Isomerization of trans-[Ru(PTA)4Cl2] to cis-[Ru(PTA)4Cl2] in water and organic solvent: revisiting the chemistry of [Ru(PTA)4Cl2

trans-[Ru(PTA)4Cl2] (trans-1), (PTA = 1,3,5-triaza-7-phosphatricyclo[3.3.1.13,7]decane) has been isolated and structurally characterized by X-ray crystallography. The structure reveals ruthenium in a slightly distorted-octahedral environment bound to two axial chlorides and four equatorial PTA ligands. In organic solvents, trans-1 undergoes a relatively clean isomerization to cis-1. In aqueous environments, trans-1 undergoes a more complicated transformation involving isomerization, protonation, and ligand substitution affording cis-1 and a series of structurally related molecules. From these results, we conclude that the synthesis of [Ru(PTA)4Cl2] (1) affords trans-1, not cis-1, as earlier reports suggest. The water-soluble hydride cis-[Ru(PTA)4H2] (2) has also been synthesized from the reaction of trans-[Ru(PTA)4Cl2] with excess sodium formate. Compound 2 is stable in deoxygenated water and undergoes H/D exchange with D2O (t1/2 approximately equal to 120 min, at 25 degrees C). The solid-state structures of both trans-1 and 2 are described.     

Reactions of [Ru(CO)3Cl2]2 with aromatic nitrogen donor ligands in alcoholic media

The reactions of mono‐ and bidentate aromatic nitrogen‐containing ligands with [Ru(CO)₃Cl₂]₂ in alcohols have been studied. In alcoholic media the nitrogen ligands act as bases promoting acidic behaviour of alcohols and the formation of alkoxy carbonyls [Ru(N–N)(CO)₂Cl(COOR)] and [Ru(N)₂(CO)₂Cl(COOR)]. Other products are monomers of type [Ru(N)(CO)₃Cl₂], bridged complexes such as [Ru(CO)₃Cl₂]₂(N), and ion pairs of the type [Ru(CO)₃Cl₃]^? [Ru(N–N)(CO)₃Cl]⁺ (N–N = chelating aromatic nitrogen ligand, N = non‐chelating or bridging ligand). The reaction and the product distribution can be controlled by adjusting the reaction stoichiometry. The reactivity of the new ruthenium complexes was tested in 1‐hexene hydroformylation. The activity can be associated with the degree of stability of the complexes and the ruthenium–ligand interaction. Chelating or bridging nitrogen ligands suppresses the activity strongly compared with the bare ruthenium carbonyl chloride, while the decrease in activity is less pronounced with monodentate ligands. A plausible catalytic cycle is proposed and discussed in terms of ligand–ruthenium interactions. The reactivity of the ligands as well as the catalytic cycle was studied in detail using the computational DFT methods. Copyright © 2005 John Wiley & Sons, Ltd.     

A practical and highly efficient transfer hydrogenation of aryl azides using a [Ru(p-cymene)Cl2]2 catalyst and sodium borohydride

Various aniline derivatives were synthesized by selective reduction of aryl azides in the presence of a dichloro(p-cymene)ruthenium(II) dimer ([Ru(p-cymene)Cl₂]₂) via hydrolysis of sodium borohydride. The hydrogenation reactions were carried out in aqueous media at room temperature. Most of the reactions were completed within 10 min with quantitative yields.     

Synthesis of novel poly(hydroxyether terephthalate) via polyaddition of 2,5-difluoroterephthalic acid with aromatic bis(epoxide)s

A novel and more reliable synthetic route to 2,5-difluoroterephthalic acid was developed. A series of new poly(hydroxyether terephthalate) were prepared by the polyaddition of 2,5-difluoroterephthalic acid with various aromatic bis(epoxide)s catalyzed by tetrabutyl ammonium bromide.     

Selective dimerization of arylalkynes to (E)-1,4-diaryl enynes catalyzed by the [Ru(p-cymene)Cl(2)](2)/acetic acid system under phosphine-free conditions

The commercially available di-mu-chlorobis[(p-cymene)chlororuthenium(II)] complex catalyzes the dimerization of aromatic alkynes in acetic acid at room temperature to form the corresponding (E)-1,4-diarylbut-1-ene-3-yne derivatives, with high stereoselectivity. The procedure does not require the use of additives and can be carried out in the presence of water or aprotic cosolvents, under homogeneous conditions.     

Elimination of sulfur from aromatic heterocycles by a water-soluble arene ruthenium cluster: synthesis and molecular structure of [H2S2Ru4(C6H6)4]Cl2

C-S bond cleavage in thiophene, benzothiophene and dibenzothiophene is achieved under biphasic conditions by the water-soluble cluster cation [H(4)Ru(4)(C(6)H(6))(4)](2+) which is converted into the disulfido cluster [H(2)S(2)Ru(4)(C(6)H(6))(4)](2+).     

Catalytic oxidation-reduction disproportionation of phenylhydrazine by the action of [Ru(NH3)5Cl]Cl2

Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 943–944, April, 1988.     

Photogeneration of metastable side-on N2 linkage isomers in [Ru(NH3)5N2]Cl2, [Ru(NH3)5N2]Br2 and [Os(NH3)5N2]Cl2

Photogeneration of side-on N2 linkage isomers in [Ru(NH3)5N2]2+ and [Os(NH3)5N2]2+ is achieved by irradiation with lambda = 325 nm of powder samples at T = 80 K and detected by the downshift of the nu(N-N) vibration and by the heat release at elevated temperature due to the back switching of the side-on configuration to the ground state. The concentration of the transferred molecules is evaluated by the decrease of the area of the nu(N-N) or 2nu(N-N) vibrational bands. All characteristic changes between the linear Ru-N-N and side-on configuration are predicted by DFT calculations: the structure of the anion, shifts of the vibrations, electronic excitation energy, energetic position and sequence of the electronic orbitals, the potentials of the ground and relaxed metastable state with the activation energy, saddle points and energetic position of the minimum.     

Synthesis of high molecular weight polystyrene and poly(methyl methacrylate) with low polydispersity by [Cp2ZrCl2] catalyzed aqueous polymerization

An early transition metal metallocene compound, Cp₂ZrCl₂, with an anionic surfactant, sodium n‐dodecyl sulfate (SDS) as emulsifier has been found to be an effective catalyst for polymerization of monomers like styrene and methylmethacrylate in aqueous medium. The molecular weights of the polymers have been found to be very high with low molecular weight distribution. The added surfactant has been found to play the dual role of stabilizer of the cation as well as an emulsifying agent for the monomer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3797–3803, 2005     

Thermal decompositions of [Co(py)4Cl2]2PbCl6 and [Ru(dipy)3]PbCl6

The thermal decompositions of [Co(py)₄.Cl₂]₂PbCl₆ and [Ru(dipy)₃]PbCl₆ were examined by dynamic thermoanalytical methods and under isothermal conditions permitting quantitative determination of some of the reaction products. A comparative study of the corresponding chloride salts was also performed. Both groups of compounds decompose with the liberation of chlorine and organic ligands (and H₂O in the case of the hydrates of the chlorides), and the process is accompanied by the simultaneous transitions Pb(4 +)Pb(2 +) and Co(3 +) Co(2 +). The ruthenium complex salts initially decompose without a change in the oxidation state of the Ru atom, but upon thermal treatment of the hexachloroplumbate certain chlorination products of the organic ligands are formed.

---

Zusammenfassung Mit Hilfe dynamischer thermoanalytischer Methoden und unter die quantitative Bestimmung einiger Reaktionsprodukte ermöglichenden isothermen Bedingungen wurde die thermische Zersetzung von [Co(py)₄Cl₂]₂PbCl₆ und [Ru(dipy)₃]PbCl₆ untersucht. Eine vergleichende Betrachtung der korrespondierenden Chloride wurde ebenfalls durchgeführt. Die Zersetzung beider Verbindungsgruppen geschieht unter Freisetzung von Chlor und organischen Liganden (bei den Hydraten der Chloride auch von Wasser) und ist von den übergängen Pb(4 +) Pb(2 +) bzw. (Co(3 +) Co(2 +) begleitet. Die Komplexsalze des Rutheniums zersetzen sich anfangs ohne Änderung der Oxydationsstufe des Rutheniumatoms, es bilden sich allerdings infolge von Wärmezufuhr aus dem Hexachloroplumbat verschiedene Chlorprodukte der organischen Liganden.

---

[Co(py)₄l₂]₂PbCl₆ [Ru(dipy)₃]PbCl₆ , . . , . . , .

     

Enantioselective epoxidation reaction of non-functionalised prochiral alkenes using optically resolved [brucine](R)-[Ru(PDTA-H)Cl] and [brucine](S)-[Ru(PDTA-H)Cl] complexes

The racemic metal complex K[Ru(PDTA-H)Cl]¹ has been resolved into its optical isomers using brucine as the resolving agent counter ion, [brucine](S)-[Ru(PDTA-H)Cl] (1) and [brucine](R)-[Ru(PDTA-H)Cl] (2) and their structures are determined by single crystal X-ray methods. Longer Ru–Cl bonds in both the complexes (2.3974(13)A in 1 and 2.415(6) in 2 along with one relatively weaker and strained chelation ring could be responsible for their catalytic activity. The CD pattern of the complex 1 shows the presence of the two isomers λ and δ with more contribution of λ form while the complex 2 acquire only λ conformation. Catalytic activity of 1 and 2 for enantioselective epoxidation of non-functionalised alkenes viz. styrene, 4-chloro-, 4-methyl-, 4-nitrostyrene, 1,2-dihydronaphthalene and indene was accomplished by using molecular oxygen and iodosyl benzene as terminal oxidant. Excellent conversions (85–89%) were obtained in case of 1,2-dihydronaphthalene with both the catalysts while catalyst 2 gave good conversion with styrene and 4-methylstyrene. The enantiomeric excess of the epoxide was determined by ¹H NMR using chiral shift reagent Eu(hfc)₃/ by chiral capillary column. The extent of enantioselectivity with respect to the substituents on substrate is shown on Hammet plot. A possible mechanism at the oxo transfer stage is also envisaged.     

One-pot synthesis of substituted benzene via intermolecular [2+2+2] cycloaddition catalyzed by air-stable Ru(II)-complex

Intermolecular [2+2+2] cycloaddition reaction employing an air-stable ruthenium perchloro-cyclobutenonyl complex as a catalyst is reported. A series of internal alkynes were incorporated with dimethyl acetylene-dicarboxylate in a ratio of 1:2 to give various substituted benzenes in high yield and high chemoselectivity.     

Catenane gel: synthesis of high molecular weight poly[2]catenanes by Sonogashira coupling polymerization

A first catenane polymer gel was obtained by Sonogashira coupling reaction of diiodo[2]catenane and 4,4′-diethynylbiphenyl. Because of the linearity and rigidity of the ethynylene group formed in the coupling reaction, the formation of undesired cyclic dimer was inhibited, and a very high molecular weight (M_n > 2.3 × 10⁵) poly[2]catenane was synthesized. The polymer was gelated without any chemical cross-linkage and swelled in DMF.     

One-step synthesis of low polydispersity, biotinylated poly(N-isopropylacrylamide) by ATRP

Low polydispersity poly(N-isopropylacrylamide) with a biotin end-group was obtained in one step from a biotinylated initiator for atom transfer radical polymerization and interacted with streptavidin to generate the thermosensitive polymer-protein conjugate.     

Ni(xbsms)Ru(CO)2Cl2]: a bioinspired nickel-ruthenium functional model of [NiFe] hydrogenase

As a model of the active site of [NiFe] hydrogenases, a dinuclear nickel-ruthenium complex [Ni(xbsms)Ru(CO)2Cl2] was synthesized and fully characterized. The three-dimensional structure reveals a nickel center in a square-planar dithioether-dithiolate environment connected to a ruthenium moiety via a Ni(mu-SR)2Ru bridge. This complex catalyzes hydrogen evolution by electroreduction of the weakly acidic Et3NH+ ions in N,N-dimethylformamide and is therefore the first functional bioinspired model of [NiFe] hydrogenases.