Benzidine/Quinoidal‐Benzidine‐Linked,Superbenzene‐Based π‐Conjugated Chiral Macrocycles and Cyclophanes

Synthesis of fully conjugated cyclophanes containing large‐size polycyclic aromatics is challenging. Now, three benzidine‐linked, hexa‐peri‐hexabenzocoronene (superbenzene)‐based ortho‐, para‐, and meta‐cyclophanes are synthesized through intermolecular Yamamoto coupling reaction of structurally pre‐organized precursors. Subsequent oxidative dehydrogenation gave the corresponding quinoidal benzidine‐linked cyclophanes. Their geometries were confirmed by X‐ray crystallographic analysis and their electronic properties were investigated by electronic absorption, cyclic voltammetry, and DFT calculations. The quinoidal benzidine‐linked cyclophanes show thermally populated paramagnetic activity with a relatively large singlet‐triplet energy gap. Two enantiomers for the ortho‐cyclophanes ( 1‐NH and 1‐N ) were isolated and their chiral figure‐of‐eight macrocyclic structures were identified. The cage‐like cyclophanes 2‐NH and 3‐NH with concave surface can selectively encapsulate fullerene C₇₀.     

Efficient construction of biaryls and macrocyclic cyclophanes via electron-transfer oxidation of Lipshutz cuprates

An efficient method for the homocoupling of aryl halides by electron-transfer oxidation of Lipshutz cuprates (Ar2Cu(CN)Li2) with organic electron acceptors is disclosed. Thus, various types of Lipshutz cuprates are prepared by successive treatment of aryl or heteroaryl bromides with tert-butyllithium and CuCN. The electron-transfer oxidation of Lipshutz cuprates with p-benzoquinones proceeds smoothly to afford the corresponding homocoupling products in moderate to good yields. Furthermore, it can be applied to the construction of either thiophene- or benzene-fused 10-membered ring cyclophanes. For the synthesis of 10-membered cyclophanes, the linear C-Cu-C structure of Lipshutz cuprates should be maintained in the dimetallacyclic intermediates, producing the large ring cyclophanes efficiently. The X-ray analysis of the cyclophanes reveals that the difference in the bridging atoms results in the different conformations of the macrocyclic rings. Thus, the silicon-bridged cyclophane 5a adopts a D2-symmetric structure with a twisted rhombic arrangement of four thiophene rings, whereas the methylene- and oxygen-bridged cyclophanes 5b and 5c possess C2h- and C2-symmetric structures with chair- and boatlike conformations, respectively. The 1H NMR spectrum of C2-symmetric 5c is temperature-dependent, and the activation energy (DeltaG) for the conformational change is 10.1 kcal/mol.     

Synthesis of diynes and tetraynes from in situ desilylation/dimerization of acetylenes

[reaction: see text]. An efficient method for the in situ desilylation/oxidative dimerization of (trialkylsilyl)acetylenes is described. This protocol avoids the complications encountered with sensitive diynes by eliminating the deprotection and isolation steps. Various aromatic and alkyl diynes and tetraynes can be synthesized in a straightforward manner in good yields (82-99%) from TIPS-protected acetylenes. This method facilitates the efficient synthesis of novel tetrayne-bridged acetylenic cyclophanes 6 and 7 in a direct manner.     

Photodimerization of benzenes in strained dihetera[3.3]metacyclophanes

Double- to quadruple-layered dihetera[3.3]metacyclophanes containing O, S, and Se atoms in the bridge chains were synthesized by the usual methods. On irradiation, three quadruple-layered cyclophanes 1a–c undergo a photodimerization of two inner benzenes to give good yields of novel cage compounds 2a–c which revert thermally to the starting cyclophanes. The driving forces for such intriguing photoreactions were studied with respect to the strain of the benzene, effect of chalcogen atom species, interfacial constraint, etc., using several reference cyclophanes. It is concluded that the face-to-face stacking of two fairly strained benzene nuclei is responsible for the photodimerization and the two outer benzenes are required for the effective interconversion between quadruple-layered diheteracyclophanes and their isomeric cage compounds.     

[2~3]Cyclophanes电子结构的理论研究

用改造的重叠模型多重散射X~α自洽场方法计算环芳类化合物[2~3]cyclophanes的电子结构, 分析该类分子中分子轨道通过空间和通过键的相互作用,单键连接桥.双键连接桥对通过键相互作用的影响, 用过渡态理论方法计算分子前线分子轨道的电离能,理论结果与紫外光电子能谙符合较好.     

Elimination of the 4-hydroxyl group of the alkaloids related to morphine—II

Dihydrothebaine-φ, dihydrothebainone-Δ⁵-enol methylether and dihydrothebainone were converted to the respective 4-phenylethers by Ullmann reaction in good yields. These phenylether derivatives were reduced to 4-desoxy compounds by sodium-liquid ammonia reduction.

Clemmensen reduction of the phenylether and the desoxy derivatives gave (-)-3-methoxy-4-phenoxy-N-methyl-morphinan and (-)-3-methoxy-N-methylmorphinan respectively.     

Sulfoximine version of double elimination protocol for synthesis of chiral acetylenic cyclophanes

A new strategy for constructing enantiopure acetylenic cyclophanes is described on the basis of one-pot double elimination reaction starting from dialdehydes and bis(sulfoximine)s. In this case, the conventional sulfone protocol affords poorer yields of the desired cyclophanes. Thus, arylene-ethynylene moieties with terminal sulfoximine or formyl functions are linked to binaphthyl cores and these building blocks are then subjected to double elimination reaction. The desired macrocycles are obtained in up to 35 % yield. The corresponding Sonogashira coupling fails to afford cyclophanes indicative of effectiveness of the double elimination methodology.     

Molecular Pacman: folding, inclusion, and X-ray structures of tri- and tetraamino piperazine cyclophanes

Reaction of piperazine and 1,3-bis(bromomethyl)-2-nitrobenzene under high-dilution conditions yields cyclic trimeric trinitro, tetrameric tetranitro, and pentameric pentanitro piperazine cyclophanes. Reduction of the nitro groups with SnCl(2) under acidic conditions produces the corresponding triamino and tetraamino piperazine cyclophanes. The solution studies of both nitro and amino piperazine cyclophanes at 30 degrees C by (1)H NMR spectroscopy shows symmetrical structures owing to the fast conformational exchange, whereas the low temperature studies of the tetraamino piperazine cyclophane reveals interesting dynamic behavior that indicates additional intramolecular interactions. Careful crystallizations of the trimeric trinitro and triamino and the tetrameric tetraamino cyclophanes resulted in crystals suitable for X-ray diffraction studies. In the crystalline state the amino-functionalized cyclophanes manifest an extraordinary circular intramolecular hydrogen-bonding network that leads to a fixed 3D structure. Hydrogen bonding in the triamino trimer leads to orientation of all three of the amino groups on the same side of the macrocycle, namely, the rcc conformation, whereas the tetraamino tetramer folds into a more compact shell-like conformation. During the crystallization process one acetonitrile guest is enclosed into the cavity of the tetraamino cyclophane, which gives a crystalline inclusion complex with remarkable resemblance to the famous Pacman motif. The folding, which mimics the behavior of some cyclic peptides and pyrroles, is induced by intramolecular hydrogen bonding from the amino groups to the tertiary amine groups of the piperazines. The cavity of the tetraamino tetramer is markedly smaller than in the corresponding, but nonfolded, tetranitro tetramer and the guest/host volume ratio (packing coefficient) for the acetonitrile and the cavity is approximately 50 %, which indicates a good size match for acetonitrile inclusion.     

Structure—Property relationships for exciton transfer in conjugated polymers

The ability of conjugated polymers to function as electronic materials is dependent on the efficient transport of excitons along the polymer chain. Generally, the photophysics of the chromophore monomer dictate the excited state behavior of the corresponding conjugated polymers. Different molecular structures are examined to study the role of excited state lifetimes and molecular conformations on energy transfer. The incorporation of rigid, three‐dimensional scaffolds, such as iptycenes and cyclophanes, can encourage an oblique packing of the chromophore units of a conjugated polymer, thus allowing the formation of electronically‐coupled aggregates that retain high quantum yields of emission. Rigid iptycene scaffolds also act as excellent structural directors that encourage complete solvation of PPEs in a liquid crystal (LC) solvent. LC‐PPE mixtures display both an enhanced conformational alignment of polymer chains and extended effective conjugation lengths relative to isotropic solutions, which leads to enhanced energy transfer. Facile exciton migration in poly(p‐phenylene ethynylene)s (PPEs) allows energy absorbed over large areas to be funneled into traps created by the binding of analytes, resulting in signal amplification in sensory devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Modular synthesis of pi-acceptor cyclophanes derived from 1,4,5,8-naphthalenetetracarboxylic diimide and 1,5-dinitronaphthalene

Three neutral cyclophanes were synthesized, and their association with indole, an aromatic pi-donor, was studied. The cyclophanes were designed to contain a rigid, hydrophobic binding cavity with 1,4,5,8-naphthalenetetracarboxylic diimide or 1,5-dinitronaphthalene as the pi-acceptor. Two of the cyclophanes also contain a (S)-(valine-leucine-alanine) tripeptide unit to provide chiral hydrogen bonding interactions with guest molecules. Despite the fact that these cyclophanes contain a hydrophobic binding cavity of appropriate dimensions, their association with indole is very weak. In the case of cyclophanes derived from 1,5-dinitronaphthalene, steric interactions force the nitro groups out of the plane of the naphthalene ring, diminishing their effectiveness as pi-acceptors. A simple UV--visible titrimetric method, using N,N,N',N'-tetramethyl-1,4-phenylenediamine (TMPD) as a pi-donor, was used to rank the pi-acceptor strength of these and other aromatic units. These titrations show that 1,4,5,8-naphthalenetetracarboxylic diimide and 1,5-dinitronaphthalene derivatives are weaker pi-acceptors than viologens, which make good pi-acceptor cyclophanes. Methyl viologen is in turn a weaker pi-acceptor than anthaquinone disulfonate, suggesting that the latter may serve as a useful building block for pi-accepting cyclophane hosts.     

Palladium‐catalyzed dehalogenation of 5‐halopyrazoles

A new and efficient method for the dehalogenation of 5‐halopyrazoles was developed by using the catalytic amount of palladium (II) chloride and triphenylphosphine as a ligand at reflux under constant flow of hydrogen gas. The reaction gave the corresponding pyrazole products in good to excellent yields (≥83%). J. Heterocyclic Chem., (2012).     

Palladium-Catalyzed Enantioselective C−H Olefination to Access Planar-Chiral Cyclophanes by Dynamic Kinetic Resolution

Planar-chiral cyclophanes have received increasing attention for drug discovery and catalyst design. However, the catalytically asymmetric synthesis of planar-chiral cyclophanes has been a longstanding challenge. We describe the first Pd(II)-catalyzed enantioselective C−H olefination of prochiral cyclophanes. The low rotational barrier of less hindered benzene ring in the substrates allows the reaction to proceed through a dynamic kinetic resolution. This approach exhibits broad substrate scope, providing the planar-chiral cyclophanes in high yields (up to 99 %) with excellent enantioselectivities (up to >99 % ee). The ansa chain length scope studies reveal that the chirality of the cyclophanes arises from the bond rotation constraint of the benzene ring around the macrocycle plane, rather than the C−N axis. The C−H activation approach is also applicable to the late-stage modification of bioactive molecules and pharmaceuticals.     

One-Step Synthesis of Cyclophanes as Crystalline Sponge and Their [2]Catenanes through SNAr Reactions

This work reports that cyclophanes and their [2]catenanes were synthesized by the S_NAr reactions of disubstituted adamantanes bearing halophenol units and 3,6-dichlorotetrazine in moderate yields. In the crystalline state, the cyclophanes had hexagonal structures with a cavity. The [2]catenanes were composed of two macrocycles that were singly interlocked and orthogonally arranged, indicating the construction from eight component molecules through eight C−O bonds in a one-step reaction in up to 33 % yield. The cyclophanes were assembled to afford a supramolecular organic framework in the solid state, which exhibited permanent intrinsic porosity and adsorption of leaf alcohol or aldehyde in a single-crystal to single-crystal fashion. The molecular structures of the liquid guests were determined by single-crystal X-ray analysis. The formation of catenanes and the use of cyclophane-based porous crystals in the crystalline sponge method may be largely ascribed to the solvophobic effects and the van der Waals interactions that originate in the aliphatic and bulky nature of the adamantane units.     

1,x-elimination reactions: extending the limits of a classical organic reaction

Alpha,omega-dibromo derivatives in which the two terminal carbon atom are separated by an unsaturated spacer unit ("pi spacer") undergo 1,x-elimination reactions (with x=6, 8, 10, and 14), using Mori's reagent (nBu3SnSiMe3/CsF). The resulting cumulenic intermediates cyclodimerize in a subsequent step yielding novel macrocyclic acetylenic and bridged aromatic compounds (cyclophanes). Thus 1,6-eliminations were carried out with dibromide 17 to yield 1,3,7,9-cyclododecatetrayne (20) and with benzylbromide 24 to provide cyclophanes 26 and 27. By 1,8-eliminations the 16-membered macrocycle 33 could be prepared from enediyne 31, the benzannelated 1,5-cyclooctadiyne 41 from dibromide 38, and a mixture of cyclophanes 45 and 46 from the precursor 43. 1,10-Eliminations were carried out successfully with dibromides 47, 50, and 53 yielding the corresponding unsaturated cyclophanes ("cyclophynes") 49, 52, and 55. The influence of the solvent on the cyclodimerization 47-->49 was investigated, with acetonitrile providing the highest yields. The heterophanes 59 a and b were obtained by 1,10-elimination of the precursor dibromides 57 a and b, and in an elimination experiment involving a 1:1 mixture of the dibromides 50 and 57 b the "mixed dimer" 60 was isolated, besides the homodimers 52 and 59 b. The method reached its limits with the 1,14-elimination of 68, 70, and 74 providing the cyclophanes 69, 71, and 75 in varying amounts. Two final debrominations with 76 and 77, which in principle could undergo 1,16- and 1,20-eliminations reactions, respectively, failed. The structures of the new cyclophanes 49, 50, 59 a, and 59 b were established by X-ray structural analysis; all other structure assignments rest on the usual spectroscopic and analytical data.     

Benzidine/Quinoidal-Benzidine-Linked,Superbenzene-Based π-Conjugated Chiral Macrocycles and Cyclophanes

Synthesis of fully conjugated cyclophanes containing large-size polycyclic aromatics is challenging. Now, three benzidine-linked, hexa-peri-hexabenzocoronene (superbenzene)-based ortho-, para-, and meta-cyclophanes are synthesized through intermolecular Yamamoto coupling reaction of structurally pre-organized precursors. Subsequent oxidative dehydrogenation gave the corresponding quinoidal benzidine-linked cyclophanes. Their geometries were confirmed by X-ray crystallographic analysis and their electronic properties were investigated by electronic absorption, cyclic voltammetry, and DFT calculations. The quinoidal benzidine-linked cyclophanes show thermally populated paramagnetic activity with a relatively large singlet-triplet energy gap. Two enantiomers for the ortho-cyclophanes ( 1-NH and 1-N ) were isolated and their chiral figure-of-eight macrocyclic structures were identified. The cage-like cyclophanes 2-NH and 3-NH with concave surface can selectively encapsulate fullerene C₇₀.     

Photochemistry of large ring 2-phenylcycloalkanones and 2,n-diphenylcycloalkanones

Photolysis of the title compounds (n=10, 11, 12, 15) yields mainly cyclophanes. The product distribution depends on temperature and solvent.     

Cyclophanes: Simulation of the formation enthalpy by quantum-chemical methods

Comparison of experimental values of gas-phase formation enthalpy of cyclophanes with the results of semiempirical quantum-chemical simulation has revealed good linear correlation with the PM-3 data. Using the derived equation, formation enthalpies of 30 cyclophanes have been predicted.     

Diastereo‐ and Regioselective Addition of Thioamide Dianions to Imines and Aziridines: Synthesis of N‐Thioacyl‐1,2‐diamines and N‐Thioacyl‐1,3‐diamines

Addition reactions of thioamide dianions that were derived from N‐arylmethyl thioamides to imines and aziridines were carried out. The reactions of imines gave the addition products of N‐thioacyl‐1,2‐diamines in a highly diastereoselective manner in good‐to‐excellent yields. The diastereomeric purity of these N‐thioacyl‐1,2‐diamines could be enriched by simple recrystallization. The reduction of N‐thioacyl‐1,2‐diamines with LiAlH₄ gave their corresponding 1,2‐diamines in moderate‐to‐good yields with retention of their stereochemistry. The oxidative‐desulfurization/cyclization of an N‐thioacyl‐1,2‐diamine in CuCl₂/O₂ and I₂/pyridine systems gave the cyclized product in moderate yield and the trans isomer was obtained as the sole product. On the other hand, a similar cyclization reaction with antiformin (aq. NaClO) as an oxidant gave the cis isomer as the major product. The reactions of N‐tosylaziridines gave the addition products of N‐thioacyl‐1,3‐diamines with low diastereoselectivity but high regioselectivity and in good‐to‐excellent yields. The use of AlMe₃ as an additive improved the efficiency and regioselectivity of the reaction. The stereochemistry of the obtained products was determined by X‐ray diffraction.     

Access to Indoles via Diels–Alder Reactions of 5‐Methylthio‐2‐vinylpyrroles with Maleimides

Diels–Alder reactions of 5‐methylthio‐2‐vinyl‐1H‐pyrroles with maleimides followed by isomerization gave tetrahydroindoles in moderate to good yield. Aromatization using activated MnO₂ in refluxing toluene gave the corresponding 2‐methylthioindoles in good yields, and demethylthioation using Raney nickel gave the 2‐H indoles in excellent yields. The protection of the adducts produced aromatization in improved yield, demonstrating the effectiveness of the methylthio group as a protecting group for pyrroles; however, 5‐methylthio‐2‐vinylpyrrole was shown to perform with slightly less efficiency than 2‐vinylpyrrole in Diels–Alder reactions, indicating the protective group was more deactivating than desired. This route toward indoles offers high convergency and conveniently available starting materials that are easily purified. Bis‐methylthioated vinylpyrroles were shown to have potential as highly activated Diels–Alder dienes.     

Design and synthesis of ninhydrin-based cyclophanes as potential neutral receptors for quaternary ammonium cations

Four ninhydrin-based cyclophanes 4a, 4b, 6a, and 6b were designed and synthesized. Two rectangular type cyclophanes (4a and 4b) and two square type cyclophanes (6a and 6b) were prepared in 8-43% yields.