Metal-free organic dyes with benzothiadiazole as an internal acceptor for dye-sensitized solar cells

We synthesized three metal-free organic dyes (H11–H13) consisting of a 3,6-disubstituted carbazole, benzothiadiazole, and cyanoacrylic acid. All the dyes exhibited high molar extinction coefficients and suitable energy levels for electron transfer from the electrolyte to the TiO₂ nanoparticles. Under standard AM 1.5G solar irradiation, the device using dye H13 with co-adsorbed chenodeoxycholic acid (CDCA) displayed the best performance: an open-circuit voltage (V_oc) of 0.71 V, a short-circuit current density (J_sc) of 12.69 mA cm⁻², a fill factor (FF) of 0.71, and a power conversion efficiency (PCE) of 6.32%. The PCE was ∼79% of that for commercially available N719 cells (8.02%) under the same conditions.     

Synthesis and characterization of organic dyes containing 4,5-diazafluorene as efficient sensitizers for dye-sensitized solar cells

Two dyes which are 4,5-diazafluoren-9-one-derived diimine ligands and their corresponding Ru(II) bipyridine complexes were synthesized. The structures of all compounds were determined by FTIR, UV–Vis, ¹H-NMR, ¹C-NMR, and MS spectroscopic data. The photovoltaic and electrochemical properties of these compounds were investigated and the applicability in DSSCs as photosensitizers was studied. The photovoltaic cell efficiencies (PCE) of the devices were 0.36–1.26% under simulated AM 1.5 solar irradiation of 100 mW/cm², and the highest open-circuit voltage (V_oc) reached 0.34 V. When comparing the photovoltaic performance of DSSC devices, efficiency increases L2 < L2-Ru < L1 < L1-Ru. The PCE value of 1.26% was obtained with a DSSC based on L1-Ru under AM irradiation (100 mW/cm²). DSSC based on L1-Ru produced efficiency of 1.26%, whereas DSSC-based L1 exhibited the device performance with efficiency of 0.84% under illumination. These results show that the availability of a π-conjugated bridge and a richer electron donor for photovoltaic performance of the DSSC provides increased efficiency.     

Coplanar indenofluorene-based organic dyes for dye-sensitized solar cells

A series of new organic dyes, comprising indenofluorene moiety as a conjugated bridge, with an extended π-groups, such as thiophene and furan, diphenylamine as donor, cyanoacrylic acid group as an electron acceptor and anchoring group, have been synthesized. Photophysical and electrochemical measurements, and theoretical computation were carried out on these dyes. Dye-sensitized solar cells (DSSCs) using these dyes as the sensitizers exhibited photocurrent density (J_SC), open-circuit voltage (V_OC), and fill factor (FF) in the range of 6.95–8.20 mA/cm², 0.70–0.71 V, and 0.69–0.71, respectively, corresponding to an overall conversion efficiency of 3.36–4.05%. The best efficiency reached 56% of the standard cell based on N719.     

Highly-efficient metal-free organic dyes for dye-sensitized solar cells

A solar-to-electric conversion efficiency of 6.1% is achieved with this new dye, compared to 6.3% for N3 dye under the same experimental conditions. Although these indoline dyes are slightly less efficient than N3 dye, the cost of indoline dye is much less than for N3 due to ease of preparation. Furthermore, indoline dyes are shown to be highly stable to photoredox processes by cyclic voltammogram.     

New tetrazole-based organic dyes for dye-sensitized solar cells

A series of new metal-free organic dyes that contain donors with triphenylamine or its derivatives and tetrazole-based acceptors were synthesized and characterized by photophysical, electrochemical, and theoretical computational methods. They were applied in nanocrystalline TiO_2 solar cells(DSSCs). It is found that the introduction of diphenylamine units as antennas in the as-synthesized dyes could improve photovoltaic performance compared with phenothiazine and carbazole units as antennas in DSSCs. The dye with(2H-tetrazol-5-yl) acrylonitrile electron acceptor also displayed the highest solar-to-electrical energy conversion efficiency.     

Novel pyrenoimidazole-based organic dyes for dye-sensitized solar cells

A novel class of organic dyes containing pyrenoimidazole donors, cyanoacrylic acid acceptors, and oligothiophene π-linkers has been synthesized and characterized. The electro-optical properties of these dyes can be tuned by changing the conjugation length of the π-linkers. A dye containing terthiophene in the conjugation pathway exhibited a solar energy-to-electricity conversion efficiency of 5.65%.     

Novel organic dyes for efficient dye-sensitized solar cells

Two novel metal-free organic dyes containing thienothiophene and thiophene segments have been synthesized. Nano-crystalline TiO2 dye-sensitized solar cells were fabricated using these dyes as light-harvesting sensitizers, and a high solar energy-to-electricity conversion efficiency of 6.23% was achieved.     

Synthesis of new di-anchoring organic sensitizer based on quinoxaline acceptor for dye-sensitized solar cells

New quinoxaline-based organic sensitizer bearing di-anchoring group for dye-sensitized solar cells (DSSCs) was synthesized from diethyl 4,5-diaminophthaltate, in which was prepared under mild condition by using Takehito’s method. The synthesized sensitizer was compared with mono-anchoring sensitizer through absorption spectra, emission spectra, J-V curve, and IPCE spectra, indicating the di-anchoring group leads to a noticeable improvement of J_sc value owing to more efficient intramolecular charge transfer and channel number increment.     

Synthesis and applications of novel acceptor-donor-acceptor organic dyes with dithienopyrrole- and fluorene-cores for dye-sensitized solar cells

Four novel symmetrical organic dyes (S1-S4) configured with acceptor-donor-acceptor (A-D-A) structures containing electron donating fluorene (S1 and S2) and N-alkyl dithieno[3,2-b:2′,3′-d]pyrrole (DTP) (S3 and S4) cores terminated with two anchoring cyanoacrylic acids (as electron acceptors) were synthesized and applied to dye-sensitized solar cells (DSSCs). The DSSC device based on S2 dye showed the best photovoltaic performance among S1-S4 dyes: a maximum monochromatic incident photon-to-current conversion efficiency (IPCE) of 76%, a short circuit current (J_SC) of 12.27 mA/cm², an open circuit voltage (V_OC) of 0.61 V, a fill factor (FF) of 0.63, and an overall power conversion efficiency (η) of 4.73%. Besides, the utilization of chenodoxycholic acid (CDCA) as a co-adsorbent in the DSSC device based on S3 dye showed a significant improvement in its η value (from 3.70% to 4.31%), which is attributed to the suppression of dye aggregation on TiO₂ surface and thus to increase the J_SC value eventually.     

5-Phenyl-iminostilbene based organic dyes for efficient dye-sensitized solar cells

Four new 5-phenyl-iminostilbene dyes (ISB-3–6) containing electron-withdrawing benzo-[c][1,2,5]thiadiazole have been designed and synthesized for use as DSSCs. Their absorption properties and electrochemical and photovoltaic performances have been investigated systematically. Among these dyes, DSSCs based on a dye containing benzo-[c][1,2,5]thiadiazole and benzene moieties (ISB-4) showed the best performance: a short-circuit photocurrent density (J_sc) of 13.69 mA cm⁻², an open-circuit photovoltage (V_oc) of 722 mV, and a fill factor (FF) of 0.71, which corresponds to a power conversion efficiency (PCE) of 6.71%, under optimized conditions. Additionally, long-term stability of the ISB-4 based DSSCs with ionic-liquid electrolytes was demonstrated under 1000 h of light soaking, the photovoltaic performance is up to 5.75%. The results suggest that 5-phenyl-iminostilbene containing dyes are promising candidates for application in DSSCs.     

Macrocyclic triphenylamine based organic dyes for efficient dye-sensitized solar cells

A novel class of organic D-π-A dyes employing macrocyclic triphenylamine dimer as electron donor was designed and synthesized for dye-sensitized solar cells. The prepared compounds showed high chemical and elelctrochemical stabilities as well as good long-wave absorption. Photovoltaic devices based on these dyes showed high open circuit voltage (higher than that of N3) and achieved a solar energy to electricity conversion efficiency of 6.31%. All the performances indicate the dyes containing macrocyclic triphenylamine dimer is a good candidate for dyes sensitized solar cells.     

Metal-free organic dyes for dye-sensitized solar cells: recent advances

1. Download : Download full-size image

     

Efficient iodine-free dye-sensitized solar cells employing truxene-based organic dyes

Two new truxene-based organic sensitizers (M15 and M16) featuring high extinction coefficients were synthesized for dye-sensitized solar cells employing cobalt electrolyte. The M16-sensitized device displays a 7.6% efficiency at an irradiation of AM1.5 full sunlight.     

Optimizing dyes for dye-sensitized solar cells

Dye-sensitized solar cells (DSSCs) have emerged as an important cheap photovoltaic technology. Charge separation is initiated at the dye, bound at the interface of an inorganic semiconductor and a hole-transport material. Careful design of the dye can minimize loss mechanisms and improve light harvesting. Mass application of DSSCs is currently limited by manufacturing complexity and long-term stability associated with the liquid redox electrolyte used in the most-efficient cells. In this Minireview, dye design is discussed in the context of novel alternatives to the standard liquid electrolyte. Rapid progress is being made in improving the efficiencies of such solid and quasi-solid DSSCs which promises cheap, efficient, and robust photovoltaic systems.     

Co-sensitization of organic dyes for efficient ionic liquid electrolyte-based dye-sensitized solar cells

The co-sensitization of two organic dyes (SQ1 and JK2), which are complementary in their spectral responses, shows enhanced photovoltaic performance compared with that of an individual organic dye-sensitized solar cell. The power conversion efficiency of the co-sensitized organic dye solar cell based on the newly developed binary ionic liquid (solvent-free) electrolyte gives 6.4% under AM 1.5 sunlight at 100 mW/cm2 irradiation, which is higher than that of individual dye-sensitized solar cells. The incident monochromatic photon-to-current conversion efficiency (IPCE) of the co-sensitized solar cell shows typical absorption peaks at 530 and 650 nm corresponding to the two dyes and displays a broad spectral response over the entire visible spectrum with IPCE of >40% in the 400-700 nm wavelength domain.     

Arylamine-based dyes for p-type dye-sensitized solar cells

New arylamine-based sensitizers for p-type dye-sensitized solar cells (DSSCs) have been synthesized and used for p-type DSSCs. The best conversion efficiency reaches ～0.1%. Sensitizers with two anchoring carboxylic acids lead to higher open-circuit voltages, short-circuit currents, and energy conversion efficiencies.     

Thieno[3,4-b]thiophene-based organic dyes for dye-sensitized solar cells

New dipolar sensitizers containing an ethyl thieno[3,4-b]thiophene-2-carboxylate (ETTC) entity in the conjugated spacer have been synthesized in two isomeric forms. These compounds were used as the sensitizers of n-type dye-sensitized solar cells (DSSCs). The best conversion efficiency (5.31%) reaches approximately 70% of the N719-based (7.41%) DSSC fabricated and measured under similar conditions. The ETTC-containing compounds exhibit a bathochromic shift of the absorption compared to their thiophene congeners due to the quinoid effect, however, charge-trapping at the ester group of ETTC was found to jeopardize the electron injection and lower the cell efficiency. Charge trapping is alleviated as the ester group of ETTC is replaced with a hydrogen atom, as evidenced from the theoretical computation.     

Highly efficient substituted triple rhodanine indoline dyes in zinc oxide dye-sensitized solar cell

Substituited triple rhodanine indoline dyes showed higher performance than known triple rhodanine derivative (D150). A few triple rhodanine indoline derivatives showed comparable conversion efficiency to D149.     

Dipolar organic pyridyl dyes for dye-sensitized solar cell applications

New dipolar dyes containing arylamine as the electron donor, 2-cyanoacrylic acid as the acceptor, and a conjugated spacer with incorporation of 2,5-pyridyl entity have been synthesized. Photophysical and electrochemical measurements, and theoretical computation were carried on these dyes. The solar cell devices using these dyes as the sensitizers exhibited light-to-electricity efficiencies in the range of 4.28–5.27%, which reaches 60–72% of N719-based device fabricated and measured under similar conditions. Better DSSC performance can be achieved with the dye where pyridine group is attached to thienyl or fluorenyl group because of favorable resonance energy and/or coplanarity for more effective charge transfer.     

Molecular design of novel indacenodithiophene-based organic dyes for efficient dye-sensitized solar cells applications

Indacenodithiophene (IDT)-based high-efficiency photovoltaics have received increasing attention recently. This paper reports a density functional theory investigation of the electronic and optical properties of three IDT-based organic dyes together with the dye/(TiO₂)₄₆ interface. In order to enhance the photoelectric properties of IDT dyes, this paper considers two methods for the structure modification of the experimentally reported dye DPInDT (J. Org. Chem. 2011, 76, 8977): the extension of the conjugation length by dithienothiophene as well as the heteroatom substitution of the bridging atoms by electron-rich nitrogen atoms. Our calculations show that both methods obviously affect the distributions of the molecular orbitals and notably red shift the absorption peaks of around 20 nm, with the former method demonstrating enhanced light harvesting efficiency. The structure modifications proposed also enhance the emission spectrum properties for IDT-based organic dyes. The calculated ultrafast injection time of electrons from the excited state of IDT dyes to the (TiO₂)₄₆ belongs to the femtosecond order of magnitude, and is ideal for efficient photoelectric conversion process in dye-sensitized solar cells (DSSCs) applications. The IDT dyes designed in this paper have good electronic and spectroscopic properties. This study is expected to provide useful guidance for the development of novel IDT dyes for applications in DSSCs.