含脱层损伤复合材料层合梁的冲击动力屈曲

针对含初始缺陷和脱层损伤的复合材料层合梁的轴向冲击动力屈曲问题进行了分析。基于Hamilton原理导出了考虑初始缺陷、轴向和横向惯性、横向剪切变形以及转动惯性影响时含脱层损伤复合材料梁的非线性动力屈曲控制方程;基于B-R准则,采用有限差分方法求解了受轴向冲击载荷作用下含脱层损伤复合材料梁的动力屈曲问题;讨论了冲击速度、初始几何缺陷、铺层角度以及脱层长度等因素对复合材料层合梁动力屈曲的影响。     

含初缺陷复合材料圆柱曲板的动力屈曲分析

基于修正的一阶剪切变形理论，利用Ｈａｍｉｌｔｏｎ原理导出包含横向剪切变形和转动惯量的复合材料长圆柱曲板的非线性动力方程，通过将位移和载荷展开为Ｆｏｕｒｉｅｒ级数，把非线性偏微分方程组转化为二阶常微分方程组，并可由四阶Ｒｕｎｇｅ－Ｋｕｔｔａ方法数值求解，通过算例，讨论了有关因素对迭层复合材料圆柱曲板动力屈曲的影响。     

Hamilton体系下功能梯度梁的热冲击动力屈曲分析

在Hamilton体系下,基于Euler梁理论研究了功能梯度材料梁受热冲击载荷作用时的动力屈曲问题;将非均匀功能梯度复合材料的物性参数假设为厚度坐标的幂函数形式,采用Laplace变换法和幂级数法解析求得热冲击下功能梯度梁内的动态温度场:首先将功能梯度梁的屈曲问题归结为辛空间中系统的零本征值问题,梁的屈曲载荷与屈曲模态分别对应于Hamilton体系下的辛本征值和本征解问题,由分叉条件求得屈曲模态和屈曲热轴力,根据屈曲热轴力求解临界屈曲升温载荷。给出了热冲击载荷作用下一类非均匀梯度材料梁屈曲特性的辛方法研究过程,讨论了材料的梯度特性、结构几何参数和热冲击载荷参数对临界温度的影响。     

初曲矩形薄板的非线性动力屈曲研究

对两参数冲击载荷面内压缩作用下初曲矩形薄板的非线性动力屈曲问题进行了理论研究。首先采用双重余弦函数的组合确定了面内冲击矩形薄板的艾雷应力函数和中面力的分布；其次根据伽辽金法求得了初曲矩形薄板非线性动力屈曲问题的控制方程，基于巴拿赫压缩映象原理，采用逐次逼近方法求解了该控制方程。最后，应用本文发展的理论，给出了面内两参数冲击载荷作用下初曲矩形薄板动力屈曲响应的计算实例，计算结果与已有的实验结果较吻合     

结构动力屈曲研究进展

本文系统介绍了结构的振动屈曲、冲击屈曲研究进展,阐述了作为冲击屈曲极端情况的阶跃载荷下的动力屈曲问题。同时,结合所讨论的动力屈曲问题,对其屈曲准则和分析方法也进行了一般性讨论。     

受轴向冲击圆柱壳的塑性动力屈曲研究

令屈曲模态同时包含轴向坐标x和环向坐标 ,通过最优模态的分析 ,直接得到各向同性线性强化刚塑性圆柱壳受轴向冲击时发生轴对称屈曲或非轴对称屈曲时的临界速度 ,在此基础上讨论了临界速度与径厚比的关系。     

含黏弹性夹芯FG-GRC后屈曲梁的低速冲击响应

研究了含黏弹性夹芯的功能梯度石墨烯增强复合材料(functionally graded graphene reinforced composite, FG-GRC)后屈曲梁在低速跌落冲击下的跳跃振荡行为.采用修正Halpin-Tsai细观模型预测FG-GRC的材料宏观属性.使用赫兹点接触模型确定冲击器和梁之间的接触力.提出了考虑轴向预应力的复合材料层本构关系和阻尼层的Kelvin型黏弹性本构.通过一种广义高阶剪切变形锯齿梁模型建立夹芯梁的非线性位移场. 基于Hamilton 能量变分原理, 推导了动力学控制方程组. 通过两步分析,首先获得弹性后屈曲平衡路径作为冲击问题的初始状态. 随后, 结合四阶龙格库塔法,拓展了两步摄动-伽辽金法计算接触力的时程曲线以及后屈曲梁的位移时程曲线.研究了后屈曲梁在单次和两次撞击下双稳态大幅振荡过程的动力学特征.讨论了轴向载荷、冲击速度、黏弹性阻尼特性、冲击器材料等因素对于碰撞接触力以及后屈曲梁动力响应的影响规律.结果表明, 接触力仅对冲击速度较为敏感,一定的结构碰撞参数设计可以在接触力变化不大的情况下,使得后屈曲梁由单势能阱运动转变为双阱大幅振荡.      

含黏弹性夹芯FG-GRC后屈曲梁的低速冲击响应

研究了含黏弹性夹芯的功能梯度石墨烯增强复合材料(functionally graded graphene reinforced composite,FG-GRC)后屈曲梁在低速跌落冲击下的跳跃振荡行为.采用修正Halpin-Tsai细观模型预测FG-GRC的材料宏观属性.使用赫兹点接触模型确定冲击器和梁之间的接触力.提...     

圆柱壳在侧向非对称冲击载荷下的塑性动力屈曲

采用塑性动力屈曲能量准则，对圆柱壳非均匀局部径向冲击下的塑性动力屈曲进行了研究。文中分别采用弹性的角弹簧和位移弹簧模拟非屈曲部分对屈曲部分的影响，推导了有关模态和临界速度的冲击公式，并与有关的实验结果进行了比较，分析了两种边界对塑性动力屈曲的影响。     

直杆动力屈曲问题研究进展

杆做为最基本的结构单元，其屈曲问题一直受到人们的极大关注，本文就这一研究领域的若干基本问题、处理方法、目前取得的成果以及人们共同关心的一些问题做一个简要的总结和评述     

Dynamic buckling and plastic collapse of rectangular strips under axial slamming impact

The dynamic buckling and plastic collapse of elastic-plastic rectangular strips under axial slamming impact are investigated experimentally. The dynamic response of the specimens is measured by several back-to-back paris of strain gages located at different positions. According to the experimental records, the compressive and bending motions of the rectangular strips are analyzed. The strips exhibit three different critical dynamic conditions: buckling, plastic incipience and plastic collapse. Based on the response characters, three criteria are proposed which completely define the elastic-plastic dynamic behavior of rectangular strips under axial slamming impact with loading durations ranging from 14 to 18 milliseconds. These conditions are estimated by introducing three critical axial compressive strains. Moreover, the effect of geometric imperfection on the dynamic behavior of the strips is discussed.     

弹性圆柱壳在轴向冲击载荷和温度耦合作用下的屈曲

通过引入哈密顿体系,将临界载荷和临界温度及它们所对应的屈曲模态归结为辛体系下的广义本征值和本征解问题。根据辛本征解的正交性和完备性,给出了全部的且独立存在的屈曲模态。数值结果表明,在轴向冲击载荷和温度耦合作用下,弹性圆柱壳的屈曲呈现出复杂的模式,温度直接影响冲击临界载荷的大小。随着温度的增加,冲击临界荷载降低,最后,文中给出各种条件下的屈曲模态。     

The impact torsional buckling of elastic cylindrical shells with arbitrary form imperfection

A perturbation analysis for the impact torsional buckling of imperfective elastic cylindrical shells subjected to a step torque is given..The imperfection is supposed to be small and has arbitrary form.It is shown that only the imperfection which has the shape of static torsional buckling mode could influence the critical step torque.Finally a formula is presented for the critical step torque.     

Nonlinear strain components of general shells with initial geometric imperfections

On the basis of nonlinear strain component formulations of three-dimensional continuum, this paper has derived the nonlinear strain component formulations of shells with initial geometric imperfections. The derivation is not confined to a special shell, therefore they possess general properties. These formulations provide the theoretical basis of the strain analysis for geometric nonlinear problems of shells with initial geometric imperfections     

Dynamic buckling of stiffened plates under fluid-solid impact load

A simple solution of the dynamic buckling of stiffened plates under fluid-solid impact loading is presented. Based on large deflection theory, a discretely stiffened plate model has been used. The tangential stresses of stiffeners and in-plane displacement are neglected. Applying the Hamilton‘ s principle, the motion equations of stiffened plates are obtained. The deflection of the plate is taken as Fourier series, and using Galerkin method, the discrete equations can be deduced, which can be solved easily by Runge-Kutta method. The dynamic buckling loads of the stiffened plates are obtained from Budiansky-Roth ( B-R ) curves.     

Buckling reliability evaluation of a clamped beam with random imperfections subjected to axial impact using probability density evolution method

Based on the generalized probability density evolution theory, the joint probability density function of impact responses and random factors, that is, random initial imperfection and load intensity for a clamped beam, is derived. And a Total Variation Diminishing (TVD)-based numerical scheme is employed to obtain the numerical solutions. With given threshold values, the dynamic reliability is assessed in terms of a bilateral displacement criterion. Two numerical examples are then presented to demonstrate the proposed method. One is a clamped beam with random initial perfections subjected to a deterministic impulse load, and another is a clamped beam with a deterministic initial imperfection subjected to impact loading with a random amplitude. The predicted dynamic reliability is in good agreement with the result by Monte Carlo method.     

Ellipsoidal-bound convex model for the non-linear buckling of a column with uncertain initial imperfection

Ellipsoidal-bound convex model approach for computing the non-linear buckling load of a non-linear elastic foundation-based column with uncertain initial imperfection is presented. In this study, the uncertain initial deflections are considered to be unknown except that they belong to a given set in the ellipsoidal space. The non-zero central values for uncertain initial deflections are considered here, so this is the general case. It is different from Ref. [I. Elishakoff, G.Q. Cai, J.H. Starnes Jr., Non-linear buckling of a column with initial imperfection via stochastic and non-stochastic convex models, Int. J. Non-Linear Mech. 29(1) (1994) 71-82], where only the zero central values for them are considered. On the other hand, the presented ellipsoidal-bound convex model is directly based on the exact model, whereas convex models in previous literatures are based on the first-order or second-order approximate models to solve uncertain problems. The influences of the central values and bounds of uncertain initial deflections on the buckling load are investigated. Comparisons between the ellipsoidal-bound convex model and interval-bound convex model are performed, where the stochastic results at different reliability levels and different truncated normal distribution are taken as the benchmarks of accuracy for judgment.     

不连续岩石梁的失稳解析

本文根据不连续岩石梁的物理力学特性提出了无拉力岩石梁的力学解析模型。根据Ｆｒｅｅｂｏｄｙ法及Ｃａｓｔｉｇｌｉａｎｏ定量导出了不连续梁各物理量的求解方程式。进而采用挠度增量δｍａｘ＾ｉ＋１＝δｍａｘ＾ｉ＋Δδ↑－的逐次解析方法，求解了不连续梁的失稳问题，得出了与Ｆ．Ｄ．Ｗｒｉｇｈｔ的试验值相吻合的结果。探讨了不连续岩石梁在不同荷载条件下的失稳特性。     

基于模态缺陷的受压球壳屈曲特性研究

针对受压球壳非线性屈曲过程,对含初始缺陷受压球壳的稳定性进行研究。根据EN1993-1-6（2007）规范,给出不同制造等级壳体的等效缺陷值计算方法;基于线性特征值分析的模态构型给出初始缺陷的分布。利用非线性有限元弧长法对球壳受压失稳过程进行数值模拟,得到屈曲前后球壳变形情况及全过程载荷-位移曲线。计算一致缺陷模态法和N阶缺陷模态法对应的球壳屈曲临界载荷,结果表明,受压球壳对缺陷较敏感,承载能力随缺陷值增大而降低;一致缺陷模态法计算便捷,在工程应用上具有合理性,N阶缺陷模态法考虑高阶模态缺陷构型,结果更加全面,可以为工程中缺陷结构稳定性设计提供参考。