Sequential Injection Ion Chromatography with Flow Injection Post Column Derivatization Capable of Using the Unstable Reagent Murexide to Determine Calcium and Magnesium in a Mixture

A hyphenated sequential injection ion chromatography–flow injection analysis (SIIC–FIA) system is proposed for post column derivatization capable of using murexide, an unstable but commonly available reagent, for the determination of calcium and magnesium in a mixture. A short ion exchange column was modified from a 4.6 mm × 10 mm C18 monolithic guard column. Calcium/magnesium mixture and murexide were used as model analytes and derivatizing agent, respectively. The FIA post column allows the use of unstable chromogenic reagents. The continuous flow of liquid also helped to stabilize the signal baseline during detection. A single concentration based calibration graph was demonstrated. The system requires low volumes of standard/sample (5–50 µL) and mobile phase (4.50 mL), and offers sample throughput at 8 h^?1 without the need for long column calibration. Detection limits were 0.5 and 0.1 µg for Ca²⁺ and Mg²⁺, respectively. Working ranges were 1–5 µg Ca²⁺ and 0.2–1 µg Mg²⁺. Analyses of well and drinking water samples were demonstrated and validated with the standard complexometric titration.     

Simultaneous Determination of Palladium,Platinum and Rhodium by On‐Line Column Enrichment and a Rapid Column High Performance Liquid Chromatography with 2‐Carboxyl‐1‐Naphthalthiorhodamine as Precolumn Derivatization Reagent

Abstract

In this paper, 2‐carboxyl‐1‐naphthalthiorhodamine (CNTR) was synthesized, and a new method for the simultaneous determination of palladium, platinum, and rhodium ions as metal‐CNTR chelates was developed using rapid column high performance liquid chromatography combined with on‐line enrichment. The palladium, platinum, and rhodium ions were precolumn derivatized with CNTR to form colored chelates. The Pb‐CNTR, Pt‐CNTR, and Rh‐CNTR chelates could be absorbed onto the front of the enrichment column when they were injected into the injector and sent to the enrichment column (ZORBAX Stable Bound, 4.6×10 mm, 1.8 µm) with a buffer solution of 0.05 mol/L sodium acetate–acetic acid buffer solution (pH 3.5) as mobile phase. After enrichment, and by switching the six ports switching valve, the retained chelates were back‐flushed by mobile phase and traveling towards the analytical column. The separation of these chelates on the analytical column (ZORBAX Stable Bound, 4.6×50 mm, 1.8 µm) was satisfactory with 54% methanol (v/v) in 0.05 mol/L sodium acetate buffer (pH 3.5) containing 1 g/L Triton X‐100 as mobile phase. Palladium, platinum, and rhodium were separated completely within 2 min. The detection limits (S/N=3) of palladium, platinum, and rhodium are 1.4 ng/L, 1.2 ng/L, and 1.8 ng/L, respectively. This method was applied to the determination of palladium, platinum, and rhodium in water, urine, and soil samples with good results.     

Development and Validation of the Chiral HPLC Method for Daclatasvir in Gradient Elution Mode on Amylose-Based Immobilized Chiral Stationary Phase

A selective and specific high-performance liquid chromatography method for the determination of daclatasvir enantiomers has been developed and validated. Various immobilized polysaccharide-based chiral stationary phases were used to define a separation strategy utilizing normal-phase and polar organic chromatography modes. Excellent resolution between daclatasvir and its enantiomer was achieved on amylose tris (3-chlorophenylcarbamate) stationary phase, namely CHIRALPAK ID-3, using binary gradient containing acetonitrile:diethylamine and methanol:diethylamine as the mobile phase. The flow rate of the mobile phases was maintained at 1.0 mL min⁻¹ while the column oven temperature was maintained at 40 °C. The column effluent was monitored by UV detection at 315 nm. In comparison with isocratic method, the binary gradient method offered excellent peak shape and improved resolution between daclatasvir and its enantiomer while maintaining the specificity with diastereomers. The method was found to be precise, accurate, and linear (R ² > 0.999). Limit of detection and limit of quantitation of the enantiomer were found to be 0.083 µg mL⁻¹ as and 0.25 µg mL⁻¹, respectively. Recovery of the enantiomer was found to be in the range of 90 to 112 %.

     

Liquid chromatography/electrospray ionization/ion mobility spectrometry of chlorophenols with full flow from large bore LC columns

Chlorophenols (CPs) as a mixture of fourteen congeners from mono- to pentachlorophenol were determined using liquid chromatography/electrospray ionization/ion mobility spectrometry (LC/ESI/IMS) to describe the response and analytical performance of a mobility spectrometer as a detector for liquid chromatography. The mobility spectrometer was equipped with an interface so that flows from a large bore column could be electrosprayed directly into the drift tube at flow rates up to 500 μL/min without splitting of flow. A linear gradient of the mobile phase from 40% to 90% methanol and 60% to 10% acetic acid (AcOH)–ammonium acetate buffer solution over 40 min with a C18 column provided baseline separations though mobility spectra for CPs were influenced by mobile phase composition. Product ions formed from CPs with ESI included phenoxide anions CPO^?, AcOH·CPO^?, CPOH·CPO^?, and Na⁺·(CPO^?)₂ and were found to be governed by the drift gas temperature. Ions were identified using LC/ESI/mass spectrometry (MS) and supported by results from computational modeling. Quantitative response was affected by congener structure through the acidities of the OH moiety and by the composition of the mobile phase. Limits of detection ranged from 0.135 mg/L for 2,3,5-trichlorophenol and pentachlorophenol to 2.23 mg/L for 2-chlorophenol; corresponding linear ranges were 20 and 70.     

Rapid and Highly Sensitive HPLC and TLC Methods for Quantitation of Amlodipine Besilate and Valsartan in Bulk Powder and in Pharmaceutical Dosage Forms and in Human Plasma

Two simple, sensitive, and specific high-performance liquid chromatography and thin-layer chromatography methods were developed for the simultaneous estimation of Amlodipine besilate (AM) and Valsartan (VL). Separation by HPLC was achieved using a xTerra C18 column and methanol /acetonitrile /water/ 0.05% triethylamine in a ratio 40:20:30:10 by volume as mobile phase, pH was adjusted to 3 ± 0.1 with o-phosphoric acid. The flow rate was 1.2 mL min^?1. The linearity range was 0.2 to 2 µg mL^?1 for amlodipine besilate and 0.4 to 4 µg mL^?1 for Valsartan with a mean percentage recovery of 99.59 ± 0.523% and 100.61 ± 0.400% for amlodipine besilate and valsartan, respectively. The TLC method used silica gel 60 F₂₅₄ plates; the optimized mobile phase was ethyl acetate/ methanol / ammonium hydroxide (55:45:5 by volume). Quantitatively, the spots were scanned densitometrically at 237 nm. The range was 0.5–4.0 µg spot^?1 for amlodipine besilate and 2.0–12.0 µg spot^?1 for valsartan. The mean percentages recovery was 99.80 ± 0.451% and 100.61 ± 0.363% for amlodipine besilate and valsartan, respectively. The HPLC method was found to be simple, selective, precise, and reproducible for the estimation of both drugs from spiked human plasma.     

Determination of Nitidine Chloride in Toothpaste by Dual Gradient Two-Dimensional High-Performance Liquid Chromatography

Nitidine chloride in toothpaste was determined by two-dimensional high-performance liquid chromatography. One gradient pump was used to enrich and purify the sample. The analyte was passed into the analytical column by switching a valve following the removal of the sample matrix. The samples were extracted by ultrasonic extraction. A C₁₈ (2.1 mm × 100 mm, 5 µm) column was used in one dimension, and a second C₁₈ (4.6 mm × 250 mm, 5 µm) column was used in the other dimension. The mobile phase was 0.02 mol/L monobasic potassium phosphate and acetonitrile with double isocratic elution. The wavelength of the ultraviolet-visible detector was 328 nm. The linear range for nitidine chloride was between 0.01 and 2 mg/L, with a correlation coefficient greater than 0.9998. The limit of detection for nitidine chloride was 0.01 mg/kg. The mean recoveries were 88.7% to 91.0%, and the relative standard deviation was less than 2.81%. This method is simple, sensitive, and accurate for the determination of nitidine chloride in toothpaste.     

Development and Validation of a UHPLC UV Method for the In-Process Control of Bosentan Monohydrate Synthesis

Bosentan monohydrate (4-tert-butyl-N-[6-(2-hydroxyethoxy)-5-(2-methoxyphenoxy)-2-(pyrimidin-2-yl) pyrimidin-4-yl]benzene-1-sulfonamide monohydrate) is a dual endothelin receptor antagonist (ERA) applied in the treatment of pulmonary arterial hypertension. To achieve effective process control of the bosentan monohydrate synthesis, it was necessary to develop a selective and not highly time-consuming method for ultra-high performance liquid chromatography (UHPLC). The method is characterized by adequate sensitivity, reproducibility and selectivity for the determination of bosentan monohydrate and related compounds from all synthetic stages. The UHPLC separation was carried out by reversed phase chromatography on the Acquity BEH C18 column (100 mm × 2.1 mm, 1.7 µm) with a mobile phase composed of solvent A (0.1 %, v/v, acetic acid in water) and solvent B (methanol), in the gradient mode at the flow rate of 0.4 mL min⁻¹. Limits of detection and quantification for the compounds were ≤0.1 µg mL⁻¹ and 0.3 µg mL⁻¹, respectively. The linearity for all related compounds was investigated as in the range for the active pharmaceutical ingredient (API) and as in the range for the in-process control. The developed method was validated according to the current guidelines, proving the suitability of the method for its intended purpose.

     

Veterinary antimicrobials and antiparasitics in fee-fishing ponds: analytical method and occurrence*

ABSTRACT

The aim of this work was to develop and validate a method using online solid-phase extraction and ultra-high-performance liquid chromatography coupled to tandem mass spectrometry to determine residues of 22 veterinary drugs including sulfonamides, amphenicols, fluoroquinolones, benzimidazoles, trimethoprim (TMP) and oxytetracycline (OTC) in water from fee-fishing ponds. The optimal analytical conditions were as follows: XBridge C8 SPE column, Acquity UPLC CSH C18 analytical column, sample loading with water:methanol (98:2, v/v), mobile phase of water with 0.1% acetic acid:methanol (with gradient elution) and eluent flow rate of 0.3 mL min^?1. Quantification was performed in selected reaction monitoring mode and sulfadimethoxine-d₆, ciprofloxacin-d₈, florfenicol-d₃ and albendazole-d₃ were used as internal standards. Water samples collected from 11 fee-fishing ponds showed the presence of residues of FF (0.42–0.74 µg L^?1), albendazole (0.05–0.31 µg L^?1) and thiabendazole (0.45 µg L^?1). Thiamphenicol and TMP were detected at concentrations lower than the limits of quantification of the method (0.1 and 0.001 µg L^?1, respectively).     

Determination of Ochratoxin A in Poultry Feed by High-Performance Liquid Chromatography with a Monolithic Column

A monolithic column with high-performance liquid chromatography coupled with an ultraviolet detector was investigated for the determination of ochratoxin A in poultry feed. A systematic study was performed using solid phase extraction with a C₁₈ cartridge for sample pretreatment with three solvent systems. Ethyl acetate:methanol:formic acid (95:5:0.5) was found to be the most suitable. Pretreated samples were injected separately into packed and monolithic columns. The effects of the mobile phases on the chromatographic figures of merits were evaluated. Better peak symmetry, improved separation, and more theoretical plates were observed using an acetonitrile:water:formic acid (99:99:2) mobile phase. The repeatability and accuracy of the method were statistically evaluated and found to be satisfactory with a limit of detection of 40 µg L^?1. The use of a monolithic column in conjunction with sample pretreatment provided good results for the determination of ochratoxin A in poultry feed.     

The Development and Validation of a Liquid Chromatography–Tandem Mass Spectrometry Procedure for the Determination of Dioctyldiethylenetriamine Acetate Residues in Soil,Green and Cured Tobacco Leaves Using a Modified QuEChERS Approach

A liquid chromatography with electrospray ionization tandem mass spectrometry method was developed and validated for the determination of dioctyldiethylenetriamine acetate in soil and tobacco. The separation was performed on a Restek Ultra AQ C₁₈ column (2.1?×?100 mm i.d., particle size 3 µm) at 40 °C with a gradient elution. Methanol and trifluoroacetic acid (0.1%) were used as mobile phase, and the flow rate was set at 0.3 mL min^?1. A modified quick, easy, cheap, effective, rugged, and safe (QuEChERS) method was used for sample extraction and cleanup pretreatment. The recovery was tested in the real samples and calculated to be 86.3–97.4%, the relative standard deviations were 1.1–11.9%. The limits of detection and quantitation were 3.3–16.7 and 10–50 µg kg^?1, respectively. The method was demonstrated to be reliable for the routine monitoring of dioctyldiethylenetriamine acetate in tobacco samples.     

HPLC-spectrophotometric detection of trace heavy metals via ‘cascade’ separation and concentration

A cascade pre-concentration and separation system involving continuous solid-phase extraction and one-drop solvent concentration was developed to enable high-performance liquid chromatography (HPLC) determination of trace levels of Ni(II), Co(II), Cu(II), Se(IV) and Cr(VI) ions in aqueous solution via complexation with sodium diethyldithiocarbamate. The metal complexes were almost completely adsorbed on the solid phase (octadecylsilyl packed column). Ethyl acetate (eluent) containing the metal complexes was then placed in a centrifuge tube, to which a microvolume of dimethyl sulfoxide (DMSO) was added. Successful pre-concentration of the metal complexes into the DMSO phase was accomplished by removing the ethyl acetate using a compact evaporator in a water bath (40°C); 1000-fold concentration was achieved within 45 min. A portion of the residual DMSO phase was then subjected to HPLC analysis. The proposed method has high reproducibility and high sensitivity with detection limits (3σ) for Ni(II), Co(II), Cu(II), Se(IV) and Cr(VI) ions of 0.08, 0.11, 0.12, 0.44 and 0.20 µg/L, respectively. Relative standard deviations (RSDs) (n = 5) at Ni(II) 5.87 µg/L, Co(II) 5.89 µg/L, Cu(II) 6.35 µg/L, Se(IV) 7.90 µg/L and Cr(VI) 5.20 µg/L (1.0 × 10^?7 mol/L each) were 4.0%, 4.6%, 4.6%, 7.2% and 3.4%, respectively.     

Quantitative Analysis of Busulfan in Human Plasma by LC-MS–MS

High-performance liquid chromatography with tandem mass spectrometry has been used for rapid, specific, and sensitive analysis of busulfan in human plasma. Busulfan-d₈ was used as internal standard. Analysis was performed on a C₁₈ column (50 mm × 2.1 mm, 3.5-µm particles) with water–methanol 80:20 (v/v) as mobile phase at a flow-rate of 0.30 mL min^?1. Detection was by tandem triple–quadrupole mass spectrometry with turbo ion-spray ionization. Linear calibration plots were obtained over the concentration range 1.096–1,096 ng mL^?1. The assay is ideally suited to monitoring of busulfan and determination of its pharmacokinetic data.     

Quantitative Analysis of Busulfan in Human Plasma by LC-MS–MS

High-performance liquid chromatography with tandem mass spectrometry has been used for rapid, specific, and sensitive analysis of busulfan in human plasma. Busulfan-d₈ was used as internal standard. Analysis was performed on a C₁₈ column (50 mm × 2.1 mm, 3.5-µm particles) with water–methanol 80:20 (v/v) as mobile phase at a flow-rate of 0.30 mL min⁻¹. Detection was by tandem triple–quadrupole mass spectrometry with turbo ion-spray ionization. Linear calibration plots were obtained over the concentration range 1.096–1,096 ng mL⁻¹. The assay is ideally suited to monitoring of busulfan and determination of its pharmacokinetic data.

     

Mercury speciation by a high performance liquid chromatography—atomic fluorescence spectrometry hyphenated system with photo-induced chemical vapour generation reagent in the mobile phase

Speciation of mercury was accomplished by using a simple interface with photo-induced chemical vapour generation in a high performance liquid chromatography—atomic fluorescence spectrometry (HPLC-AFS) hyphenated system. Acetic acid and 2-mercaptoethanol in the mobile phase were used as photochemical reagent. The operating parameters were optimized to give limits of detection of 0.53 µg L^?1, 0.22 µg L^?1, 0.18 µg L^?1 and 0.25 µg L^?1 for inorganic mercury, methylmercury, ethylmercury and phenylmercury, respectively. The method was validated with the certified reference material DORM-2 and applied to the analysis of seafood samples. The HPLC-AFS hyphenated system is simple, environmentally friendly, and represents an attractive alternative to the conventional peroxothiosulfate-borohydride method.     

Enantiomeric Separation of Moxifloxacin and Its (R,R)-Isomer by Ligand-Exchange Chiral Chromatography

A new stereospecific LC method for the separation and quantification of moxifloxacin and its (R,R)-enantiomer in bulk drug was developed and validated by ligand-exchange liquid chromatography on a reversed phase column using aqueous mobile phase containing the chiral reagent l-isoleucine-Cu(II). The UV detector was operated at 293 nm. The flow rate of mobile phase was set at 0.9 mL min^?1. The achiral ODS column offers good separation of the two enantiomers in less than 20 min. The test concentration was 1,000 μg mL^?1 in the mobile phase. This method was capable of detecting the (R,R)-enantiomer of moxifloxacin up to 0.1 μg mL^?1 for a 20 μL injection volume. The drug was subjected to stress conditions of hydrolysis, oxidation, photolysis and thermal degradation. There was no interference of degradants with the (R,R)-enantiomer in the developed method. The developed chiral RP-LC method was validated with respect to linearity, accuracy, precision and robustness. The percentage recovery for the (R,R)-enantiomer in bulk drug samples ranged from 98.1 to 104.4%. The test solution was found to be stable in the mobile phase for 48 h after preparation.     

Comparison of Ion-Pairing and Reversed Phase Liquid Chromatography in Determination of Sulfamethoxazole and Trimethoprim

Abstract

Two simple, rapid, and sensitive HPLC methods have been developed for the simultaneous determination of sulfamethoxazole and trimethoprim in their pure and dosage forms, one utilizing reversed phase HPLC and the other ion-pair HPLC. In the reversed phase HPLC method (A) the mobile phase consists of 0.05% aqueous solution of formic acid with pH adjusted to 4.5±0.2 with triethylamine : acetonitrile:tetrahydrofuran 50 : 49 : 1 (v/v), and the mobile phase pumped at flow rate of 1.0 ml min^?1. An Appolo LC18 column (5.0 µm), 250 mm length × 4.6 mm diameter, was utilized as the stationary phase. Detection was affected spectrophotometrically at 254 nm. In the ion-pair HPLC method (B) the mobile phase consisted of methanol : buffer 35 : 65 (v/v) with the buffer composed of potassium dihydrogen phosphate 0.3 M and sodium heptan sulfonic acid 5.0 mM. To 500 ml of buffer was added 2.0 ml triethylamine, and then the pH was adjusted to 5.0 with phosphoric acid, and the mobile phase was pumped at a flow rate of 1.2 ml min^?1. A Hypersil C₁₈ column (5.0 µm), 150 mm length × 4.6 mm diameter, was utilized as the stationary phase. Detection was affected spectrophotometrically at 254 nm. Linearity ranges for sulfamethoxazole and trimethoprim were 1.0–110 and 1.5–98 µg ml^?1, respectively, with method A and 0.5–100 and 1.0–125 µg ml^?1, respectively, with method (B). Minimum detection limits obtained were 0.1969 and 0.3451 µg ml^?1 for sulfamethoxazole and trimethoprim, respectively, with method A, and 0.1377 and 0.2454 µg ml^?1 with method (B). The proposed methods were further applied to the analysis of tablets containing the two drugs, and the results were satisfied.     

Simultaneous Determination of Maprotiline,Desipramine, and Moclobemide by Reversed-Phase High-Performance Liquid Chromatography and Statistical Optimization

Abstract

A method for separation of three antidepressants, maprotiline, desipramine, and moclobemide, by reversed-phase high-performance liquid chromatography (RP-HPLC) was developed and validated. To find optimal conditions and estimate the impact of individual parameters on the separation, a complete set of 2³ interdependent relationships of the mobile phase composition, temperature, and the volume flow rate were examined. Full separation of the investigated components from a laboratory mixture was achieved on a Supelcosil LC-18 (120 mm × 4.6 mm, 5 µm) column, using two solvent systems, 3% ammonium ion in water/ethanol and acetonitrile, and alternating isocratic gradient–isocratic elution modes. Relevance of the proposed method for therapeutic drug monitoring is anticipated.     

Determination of Nimesulide by Ion Pair High-Performance Liquid Chromatography Using Tetrabutylammonium as the Counterion

A new method for nimesulide was developed using ion-pair reversed phase liquid chromatography and tetrabutylammonium hydrogen sulfate as the ion-pairing reagent. The influence of the ion pair forming reagent concentration, pH, and mobile phase composition on the retention time of nimesulide were studied. The optimum experimental conditions included a C18 column, a mobile phase of a 50/50 (v/v) mixture of acetonitrile and 15 mM phosphate buffer (pH 8.00) containing 6 mM tetrabutylammonium hydrogen sulfate, 25°C, isocratic elution, a flow rate of 1 mL/min, a run time of 10 minutes, and photodiode array detection at 404 nm. From the analysis of the results, the mechanism for the separation of nimesulide was also established. The retention time for nimesulide was 4.76 ± 0.05 min. The method was linear between concentrations of 9 µg/mL to 64 µg/mL, with limits of detection and quantification of 1.111 µg/mL and 3.390 µg/mL, respectively. The method is simple, rapid, accurate, and precise, and successfully applied for the determination of nimesulide in pharmaceutical products.     

Simultaneous determination of ten anticoagulant rodenticides in tissues by column-switching UHPLC-ESI-MS/MS

This paper describes the development of a method for the simultaneous determination of ten anticoagulant rodenticides (coumafuryl, warfarin, pindone, coumatetralyl, coumachlor, difenacoum, bromadiolone, brodifacoum, chlorophacinone and flocoumafen) in the liver and kidney based on column-switching liquid chromatography coupled with heated electrospray ionization tandem mass spectrometry. The simple sample preparation includes extraction with methanol. A C₁₈ trapping column was used for online solid-phase extraction before analytical separation with the mobile phase comprising a mixture of 0.1 % formic acid in water, methanol and acetonitrile. Chromatographic separation was achieved using a Thermo Hypersil ultra high-performance liquid chromatography (UHPLC) C₁₈ column with the mobile phase consisting of 5 mM ammonium formate buffer (pH?=?9) and methanol. The column-switching procedure ensured no matrix effects during electrospray ionization (ESI). Extraction recoveries ranged between 91 and 100 % for liver and between 89 and 97 % for kidney. The method showed good linearity up to 750 ng g^?1. The limit of detection ranged between 0.001 and 0.022 ng g^?1 for liver and between 0.001 and 0.028 ng g^?1 for kidney. The developed method was successfully used in several animal poisoning cases.     

Determination of Melamine in Fresh Milk with Hollow Fiber Liquid Phase Microextraction Based on Ion-Pair Mechanism Combined with High Performance Liquid Chromatography

In this work, a novel analytical method based on hollow fiber liquid phase microextraction (HF-LPME) and high performance liquid chromatography (HPLC) was developed for the analysis of melamine in fresh milk. The conditions of the HF-LPME were investigated and optimized. As a result, a supported liquid membrane containing 6-undecanone and di-2-ethylhexyl phosphoric acid (D2EHPA) was selected. The extractions were made from 25 mL aqueous donor phase (prepared from milk) with pH 5.0 to a more acidic acceptor phase (36 µL 1 M HCl) and the mass transfer was driven by the proton gradient between these phases. Other optimum conditions of the HF-LPME were 60 min extraction time at 360 rpm stirring rate and an extraction factor of 21 times (extraction efficiency 3%) was obtained. The C8 column was operated at 1 mL/min at room temperature and the UV detection wavelength was 240 nm for HPLC. The mobile phase was 10 mM sodium n-octanesulfonate (pH 3.0) mixed with acetonitrile (85:15, v/v). The relative recovery of melamine for milk samples spiked with 0.5–25 mg/kg was in the range of 89.1–120.6% with the RSDs (n = 4) of 4.0–8.5%. It was found that the proposed method provided a linear range from 0.1 to 50 mg/kg (r ²  = 0.9993), method detection limit (MDL) of 0.003 mg/kg and method quantification limit (MQL) of 0.01 mg/kg. The obtained results demonstrated that HF-LPME combined with HPLC is a simple and cheap method for the determination of melamine in fresh milk.