带裂纹矩形板自由振动解析解

选取带有补充项的双重正弦傅里叶级数作为振型函数通解,来解析研究带裂纹矩形板的自由振动特性。先将带裂纹矩形板分割成若干小矩形板,利用各小矩形板的边界条件,并结合振型函数中待定常数的物理意义,简化得到各小矩形板的振型函数,再结合各板的控制方程、未使用的边界条件、公共边协调条件及本文提出公共自由角点的协调条件,建立求解频率的代数方程组,然后将其转化为广义特征值问题来求解带裂纹矩形板的无量纲频率;最后选取具体参数进行计算并与文献结果对比,吻合良好,证明了本文采用的研究方法以及所提出公共角点协调条件的正确性和合理性。由于该振型函数能满足矩形板的任意边界约束,且其中的待定常数具有明确的物理意义,所以可使矩形板问题的求解统一化、简单化和规律化。     

Semi-analytical modeling and analysis of nonlinear vibration of bolted thin plate based on virtual material method

Nonlinear Dynamics - In order to effectively simulate the vibration behavior of bolted structures, it is necessary to consider the non-uniform distribution of pressure and the nonlinear...     

周边嵌入弹性圆薄板非线性自由振动直接摄动解法

采用弹性圆薄板中心无量纲振幅和板厚与半径的比值为参数。将挠度、应力函数对半径的导数以及自由振动频率展开为双参数的幂级数。用直接摄动法获得各级递推线性偏微分方程。应用变分法求得各级递推方程的近似解，从而给出弹性圆薄板非线性自由振动频率的基本公式。     

Effect of decoupled fluid loading on nonlinear vibration of a flat plate

Numerical simulations of nonlinear responses of a flat plate subject to decoupled fluid loading are carried out. Under clamped boundary conditions and subject to forced vibration at its natural frequency corresponding to the (5,1) mode, the various response modes of the plate are determined. It is found that increasing the excitation amplitude, the response changed from periodic to chaotic. In addition, the fluid-wall shear stresses are found to change the response from linear to nonlinear and vice versa depending on their magnitudes. When a static pressure load is combined with fluid-wall shear stresses and low excitation amplitude, the resulting response was chaotic.     

矩形悬臂薄板的解析解

首先把弹性薄板弯曲问题的控制方程表示成为Hamilton正则方程,然后利用辛几何方法对全状态相变量进行分离变量,求出其本征值后,再按本征函数展开的方法求出矩形悬臂薄板的解析解。由于在求解过程中不需要事先人为地选取挠度函数,而是从薄板弯曲的基本方程出发,直接利用数学的方法求出可以满足其边界条件的这类问题的解析解,使得问题的求解更加理论化和合理化。文中的最后还给出了计算实例来验证本文所采用的方法以及所推导出的公式的正确性。     

Analytical analysis for vibration of longitudinally moving plate submerged in infinite liquid domain

The vibration of a longitudinally moving rectangular plate submersed in an infinite liquid domain is studied analytically with the Rayleigh-Ritz method. The liquid is assumed to be incompressible, inviscid, and irrotational, and the velocity potential is used to describe the fluid velocity in the whole liquid field. The classical thin plate theory is used to derive mechanical energies of the traveling plate. As derivative of transverse displacement with respect to time in the compatibility condition equation exists, an exponential function is introduced to depict the dynamic deformation of the moving plate. It is shown that this exponential function works well with the RayleighRitz method. A convergence study shows a quick convergence speed for the immersed moving plate. Furthermore, the parametric study is carried out to demonstrate the effect of system parameters including the moving speed, the plate location, the liquid depth,the plate-liquid ratio, and the boundary condition. Results show that the above system parameters have significant influence on the vibration characteristics of the immersed moving plate. To extend the study, the method of added virtual mass incremental(AVMI)factor is used. The results show good agreement with those from the Rayleigh-Ritz method.     

Unified 2D continuous and reduced order modeling of thermomechanically coupled laminated plate for nonlinear vibrations

A unified formulation of the thermomechanical problem of laminated plates with von Karman nonlinearities, undergoing finite amplitude vibrations, is presented. It integrates mechanical and thermal aspects, by addressing them in parallel via the introduction of generalized 2D variables and equations also for the latter. The formulation virtually embeds a multitude of possible models, resulting from different assumptions about the plate mechanical and thermal configurations. The obtained continuous model is then subjected to a minimum reduction via Galerkin procedure. Some analyses of free and forced nonlinear vibrations under variable mechanical and/or thermal excitations are also carried out, to get some hints on the importance of different thermal aspects associated with membrane and bending dynamics, and on the possibility to catch them via variably simplified models.     

Accurate modeling and analysis of a typical nonlinear vibration isolator with quasi-zero stiffness

Nonlinear Dynamics - A typical quasi-zero stiffness (QZS) vibration isolator composed of two lateral springs and a vertical spring has been widely studied previously, aiming to widen the frequency...     

Free vibration of two coupled nonlinear oscillators

An analytical investigation is carried out on the free vibration of a two degree of freedom weakly nonlinear oscillator. Namely, the method of multiple time scales is first applied in deriving modulation equations for a van der Pol oscillator coupled with a Duffing oscillator. For the case of non-resonant oscillations, these equations are in standard normal form of a codimension two (Hopf-Hopf) bifurcation, which permits a complete analysis to be performed. Three different types of asymptotic states-corresponding to trivial, periodic and quasiperiodic motions of the original system-are obtained and their stability is analyzed. Transitions between these different solutions are also identified and analyzed in terms of two appropriate parameters. Then, effects of a coupling, a detuning, a nonlinear stiffness and a damping parameter are investigated numerically in a systematic manner. The results are interpreted in terms of classical engineering terminology and are related to some relatively new findings in the area of nonlinear dynamical systems.     

The couple stress-based nonlinear coupled three-dimensional vibration analysis of microspinning Rayleigh beams

Nonlinear Dynamics - The nonlinear coupled three-dimensional vibrations of microspinning Rayleigh beams are analytically studied utilizing the modified couple stress theory to take into account the...     

NONLINEAR VIBRATION FOR MODERATE THICKNESS RECTANGULAR CRACKED PLATES INCLUDING COUPLED EFFECT OF ELASTIC FOUNDATION

IntroductionThe moderate thickness plates on elastic foundation are a kind of important structure instructural engineering. The mechanic characters of the plates on elastic foundation withdifferent boundary conditions have been received considerable atten…     

Free vibration analysis of a hung clamped-free cylindrical shell partially submerged in fluid

The free flexural vibration of a hung clamped-free cylindrical shell partially submerged in a fluid is investigated. The fluid is assumed to be inviscid and irrotational. The cylindrical shell is modelled by using the Rayleigh-Ritz method based on Sanders’ shell theory. The kinetic energy of the fluid is derived by solving the boundary-value problem related to the fluid motion. The natural vibration characteristics of the partially submerged cylindrical shell are discussed with respect to the added virtual mass approach. In this study, the nondimensionalized added virtual mass incremental factor for the partially submerged finite shell is derived. This factor can be readily used to estimate the change in the natural frequency of the shell due to the presence of a fluid.     

Three-dimensional general magneto-electro-elastic finite element model for multiphysics nonlinear analysis of layered composites

In this paper, by defining a general potential energy for the multiphase coupled multiferroics and applying the minimum energy principle, the coupled governing equations are derived. This system of equations is then discretized as a general three-dimensional(3D) finite element(FE) model based on the COMSOL software. After validating the formulation, it is then applied to the analysis and design of the common sandwich structure of multiferroics composites. Under the typical static loading, the ef...     

Stability and dynamic analysis of partially cracked thin orthotropic microplates under thermal environment: an analytical approach

Abstract

An analytical model is proposed to analyze the vibration and buckling problem of partially cracked thin orthotropic microplate in the presence of thermal environment. The differential governing equation for the cracked plate is derived using the classical plate theory in conjunction with the strain gradient theory of elasticity. The crack is modeled using appropriate crack compliance coefficients based on the simplified line spring model. The influence of thermal environment is incorporated in governing equation in form thermal moments and in-plane compressive forces. The governing equation for cracked plate has been solved analytically to get fundamental frequency and central deflection of plate. To demonstrate the accuracy of the present model, few comparison studies are carried out with the published literature. The stability and dynamic characteristics of the cracked plate are studied considering various parameters such as crack length, plate thickness, change in temperature, and internal length scale of microstructure. It has been concluded that the frequency and deflection are affected by crack length, temperature, and internal length scale of microstructure. Furthermore, to study the buckling behavior of cracked plate, the classical relations for critical buckling load and critical buckling temperature is also proposed considering the effect of crack length, temperature, and internal length scale of microstructure.     

Analytical method for solving nonlinear multilayer anisotropic plate theory problems

Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 2, pp. 126–131, March–April, 1990.     

Random uncertainty modeling and vibration analysis of a straight pipe conveying fluid

A new procedure on random uncertainty modeling is presented for vibration analysis of a straight pipe conveying fluid when the pipe is fixed at both ends. Taking real conveying condition into account, several randomly uncertain loads and a motion constraint are imposed on the pipe and its corresponding equations of motion, which are established from the Euler–Bernoulli beam theory and the nonlinear Lagrange strain theory previously. Based on the stochastically nonlinear dynamic theory and the Galerkin method, the equations of motion are reduced to the finite discretized ones with randomly uncertain excitations, from which the vibration characteristics of the pipe are investigated in more detail by some previously developed numerical methods and a specific Poincaré map. It is shown that, the vibration modes change not only with the frequency of the harmonic excitation but also with the strength and spectrum width of the randomly uncertain excitations, quasi-periodic-dominant responses can be observed clearly from the point sets in the Poincaré’s cross-section. Moreover, the nonlinear elastic coefficient and location of the motion constraint can be adjusted properly to reduce the transverse vibration amplitude of the pipe.     

A nonlinear vibration isolator supported on a flexible plate: analysis and experiment

Nonlinear Dynamics - To address low-frequency vibration isolation, an issue that engineers often face, this paper first studies the nonlinear energy transfer of a flexible plate, with arbitrary...     

Unsymmetrical nonlinear bending problem of circular thin plate with variable thickness

Introduction Manystructuralelements(pole,plate,shell)withunevenandvariablethicknessarewidely usedinallkindsofengineeringfields.Engineerscansavematerialswhentheydesignbecause theseelementshavebetteroptimizedshapeofstructuralfeature,butthisaddsdifficultytotheanalysisoftheirmechanicalcapability.Manypreviouspapers[1-4]havesolvedtheproblemof symmetricalaxis,butnobodyhassolvedtheunsymmetricalnonlineardeformationproblemof circularthinplatewithvariablethicknessandunsymmetricalaxisuptonow,afewworkonly …     

Suppression of vibration transmission in coupled systems with an inerter-based nonlinear joint

Nonlinear Dynamics - This study proposes an inerter-based nonlinear passive joint device and investigates its performance in suppression of vibration transmission in coupled systems. The joint...     

主动隔振下固支薄板基础振动抑制的参数多目标优化

考虑动力设备-隔振器-薄板基础为复合主动隔振体系,并将薄板视为固支形式;以传递力作用在薄板基础上某点导纳为中间变量,在传递力、导纳、薄板振动峰值位移及峰值点距离影响因素分析的基础上,进行了系统耦联参数的多目标优化研究。优化算法采用较新的强度Pareto进化算法(SPEA2),该算法具有参数设置少、收敛速度快、寻优能力强及Pareto最优解分布均匀等优点。目标函数考虑为薄板振动的位移峰值及峰值点间的距离,目的是在有效控制薄板振动的同时,尽可能地使薄板趋于单峰值点振动,这对于板上附属操作设备及工作人员是有利的;最后,在最优参数的基础上对隔振器的安装位置进行讨论研究。数值计算结果表明,本文方法可有效地计算出隔振系统的最优参数,并为工业建筑及其他工程振动的最优隔振设计提供新思路。