Modular Stereoselective Synthesis of (1→2)‐C‐Glycosides based on the sp2–sp3 Suzuki–Miyaura Reaction

This work reports a modular and rapid approach to the stereoselective synthesis of a variety of α‐ and β‐(1→2)‐linked C‐disaccharides. The key step is a Ni‐catalyzed cross‐coupling reaction of D ‐glucal pinacol boronate with alkyl halide glycoside easily prepared from commercially available D ‐glucal. The products of this sp²–sp³ cross‐coupling reaction can be converted to glucopyranosyl, mannopyranosyl, or 2‐deoxy‐glucopyranosyl C‐mannopyranosides by one‐ or two‐step stereoselective oxidative–reductive transformations. To the best of our knowledge, we demonstrated the first synthetic application of a challenging sp²–sp³ Suzuki‐Miyaura cross‐coupling reaction in carbohydrate chemistry.     

Spectroscopic studies on olefins—III: NMR of cis- and trans- disubstituted olefins

The proton NMR spectra of four cis/trans pairs of 1,2-disubstituted olefins have been analysed. The observed trends of the olefinic, vicinal and allylic proton-proton coupling constants are discussed in terms of rehybridization at the sp² carbon atoms. It is found that in these substances the trans-allylic couplings are generally more negative than the cis-allylic couplings contrary to Barfield's¹ theoretical prediction but in agreement with some earlier experimental data. Steric hindrance between cisoid substituents is cited as the probable origin of this end related trends.     

High resolution proton coupled 13C spectrum and structure of butadieneiron tricarbonyl

A complete analysis of the proton coupled ¹³C spectrum of butadieneiron tricarbonyl is presented. The structure of the diene ligand is discussed on the basis of vicinal C,H and H,H coupling constants as well as ²J(HH), ¹J(CH) and ¹J(CC) data. These data are interpreted in terms of a non-planar C,H skeleton in which C,C bond lengths are nearly equal and the terminal carbon atoms exhibit some rehybridization towards sp³. The results obtained from the complex in solution agree with a structural model from X-ray data of substituted butadieneiron tricarbonyl complexes.     

Decarboxylative C(sp3)−O Cross‐Coupling

Alkyl aryl ethers are an important class of compounds in medicinal and agricultural chemistry. Catalytic C(sp³)?O cross‐coupling of alkyl electrophiles with phenols is an unexplored disconnection strategy to the synthesis of alkyl aryl ethers, with the potential to overcome some of the major limitations of existing methods such as C(sp²)?O cross‐coupling and S_N2 reactions. Reported here is a tandem photoredox and copper catalysis to achieve decarboxylative C(sp³)?O coupling of alkyl N‐hydroxyphthalimide (NHPI) esters with phenols under mild reaction conditions. This method was used to synthesize a diverse set of alkyl aryl ethers using readily available alkyl carboxylic acids, including many natural products and drug molecules. Complementarity in scope and functional‐group tolerance to existing methods was demonstrated.     

Conformational studies on 2-fluoro-1,2-disubstituted ethanes by NMR spectroscopy. Influence of electronegativity on vicinal proton–proton and fluorine–proton coupling constants

The analysis of the ABKX spectra of thirteen compounds of the series RC(H-K)(F-X)C(H-A)(H-B)X gave the four vicinal proton-proton and fluorine-proton coupling constants. These coupling constants of conformationally mobile structures were used (i) to calculate the populations of the rotational states of the ? CHF? CH₂? bond, (ii) to calculate the vicinal trans proton-proton J(HH)^t and gauche and trans fluorine-proton coupling constants J(FH)^g and J(FH)^t and (iii) to give the unambiguous assignment of protons H-A and H-B. The dependence of the gauche and trans coupling constants with substituent electronegativity is explored. The results extend known correlations towards smaller electronegativity values. More quantitatively, the results and those in the literature, excluding those where deformations of torsional or bond angles occur, give a good fit of the data: a linear fit for J(HH)^t = 15.0-0.77 Σ(ΔE), an exponential fit for J(FH)^g = 15.35 exp [-0.266 Σ (ΔE)] and a linear fit for J(FH)^t = 65.75 - 7.52 Σ (ΔE), where Σ (ΔE) is the sum of the electronegativity difference between hydrogen and the six atoms or groups on the CH? CF fragment.     

Rhodium(I)‐Catalyzed Sequential C(sp)C(sp3) and C(sp3)C(sp3) Bond Formation through Migratory Carbene Insertion

A Rh^I‐catalyzed three‐component reaction of tert‐propargyl alcohol, diazoester, and alkyl halide has been developed. This reaction can be considered as a carbene‐involving sequential alkyl and alkynyl coupling, in which C(sp)? C(sp³) and C(sp³)? C(sp³) bonds are built successively on the carbenic carbon atom. The Rh^I‐carbene migratory insertion of an alkynyl moiety and subsequent alkylation are proposed to account for the two separate C? C bond formations. This reaction provides an efficient and tunable method for the construction of all‐carbon quaternary center.     

Enantioselective Construction of α‐Chiral Silanes by Nickel‐Catalyzed C(sp3)−C(sp3) Cross‐Coupling

An enantioselective C(sp³)?C(sp³) cross‐coupling of racemic α‐silylated alkyl iodides and alkylzinc reagents is reported. The reaction is catalyzed by NiCl₂/(S,S)‐Bn‐Pybox and yields α‐chiral silanes with high enantiocontrol. The catalyst system does not promote the cross‐coupling of the corresponding carbon analogue, corroborating the stabilizing effect of the silyl group on the alkyl radical intermediate (α‐silicon effect). Both coupling partners can be, but do not need to be, functionalized, and hence, even α‐chiral silanes with no functional group in direct proximity of the asymmetrically substituted carbon atom become accessible. This distinguishes the new method from established approaches for the synthesis of α‐chiral silanes.     

Copper‐Catalyzed Enantioconvergent Cross‐Coupling of Racemic Alkyl Bromides with Azole C(sp2)−H Bonds

The development of enantioconvergent cross‐coupling of racemic alkyl halides directly with heteroarene C(sp²)?H bonds has been impeded by the use of a base at elevated temperature that leads to racemization. We herein report a copper(I)/cinchona‐alkaloid‐derived N,N,P‐ligand catalytic system that enables oxidative addition with racemic alkyl bromides under mild conditions. Thus, coupling with azole C(sp²)?H bonds has been achieved in high enantioselectivity, affording a number of potentially useful α‐chiral alkylated azoles, such as 1,3,4‐oxadiazoles, oxazoles, and benzo[d]oxazoles as well as 1,3,4‐triazoles, for drug discovery. Mechanistic experiments indicated facile deprotonation of an azole C(sp²)?H bond and the involvement of alkyl radical species under the reaction conditions.     

13C NMR study of some polychloro-isobutane and -isobutene compounds

The ¹³C chemical shifts and the carbon–proton coupling constants have been determined for some chlorinated isobutane and isobutene compounds. The one-bond coupling constants in isobutane derivatives showed a regular increase with an increasing number of γ-chlorine substituents. The three-bond coupling constant of the methyl carbon decreased from 4.2 to 2.0 Hz as the number of chlorine substituents in the γ-position increased. In the isobutene compounds, the vicinal coupling of C-1 was larger to protons in a group that is trans with respect to a chlorine substituent on C-1 than to those in the corresponding group cis to the chlorine. The vicinal coupling constants between atoms in geminal groups (on C-2) seem to be affected by the orientation of the chlorine substituent on C-1.     

Redox‐Neutral Coupling between Two C(sp3)−H Bonds Enabled by 1,4‐Palladium Shift for the Synthesis of Fused Heterocycles

The intramolecular coupling of two C(sp³)?H bonds to forge a C(sp³)?C(sp³) bond is enabled by 1,4‐Pd shift from a trisubstituted aryl bromide. Contrary to most C(sp³)?C(sp³) cross‐dehydrogenative couplings, this reaction operates under redox‐neutral conditions, with the C?Br bond acting as an internal oxidant. Furthermore, it allows the coupling between two moderately acidic primary or secondary C?H bonds, which are adjacent to an oxygen or nitrogen atom on one side, and benzylic or adjacent to a carbonyl group on the other side. A variety of valuable fused heterocycles were obtained from easily accessible ortho‐bromophenol and aniline precursors. The second C?H bond cleavage was successfully replaced with carbonyl insertion to generate other types of C(sp³)‐C(sp³) bonds.     

Direct C(sp2)C(sp3) Cross‐Coupling of Diaryl Zinc Reagents with Benzylic,Primary, Secondary,and Tertiary Alkyl Halides

The direct C(sp²)? C(sp³) cross‐coupling of diaryl zinc reagents with benzylic, primary, secondary, and tertiary alkyl halides proceeded in the absence of coordinating ethereal solvents at ambient temperature without the addition of a catalyst. The C(sp²)? C(sp³) cross‐coupling showed excellent functional‐group tolerance, and products were isolated in high yields, generally without the requirement for purification by chromatography. This process represents an expedient, operationally simple method for the construction of new C(sp²)? C(sp³) bonds.     

Conformational analysis: XIV—A 1H n.m.r. conformational study of methyl substituted 2-oxo-1,3,2-dioxathians to confirm the predominance of chair forms in the trimethylene sulphite series

Seven isomeric 4,5,6-trimethyl-2-oxo-1,3,2-dioxathians, cis-4-trans-6-dimethyl-r-2-oxo-1,3,2-dioxathian and two isomeric 4,5,5,6-tetramethyl-2-oxo-1,3,2-dioxathians were prepared and their ¹H n.m.r. spectra analysed. The values of the vicinal coupling constants reported earlier for the cis-4-trans-6 compound were shown to be erroneous. In all cases the values of the vicinal coupling constants (and those of the chemical shifts) are indicative of a single chair conformation or a chair-chair equilibrium, in contrast to earlier reports on the significant contribution of twist forms but in agreement with an electron diffraction study. The chair form is ? 31 kJ mol^?1 thermochemically more stable than the twist form.     

Quaternarisation de diméthyl-5,6 pyrazolidino[4,3-d )isoxazolines-2

We have determined the quaternization site of bicyclic molecules such as dimethyl-5,6 pyrazolidino[4,3-d]isoxazolines-2 containing two vicinal sp³ nitrogen atoms in a cycle and one sp² nitrogen atome in the other by spectral methods and by degradation of their corresponding iodomethylates. The quaternization takes place on one of the two sp³ nitrogen atoms and is controlled by steric effects.     

Direct oxidative C(sp3)─H/C(sp2)─H coupling reaction using recyclable Sr-doped LaCoO3 perovskite catalyst

A strontium-doped lanthanum cobaltite perovskite, La_0.6Sr_0.4CoO₃, was prepared and utilized as a recyclable heterogeneous catalyst for the direct oxidative C(sp³)─H/C(sp²)─H coupling reaction between cyclic ethers and alkenes or coumarins to achieve corresponding α-functionalized ethers. The α-functionalization of cyclic thioethers or amides with alkenes or coumarins was also achieved via this protocol. The La_0.6Sr_0.4CoO₃ catalyst exhibited better performance than a variety of homogeneous and heterogeneous catalysts. Utilizing a recyclable catalyst would offer a greener option for the direct oxidative C(sp³)─H/C(sp²)─H coupling reaction. To our best knowledge, the C(sp³)─H/C(sp²)─H coupling between olefins and ethers to generate α-functionalized ethers using a heterogeneous catalyst has not been previously reported, and the α-functionalization of cyclic thioethers or amides with alkenes or coumarins is new.     

Structural trends of 29Si–1H spin–spin coupling constants across double bond

The calculations of geminal and vicinal ²⁹Si–¹H spin–spin coupling constants across double bond in 15 alkenylmethylsilanes and alkenylchlorosilanes were carried out at the second‐order polarization propagator approach level in a good agreement with experiment. Two structural trends, namely, (i) the geometry of the coupling pathway and (ii) the effect of the electrowithdrawing substituent, have been interpreted in terms of the natural J‐coupling analysis within the framework of the natural bond orbital approach. Thus, the marked difference between cisoidal and transoidal ²⁹Si–¹H spin–spin coupling constants across double bond was accounted for the delocalization contributions including bonding and antibonding Si–C and C–H orbitals, whereas the chlorine effect was explained in terms of the steric contributions including bonding Si–Cl orbitals. Copyright © 2012 John Wiley & Sons, Ltd.     

Stereochemical behavior of 77Se‐1H spin‐spin coupling constants in pyrazolyl‐1,3‐diselenanes and 1,2‐diselenolane

Conformational study of five derivatives of 2‐(pyrazol‐4‐yl)‐1,3‐diselenane together with related 1,2‐diselenolane in respect to the stereochemical trends of geminal and vicinal ⁷⁷Se‐¹H spin‐spin coupling constants has been carried out by means of high‐level theoretical calculations in combination with experiment. The marked dihedral angle dependences for both types of couplings accounted for the lone pair effect in the case of geminal coupling constants and the Karplus‐type relationship for vicinal couplings have been established, which is of major importance for the stereochemical analysis of saturated selenium containing heterocycles. Copyright © 2012 John Wiley & Sons, Ltd.     

Construction of C(sp2)−C(sp3) Bond between Quinoxalin‐2(1H)‐ones and N‐Hydroxyphthalimide Esters via Photocatalytic Decarboxylative Coupling

A novel visible‐light‐driven decarboxylative coupling of alkyl N‐hydroxyphthalimide esters (NHP esters) with quinoxalin‐2(1H)‐ones has been developed. This C(sp²)?C(sp³) bond‐forming transformation exhibits excellent substrate generality with respect to both the coupling partners. Of note, a series of 3‐primary alkyl‐substituted quinoxalin‐2(1H)‐ones that were difficult to synthesize by previous methods could be obtained in moderate to excellent yields. Additionally, the mild conditions, easy availability of substrates, wide functional group tolerance and operational simplicity make this protocol practical in the synthesis of 3‐alkylated quinoxalin‐2(1H)‐ones.     

Stereochemical behavior of 2 J(Se,H) and 3 J(Se,H) spin‐spin coupling constants across sp3 carbons: a theoretical scrutiny

A theoretical study of geminal and vicinal ⁷⁷Se‐¹ H coupling constants in the benchmark dimethyl and diethyl selenides has been performed at the SOPPA level followed by the NJC analysis within the NBO approach to reveal their stereochemical behavior in respect with the three main structural factors, namely, (i) the dihedral angle dependences, (ii) the bond angle dependences and (iii) the lone pair effects. It has been demonstrated that both geminal and vicinal couplings provide a unique stereospecificity in respect with the orientational lone pair effect together with the geometry of a coupling pathway, which is of prime importance for the stereochemical studies of organoselenium compounds. Copyright © 2012 John Wiley & Sons, Ltd.     

Precise values of the 13C component vicinal coupling constants for calculating side-chain conformations in amino acids

From consideration of ¹H–¹H vicinal coupling constants and ¹³C? ¹H long-range coupling constants in a series of amino acid derivatives, the precise values of ¹³C component vicinal coupling constants have been calculated for the three minimum energy staggered rotamers for the C(α)H? C(β)H₂ side-chains of amino acids.     

Total Synthesis of the Anti‐inflammatory and Pro‐resolving Lipid Mediator MaR1n−3 DPA Utilizing an sp3–sp3 Negishi Cross‐Coupling Reaction

The first total synthesis of the lipid mediator MaR1_{n?3 DPA} ( 5 ) has been achieved in 12 % overall yield over 11 steps. The stereoselective preparation of 5 was based on a Pd‐catalyzed sp³–sp³ Negishi cross‐coupling reaction and a stereocontrolled Evans–Nagao acetate aldol reaction. LC‐MS/MS results with synthetic material matched the biologically produced 5 . This novel lipid mediator displayed potent pro‐resolving properties stimulating macrophage efferocytosis of apoptotic neutrophils.