Inclusion of ferrocene in a cyclodextrin-functionalized layered metal hydroxide: a new organometallic--organic-LDH nanohybrid

Cyclodextrin cavities have been grafted into a layered metal hydroxide to create hydrophobic nanopockets within the galleries of the inorganic solid. Neutral ferrocene molecules can be included within the grafted cavities by partitioning from a polar solvent to generate a new organometallic-organic-inorganic hybrid. The included ferrocene has been characterized by electronic and Raman spectroscopy. The capability of the cyclodextrin-functionalized solid to separate hydrophobic and hydrophilic derivatives of ferrocene is demonstrated.     

Small-angle neutron scattering on a core-shell colloidal system: a contrast-variation study

Small-angle neutron scattering (SANS) measurements are reported on a sterically stabilized, core-shell colloidal system using contrast variation. Aqueous dispersions of polystyrene particles bearing grafted poly(ethylene glycol) (PEG) have been studied over a large range of particle concentrations and two different solvent conditions for the PEG polymer. SANS data are analyzed quantitatively by modeling the particles as core-shell colloids. In a good solvent and under particle contrast conditions, an effective hard-sphere interaction captures excluded-volume interactions up to high concentrations. Contrast variation, through isotopic substitution of both the core and solvent, expedite a detailed study of the PEG layer, both in the dilute limit and as a function of the particle concentration. Upon diminishing the solvent quality, subtle changes in the PEG layer translate into attractions among particles of moderate magnitude.     

Steric stabilization of spherical colloidal particles: Implicit and explicit solvent

We present the results of Monte Carlo simulations and density functional theory treatment of interactions between spherical colloidal brushes both in implicit (good) solvent and in an explicit polymeric solution. Overall, theory is seen to be in good agreement with simulations. We find that interactions between hard-sphere particles grafted with hard-sphere chains are always repulsive in implicit solvent. The range and steepness of the repulsive interaction is sensitive to the grafting density and the length of the grafted chains. When the brushes are immersed in an explicit solvent of hard-sphere chains, a weak mid-range attraction arises, provided the length of the free chains exceeds that of the grafted chains.     

Structure and dynamics of dextran in binary mixtures of a good and a bad solvent

The structure and dynamics of the common polysaccharide dextran have been investigated in mixed solvents at two different temperatures using small-angle X-ray scattering (SAXS) and viscosity measurements. More specifically, binary mixtures of a good solvent (water, formamide, dimethylsulfoxide, ethanolamine) and the bad solvent ethanol as the minority component have been considered. The experimentally observed effects on the polymer conformation (intrinsic viscosity, coil radius, and radius of gyration) of the bad solvent addition are discussed in terms of hydrogen bonding density and are correlated with the Hansen solubility parameters and the surface tension of the solvent mixtures. Hydrogen bonding appears to be an important contributor to the solubility of dextran but is not sufficient to capture the dextran coil contraction in the mixtures of good+bad solvents.     

Polyelectrolyte brushes

The simple scaling theory of weakly-charged polyelectrolyte brush (the layer of polyelectrolyte chains grafted at one end onto an impermeable surface) immersed into a good solvent has been developed.The asymptotic scaling dependences of the free layer thickness on charge density and solvent strength are obtained. The behavior of polyelectrolyte brush subjected to normal and tangential external forces is considered. New “polyelectrolyte effect” is predicted: shear of a free polyelectrolyte brush leads to a decrease in brush thickness in contrast to the case of a free neutral brush. Such behavior is equivalent to that of a neutral brush subjected to external normal stretching force. This force in the case of polyelectrolyte brush is created by the osmotic pressure of mobile counterions neutralizing grafted chain charges.     

Dynamic mechanical thermal and infrared analyses of polyacrylonitrile “electrografted” onto a metal

Polyacrylonitrile (PAN) films have been “grafted” onto copper electrodes by cathodic polarization and analyzed by infrared spectroscopy and dynamic mechanical thermal analysis (DMTA). The dynamic mechanical response shows two or three transitions depending on the film thickness and the potential deposition. The viscoelastic properties of “ungrafted” PAN films, e.g., solvent cast films of commercially available PAN, are deeply different from those of “electrografted” films. The experimental data support that “ungrafted” chains are paracrystalline in contrast to the “grafted” ones which are essentially amorphous. Moreover, the irreversible transformation of the “grafted” PAN chains observed beyond 225°C is confirmed by Fourier transform infrared (FTIR) analysis and ascribed to an intramolecular cyclization of PAN into polyimine. This reaction occurs rapidly and at a comparatively low temperature with respect to “ungrafted” PAN, which suggests that the “grafted” chain configuration might be predominantly isotactic. The isotacticity and the amorphous structure appear to decrease as the thickness of the PAN film is increased. Literature data and the herein reported observations would suggest a dependence of the amorphous structure of PAN on the chain isotacticity. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 543–553, 1998     

Phase equilibria in polymer/solvent systems. Part V: Thermodynamic theory of the swelling pressure equilibrium of a crosslinked substance with a solvent in various phases

A thermodynamic theory has been developed to define the swelling pressure equilibrium between a homogeneous gel and a pure solvent, where phase transitions of the solvent, such as evaporation and crystallization can occur. It is shown that the equilibrium curve, which describes the temperature dependence of the composition in the gel phase under the condition of a constant swelling pressure, has distinct bends at the transition temperatures. These bends are related to the enthalpies of transition of the pure solvent at the transition temperatures. As a consequence of the phase transition of the solvent the swelling pressure-temperature curve at constant composition of the gel shows a discontinuous behavior at the transition point. Numerical calculations with a modified Flory-Huggins expression, based on results of swelling and deswelling measurements of the system crosslinked PEG/water, are presented.The discussion includes natural systems, which are in the gel state, where water may crystallize in the extracellular space.     

Cationic Grafting of Vinyl Polymers onto a Carbon Whisker,Initiated by Acylium Perchlorate Groups Introduced onto the Surface

Abstract

The cationic graft polymerization of vinyl monomers onto a carbon whisker, vapor-grown carbon fiber, initiated by acylium perchlorate groups introduced onto the surface, was investigated. The introduction of acylium perchlorate groups onto a carbon whisker was achieved by the treatment of a carbon whisker having acyl chloride groups, which were introduced by the reaction of surface carboxyl groups with thionyl chloride, with silver perchlorate in nitrobenzene. It was found that the cationic polymerization of vinyl monomers, such as styrene, indene, N-vinyl-2-pyrrolidone, and n-butyl vinyl ether, is initiated by acylium perchlorate groups on a carbon whisker. In the polymerization, the corresponding vinyl polymers were grafted onto a carbon-whisker surface based on the propagation of polymer from the surface: the percentage of grafting of polystyrene and polyindene reached 42.5 and 100.3%, respectively. The percentage of polystyrene grafting decreased with increasing polymerization temperature because of preferential chain transfer reactions at higher temperatures. Polymer-grafted carbon whisker gave a stable colloidal dispersion in a good solvent for grafted polymer.     

Stretching a polymer brush by making in situ cyclodextrin inclusion complexes

The interaction between poly(ethylene oxide) (PEO) chains grafted onto polystyrene latex particles and alpha-, beta-, and gamma-cyclodextrins (CD) was studied by small-angle neutron scattering. The particles were contrast-matched to the solvent in order that only the scattering from the polymer layers was detected. The signal from the layers was fitted to a double-exponential volume fraction profile. The effects of adding cyclodextrin on the polymer profile are shown as a function of cyclodextrin concentration. The polymer layers are seen to extend on addition of CD, which is consistent with a complexation between the grafted PEO and the CD molecules. The effect is the strongest with alpha-CD.     

Polymer Chain Conformation on Deuterated Polystyrene Nanoparticles Investigated by SANS

We previously reported that grafted polystyrene (PS) chains on silica nanoparticles at a low grafting density show similar conformations to free PS chains in the same solvent, THF (diameter ?50 nm, Colloid.poly.Sci. (2013), 291, 9, 2087–2099). As an extension of our previous study we choose an organic nanoparticle (deuterated polystyrene, dPS) instead of inorganic nanoparticle to see the impact of the substrate material on chain conformation. Additionally, a wider range of molecular weights were prepared to investigate the conformation feature of grafted PS chains more in detail. Small angle neutron scattering (SANS) experiments were performed to characterize PS grafted dPS particles in good solvent condition, with deuterated toluene and deuterated THF as solvent. To get insight into the conformation of the grafted PS layer we apply a scaling law describing the dimension of free PS polymer in good solvent condition to the obtained thickness of the grafted PS layer. We find an overall agreement with the scaling law where the thickness of the grafted PS layer is slightly larger than 2R_g of the free polymer chains in the respective solvent giving hint for semi dilute polymer brush (SDPB) situation.     

Effect of bidispersity in grafted chain length on grafted chain conformations and potential of mean force between polymer grafted nanoparticles in a homopolymer matrix

In efforts to produce polymeric materials with tailored physical properties, significant interest has grown around the ability to control the spatial organization of nanoparticles in polymer nanocomposites. One way to achieve controlled particle arrangement is by grafting the nanoparticle surface with polymers that are compatible with the matrix, thus manipulating the interfacial interactions between the nanoparticles and the polymer matrix. Previous work has shown that the molecular weight of the grafted polymer, both at high grafting density and low grafting density, plays a key role in dictating the effective inter-particle interactions in a polymer matrix. At high grafting density nanoparticles disperse (aggregate) if the graft molecular weight is higher (lower) than the matrix molecular weight. At low grafting density the longer grafts can better shield the nanoparticle surface from direct particle-particle contacts than the shorter grafts and lead to the dispersion of the grafted particles in the matrix. Despite the importance of graft molecular weight, and evidence of non-trivial effects of polydispersity of chains grafted on flat surfaces, most theoretical work on polymer grafted nanoparticles has only focused on monodisperse grafted chains. In this paper, we focus on how bidispersity in grafted chain lengths affects the grafted chain conformations and inter-particle interactions in an implicit solvent and in a dense homopolymer polymer matrix. We first present the effects of bidispersity on grafted chain conformations in a single polymer grafted particle using purely Monte Carlo (MC) simulations. This is followed by calculations of the potential of mean force (PMF) between two grafted particles in a polymer matrix using a self-consistent Polymer Reference Interaction Site Model theory-Monte Carlo simulation approach. Monte Carlo simulations of a single polymer grafted particle in an implicit solvent show that in the bidisperse polymer grafted particles with an equal number of short and long grafts at low to medium grafting density, the short grafts are in a more coiled up conformation (lower radius of gyration) than their monodisperse counterparts to provide a larger free volume to the longer grafts so they can gain conformational entropy. The longer grafts do not show much difference in conformation from their monodisperse counterparts at low grafting density, but at medium grafting density the longer grafts exhibit less stretched conformations (lower radius of gyration) as compared to their monodisperse counterparts. In the presence of an explicit homopolymer matrix, the longer grafts are more compressed by the matrix homopolymer chains than the short grafts. We observe that the potential of mean force between bidisperse grafted particles has features of the PMF of monodisperse grafted particles with short grafts and monodisperse grafted particles with long grafts. The value of the PMF at contact is governed by the short grafts and values at large inter-particle distances are governed by the longer grafts. Further comparison of the PMF for bidisperse and monodisperse polymer grafted particles in a homopolymer matrix at varying parameters shows that the effects of matrix chain length, matrix packing fraction, grafting density, and particle curvature on the PMF between bidisperse polymer grafted particles are similar to those seen between monodisperse polymer grafted particles.     

Blends of bisphenol-A polycarbonate and acrylic polymers: II. PC/acrylic copolymers as a new route for compatibilization

An acrylic polymer containing acid and anhydride units, referred to as reactive polyglutarimide (RPGI), has been used to react with PC. The reaction has been previously determined as an acidolysis of the carbonate bond which breaks the PC chain in two parts. One of those two parts remains free while the other one is grafted on the acrylic backbone. We have found that the anhydride units could also react with the carbonate bonds. In this case the PC macromolecule would also be broken in two parts, which would, however, both be grafted on the acrylic backbone. The reaction has been performed in solution in order to keep good contact between the reacting units. The influence of temperature and concentration on the grafting ratio has been studied. The best experimental conditions were determined in order to obtain a grafted copolymer where the acrylic backbone only supports, on the average, one PC side chain through acid reaction or two PC chains through anhydride reaction. Indeed, these two types of reactions could not be isolated. The efficiency of this copolymer as emulsifier has been studied in solution cast blends as well as in melt mixed blends. The copolymer strongly affects the microstructure in solution cast blends where films containing 30 wt % of PC have become transparent. However, the dispersed phase size of solvent cast blends could be highly influenced by the casting conditions related to solvent trapping. In melt mixed samples, the copolymer also reduces significantly the dispersed phase size, but no transparent blends have been observed so far. These results were compared with those given in the literature describing the efficiency of a synthesized copolymer which has a more complicated structure. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 735–747, 1997     

Preparation of poly(styrene‐co‐acrylonitrile)‐grafted multiwalled carbon nanotubes via surface‐initiated atom transfer radical polymerization

The in situ grafting‐from approach via atom transfer radical polymerization was successfully applied to polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile grafted onto the convex surfaces of multiwalled carbon nanotubes (MWCNTs) with (2‐hydroxyethyl 2‐bromoisobutyrate) as an initiator. Thermogravimetric analysis showed that effective functionalization was achieved with the grafting approach. The grafted polymers on the MWCNT surface were characterized and confirmed with Fourier transform infrared spectroscopy and nuclear magnetic resonance. Raman and near‐infrared spectroscopy revealed that the grafting of polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile slightly affected the side‐wall structures. Field emission scanning electron microscopy showed that the carbon nanotube surface became rough because of the grafting of the polymers. Differential scanning calorimetry results indicated that the polymers grafted onto MWCNTs showed higher glass‐transition temperatures. The polymer‐grafted MWCNTs exhibited relatively good dispersibility in an organic solvent such as tetrahydrofuran. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 460–470, 2007     

Distinguishing between dynamic yielding and wall slip in a weakly flocculated colloidal dispersion

Silica spheres coated with grafted poly(butyl methacrylate) chains and dispersed in a poor solvent at low to moderate volume fractions display high elastic and loss moduli, together with viscosities that diverge at a dynamic yield stress and decrease by several orders of magnitude with increasing stress. The elastic modulus and dynamic yield stress increase rapidly with volume fraction, but remain in constant ratio. Longer grafted chains produce stronger interparticle attractions, resulting in a smaller yield strain and larger elastic modulus. An apparent Newtonian plateau at extremely low shear rates in creep experiments is argued to result from slip at the wall. Thus, attractions between these grafted layers in a poor solvent generate a pseudo plastic solid, a metastable state that persists indefinitely and demonstrates little affinity for the walls of the rheometer, hence the slip. In contrast, depletion flocculated dispersions with higher volume fractions but weaker attractions produce very similar rheology but with a true Newtonian viscosity and adhesion to the wall.     

Immobilization of protein to surface-grafted PEO/PPO block copolymers

Adsorption and covalent immobilization of Ig G to a grafted tetrabranched PEO/PPO block copolymer have been studied and related to the temperature-dependent properties of the grafted polymer. The investigation was performed by means of in situ ellipsometry, as well as by ESCA and ELISA measurements. The results show that the copolymer grafted to polystyrene (PS) surface contracts substantially upon increasing the temperature. A close interrelation was found between the properties of the grafted layer and the amount of protein (Ig G) that could be either adsorbed or covalently immobilized to the modified PS surface. By utilizing the reversed temperature phase behavior exhibited by these copolymers a relatively high loading of protein was obtained at temperatures close to the cloud point. By lowering the temperature after immobilization, the grafted layer regains its hydrophilicity and protein-rejecting properties. Thus, problems associated with interaction between bound protein and the underlying solid surface are minimized.     

New approach to characterise physicochemical properties of solid substrates by inverse gas chromatography at infinite dilution. III. Determination of the acid-base properties of some solid substrates (polymers,oxides and carbon fibres): a new model

HPLC experiments to separate butyl-terminated polystyrene (B-PS) oligomers have been mimicked by equilibrium self-consistent-field calculations based upon the Scheutjens Fleer formalism for polymers at interfaces. The adsorption-desorption transition as a function of the fraction of good solvent in a non-solvent (water)-solvent (tetrahydrofuran) mixture has been analysed and correlated to corresponding experiments. Much attention is paid to keeping the modelling as realistic as possible; for example, the effects of the solvent mixture on the C18-alkyl tails that are grafted on the silica surface are retained in the calculations. It is shown that the butyl end groups affect the elution properties up to chains with approximately 30 styrene units. Excellent semi-quantitative comparison is found with experiments for a realistic set of interaction parameters. Molecular-level information is available for the adsorption layer as a function of the solvent quality. Going from poor to good solvent, it is typical to find that the B-PS is fully absorbed inside the alkyl brush, then adsorbed on top of it, and finally depleted from it. The depletion effect in good solvents increases with increasing molecular mass.     

Surface characterizations of poly(ethylene terephthalate) film modified by a carbohydrate-bearing photoreactive azide group

Grafting of a carbohydrate UV-reactive molecule, the β-d-galactopyranosyl-(1-4)-1-N-[2-(4-azidophenyl amino)-ethylamino]-1-deoxy-d-glucitol (AzPhLac), has been achieved on poly(ethylene terephthalate) film. The dependence of surface density and yield of grafted AzPhLac have been studied versus the number of moles of UV-treated AzPhLac via the deposit of a drop of solution with a known volume and concentration. A nearly complete grafting of initial AzPhLac molecules was reached for the lowest concentration and lowest volume of solution deposit conditions. Grafting density values in the range of 29-181 nmol/cm² confirm the polymeric nature of the grafted layer. FTIR-ATR demonstrated the heterogeneity in thickness of the grafted surface due to the drop-deposit method and solvent evaporation process. AFM (imaging) allowed us to find a correlation between grafting density and rms roughness. Water-contact angle and AFM (contact mode) gave further evidence of the hydrophilic nature of the extreme surface.     

Radiation grafting of styrene onto poly(vinylidene fluoride) films in propanol: The influence of solvent and synthesis conditions

Electron‐beam‐irradiated poly(vinylidene fluoride) films were grafted with styrene with propanol or toluene as a solvent. The influence of the synthesis conditions and, more particularly, of the solvent was investigated. In propanol, the order of dependence of the grafting rate is 0.43 on the pre‐irradiation dose and 1.2 on the monomer concentration. The activation energy of the grafting reaction in propanol is approximately 73 kJ/mol. Both the initial grafting rate and the saturation degree of grafting are considerably higher in propanol, which is unable to swell polystyrene grafts, than in toluene, which diffuses with styrene through the grafted moiety. The grafting solvent also influences the structure of the membrane: films grafted in propanol have a much reduced elongation at break and a rougher surface. It is suggested that phase‐separated polystyrene domains may be larger when grafting is carried out in a styrene–propanol solution. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1512–1519, 2000     

Characteristics of acrylic acid-grafted polyethylene prepared by photografting using mixed solvents consisting of water and organic solvent

Photografting of acrylic acid (AA) on linear-low density polyethylene film (thickness=30 μm) was investigated at 60 °C using mixed solvent consisting of water and organic solvents such as acetone and methanol. Xanthone was used as photoinitiator, which was coated on the film earlier. With longer photoirradiation time, such as 40 and 60 min, the percentage of grafting decreased with increasing the concentration of organic solvent in the mixed solvent, where formation of homopolymer occurred preferentially over the grafting reaction. In the system with photoirradiation of 20 min, on the other hand, a maximum percentage of grafting was observed at a certain concentration of organic solvent, in which formation of grafted polymer rather than homopolymer was emphasized. Photografting using the mixed solvent resulted in AA-grafted film with homogeneous distribution of grafted chains, exhibiting larger pH-responsive character, where the grafted film shrinks in an acidic medium, while it swells in an alkaline region. Polymer catalysts for hydrolysis of p-nitrophenylacetate, which was performed at 40 °C in water/ethanol (1/4, v/v)-mixed solvent at pH=9.0, could be prepared by reacting the AA-grafted film with L-histidine and its catalytic activity was slightly influenced by location of grafted chains.     

Swelling of a polymer brush by a poor solvent

The addition of a small amount of a poor solvent impurity (methanol) to a theta solvent (cyclohexane) is found to cause appreciable swelling (≈30% increase of the average brush height) in a model end‐grafted polystyrene (PS) brush layer. This unusual type of swelling is not observed if octadecyltrichlorosilane (OTS) is first grafted to the portion of the silicon substrate uncovered by the grafting end‐groups of the PS chains. Brush swelling in the absence of OTS surface protection is interpreted as arising from a segregation of methanol to the solid substrate and the resulting modification of the polymer–surface interaction. We also observe that the addition of a small amount of methanol to an adsorbed PS layer exposed to cyclohexane causes rapid film delamination from the silicon substrate. Together these observations imply a strong influence of surface active impurities on the structure and adhesive stability of polymer layers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4126–4131, 2004