Synthesis and thermal properties of azo-peroxyesters

Abstract  

New azo-perester derivatives of tert-butyl and tert-amyl hydroperoxides were obtained in reactions of azo acid chlorides with hydroperoxides in the presence of an inorganic base. Obtained azo-peresters possess two kinds of the labile functional groups: the azo group and also the perester group. The data from DSC experiments indicate that in the case of azo-perester derivatives of tert-amyl hydroperoxide, the perester group decomposes at a somewhat lower temperature than in the case of tert-butyl derivatives, whereas azo groups decompose at somewhat higher temperature in the case of derivatives with tert-amyl substituent.     

Synthesis and thermal properties of azo-peroxyesters

Abstract  New azo-perester derivatives of tert-butyl and tert-amyl hydroperoxides were obtained in reactions of azo acid chlorides with hydroperoxides in the presence of an inorganic base. Obtained azo-peresters possess two kinds of the labile functional groups: the azo group and also the perester group. The data from DSC experiments indicate that in the case of azo-perester derivatives of tert-amyl hydroperoxide, the perester group decomposes at a somewhat lower temperature than in the case of tert-butyl derivatives, whereas azo groups decompose at somewhat higher temperature in the case of derivatives with tert-amyl substituent. Graphical abstract        

Synthesis of 2,2′-diamino-7-tert-butyl-9,9′-spirobifluorene starting from 4,4′-di-tert-butylbiphenyl

Abstract  

A novel spirobifluorene diamine monomer, 2,2′-diamino-7-tert-butyl-9,9′-spirobifluorene, was obtained starting from the readily available reagent 4,4′-di-tert-butylbiphenyl. The key step of the synthesis is the introduction of a nitro group into the 2-position of the spirobifluorene through the loss of tert-butyl at the 2-position.     

Identification and molecular characterization of a novel flavin-free NADPH preferred azoreductase encoded by <Emphasis Type="Italic">azoB</Emphasis> in <Emphasis Type="Italic">Pigmentiphaga kullae</Emphasis> K24

Background  

Microbial degradation of azo dyes is commonly initiated by the reduction of the azo bond(s) by a group of NADH or NADPH dependant azoreductases with many requiring flavin as a cofactor. In this study, we report the identification of a novel flavin-free NADPH preferred azoreductase encoded by azoB in Pigmentiphaga kullae K24.     

New azo-peroxidic initiators in the radical polymerization of styrene and methyl methacrylate

Two new azo-perester compounds, di-tert-butyl-6,6′-azobis-(6-cyanoperoxyheptanoate) (6,6-di-tBu) and di-tert-amyl-6,6′-azobis-(6-cyanoperoxyheptanoate) (6,6-di-tAm), synthesized on the basis of 6,6′-azobis-(6-cyanoheptanoic acid) (ACHpA), were investigated for their use in the radical polymerization of styrene (S) and methyl methacrylate (MMA). Their characteristics are given, including chemical (IR spectra), thermal (DSC) and kinetic, i.e., thermal decomposition studied by volumetric and gas chromatographic methods. The rate constants and activation energies of the decomposition of both the azo and perester bonds were determined. The new azo-peresters were utilized to initiate the radical solution polymerizations of S and MMA at 60 °C. The kinetic parameters of the processes, i.e., polymerization rate and overall rate constant, were determined. Subsequently, the polymerization products were characterized by IR and DSC. It was found that the perester groups were present in the obtained polymers, and hence, the polymers are “active” for further polymerization.     

Synthesis and polymerization of p-(p′-vinylbenzoyl)-peroxybenzoic acid tert-butylester: A monomer containing a photodissociable radical source

In a previous report we have shown that efficiently photodecomposable, but thermally stable, peresters can be made from a compound that contains both a triplet photosensitizer functionality and a perester group. This fundamental approach has been extended to make a novel vinyl monomer containing a triplet sensitizer and a perester group. Thus, the monomer p-vinylbenzoyl-p-tert-butyl perbenzoate (VBPE) has been synthesized and polymerized by normal procedures without loss of perester activity. The resulting polymer perester can be used as an efficient photolabile radical source by irradiating at the λ_max of the benzophenone carbonyl moiety. The homopolymer (PVBPE) and copolymers with other monomers, such as styrene, could be photocrosslinked with high efficiency. Copolymers of VBPE and styrene containing low percentages of VBPE have been used to initiate graft chains of poly(methyl methacrylate) by irradiating a solution of the copolymer in methyl methacrylate at 366 nm.     

Stereoselective reaction between alkyl propiolates and phenols in the presence of sodium azide in tert-butyl alcohol

Abstract  

Stereoselective reaction of various substituted phenols with alkyl propiolates in the presence of a catalytic amount of sodium azide in tert-butyl alcohol at reflux temperature leads to alkyl (Z)-3-phenoxy-2-propenoates in good yields.     

Extraction and DFT study on the complexation of H3O+ ion with tetrakis(2-ethoxyethoxy)-tetra-p-tert-butylcalix[4]arene

Abstract  

Extraction experiments in the two-phase water/nitrobenzene system and γ-activity measurements were used to determine the stability constant of protonated tetrakis(2-ethoxyethoxy)-tetra-p-tert-butylcalix[4]arene in nitrobenzene saturated with water. Density functional theory (DFT) calculations were applied to derive the most probable structure of the tetrakis(2-ethoxyethoxy)-tetra-p-tert-butylcalix[4]arene·H₃O⁺ complex species.     

Thermal decomposition of the tert-butyl perester of thymidine-5′-carboxylic acid. Formation and fate of the pseudo-C4′ radical

Thermal decomposition of the tert-butyl perester of thymidine-5′-carboxylic acid 1 carried out at 85 °C in different solvents affords the tert-butylacetal 4a, deriving from in cage decomposition, and pseudo C4′ radicals 2. Radicals 2 can be reduced to 5 by hydrogen atom abstraction from thiol (thiophenol or glutathione) or THF, or can be oxidized to cations 8 by dioxygen or perester 1 itself. Cations 8 are stereoselectively trapped by the nucleophilic solvent (tert-butanol, methanol, water) to give acetals 4a-c.     

Regioselective vinylation of kojic acid using acetylenic esters in the presence of triphenylphosphine or tert-butyl isocyanide

Abstract  

The 1:1 reactive intermediates generated by addition of tert-butyl isocyanide or triphenylphosphine to acetylenic esters were trapped by kojic acid to yield O-vinylated and C-vinylated kojic acid, respectively.     

Oxidative Addition of <Emphasis Type="Italic">N</Emphasis>-Aminophthalimide to Conjugated and Nonconjugated Alkylazoalkanes

A series of γ,δ-unsaturated azo compounds was prepared by thermal isomerization of allylalkylhydrazones obtained from the simplest carbonyl compounds. The oxidation of N-aminophthalimide with lead tetraacetate in the presence of these unsaturated compounds gave rise to mixtures of adducts at the azo group, regioisomers of phthalimidoazimines. The oxidative addition of N-aminophthalimide to 1-isopropylazocycloalkenes afforded bicyclic C-isopropylazo-N-phthalimidoaziridines, but the same reaction with 2-alkylazopropenes did not result in any adducts with these conjugated azocompounds.__________Translated from Zhurnal Organicheskoi Khimii, Vol. 41, No. 2, 2005, pp. 214–223.Original Russian Text Copyright © 2005 by Kuznetsov, Belov, Buchaka.     

Studies on the vinyl polymerization photoinitiated by p-benzoylperoxybenzoic acid tert-butylester

p-Benzoylperoxybenzoic acid tert-butylester (BPE) undergoes an efficient photodecomposition producing cleavage of the peroxy bond. The excited triplet benzophenone carbonyl group of the perester is quenched by vinyl monomers (the degree of which depends on the type of monomer used) thus reducing the rate of decomposition of BPE when it is used as a photoinitiator. Radicals generated from the decomposition of BPE are highly efficient in initiating vinyl polymerization. The benzophenone-containing end groups of the polymer chain can be estimated and the carbonyl function is useful for polymer modification.     

Thermochemical Studies for Determination of the Standard Molar Enthalpies of Formation of Alkyl-Substituted Furans and Some Ethers

The standard molar enthalpies of vaporization _l ^g H _m ^º of 2,5-dimethylfuran, 2-tert-butylfuran, 2,5-di-tert-butylfuran, cyclopentenyl methyl ether, cyclohexenyl methyl ether, and tert-amyl methyl ether were obtained from the temperature variation of the vapor pressure measured in a flow system. The standard (p° = 0.1 MPa) molar enthalpies of formation _f H _m ^º (1) at the temperature T = 298.15 K were measured using combustion calorimetry for 2,5-dimethylfuran, 2-tert-butylfuran, and 2,5-di-tert-butylfuran. From the derived standard molar enthalpies of formation for gaseous compounds, ring correction terms and non-nearest neighbor interactions useful in the application of the Benson group additivity scheme were calculated.     

Reaction of Tri- and Tetrasubstituted Alkenes with the Low-Temperature Oxidizing System Aluminum tert-Butylate-tert-Butyl Hydroperoxide

The system consisting of aluminum tert-butylate and tert-butyl hydroperoxide under mild conditions (20°C) oxidizes tri- and tetrasubstituted ethylenes containing at least one -methyl group. The reaction proceeds via formation of tertiary allylic hydroperoxides and their subsequent transformations into unsaturated alcohols and epoxy alcohols, and also into carbonyl compounds. The presence of the latter products suggests degradation of the carbon skeleton of alkenes.     

Synthesis, crystal structure and intermolecular magnetic interactions of a new N-TEMPO-3,5-di-tert-butylsalicylaldimine radical

A new N-TEMPO-3,5-di-tert-butylsalicylaldimine radical (1) has been synthesized and characterized by single crystal X-ray diffraction, elemental analysis, IR, UV–vis, and EPR spectroscopy and temperature dependent magnetic susceptibility. X-ray diffraction revealed that H-atoms of γ-CH in TEMPO and CH₃ in salicylaldimine moieties, are located in close contact with the neighboring N–O radical group in crystal 1. The temperature dependence of the magnetic susceptibility (χ_m) of 1 has been fitted by the Curie–Weiss law with θ = −0.3 K within 10–300 K, suggesting the presence of a weak intermolecular antiferromagnetic interaction between radical centers at T < 10 K. It has been demonstrated that radical 1 possesses crystal structure involving co-existence of antiferromagnetic and ferromagnetic interactions through C–H?O–N contacts of γ-CH and ^tBu groups hydrogen atoms, in which the former path dominates over the latter.     

DBU-catalyzed expeditious and facile multicomponent synthesis of N-arylquinolines under microwave irradiation

Abstract  

N-Arylquinoline derivatives are obtained in excellent yields by a rapid, easy, and efficient one-pot multicomponent reaction of aromatic aldehydes, 3-arylamino-5,5-dimethylcyclohex-2-enone, and active methylene compounds utilizing 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as a catalyst in ethanol under microwave irradiation.     

Triethylantimony(V) complexes with bidentate O,N-, O,O- and tridentate O,N,O′-coordinating o-iminoquinonato/o-quinonato ligands: Synthesis, structure and some properties

The novel triethylantimony(v) o-amidophenolato (AP-R)SbEt₃ (R = i-Pr, 1; R = Me, 2) and catecholato (3,6-DBCat)SbEt₃ (3) complexes have been synthesized and characterized by IR, NMR spectroscopy (AP-R is 4,6-di-tert-butyl-N-(2,6-dialkylphenyl)-o-amidophenolate, alkyl = isopropyl (1) or methyl (2); 3,6-DBCat is 3,6-di-tert-butyl-catecholate). Complexes 1–3 have been obtained by the oxidative addition of corresponding o-iminobenzoquinones or o-benzoquinones to Et₃Sb. The addition of 4,6-di-tert-butyl-N-(3,5-di-tert-butyl-2-hydroxyphenyl)-o-iminobenzoquinone to Et₃Sb at low temperature gives hexacoordinate [(AP-AP)H]SbEt₃ (4) which decomposes slowly in vacuum with the liberation of ethane yielding pentacoordinate complex [(AP-AP)]SbEt₂ (5). [(AP-AP)H]²⁻ is O,N,O′-tridentate amino-bis-(3,5-di-tert-butyl-phenolate-2-yl) dianion and [(AP-AP)]³⁻ is amido-bis-(3,5-di-tert-butyl-phenolate-2-yl) trianion. The decomposition of 4–5 accelerates in the presence of air. o-Amidophenolates 1 and 2 bind molecular oxygen to give spiroendoperoxides Et₃Sb[L-iPr]O₂ (6) or Et₃Sb[L-Me]O₂ (7) containing trioxastibolane rings. This reaction proceeds slowly and reaches the equilibrium at 15–20% conversion five times more than for (AP-R)SbPh₃ analogues. Molecular structures of 1 and 5 were determined by X-ray analysis.     

Synthesis and characterization of MnO2 colloids

This work addresses the issue of radiation chemical synthesis of MnO₂ nanoparticles and also illustrates the ease of formation of nanorods and sheets by adroit manipulation of experimental conditions. The radiation chemical yield (G-value) for reduction of Mn (VII) by the hydrated electron was found to be 0.27 μmol J⁻¹ and 0.17 μmol J⁻¹ respectively, when tert. butanol and isopropanol were used as scavengers in nitrogen-saturated solutions. The colloids formed upon irradiation of air-saturated solution and N₂-purged solution with tert. butanol as scavenger were found to be most stable. Irradiation of air-saturated solution containing 4×10⁻⁴ M KMnO₄ at a dose of 1692 Gy resulted in the formation of nanorods of the dimension 100–150 nm and nanospheres in the range 10–20 nm. Irradiation of N₂-purged solution containing tert. butanol as scavenger for OH-produced reticulated structure of nanorods with length varying from 50 to 100 nm at a dose of 1692 Gy. Elemental analysis was performed using scanning electron microscope on MnO₂ formed by reduction and oxidation and the purity was found to be 98% of elemental Mn content.     

Precipitation polymerization of <Emphasis Type="Italic">N-tert</Emphasis>-butylacrylamide in water producing monodisperse polymer particles

The precipitation polymerizations of N-tert-butylacrylamide (NtBAM) in water are demonstrated; for example, the polymerization with potassium peroxodisulfate using a 15 g L⁻¹ (118 mmol L⁻¹) concentration of NtBAM in the feed ([NtBAM]₀) was performed at 70 °C for 12 h, quantitatively producing poly(N-tert-butylacrylamide) particles with a number-average diameter (d _n) of 203 nm and a coefficient of variation (C _v) of 4.7%. The particle sizes were controlled in the d _ns range between 75 and 494 nm by changing the monomer feeds or adding an electrolyte such as NaCl. The solid contents in the resulting aqueous latex solutions ranged from 0.1 to 1.5%, whereas it increased to 4.8% by applying a “shot-growth” technique. The polymerization in water under a somewhat unique condition is described, which was started from a heterogeneous system due to the presence of significantly large amounts of monomers ([NtBAM]₀ = 50 g L⁻¹). This also provided monodisperse latexes with the d _n of 370 nm in 96% yield, in which the solid content reached 4.9%.     

Solvent extraction of silver trifluoromethanesulfonate from water into nitrobenzene in the presence of silver ionophore?IV

Abstract  

From extraction experiments in the two-phase water/nitrobenzene system, the stability constant of the silver ionophore IV (i.e., 5,11,17,23-tetra-tert-butyl-25,27-bis[2-(methylthio)ethoxy]calix[4]arene)–Ag⁺ complex in nitrobenzene saturated with water was determined. Furthermore, the most probable structure of the resulting complex was derived by means of density functional level of theory calculations.