electrochemistry of glucose oxidase (GOD) immobilized on a hexagonal mesoporous silica modified glassy carbon electrode was investigated. The adsorbed GOD displayed a pair of redox peaks with a formal potential of -417 mV in 0.1 M pH 6.1 phosphate buffer solution (PBS). The response showed a diffusion-controlled electrode process with a two-electron transfer coupled with a two-proton transfer reaction process. GOD immobilized on a hexagonal mesoporous silica retained its bioactivity and stability. In addition, the immobilized GOD could electrocatalyze the oxidation of glucose to gluconlactone by taking ferrocene monocarboxylic acid (FMCA) as a mediator in N(2) saturated solutions, indicating that the electrode may have the potential application in biosensors to analyze glucose. The sensor could exclude the interference of commonly coexisted uric acid, p-acetaminophenol and ascorbic acid and diagnose diabetes very fast and sensitively. This work demonstrated that the mesoporous silica provided a novel matrix for protein immobilization and the construction of biosensors.     

Electrochemistry and biosensing activity of cytochrome c immobilized in macroporous materials

An amperometric biosensor for hydrogen peroxide (H₂O₂) has been constructed by immobilizing cytochrome c on an indium/tin oxide (ITO) electrode modified with a macroporous material. Cyclic voltammetry showed that the direct and quasi-reversible electron transfer of cytochrome c proceeds without the need for an electron mediator. A surface-controlled electron transfer process can be observed with an apparent heterogeneous electron-transfer rate constant (k_s) of 29.2?s^?1. The biosensor displays excellent electrocatalytic responses to the reduction of H₂O₂ to give amperometric responses that increase steadily with the concentration of H₂O₂ in the range from 5???M to 2?mM. The detection limit is 0.61???M at pH?7.4. The apparent Michaelis-Menten constant (K_m) of the biosensor is 1.06?mM. This investigation not only provided a method for the direct electron transfer of cytochrome c on macroporous materials, but also established a feasible approach for durable and reliable detection of H₂O₂.

Amperometric glucose sensor based on glucose oxidase immobilized on gelatin-multiwalled carbon nanotube modified glassy carbon electrode

We investigated the direct electrochemistry of glucose oxidase (GOx) at gelatin-multiwalled carbon nanotube (GCNT) modified glassy carbon electrode (GCE). GOx was covalently immobilized onto GCNT modified GCE through the well known glutaraldehyde (GAD) chemistry. The immobilized GOx showed a pair of well-defined reversible redox peaks with a formal potential (E⁰′) of ? 0.40 V and a peak to peak separation (ΔE_p) of 47 mV. The surface coverage concentration (Г) of GOx in GCNT/GOx/GAD composite film modified GCE was 3.88 × 10^? 9 mol cm^? 2 which indicates the high enzyme loading. The electron transfer rate constant (k_s) of GOx immobilized onto GCNT was 1.08 s^? 1 which validates a rapid electron transfer processes. The composite film shows linear response towards 6.30 to 20.09 mM glucose. We observed a good sensitivity of 2.47 μA mM^?1 cm^? 2 for glucose at the composite film. The fabricated biosensor displayed two weeks stability. Moreover, it shows no response to 0.5 mM of ascorbic acid (AA), uric acid (UA), acetaminophen (AP), pyruvate (PA) and lactate (LA) which shows its potential application in the determination of glucose from human serum samples. The composite film exhibits excellent recovery for glucose in human serum at physiological pH with good practical applicability.     

Direct electrochemistry of glucose oxidase immobilized on porous carbon nanofiber/room temperature ionic liquid/chitosan composite film and its biosensing application

The direct electron transfer of glucose oxidase (GOD) immobilized on a composite matrix based on porous carbon nanofibers (PCNFs), room-temperature ionic liquid (RTIL), and chitosan (CHIT) underlying on a glassy carbon electrode was achieved. The combination of the PCNFs, RTIL, and CHIT provided a suitable microenvironment for GOD to transfer electron directly. In deaerated buffer solutions (pH 7.0), the cyclic voltammetry of the GOD/PCNFs/RTIL/CHIT composite films showed a pair of well-defined redox peaks with the formal potential of −0.45 V (vs. SCE). The synergistic effort of the PCNFs, RTIL, and CHIT also promoted the stability of GOD in the composite film and retained its bioactivity.     

Glucose biosensor based on glucose oxidase immobilized on a nanofilm composed of mesoporous hydroxyapatite, titanium dioxide, and modified with multi-walled carbon nanotubes

We report on a highly sensitive glucose biosensor that was fabricated from a composite made from mesoporous hydroxyapatite and mesoporous titanium dioxide which then were ultrasonically mixed with multi-walled carbon nanotubes to form a rough nanocomposite film. This film served as a platform to immobilize glucose oxidase onto a glassy carbon electrode. The morphological and electrochemical properties of the film were examined by scanning electron microscopy and electrochemical impedance spectroscopy. Cyclic voltammetry and chronoamperometry were used to characterize the electrochemical performances of the biosensor which exhibited excellent electrocatalytic activity to the oxidation of glucose. At an operating potential of 0.3?V and pH 6.8, the sensor displays a sensitivity of 57.0?μA?mM^?1?cm^?2, a response time of <5?s, a linear dynamic range from 0.01 to 15.2?mM, a correlation coefficient of 0.9985, and a detection limit of 2?μM at an SNR of 3. No interferences are found for uric acid, ascorbic acid, dopamine and most carbohydrates. The sensor is stable and was successfully applied to the determination of glucose in real samples.

Analytical use of immobilized glucose oxidase

With the aim of immobilizing glucose oxidase (GO) for routine determination of glucose, a covalent bond immobilization method on titanium (IV) chloride activated silica supports was used (1). Several parameters were studied in order to optimize the residual activity upon immobilization and during operation. The immobilized enzyme can be reutilized at 25°C for several h a day alternating with storage (4°C) for at least 3,300 h.     

Electrochemistry and electrocatalysis of polyoxometalate-ordered mesoporous carbon modified electrode

In this work, we have developed a convenient and efficient method for the functionalization of ordered mesoporous carbon (OMC) using polyoxometalate H₆P₂Mo₁₈O₆₂·xH₂O (P₂Mo₁₈). By the method, glassy carbon (GC) electrode modified with P₂Mo₁₈ which was immobilized on the channel surface of OMC was prepared and characterized for the first time. The large specific surface area and porous structure of the modified OMC particles result in high heteropolyacid loading, and the P₂Mo₁₈ entrapped in this order matrix is stable. Fourier transform infrared spectroscopy (FTIR), nitrogen adsorption-desorption isotherm and X-ray diffraction (XRD) were employed to give insight into the intermolecular interaction between OMC and P₂Mo₁₈. The electrochemical behavior of the modified electrode was studied in detail, including pH-dependence, stability and so on. The cyclic voltammetry (CV) and amperometry studies demonstrated that P₂Mo₁₈/OMC/GC electrode has high stability, fast response and good electrocatalytic activity for the reduction of nitrite, bromate, idonate, and hydrogen peroxide. The mechanism of catalysis on P₂Mo₁₈/OMC/GC electrode was discussed. Moreover, the development of our approach for OMC functionalization suggests the potential applications in catalysis, molecular electronics and sensors.     

Electrochemistry of bilirubin oxidase at carbon nanotubes

In this paper, we compared the direct electron transfer and electrocatalytic properties of bilirubin oxidase (BOD) immobilized at two kinds of carbon nanotubes (CNTs), bamboo-CNTs and uniform-CNTs. X-ray diffraction and X-ray photoelectron spectroscopy results indicated that the ratio of sp² band to sp³ band and the content of oxygen-containing groups at the surface of uniform-CNTs were higher than that of bamboo-CNTs. Moreover, uniform-CNTs can be well separated at the surface of the electrode. Better electrochemical and electrocatalytic properties of BOD immobilized at uniform-CNTs were shown.     

One-step electropolymeric co-immobilization of glucose oxidase and heparin for amperometric biosensing of glucose

Electropolymerization was used for the co-deposition of glucose oxidase and heparin onto metal electrode transducers. Such electropolymeric co-entrapment within a non-conducting poly(1,2-phenylenediamine) (PPD) film imparts both biocatalytic and anticoagulation activities onto the transducer, and greatly improves the performance of the sensor after exposure to whole blood. Essentially identical glucose signals are observed before and after exposure to blood samples. Scanning electron micrographs after such exposure reveal no platelet deposition or formation of a fibrin "clot". The effect of the heparin co-immobilization on the glucose response is examined. Improved biocompatibility is reported also in connection with a needle-type carbon paste biosensor configuration. The simultaneous localization of the enzyme and heparin offers great promise for simplifying the preparation of enzyme electrodes and designing biocompatible implantable glucose biosensors.     

Reversible denaturation behavior of immobilized glucose oxidase

Glucose oxidase (GOD) was immobilized by using glutaraldehyde crosslinking and various stabilizing agents such as BSA, gelatin, lysozyme, and polyethylenimine (PEI). Studies on the denaturation of the soluble as well as immobilized GOD were carried out for 1 h at various concentrations of guanidine hydrochloride (GdmCl) in 50 mM phosphate buffer, pH 6.0 at 25±1°C. The soluble enzyme required a GdmCl concentration of 5M for total activity loss, whereas for GOD immobilized with BSA, gelatin, lysozyme, and heat-inactivated lysozyme, the corresponding GdmCl concentration required was 8 M. GOD immobilized with PEI, however, was more stable and retained 25% activity when denatured for 1 h using 8 M GdmCl. However, after undergoing denaturation for 1 h, GOD immobilized with lysozyme regained 72% original activity within 20 min of renaturation, while GOD immobilized with BSA, PEI, gelatin, and heat-inactivated lysozyme regained only 39, 21, 20, and 25% of activity, respectively. After five cycles of repeated denaturation and renaturation with 8 M GdmCl, GOD immobilized with lysozyme retained 70% of the original activity. Refolding ability of lysozyme, glutaraldehyde crosslinkages between lysozyme and GOD, together with ionic interactions between them, appear to play an important role in the denaturation-renaturation behavior of the immobilized enzyme.     

Frequency response of the glucose sensor based on immobilized glucose oxidase membrane

Frequency response of the glucose sensor based on the immobilized glucose oxidase membrane was investigated experimentally by giving the sinusoidal change of glucose concentration to the glucose sensor and observing its output signal. Observed values of gains and phase lags of the frequency response of the glucose sensor followed the frequency response model of the first-order with dead time; The time constant and also the dead time were estimated and found to decrease as the amount of enzyme immobilized in the membrane increased and the thickness of the membrane decreased.

     

Electrodeposition of a biocompatible hydroxyapatite matrix to immobilize glucose oxidase for sensitive glucose biosensing

Microchimica Acta - The electrochemical quartz crystal microbalance was used to quantitatively examine the electrodeposition of hydroxyapatite (HA) at a gold electrode. Potentiostatic...     

Direct electrochemical sensing of glucose using glucose oxidase immobilized on functionalized carbon nanotubes via a novel metal chelate-based affinity method

We report on a novel amperometric glassy carbon biosensing electrode for glucose. It is based on the immobilization of a highly sensitive glucose oxidase (GOx) by affinity interaction on carbon nanotubes (CNTs) functionalized with iminodiacetic acid and metal chelates. The new technique for immobilization is exploiting the affinity of Co(II) ions to the histidine and cysteine moieties on the surface of GOx. The direct electrochemistry of immobilized GOx revealed that the functionalized CNTs greatly improve the direct electron transfer between GOx and the surface of the electrode to give a pair of well-defined and almost reversible redox peaks and undergoes fast heterogeneous electron transfer with a rate constant (k _s) of 0.59?s^?1. The GOx immobilized in this way fully retained its activity for the oxidation of glucose. The resulting biosensor is capable of detecting glucose at levels as low as 0.01?mM, and has excellent operational stability (with no decrease in the activity of enzyme over a 10?days period). The method of immobilizing GOx is easy and also provides a model technique for potential use with other redox enzymes and proteins.

Biosensors for determination of glucose with glucose oxidase immobilized on an eggshell membrane

A glucose biosensor using an enzyme-immobilized eggshell membrane and oxygen electrode for glucose determination has been fabricated. Glucose oxidase was covalently immobilized on an eggshell membrane with glutaraldehyde as a cross-linking agent. The glucose biosensor was fabricated by positioning the enzyme-immobilized eggshell membrane on the surface of a dissolved oxygen sensor. The detection scheme was based on the depletion of dissolved oxygen content upon exposure to glucose solution and the decrease in the oxygen level was monitored and related to the glucose concentration. The effect of glutaraldehyde concentration, pH, phosphate buffer concentration and temperature on the response of the glucose biosensor has been studied in detail. Common matrix interferents such as ethanol, d-fructose, citric acid, sodium benzoate, sucrose and l-ascorbic acid did not give significant interference. The resulting sensor exhibited a fast response (100 s), high sensitivity (8.3409 mg L⁻¹ oxygen depletion/mmol L⁻¹ glucose) and good storage stability (85.2% of its initial sensitivity after 4 months). The linear response is 1.0×10⁻⁵ to 1.3×10⁻³ mol L⁻¹ glucose. The glucose content in real samples such as commercial glucose injection preparations and wines was determined, and the results were comparable to the values obtained from a commercial glucose assay kit based on a spectrophotometric method.