Amino acid building blocks for efficient Fmoc solid-phase synthesis of peptides adenylylated at serine or threonine

The first straightforward building block based (non-interassembly) synthesis of peptides containing adenylylated serine and threonine residues is described. Key features include final global acidolytic protective group removal as well as full compatibility with standard Fmoc solid-phase peptide synthesis (SPPS). The described Thr-AMP SPPS-building block has been employed in the synthesis of the Thr-adenylylated sequence of human GTPase CDC42 (Ac-SEYVP-T(AMP)-VFDNYGC-NH(2)). Further, we demonstrate proof-of-concept for the synthesis of an Ser-adenylylated peptide (Ac-GSGA-S(AMP)-AGSGC-NH(2)) from the corresponding adenylylated serine building block.     

The (2-phenyl-2-trimethylsilyl)ethyl-(PTMSEL)-linker in the synthesis of glycopeptide partial structures of complex cell surface glycoproteins

The (2-phenyl-2-trimethylsilyl)ethyl-(PTMSEL) linker represents a novel fluoride-sensitive anchor for the solid-phase synthesis of protected peptides and glycopeptides. Its cleavage is achieved under almost neutral conditions using tetrabutylammonium fluoride trihydrate in dichloromethane thus allowing the construction of complex molecules sensitive to basic and acidic media commonly required for the cleavage of standard linker systems. The advantages of the PTMSEL linker are demonstrated in the synthesis of glycopeptides from the liver intestine (LI)-cadherin and the mucin MUC1, bearing carbohydrate moieties such as N-linked chitobiose or O-linked sialyl-T(N)-residues. The synthesis of these types of glycopeptides is difficult because they are prone to secondary structure formation during the synthesis on the solid phase as well as in the completely deprotected form. Using the PTMSEL linker these molecules are accessible by automated synthesis according to the Fmoc strategy without frequently observed side reactions such as aspartimide or diketopiperazine formation.     

Organometallic methods for the synthesis and functionalization of azaindoles

Azaindoles (also called pyrrolopyridines) constitute essential subunits in many pharmaceutically important compounds. The synthesis of azaindoles has been a great synthetic challenge for chemists. Many classical methods for indole synthesis (such as Fischer and Madelung cyclizations) often cannot be effectively applied to the synthesis of the corresponding azaindoles. In recent years, advances in organometallic chemistry have enabled a number of novel and efficient methodologies for azaindole formation as well as for the further functionalization of azaindole templates. In this tutorial review, we have surveyed the recent development of organometallic chemistry-based methods for azaindole synthesis.     

Total synthesis of natural (−)- and unnatural (+)-Melearoride A

This communication details the first total synthesis of the 13-membered macrolide, (?)-Melearoride A, as well as unnatural (+)-Melearoride A. The synthesis features a concise 13 step synthesis (11 steps longest linear sequence) that offers flexible stereo-control and multiple opportunities for unnatural analog synthesis to delve into antifungal SAR. The route features a cuprate addition, an Evans asymmetric alkylation, and a ring-closing metathesis (RCM) to close the 13-membered macrocyclic core.     

p-Menthane-3-carboxaldehyde: a useful chiral auxiliary for the synthesis of chiral quaternary carbons of high enantiomeric purity

(+)- or (-)-p-Menthane-3-carboxaldehyde is made in two easy steps from (+)- or (-)-menthone, respectively. This auxiliary allows for the synthesis of carbonyl compounds bearing a alpha-chiral quaternary carbon. The flexibility, efficiency, and ease of use of the method are demonstrated in a series of examples, which include the total synthesis of (+)-cuparenone as well as a partial synthesis of (-)-cassiol.     

The total synthesis of coleophomones B, C, and D

Members of the coleophomone family of natural products all possess several intriguing and challenging architectural features, as well as exhibit unusual biological activity. They, therefore, constitute attractive targets for synthesis. In this Article, we describe the total synthesis of coleophomones B (2), C (3), and D (4). The highly strained and congested 11-membered macrocycle of coleophomones B (2) and C (3) was constructed using an impressive olefin metathesis reaction. Furthermore, both of the requisite geometric isomers of the Delta(16,17) within the macrocycle could be accessed from a common precursor, facilitating a divergence that lent the coleophomone B (2)/C (3) synthesis an unusually high degree of efficiency. The synthesis of coleophomone D (4) confirmed that it exists as a dynamic mixture of isomeric forms with a different aromatic substitution pattern from the other family members.     

Total synthesis of apoptolidin: construction of enantiomerically pure fragments

A general strategy for the total synthesis of the antitumor agent apoptolidin (1) is proposed, and the chemical synthesis of the defined key building blocks (4, 5, 6, 8, and 9) in their enantiomerically pure forms is described. The projected total synthesis calls for a dithiane coupling reaction to construct the C(20)-C(21) bond, a Stille coupling reaction to form the C(11)-C(12) bond, and a Yamaguchi macrolactonization to assemble the macrolide ring, as well as two glycosidation reactions to fuse the carbohydrate units onto the molecule. First and second generation syntheses to the required fragments for apoptolidin (1) are described.     

Synthesis of DNA-sequence-selective hairpin polyamide platinum complexes

Two DNA-sequence-selective hairpin polyamide platinum(II) complexes, containing pyrrole and imidazole heterocyclic rings, have been synthesised by different methods. A six-ring complex, selective for (A/T)GGG(A/T) DNA sequences, was made by using solid-phase synthesis, whilst an eight-ring complex, selective for (A/T)CCTG(A/T) DNA sequences, was made by utilising standard wet chemistry. Solid-phase synthesis resulted in a significantly higher yield, required less purification and is more efficient than the wet synthesis; as such, it is the preferred method for further work. The metal complexes were characterised by (1)H and (195)Pt NMR spectroscopy and ESI mass spectrometry. The two compounds provide a foundation for the synthesis of more complex molecules containing multiple hairpins and/or platinum groups.     

Enantioselective total synthesis of (-)-acetylaranotin, a dihydrooxepine epidithiodiketopiperazine

The first total synthesis of the dihydrooxepine-containing epidithiodiketopiperazine (ETP) (-)-acetylaranotin (1) is reported. The key steps of the synthesis include an enantioselective azomethine ylide (1,3)-dipolar cycloaddition reaction to set the absolute and relative stereochemistry, a rhodium-catalyzed cycloisomerization/chloride elimination sequence to generate the dihydrooxepine moiety, and a stereoretentive diketopiperazine sulfenylation to install the epidisulfide. This synthesis provides access to (-)-1 in 18 steps from inexpensive, commercially available starting materials. We anticipate that the approach described herein will serve as a general strategy for the synthesis of additional members of the dihydrooxepine ETP family.     

酸性条件下纯硅六方介孔分子筛的合成(Ⅱ)合成温度、时间的影响及其与碱性合成的比较

本文以十六烷基三甲基溴化铵为模板剂,正硅酸乙酯为硅源,考察了反应温度和时间对酸性条件下合成纯硅六方介孔分子筛的影响,并与碱性合成路径相比较。结果表明,由于无机物种与表面活性剂之间的相互作用不同,六方介孔分子筛的酸性合成经历了与碱性合成完全不同的机理。对要到性合成来说,由于六方结构的形成取决于稳定的模板胶束的存在,并不特别依赖于硅物种的缩合,故高温、长反应时间等有利于缩合的因素对提高产品质量几乎没有促进作用,较高的反应温度甚至起反作用。因此,酸性合成宜采用室温条件。     

Multivariate optimization of the synthesis and of the microwave dissolution of biomorphic silicon carbide ceramics

Biomorphic silicon carbide ceramics are a new class of materials that are used for various industrial applications owing to its attractive properties. The efficiency of the synthesis and the partly extreme properties of the biomorphic ceramic depend decisively on the synthesis parameters and on the impurities of the final ceramic. In the present article the synthesis as well as the decomposition of these materials is optimized using a multivariate methodology for the design of experiments. Three variables (initial amount of Si, infiltration temperature and reaction time) were considered as factors in the synthesis optimization and six variables (digestion time, ramp time, microwave power, volumes of concentrated HF, HNO₃ and H₂SO₄) in the microwave dissolution optimization. Interactions, between analytical factors and their optimised levels were investigated using full factorial, Plackett–Burman and central composite designs. The synthesis parameters that found higher percentage of SiC (quantified by FTIR) and the digestion procedure that found higher concentrations of metals (Co, Cr and Ni, determined by FI-ETAAS) were considered the optimum.     

Asymmetric Total Synthesis of Propindilactone G,Part 2: Enantioselective Construction of the Fully Functionalized BCDE Ring System

The enantioselective synthesis of the fully functionalized BCDE tetracyclic ring system of propindilactone G ( A ) is reported. Several synthetic methods were developed and applied to achieve this goal, including: 1) an asymmetric Diels–Alder reaction in the presence of Hayashi′s catalyst for the synthesis of optically pure key intermediate 3 ; 2) an intramolecular Pauson–Khand reaction (PKR) for the stereoselective synthesis of the BCDE ring with an all‐carbon chiral quaternary center at the C13 position by using the TMS‐substituted acetylene as the substrate; and 3) Pd‐catalyzed reductive hydrogenolysis for the stereoselective synthesis of the fully functionalized BCDE tetracyclic ring system. The chemistry developed herein provided a greater understanding of the total synthesis propindilactone G ( A ) and its analogues.     

钐试剂在有机合成中的应用

钐试剂在有机合成中的应用是近年来有机合成方法学研究中的热点之一。综述了十余年来本课题组在钐试剂应用于有机合成方面所开展的有关工作：(1)二碘化钐作为偶联剂和还原剂在有机合成中的应用;(2)金属钐直接应用于有机合成;(3)三碘化钐作为路易斯酸应用于有机合成;(4)有机钐试剂在有机合成中的应用。     

A short enantioselective synthesis of (+)-eleutherin, (+)-allo-eleutherin and a formal synthesis of (+)-nocardione B

A short enantioselective synthesis of (+)-eleutherin, (+)-allo-eleutherin and the formal synthesis of (+)-nocardione B is described. The synthesis is completed in six steps in overall yields of 8% for eleutherin and 14% for allo-eleutherin. The synthetic strategy features an efficient combination of the Dötz annulation reaction with a chiral alkyne and an oxa-Pictet Spengler reaction as the keys steps in the stereodivergent synthesis of (+)-eleutherin and (+)-allo-eleutherin. The synthesis of (S)-(+)-2-(2′-hydroxypropyl)-5-methoxy-1,4-naphthoquinone entails the formal synthesis of (+)-nocardione B.     

R-沙美特罗的合成方法

近年来手性沙美特罗的合成方法有微生物催化、不对称氢化、CBS(Corey-Bakshi-Shibata)还原反应及不对称Henry反应、手性(Salen)Co试剂催化的HKR(末端环氧不对称水解动力学)拆分反应等。对这些方法进行比较,结果表明,不对称催化合成由于其反应收率高、反应产物光学纯度高、操作容易控制,在目前手性药物的合成中处于主导地位。此外酶催化不对称合成、手性辅基诱导的对映选择性合成等方法也是有效的途径。     

Efficient and diversity-oriented total synthesis of Riccardin C and application to develop novel macrolactam derivatives

Riccardin C (RC, 1) is a macrocyclic bis(bibenzyl) natural product exhibiting remarkable biological activity as a nuclear liver X receptors (LXRs) ligand and a lipid metabolism mediator. RC is expected to be a lead compound to develop drugs for atherosclerotic diseases, and therefore exploiting diversity-oriented synthesis of RC is a promising approach to drug discovery. In this paper, we report novel total synthesis of RC (7.4% overall yield in 16 steps) by using the intramolecular S_NAr reaction as key cyclization reaction. This is the first example of efficient macrocyclization using 3-nitro-4-fluorostilbene as an electrophile. The methodology could be applied to synthesize novel lactam analogs of RC. The diversity-oriented synthesis of RC is versatile method for the synthesis of various types of bis(bibenzyl) natural products and their derivatization.     

Green route synthesis of 4-thiazolidinone analogs of isonicotinic acid hydrazide

Abstract

The broad and potent activity of 4-thiazolidinones has established it as one of the biologically important scaffolds. The synthesis of N-(2-aryl-4-oxothiazolidin-3-yl)isonicotinamide by a novel method of stirring and sonication is described. The conventional method for synthesis of 4-thiazolidinones involves use of a Dean-Stark water separator for the removal of water from the reaction with long reaction times (12–48 h), and the stirring procedure also involves the use of DCC (dicyclohexylcarbodiimide) as a dehydrating agent. We report the synthesis of 4-thiazolidinone analogs of isonicotinic acid hydrazide by novel, green route methods of sonication and stirring using molecular sieves. Results indicate that high yields and shorter reaction times can be achieved by employing novel green route methods of synthesis.     

Tricine as a convenient scaffold for the synthesis of C-terminally branched collagen-model peptides

A novel and convenient method for the synthesis of C-terminally branched collagen-model peptides has been achieved using tricine (N-[tris(hydroxymethyl)methyl]glycine) as a branching scaffold and 1,2-diaminoethane or 1,4-diaminobutane as a linker. The peptide sequence was incorporated directly onto the linker and scaffold during solid-phase synthesis without additional manipulations. The resulting branched triple-helical peptides exhibited comparable thermal stabilities to the parent, unbranched sequence, and served as substrates for matrix metalloproteinase-1 (MMP-1). The tricine-based branch reported herein represents the simplest synthetic scaffold for the convenient synthesis of covalently linked homomeric collagen-model triple-helical peptides.     

A short,stereocontrolled, and practical synthesis of alpha-methylomuralide,a potent inhibitor of proteasome function

An efficient and practical synthesis of alpha-methylomuralide (3), a selective inhibitor of proteasomes, has been developed as outlined in Scheme 1. Among the advantages of this route of synthesis over previously described approaches are (1) ease of scale-up and (2) high yields (28% overall yield of alpha-methylomuralide from 6) and stereocontrol (including high enantiocontrol). The synthesis is well suited to the production of 3 in the quantities needed for material-intensive in vivo investigations.     

Diels-alder reactivity of 1-alkoxyphenyl-3-trialkylsiloxy-1,3-dienes

The synthesis of 1-(3,4,5-trimethoxyphenyl)-3-trialkylsiloxy-1,3-butadienes and their Diels-Alder reaction with selected dienophiles at room temperature is described. These aryldienes are useful building blocks for the synthesis of natural and pharmacological active products, as has been shown by the preparation of a tetracyclic ketone needed for the synthesis of new anthracycline analogues.