High-throughput determination of seven trace elements in food samples by inductively coupled plasma-mass spectrometry

A method was developed for high-throughput determinations of 7 elements in food samples, namely antimony (Sb), arsenic (As), cadmium (Cd), chromium (Cr), lead (Pb), mercury (Hg), and tin (Sn). The samples were digested by closed-vessel microwave-assisted digestion using concentrated nitric acid (HNO3) as the medium, followed by microwave- assisted evaporation to concentrate the sample solutions before dilution to the desired volume. The microwave-assisted evaporation procedure effectively reduced the final acid concentration to around 8% before analysis by inductively coupled plasma-mass spectrometry (ICP-MS). This reduction allows determination by ICP-MS to proceed without further sample dilution, which would affect the detection limit. The method was validated, and method recoveries for As, Cd, Cr, Pb, and Hg were within the certified ranges of the chosen certified reference materials. Recoveries of the 7 elements from spiked samples ranged from 93.1 to 103.6%. The standard uncertainties of precision for the 7 elements were between 3.1 and 4.3%. Interlaboratory comparison studies for As, Cd, and Pb gave z-scores ranging from -0.2 to 0.3.     

Determination of trace elements in organic material by inductively coupled plasma-mass spectrometry

Summary For purposes of trace element analysis of organic materials a combined analytical procedure is tested. It consists of a pressure decomposition by nitric acid at 220° C in quartz vessels. The measurements are performed in the diluted digests by inductively coupled plasma/mass spectrometry. Analytical figures of merit are given.Dedicated to Prof. Dr. Karl Winsauer on the occasion of his 60th birthday.     

Open-channel chip-based solid-phase extraction combined with inductively coupled plasma-mass spectrometry for online determination of trace elements in volume-limited saline samples

In this study, we used an automated online chip-based solid-phase extraction (SPE)-inductively coupled plasma-mass spectrometry (ICP-MS) system for analyzing trace elements in small-volume saline samples (～15 μL). The proposed method involved the adsorption of trace metal ions in the interior of a functionalized poly(methyl methacrylate) (PMMA) channel in order to separate these ions from saline matrices. The adsorption of transition metal ions was presumably dominated by the surface complexation between the carboxylate moieties in the interior of the PMMA channel and the metal ions, which facilitated the formation of metal-carboxylate complexes. The components of the proposed online analytical system used for the simultaneous detection of multiple trace metals in saline samples involved microdialysis (MD) sampling, an established chip-based SPE procedure, and ICP-MS. The SPE-ICP-MS hyphenated system was optimized, and then, the analytical reliability of this system was further confirmed by using it to analyze the certified reference materials-SRM 2670 (human urine) and SRM 1643e (artificial saline water). The satisfactory analytical results indicated that the proposed on-chip SPE device could be readily used as an interface for coupling the MD probe with the ICP-MS system. The dramatically reduced consumption of chemicals and "hands-on" manipulations enabled the realization of a simplified and relatively clean procedure with extremely low detection limits in the range of 5.86-76.91 ng L(-1) for detecting Mn, Co, Ni, Cu, and Pb in 15-μL samples by ICP-MS. The effectiveness of an online MD-chip-based SPE-ICP-MS technique for continuous monitoring of trace elements in a simulated biological system was also demonstrated. To the best of our knowledge, this is the first paper to report the direct exploitation of a PMMA chip as an SPE adsorbent for online sample pretreatment and trace metal preconcentration prior to ICP-MS measurement.     

On-line preconcentration and determination of mercury in biological samples by flow injection vapour generation inductively coupled plasma atomic emission spectrometry

An FI-ICP-AES method for the determination of trace levels of mercury in biological samples has been described, which is based on the extraction of the mercury complex with 1,5-bis (di-2-pyridyl)methylene thiocarbonohydrazide (DPTH) on-line into isobuthyl-methyl ketone (IBMK). The organic phase (containing the complex) has been mixed on-line with SnCl₂ in N,N-dimethylformamide. Thus, mercury vapour can be generated directly from the organic phase and separated in a gas-liquid separation device. The detection limit for mercury is 4 ng/ml and the calibration curve is linear at least from 10 to 2500 ng/ml. The relative standard deviation for 10 replicate measurements is ±1% for 100 ng/ml of Hg(II). Results from the analysis of some certified biological reference materials are given.     

电感耦合等离子体质谱法测定地球化学样品中镉

采用HF-HClO4-HNO3-H2SO4分解样品,王水提取,选用4个国家一级标准物质制备成标准系列校准,ICP-MS法直接测定地球化学样品中的Cd。选择103Rh为内标,确定了仪器的最佳分析条件,研究了Zr,Sn对Cd的干扰,选择114Cd作为测定同位素,采用数学公式校正了Sn对Cd的同质异位素干扰,方法检测限(3s)为6.3×10-3μg/g,RSD(n=12)为3.9%～6.6%。经国家一级标准物质验证,测定值与标准值吻合较好。该方法适用于地球化学样品中的微量Cd的测定。     

Comparison of some newly synthesized chemically modified Amberlite XAD-4 resins for the preconcentration and determination of trace elements by flow injection inductively coupled plasma-mass spectrometry (ICP-MS)

XAD copolymer resins may be functionalized with heavy metal ion-selective ligands either by covalent linkage to the polymer backbone or by impregnation. These resins may be tailored to be specific for certain heavy metals by adjusting the retention and elution parameters. For the synthesis of immobilized Amberlite XAD-4 copolymer resins that are expected to preconcentrate a number of transition and heavy metals, the Schiff base method was chosen. For this purpose the copolymer was nitrated, reduced to the corresponding amine and converted to the imine compounds via a Schiff base reaction using different organic aldehyde compounds. The interactions of 8 elements (Cd, Co, Cu, Mn, Ni, Pb, U and Zn) with the resins were qualitatively investigated. Optimal pH for retention was typically 6-8 for most resins although one could be used at pH 5 and elution was achieved using 0.1 M HNO3. The resins were characterized by FTIR, SEM and elemental analysis. It was demonstrated that the resins could be used to preconcentrate ultra-trace analytes from natural waters, and analysis of environmental certified reference materials using FI-ICP-MS showed good agreement with the certified values. Metal retention capacities were also calculated using a batch system and were found to compare favorably with other resins reported in the literature.     

Determination of trace lead by hydride generation-inductively coupled plasma-mass spectrometry

A newly developed hydride generation-inductively coupled plasma-mass spectrometry (HG-ICP-MS) system was employed to determine trace amounts of lead in geological and biological samples. Laboratory-made single-stage and double-stage gas-liquid separators (GLSs) were investigated in order to replace the consumable membrane-GLS. Possible reasons were given why double-stage GLSs were superior over the single-stage ones according to the factors such as GLS volume and configuration, carrier gas inlet mode and flow rate. Interferences in liquid and vapor phase from concomitant ions and their products were investigated employing different flow mani-folds. Memory effects contributed to the blank values, but could be reduced employing a special wash protocol. Internal and external standardization were combined to improve the accuracy of the method, with bismuth as the internal standard according to its similarity with lead in the HG-ICP-MS system. Compared with ICP-MS and hydride generation-atomic fluorescence spectrometry (HG-AFS) methods, the system performance of HG-ICP-MS was characterized with improved detection limit to 0.002 ng/ml and acceptable short- and long-term stabilities. The linear dynamic range of this method was up to 50 ng/ml lead. Three Chinese national certified reference materials: poplar leaves, human hair and copper ore, were analyzed for method validation, and the results agreed well with the certified values. At last, the method was also employed to determine wide range of lead concentrations in lightweight limestone and nervous tissue samples from infants of albino rats with recoveries between 95 and 105% (n=10).     

On-line coupling of gel electrophoresis and inductively coupled plasma-mass spectrometry

The on-line coupling of gel electrophoresis with inductively coupled plasma-mass spectrometry (GE-ICP-MS) is a powerful tool for simultaneous separation, detection and quantification of bio-molecules, and has been applied to the determination of phosphorus in DNA, phosphoproteins, and phosphopeptides, gold in nano-particles, iron in metalloproteins, and iodine in aerosols, and cisplatin-oligonucleotide interactions. However, since the first report in 2005, relatively few papers have been published, perhaps reflecting the lack of familiarity with the benefits of this promising methodology. So, here for the first time, we critically review the applications of GE-ICP-MS, and explore the advantages and the limitations of the technique for various applications. Such scrutiny may be useful in not only the development of the technique but also highlighting its potential in proteomics, genomics and metallomics.     

浊点萃取-电感耦合等离子体质谱法测定植物样品中的痕量铂与钯

建立了浊点萃取电感耦合等离子体质谱法测定植物样品中痕量铂与钯的方法,方法检出限分别为0.17 ng/g和0.10 ng/g,样品加标回收率在85%～110%之间。利用建立的方法对采自北京环路旁的植物样品进行了测定,铂与钯含量范围分别为0.35～5.35 ng/g和1.95～10.85 ng/g,钯的含量普遍高于铂的含量。     

Development of column-pretreatment chelating resins for matrix elimination/multi-element determination by inductively coupled plasma-mass spectrometry

Chelating resins, two kinds of iminodiacetate derivatives (IDA) of cross-linked chitosan (CCS) were synthesized and investigated for adsorption capacity, matrix elimination and collection/concentration of analytes by a column pretreatment in a multi-element ICP-MS determination method. The adsorption behavior of 54 elements at the 10 ng ml(-1) level on chitosan derivatives in a packed mini-column was systematically examined. Almost 30 kinds of metal ions were recovered quantitatively at pH 5 with CCS-HP/IDA (cross-linked chitosan possessing N-2-hydroxypropyl iminodiacetic acid groups) column. Compared with available chitosan-iminodiacetate resin, CHITOPEARL CI-03, the recovery of the metal ions such as Cu, Pb and La is satisfactory with CCS-IDA (cross-linked chitosan possessing N,N-iminodiacetic acid groups) and CCS-HP/IDA using 2 M nitric acid as an eluent, which may be attributed to the difference of cross-linking and macroporous structure. Compared with Chelex-100, the adsorption efficiency is in the order: Chelex-100 > CCS-IDA > CCS-HP/IDA, especially in the chelating ability for alkaline earth metals. The resin with a longer spacer (CCS-HP/IDA) showed higher adsorption selectivity between heavy metal ions and alkaline earth metals at pH < 7. The separation efficiency of the major matrix cations in seawater (Na. K, Mg, Ca) has also been investigated, and matrix interference was negligible even in a seawater sample at pH 5 with CCS-HP/IDA. The recoveries of Mn at pH 5 with CCS-HP/IDA or Chelex-100 were almost 100%. However, those of Mg with each resin were 4 or 98%, respectively. The adsorption capacities of synthesized CCS-HP/IDA for Cu(II), Pb(II) and La(III) were 0.90, 0.65 and 0.34 mmol g(-1), respectively. Therefore, the chelating chitosan resins developed are applicable to the pretreatment of trace amounts of elements in various kinds of water samples.     

Determination of trace elements in human serum by inductively coupled plasma atomic emission spectrometry with flow injection

An analytical method for the simultaneous determination of some trace elements (Au, Fe, Mg, Li, Sr, Zn) in human serum by inductively coupled plasma atomic emission spectrometry (ICP-AES) with flow injection is described. Physical interference caused by the change of sample viscosity is discussed. When 100 μl of serum was injected, the relevant recoveries of > 99% for Li, > 98% for Cu and Mg, > 95% for Fe were obtained for an NIST SRM with R.S.D. > 1.3% using optimized flow injection parameters. The prepared lyophilized control serum for routine analysis in clinical laboratories was analyzed and verified for the validity of the technique employed in this experiment using NIST SRM 909 as a primary reference material.     

Neutron activation analysis and inductively coupled plasma-mass spectrometry for the determination of elements in tree stems

Mn, Zn and Al concentrations of ume, sakura and sugi stems determined by ICP-MS using a simple pretreatment were compared with those determined by INAA. We obtained a considerably good agreement between the two methods. ICP-MS using simple pretreatment was found to be useful in analyzing the elements in tree stems.     

Determination of metals in composite diet samples by inductively coupled plasma-mass spectrometry

A study was conducted to evaluate the applicability of inductively coupled plasma-mass spectrometry (ICP-MS) techniques for determination of metals in composite diets. Aluminum, cadmium, chromium, copper, lead, manganese, nickel, vanadium, and zinc were determined by this method. Atmospheric pressure microwave digestion was used to solubilize analytes in homogenized composite diet samples, and this procedure was followed by ICP-MS analysis. Recovery of certified elements from standard reference materials ranged from 92 to 119% with relative standard deviations (RSDs) of 0.4-1.9%. Recovery of elements from fortified composite diet samples ranged from 75 to 129% with RSDs of 0-11.3%. Limits of detection ranged from 1 to 1700 ng/g; high values were due to significant amounts of certain elements naturally present in composite diets. Results of this study demonstrate that low-resolution quadrupole-based ICP-MS provides precise and accurate measurements of the elements tested in composite diet samples.     

Microwave digestion methods for the determination of trace elements in brain and liver samples by inductively coupled plasma mass spectrometry

Two microwave digestion systems (open-focused and closed-pressurized) were tested for the mineralization of human brain and bovine liver (NIST SRM 1577a) as dissolution steps prior to the determination of 16 trace elements (Bi, Cd, Co, Cs, Cu, Fe, Hg, Mn, Mo, Pb, Rb, Sb, Sn, Sr, Tl, and Zn) by inductively coupled plasma mass spectrometry (ICP-MS). Digestion parameters (mass of sample, digestion mixture, and power/time steps) were optimized using temperature and pressure sensors. Digestions with the open-focused microwave system require larger volumes of conc. HNO₃ and 30% H₂O₂ than digestions with the closed-pressurized system. Both systems produce correct results for the bovine liver samples. The concentrations obtained for the digests of the open-focused system tend to be less precise than the concentrations from the closed-pressurized digests. Because the open-focused digests must be diluted to 50 mL to bring the acid concentration to 0.7–2.0 mol/L required by the ICP-MS (closed-pressurized digests need to be diluted to only 20 mL), the detection limits for the system with the open-focused digestion are higher than for the system with the closed-pressurized digestor. The open-focused digestor cannot handle more than 150 mg brain tissue, whereas the closed-pressurized system can mineralize 470 mg. The latter method gave better results with brain tissue than the open-focused system. The preparation of brain tissue as reference material for the determination of trace elements in brain samples is described.     

Microwave digestion methods for the determination of trace elements in brain and liver samples by inductively coupled plasma mass spectrometry

Two microwave digestion systems (open-focused and closed-pressurized) were tested for the mineralization of human brain and bovine liver (NIST SRM 1577a) as dissolution steps prior to the determination of 16 trace elements (Bi, Cd, Co, Cs, Cu, Fe, Hg, Mn, Mo, Pb, Rb, Sb, Sn, Sr, Tl, and Zn) by inductively coupled plasma mass spectrometry (ICP-MS). Digestion parameters (mass of sample, digestion mixture, and power/time steps) were optimized using temperature and pressure sensors. Digestions with the open-focused microwave system require larger volumes of conc. HNO(3) and 30% H(2)O(2) than digestions with the closed-pressurized system. Both systems produce correct results for the bovine liver samples. The concentrations obtained for the digests of the open-focused system tend to be less precise than the concentrations from the "closed-pressurized" digests. Because the "open-focused" digests must be diluted to 50 mL to bring the acid concentration to 0.7-2.0 mol/L required by the ICP-MS (closed-pressurized digests need to be diluted to only 20 mL), the detection limits for the system with the open-focused digestion are higher than for the system with the closed-pressurized digestor. The open-focused digestor cannot handle more than 150 mg brain tissue, whereas the closed-pressurized system can mineralize 470 mg. The latter method gave better results with brain tissue than the open-focused system. The preparation of brain tissue as reference material for the determination of trace elements in brain samples is described.     

Employing multivariate calibration for the determination of radionuclides by inductively coupled plasma-mass spectrometry

A method for the simultaneous ICP-MS determination of α- and β-emitting radionuclides in acid digested samples of concrete without further sample pretreatment is presented. Spectral and non-spectral interferences are corrected for by combining systematic internal standardization with bilinear multivariate calibration. Consequently, especially for radionuclides with long half-lives, ICP-MS is an alternative to radiometric analytical methods. The optimal multivariate calibration approach is the PLS1-model with preselected variables.     

Arsenic speciation in water and biota samples at trace levels by ion chromatography inductively coupled plasma-mass spectrometry

A sensitive, reliable, simple and rapid analytical method was developed for the determination of arsenite [As(III)], arsenate [As(V)] and arsenobetaine (AsB) species using ion chromatography combined with inductively coupled plasma-mass spectrometry (IC-ICP-MS). Inorganic and organic arsenic species were separated with an anion exchange column (Dionex AS9) and a 50 mM sodium bicarbonate mobile phase (pH 10) at a flow rate of 1.0 mL min^?1. %RSD values were found to be lower than 5.1% for all arsenic species. The limits of detection (LOD) obtained for As(III), As(V) and AsB were 16.5 ng L^?1, 14.1 ng L^?1 and 6.2 ng L^?1, respectively. The developed analytical method was tested using AsB certified reference material (NMIJ CRM 7901-a), and spring water certified reference material (UME CRM 1201) for accuracy check. This method was applied for the quantitative determination of arsenic species in different water samples and chicken samples as a solid matrix.     

A new HF-resistant tandem spray chamber for improved determination of trace elements and Pb isotopes using inductively coupled plasma-mass spectrometry

The use of a new HF-resistant tandem spray chamber arrangement consisting of a cyclonic spray chamber and a Scott-type spray chamber made from PFA and PEEK provides a straightforward approach for improving the performance of inductively coupled-mass spectrometry (ICP-MS). The characteristics of the tandem spray chamber were critically evaluated against a PEEK cyclonic and a PFA Scott-type spray chamber, respectively. Sensitivity across the entire mass range was increased by about three times compared to the conventional setup utilizing only one spray chamber. Precision of the results, especially at low signal intensities, improved by 160% and 31% compared to the cyclonic and Scott-type spray chamber, respectively. Using the tandem spray chamber, the oxide formation rate was lowered by about 50%. Signals as low as 30 counts could be determined under routine measurement conditions with a RSD of 2.4% thus allowing to precisely quantify small concentration differences at the ng l^− 1 concentration level. The excellent precision (0.02–0.07%) of ²⁰⁶Pb / ²⁰⁷Pb and ²⁰⁶Pb / ²⁰⁸Pb ratios determined in pore water samples was rather limited by the instrumental capabilities of the single collector ICP-MS instrument than by the performance of the tandem spray chamber.