首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 265 毫秒
1.
离子液体中乙酸异山梨醇酯的合成   总被引:3,自引:0,他引:3  
刘红霞  王自民 《应用化学》2008,25(12):1502-0
以1-丁基-3-甲基咪唑六氟磷酸盐离子液体为溶剂,对新一代长效抗心绞痛药物单硝酸异山梨酯中间体异山梨醇进行了萃取分离,避免了使用高真空高温蒸馏;以酸性离子液体N-甲基咪唑硫酸氢盐为溶剂和催化剂,合成了中间体2-乙酸异山梨醇酯,产物结构经红外光谱确证.异山梨醇收率80%,2-乙酸异山梨醇酯收率86%.  相似文献   

2.
离子液体型表面活性剂研究   总被引:2,自引:0,他引:2  
易封萍  李积宗  陈斌 《化学学报》2008,66(2):239-244
以1-甲基咪唑为原料, 制备了6个常规离子液体: 1-正丁基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[bmim][BF4]及[bmim][PF6])、1-正己基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[hmim][BF4]及[hmim][PF6])、1-正十六烷基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[C16mim][BF4]及[C16mim][PF6])和4个功能化离子液体: 1-(2-羟乙基)-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[2-hemim][BF4]及[2-hemim][PF6])、1-乙氧羰基甲基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[eocmmim][BF4]及[eocmmim][PF6]). 研究了这两类离子液体的一些物理性能, 旨在挖掘离子液体在香料香精化妆品工业中的应用价值. 分别检测了它们与一般溶剂的互溶性, 并测定了它们的表面张力和发泡性能, 实验结果表明, 仅[C16mim][BF4]和[C16mim][PF6]具有发泡性能, 发泡力分别为68和120 mm.  相似文献   

3.
以2-二茂铁基苯并咪唑(2)为原料,合成了1-甲基-2-二茂铁基-3-乙基苯并咪唑碘盐(4)和六氟磷酸盐(5);甲酰化的2,2-双二茂铁基丙烷(6)与邻苯二胺在甲醇作溶剂,回流,碘催化下反应,得到2-[1’-(2-二茂铁基丙烷-2-基)二茂铁-1-基]苯并咪唑(7),以7为原料合成了1-甲基-2-[1’-(2-二茂铁基丙烷-2-基)二茂铁-1-基]-3-乙基苯并咪唑碘盐(9)和六氟磷酸盐(10).电化学分析表明所得的盐化合物中,与苯并咪唑阳离子直接相连的二茂铁的氧化电位相对2和7均产生了较大正移.对化合物4的单晶结构进行了解析,晶体结构中存在π-π堆积.UV-Vis吸收光谱表明所得盐化合物具有光致电荷迁移现象.DSC-TG(差示扫描量热-热重)测试表明碘盐4对高氯酸铵(AP)热分解有较好催化效果.  相似文献   

4.
水样中氟罗沙星和磺胺喹噁啉的离子液体均匀提取   总被引:1,自引:0,他引:1  
提出一种新的离子液体均匀提取方法,即向水样中加入可溶于水的离子液体1-己基-3-甲基咪唑四氟硼酸盐([C6MimBF4]),再加入过量六氟磷酸铵(NH4PF6),形成不溶于水的离子液体1-己基-3-甲基咪唑六氟磷酸盐([C6MimPF6]),水样中的氟罗沙星和磺胺喹噁啉被提取到[C6MimPF6]相,离心分离后,离子液体可直接用于HPLC分析.本法测得的氟罗沙星和磺胺喹噁啉的检出限分别为1.8和1.1μg/L.  相似文献   

5.
在298.15K下测定了1-正丁基-3-甲基咪唑四氟硼酸盐([Bmim][BF4])和1-正丁基-3-甲基咪唑六氟磷酸盐([Bmim][PF6])与不同分子溶剂混合体系的电导率。结果表明, 随着分子溶剂浓度的增大,离子液体的摩尔电导率逐渐增大,离子液体在溶液中的摩尔电导率可以用纯离子液体的摩尔电导率、分子溶剂的介电常数和摩尔体积进行关联。  相似文献   

6.
离子液体与传统有机溶剂萃取性能的比较研究   总被引:15,自引:3,他引:12  
付新梅  戴树桂  张余 《分析化学》2006,34(5):598-602
利用离子液体1-甲基-3-丁基咪唑六氟磷酸盐(C4)和1-甲基-3-己基咪唑六氟磷酸盐(C6)以及传统有机溶剂二氯甲烷作萃取溶剂,研究了它们在不同条件下萃取水环境中的环境内分泌干扰物壬基酚和辛基酚的萃取性能,结果表明,二氯甲烷达萃取平衡的时间(20min)比离子液体(60min)短;当水相的pH值发生变化时,离子液体和二氯甲烷的萃取率均随pH值的增大而降低;盐析效应显示离子液体受盐效应影响很小,而二氯甲烷受盐效应的影响大;壬基酚和辛基酚浓度增大导致萃取率降低;离子液体和二氯甲烷的萃取率均随温度的升高而升高,适当的提高温度有利于萃取率的提高。用离子液体萃取水溶液中有机物质,表现出和传统萃取溶剂相类似的一些性质,如酸度、温度、分析物的浓度均对其萃取率有一定影响。  相似文献   

7.
吡咯烷酮酸性离子液体中硼酸酯的催化合成   总被引:1,自引:0,他引:1  
研究了硼酸与频哪醇和环己醇在离子液体1-甲基-2-吡咯烷酮硫酸氢盐([Hnmp]HSO4)、1-丁基-3-甲基咪唑四氟硼酸盐([Bmim]BF4)及1-丁基-3-甲基咪唑六氟磷酸盐([Bmim]PF6)中生成2-环己氧基-4,4,5,5-四甲基-1,3,2-二氧硼烷的酯化反应。 考察了不同离子液体、反应温度、反应时间和离子液体与反应物物质的量比等对反应的影响。 结果表明,当n(硼酸)∶n(频哪醇)∶n(环己醇)∶n([Hnmp]HSO4)=1∶1∶1∶1,反应温度为70 ℃和反应时间为4 h时,硼酸酯的产率为72.5%,离子液体重复使用4次,催化活性无明显降低。  相似文献   

8.
室温离子液体催化“一锅法”合成3, 4-二氢嘧啶-2-酮   总被引:17,自引:0,他引:17  
利用室温离子液体作催化剂,芳香醛、尿素和乙酰乙酯或乙酰丙酮三组分缩合制备3,4-二氢嘧啶-2-酮衍生物,反应条件温和,反应时间短,且不需另加有机溶剂,考察了不同取代基对芳香醛、尿素和乙酰乙酸乙酯或乙酰丙酮三组分缩合反应的影响。还考察了不同的室温离子液体的催化性能,发现1-丁基-3-甲基咪唑六氟磷酸盐较1-丁基-3-甲基咪唑四氟硼酸盐的催化效果略好。  相似文献   

9.
刘霖  魏运洋  岳彩波  季柳燕 《应用化学》2007,24(11):1327-1331
2,2,6,6-四甲基-N-氧自由基哌啶醇(2,2,6,6-tetramethyl-piperidin-4-ol-N-oxyl,TEMPO)与氯乙酰氯反应生成2-氯乙酸-2,2,6,6-四甲基-1-氧-4-哌啶醇酯,该酯与N-甲基咪唑发生季铵化反应后再与六氟磷酸钾进行离子交换制得2,2,6,6-四甲基-N-氧自由基哌啶醇负载离子液体TEMPO-IL。温和条件下以离子液体1-甲基-3-丁基咪唑六氟磷酸盐(1-butyl-3-methylimidazolium hexafluorophosphate,[bmim]PF6)为溶剂,TEMPO-IL和CuCl为催化剂,分子氧氧化各种醇为相应的醛或酮。研究发现,该氧化体系对苄醇和烯丙醇有较好的氧化效果,65℃下反应10h左右,转化率可达99%,收率可达80%~90%。氧化体系对醛酮有高度的选择性,在实验所采用的条件范围内未检测到有羧酸生成。溶剂和催化剂可循环使用,在苯甲醇的氧化中,溶剂和催化剂循环使用6次,反应转化率和苯甲醛的收率保持不变。  相似文献   

10.
用电化学线性扫描伏安法(LSV)测定1-丁基-3-甲基咪唑六氟磷酸盐([BMIM]PF_6)离子液体中噻吩的浓度。实验结果表明:在LSV方式下,用乙腈作为离子液体的稀释剂,且乙腈与1-丁基-3-甲基咪唑六氟磷酸盐离子液体的摩尔比为13∶5,在室温条件下,噻吩的浓度在1 000~30 000μg/g范围内时其浓度与溶出峰电流之间成线性关系,相关系数R~2=0.99,检出限为216.78μg/g。该检测噻吩的电化学方法简单快速,具有较宽的线性范围和较低的检出限,可以应用于1-丁基-3-甲基咪唑六氟磷酸盐离子液体中噻吩浓度的检测。  相似文献   

11.
This work demonstrates the ability of the 1-alkyl-3-methylimidazolium hexafluorophosphate to act as an extraction solvent in petrochemical processes for the removal of alkanes from their azeotropic mixture with ethanol. LLE (liquid–liquid equilibrium) of the ternary systems hexane + ethanol + 1-hexyl-3-methylimidazolium hexafluorophosphate (HMIM PF6) or 1-octyl-3-methylimidazolium hexafluorophosphate (OMIM PF6) and heptane + ethanol + OMIM PF6 are carried out at 298.15 K and atmospheric pressure. Experimental liquid–liquid data are correlated by using different equations. The solute distribution ratio and the selectivity, determined from tie-line data, suggest the efficiency of the ILs used as solvents. A comparison with other IL, in terms of solvent capacity, is included. The liquid–liquid extraction process is simulated by using conventional software and the obtained results are shown.  相似文献   

12.
Two ionic liquids were synthesized, each system consisting of the 1-hexyl-3-methylimidazolium ion ([hmim]+) as the cation and either hexafluorophosphate ([PF6]), or perchlorate ([ClO4]) as the anions. This study involves the synthesis of methyl orange (4-[[(4-dimethylamino)phenyl]-azo] benzene sulfonic acid sodium salt) using the ionic liquids as replacement solvents for the reaction. The advantage of using ionic liquids as substitutes for organic solvents includes: recyclable/reclaimable solvents, stabilization of intermediates and higher product yields. The 1-hexyl-3-methylimidazolium derivatives can be used for syntheses conducted at low temperatures and are less toxic than typical organic solvents.  相似文献   

13.
The homogeneous ionic liquid microextraction was applied to the extraction of hormones from cosmetics and the hormones were determined by high-performance liquid chromatography. 1-Hexyl-3-methylimidazolium tetrafluoroborate was used as extraction solvent. Ammonium hexafluorophosphate as used as ion-pairing agent. Several experimental parameters, including the volume of 1-hexyl-3-methylimidazolium tetrafluoroborate, amount of ammonium hexafluorophosphate and sodium chloride, extraction and centrifuge time, and the pH value, were optimized. The limits of detection and quantification for the analytes ranged from 0.03 to 0.24 ng/mL and from 0.10 to 0.79 ng/mL, respectively. The precision for determining the hormones was lower than 5.2%. The proposed method was successfully developed for the determination of hormones in real cosmetic samples.  相似文献   

14.
[reaction: see text]. Room-temperature ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium bromide, and 1-butyl-3-methylimidazolium chloride, are used as "green" recyclable alternative to chlorinated solvents for the stereoselective halogenation of alkenes and alkynes.  相似文献   

15.
Yanfei Shen 《Talanta》2009,78(3):805-808
Although colorless ionic liquids (ILs) are most desirable, as synthesized they frequently bear color, despite appearing pure by most analytical techniques. It leads to some uncertainties and limits for the fundamental research and applications of ILs, such as spectroscopy. Using 1-butyl-3-methylimidazolium bromide (BMIMBr), 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4) and 1-hexyl-3-methylimidazolium bromide (HMIMBr) as models, we demonstrated that following classic preparing method except that the water was added as solvent, colorless ILs could be facilely prepared. Neither critical pre-treatment of starting materials and pre-cautions during the reaction nor time-consuming and costly post-decolor-purification was needed. The effects of “on water” reaction conditions on preparing colorless IL and the reason why using water as solvent could produce colorless ILs were also preliminary investigated. It was found that the reactant solubility played an important role in the preparation of colorless ILs. Not only as a method to evaluate the quality of as-synthesized ILs, but also as a spectroscopic analytical applications, UV-vis spectra showed that the ILs by this “on water” method was spectral pure and sufficient for future fundamental spectroscopic research and applications.  相似文献   

16.
Alkylbenzenes were subjected to bromination with molecular bromine using 1-butyl-3-methylimidazolium bromide as solvent. A complex of 1-butyl-3-methylimidazolium bromide with bromine was synthesized. It ensured bromination of alkylbenzenes with no bromine and solvent. The results of bromination in binary solvents and ionic liquids, 1-butyl-3-methylimidazolium bromide and tribromide were compared. The bromination of ethylbenzene with 1-butyl-3-methylimidazolium tribromide was accompanied by formation of a considerable amount of α-bromoethylbenzene, which is not typical of electrophilic aromatic substitution process.  相似文献   

17.
Impact of ionic liquid physical properties on lipase activity and stability   总被引:17,自引:0,他引:17  
Lipase activity and stability was investigated in dialkylimidazolium and pyrrolidinium-based ionic liquids with a variety of anions including hexafluorophosphate, acetate, nitrate, methanesulfonate, trifluoroacetate, and trifluoromethylsulfonate. The initial rate of lipase-catalyzed transesterification of methyl methacrylate in these ionic liquids and several organic solvents was examined as well as the polytransesterification of divinyl adipate and 1,4-butanediol. Free lipase (Candida rugosa) catalyzed the transesterification of methyl methacrylate in 1-butyl-3-methylimidazolium hexafluorophosphate at a rate 1.5 times greater than in hexane. However, no detectable activity was observed in all the "hydrophilic" ionic liquids studied. Methods of enzyme stabilization including adsorption, PEG-modification, and immobilization in polyurethane foam were ineffective in improving enzymatic activity in the hydrophilic ionic liquids. Polytransesterifications performed in 1-butyl-3-methylimidazolium hexafluorophosphate using Novozym 435 produced polyesters with weight average molecular weights limited to 2900 Da due to precipitation of the polymer. Solvatochromic studies and partition coefficient measurements suggest that ionic liquids are more polar and hydrophilic than organic solvents such as hexane, acetonitrile, and tetrahydrofuran. Stability studies indicate that lipases exhibit greater stability in ionic liquids than in organic solvents including hexane.  相似文献   

18.
Hirayama N  Deguchi M  Kawasumi H  Honjo T 《Talanta》2005,65(1):255-260
Possible use of room temperature ionic liquids (RTILs) as chelate extraction solvent was evaluated by using 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF6]) and 1-octyl-3-methylimidazolium hexafluorophosphate ([omim][PF6]). These RTILs showed high extraction performance for divalent metal cations with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione (Htta). The extracted metals were back-extracted into 1 mol dm−3 nitric acid quantitatively. Furthermore, the extracted species were estimated as neutral hydrated complexes M(tta)2(H2O)n (n= 1 or 2) for M = Ni, Cu and Pb and anionic complexes M(tta)3 for M = Mn, Co, Zn and Cd.  相似文献   

19.
室温离子液体催化巯基乙酸异辛酯的合成   总被引:1,自引:1,他引:0  
巯基乙酸异辛酯是一种广泛应用于精细化工、树脂和塑料制造的中间体,尤其在聚氯乙烯无毒制品中有着重要用途[1],其合成方法的改进也成为研究的主要课题之一。巯基乙酸异辛酯的合成通常采用硫酸催化法[2],由于浓硫酸污染环境、腐蚀设备,特别是近年来环保法规对环境和安全性不断提高的要求,用固体酸(分子筛、离子交换树脂、固体超强酸)等取代H2SO4、HF、A lC l3等强腐蚀性酸作为催化剂的催化工艺获得明显进展[3],但这些催化剂也有自身的缺点[4]。室温离子液体是近年来受到极大关注的一类新材料,它为人们探索环境友好的催化体系和溶剂提供了…  相似文献   

20.
Raman spectra of the ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([C4mim][PF6]), 1-hexyl-3-methylimidazolium chloride ([C6mim]Cl), and 1-hexyl-3-methylimidazolium hexafluorophosphate ([C6mim][PF6]), and binary mixtures thereof, have been assigned using ab initio MP2 calculations. The previously reported anti and gauche forms of the [C4mim]+ cation have been observed, and this study reveals this to be a general feature of the long-chain 1-alkyl derivatives. Analysis of mixtures of [C6mim]Cl and [C6mim][PF6] has provided information on the nature of the hydrogen bonding between the imidazolium headgroup and the anions, and the invariance of the essentially 50:50 mixture of the predominant conformers informs on the nature of glass formation in these systems.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号