Preparation and thermal degradation of methyl methacrylate-methacrylic acid copolymers

Copolymers of methyl methacrylate with methacrylic acid, with the mole fraction of methacrylic acid units from 0.21 to 0.73, were prepared by radical copolymerization in the bulk. The influence of the composition of the copolymers on the features of their thermal degradation was examined by combined thermal analysis involving differential scanning calorimetry and thermogravimetry.     

Solvent effects in the free radical copolymerization of vinyl acetate and methyl methacrylate

A study was made of the effects of five solvents on the compositions of copolymers of vinyl acetate (VA) and methyl methacrylate (MMA) produced by free radical polymerization from feeds rich in VA. The MMA content was reduced significantly by propanol, unaffected by benzene and ethyl acetate and increased by acetonitrile and acetone. The effects observed for propanol, acetonitrile and acetone all reached a maximum at a solvent to monomer molar ratio of about 7:1. Experiments showed that neither monomer physical aggregation nor monomer carbonyl polarization phenomena could explain completely the observed effects. A complete explanation probably requires several factors including some associated with polymer radical reactivity.     

Reversible addition-fragmentation chain transfer radical copolymerization of β-pinene and methyl acrylate

The feasibility of radical copolymerization of β-pinene and methyl acrylate (MA) was clarified for the first time. The monomer reactivity ratios were evaluated by Fineman-Ross, Kelen-Tudos and non-linear methods, respectively. The obtained values were r_β-pinene ∼ 0 and r_MA ∼ 1.3, indicating that the copolymerization led to polymers rich in methyl acrylate units and randomly alternated by single β-pinene unit. The addition of Lewis acid Et₂AlCl to the AIBN-initiated copolymerization enhanced the incorporation of β-pinene. Furthermore, the possible controlled copolymerization of β-pinene and MA was then attempted via the reversible addition-fragmentation transfer (RAFT) technique. The copolymerization (f_β-pinene = 0.1) using 1-methoxycarbonyl ethyl dithiobenzoate (MEDB) as a RAFT agent gave copolymers with lower molecular weight and narrower molecular weight distribution. However, the presence of MEDB strongly retarded the copolymerization. Thus a new RAFT agent 1-methoxycarbonyl ethyl phenyldithioacetate (MEPD), which gives a less stable macroradical intermediate than MEDB, was synthesized and introduced to the copolymerization. As anticipated, a much smaller retardation was observed. Moreover, the copolymerization displayed a somewhat controlled features within a certain overall conversion (<∼40%).     

Statistical radical copolymerization of styrene and methyl methacrylate in a room temperature ionic liquid

Use of a room temperature ionic liquid as the medium for conventional free radical copolymerization of styrene and methyl methacrylate resulted in reactivity ratios that were significantly different from those obtained in conventional organic solvents or in bulk, demonstrating that polymerization in this alternative medium offers potential to create copolymers having new monomer sequences.     

Reactivity ratios in conventional and nickel-mediated radical copolymerization of methyl methacrylate and functionalized methacrylate monomers

Copolymerization of an excess of methyl methacrylate (MMA) relative to 2-hydroxyethyl methacrylate (HEMA) was carried out in toluene at 80 °C according to both conventional and controlled Ni-mediated radical polymerizations. Reactivity ratios were derived from the copolymerization kinetics using the Jaacks method for MMA and integrated conversion equation for HEMA (r_MMA = 0.62 ± 0.04; r_HEMA = 2.03 ± 0.74). Poly(ethylene glycol) α-methyl ether, ω-methacrylate (PEGMA, M_n = 475 g mol⁻¹) was substituted for HEMA in the copolymerization experiments and reactivity ratios were also determined (r_MMA = 0.75 ± 0.07; r_PEGMA ∼ 1.33). Both the functionalized comonomers were consumed more rapidly than MMA indicating the preferred formation of heterogeneous bottle-brush copolymer structures with bristles constituted by the hydrophilic (macro)monomers. Reactivity ratios for nickel-mediated living radical polymerization were comparable with those obtained by conventional free radical copolymerization. Interactions between functional monomers and the catalyst (NiBr₂(PPh₃)₂) were observed by ¹H NMR spectroscopy.     

Kinetics of radical copolymerization—IX: Investigation of the effect of molecule inhibitors in copolymerization—2 copolymerization of acrylonitrile and methyl acrylate in solution

Inhibition kinetic measurements were carried out with p-nitrosodiphenylamine as a molecule inhibitor in acrylonitrile-methyl acrylate copolymerization in solution. The effect of dilution on the stoichiometry of inhibition (μ) was studied at various initial monomer compositions. The value of μ for the investigated inhibitor depends on the solvent concentration (s). The relationship between μ and s was interpreted in terms of the hot radical theory.     

Relative reactivities of isopropyl,ethyl and methyl groups in the gas-phase side-chain deprotonation of alkylaromatic radical cations

The relative reactivity of isopropyl, ethyl and methyl groups in the gas-phase side-chain deprotonation of alkylaromatic radical cations by some pyridines has been determined by using Fourier transform mass spectrometry.     

Classical and pseudoliving radical copolymerization of vinyl acetate and acrylic acid in methanol

The homogeneous free-radical copolymerization of vinyl acetate and acrylic acid is studied at 50 and 70°C in methanol with and without the reversible addition-fragmentation chain-transfer agent benzyl dithiobenzoate. It is shown that, under conditions of reversible addition-fragmentation chain-transfer copolymerization, the limiting conversion is 32% and the number-average molecular mass increases linearly with conversion. At the same time, in the absence of the reversible addition-fragmentation reversible chain-transfer agent, the conversion of the monomers amounts to 63% and the molecular mass of the copolymers decreases with conversion.     

Graft copolymerization of methyl methacrylate to poly(vinyl alcohol) initiated by ferric ion-hydrogen peroxide system

The reaction occurring on treatment of samples of poly(vinyl alcohol) previously oxidized by sodium hypochlorite with ferric ion and hydrogen peroxide was studied. The graft copolymerization taking place on adding methyl methacrylate to the above system was also studied. Early in the reaction there was a period during which hydrogen peroxide was greatly reduced by the poly(vinyl alcohol), and this corresponded with a rapid cleavage reaction of the main chain of the polymer. Moreover, it was found that the reaction was quantitatively proportional to the formation of carbonyl groups in the sample. On the other hand, very few grafts were scarcely formed during this period; they formed by a mild reaction which took place immediately after this period. It seems that this behavior is quite different from that observed with the ceric ion initiating system. It is presumed that the formation of grafts is due to radicals formed by the cleavage of the main chain, and that the structure of the copolymer so formed is something like a block polymer.     

Free radical copolymerization of 1-vinyl naphthalene with styrene,methyl methacrylate,and acrylonitrile

Investigations on free radical copolymerization of 1-vinyl naphthalene (1-VNph, monomerM ₂) with styrene (St), methyl methacrylate (MMA) and acrylonitrile (AN) (monomersm ₁) in bulk at 60°C with AIBN as initiator are presented. Relative reactivity ratios were calculated by the Kelen-Tüdös method yielding:r _st=0.70 ±0.23 andr _1–VNph=2.02 ±0.40 for system St/1-VNph;r _MMA=0.32 ±0.10 andr _1–VNph=0.57 ±0.07 for system MMA/1-VNph andr _AN=0.11 ±0.03 andr _1–VNph=0.45 ±0.09 for system AN/1-VNph.Q, e values for 1-VNph according to Alfrey, Price scheme were calculated toQ _1–VNph=1.02,e ₁–VNph=–0.62.     

Solvent effects on radical copolymerization of acrylonitrile and methyl acrylate: solvent polarity and solvent-monomer interaction

Abstract

New insights for the effects of organic solvent polarities and solvent-monomer interactions on the radical copolymerization for an important copolymer, poly(acrylonitrile-co-methyl acrylate) (PAN-co-MA), were provided in this research. Solvents, dimethylformamide (DMF), dimethylacetamide (DMAc) and dimethyl sulfoxide (DMSO), were used as reaction media. The polarity of these solvents was in the sequence of DMAc?<?DMF?<?DMSO. By studying the reactivity ratios of AN and MA, the triad fractions of the resultant copolymers, the interactions between monomers and solvents, and the compositions of copolymers at various conversions, we concluded that the solvent polarity had minimal influence on the copolymerization of AN and MA, while the solvent-monomer interactions played important roles. The interactions between monomer-monomer, monomer-solvent, and solvent-solvent, were calculated based on quantum chemistry methods. Both theoretical calculations and experimental results suggested that AN and MA in DMSO tended to aggregate locally, while they could be homogeneously dissolved in DMAc and DMF. The interactions between solvent and monomers could cause local monomer concentration variations, or ‘bootstrap’ effect, which is one of the critical factors affecting the copolymerization process of AN and MA and the chemical structures of the resultant polymers.     

HCO radical kinetics: Conjunction of laser photolysis and intracavity dye laser spectroscopy

HCO radical at a concentration of about 10¹⁴ cm^?3 is produced by monochromatic laser photolysis of H₂CO with a 0.6 mJ frequency-doubled, flashlamp-pumped dye laser pulse. Intracavity dye laser spectroscopy quantitatively monitors HCO absorbance near 614 nm as a function of delay time between photolysis and probing pulses. Rate constants for HCO + O₂ and HCO + NO are found to be 4.0 ± 0.8 × 10^?12 and 1.45 ± 0.2 × 10^?11 cm³ molecule^?1 sec^?1.     

Study of the microstructure of tetrahydrofuran-3,3 dimethyloxetane copolymers by 13C-NMR spectroscopy.

The microstructure of tetrahydrofuran (A)-3,3 dimethyloxetane (B) copolymers was studied by ¹³C-{¹H}-NMR spectroscopy. Only the methyl carbons corresponding to the 3,3 dimethyloxetane unit appear as a singlet, whereas the other carbons present a more complicated spectral pattern than it would be expected if ? effects were negligible. The assignment of the resonance signals allowed the determination of the values of the probabilities of the different triads, which were in good agreement with those obtained from the reactivity ratios.     

Reverse atom transfer radical random copolymerization of styrene and methyl methacrylate in the presence of diatomite nanoplatelets

Diatomite nanoplatelets were used for in situ random copolymerization of styrene and methyl methacrylate by reverse atom transfer radical polymerization to synthesize different well‐defined nanocomposites. Inherent features of the pristine diatomite nanoplatelets were evaluated by Fourier transform infrared spectroscopy, nitrogen adsorption/desorption isotherm, scanning electron microscope, and transmission electron microscope. Gas and size exclusion chromatography was also used to determine conversion and molecular weight determinations, respectively. Considerable increment in conversion (from 81% to 97%) was achieved by adding 3 wt% diatomite nanoplatelets in the copolymer matrix. Moreover, molecular weight of random copolymer chains was increased from 12 890 to 13 960 g·mol⁻¹ by addition of 3 wt% diatomite nanoplatelets; however, polydispersity index (PDI) values increases from 1.36 to 1.59. Proton nuclear magnetic resonance spectroscopy was used to evaluate copolymers composition. Thermal gravimetric analysis results indicate that thermal stability of the nanocomposites is improved by adding diatomite nanoplatelets. Differential scanning calorimetry shows an increase in glass transition temperature from 66°C to 71°C by adding 3 wt% of diatomite nanoplatelets.     

Study of the morphology of poly(methyl methacrylate) as polymerized by the redox system Ce(IV)–isopropyl alcohol

Methyl methacrylate has been polymerized in aqueous nitric acid at 30°C, with the redox system ceric ammonium nitrate–isopropyl alcohol as initiator. The gravimetric method has been used to follow the reaction. After a short induction period polymerization started, and conversion attained a maximum value with extent of reaction, whereas the ceric ion is exhausted. The size, distribution, and number of PMMA particles formed were measured by scanning electron microscope. From the electron micrographs it was found that the particles are formed over a short period, and that the particle size distribution seems to be determined by flocculation and coagulation of the particles, because these are not stabilized. Average-molecular weight was found to increase at high conversions and the molecular weight distribution became broader as particle size increased. Particle size increased with conversion, whereas the number of particles remained constant.     

Stereoregularity and polymerization mechanism of polymethacrylonitriles determined by 13C-NMR spectroscopy

Carbon-13 nuclear magnetic resonance (¹³C-NMR) spectra of polymethacrylonitriles prepared under various conditions were measured. In acetone solution, the α-methyl carbon absorptions were split into triads and partially into pentads, and the methylene carbon absorptions into tetrads. In trifluoroacetic acid solution, the α-methyl carbon absorptions were split into pentads and the cyano carbon absorptions into triads. The triad, tetrad, and pentad tacticities determined from ¹³C-NMR spectra were compared with dyad tacticities determined from proton NMR spectra. The stereoregularity of the polymers which are γ-ray-initiated in liquid phase at temperatures near melting point (?35.8°C) and in the solid state differs from that of the polymers radically initiated at ?20 to 80°C. The stereoregularity and the conversion suggest the existence of an ionic mechanism in the polymerization at low temperatures.