Density Functional Theory Study of C2Hx（x=4～6） Adsorption on the Fe（110） Surface

The density functional theory(DFT) and self-consistent periodic calculation were used to investigate the C2Hx(x = 4～6) species adsorption on the Fe(110) surface. The adsorption energy and equilibrium geometry of the species C2Hx(x = 4～6) on four possible sites(top,hcp,SB and LB) on the Fe(110) surface were predicted and compared. Mulliken charges and density of states analysis of the most stable site have been discussed. It is found that the species of C2H6 and C2H5 are adsorbed strongly on the Fe(110) surface with calculated adsorption energy of -80.24 and -178.89 kJ·mol-1 at the Fe-LB(long-bridge) ,respectively. However,the C2H4 is adsorbed strongly on the Fe(110) surface with calculated adsorption energies of -114.96 kJ·mol-1 at the top. The results indicate that the charge transferring process can be completed by chemisorption between Fe(110) surface and the species. Moreover,the chemical bands can be formed by chemisorptions between the Fe(110) surface and the species,too.     

A Periodic Density Functional Study on Adsorption Properties of Methoxy on Au（111） Surface

1INTRODUCTION Methoxy(CH3O)has been identified as the first intermediate in the decomposition of methanol on extensive list of clean transition metal surfaces,such as Ni(100)[1],Cu(100)[2,3],Cu(111)[4],Ag(111)[5],Au(110)[6],Pd(111)[7]and Ru(0001)[8].The electronic structure of the metal is a determining factor in OH bond scission.In fact,group IB clean surfaces have shown very low activity towards this reaction,al-though there are reports on low amounts of methoxy formed on clean Cu(…     

Adsorption and Reaction of CN ＋ O → OCN on Cu（100） Surface： A Density Functional Theory Study

1 INTRODUCTION The determination of structures of adsorbed cya- nide (CN) and cyanate (OCN) on transition metal surfaces is important for understanding their bon- ding and reactivity in catalysis and other surface phenomena[1～4]. During the past decade, the adsorp- tion of CN and CN-containing on transition metal surfaces has received a great deal of attention in both experimental[5～20] and theoretical[1～5, 13, 20～33] inves-tigations, and the previous work about the adsorp- tion of…     

Density Functional Study of the C Atom Adsorption on the α-Fe2O3 （001） Surface

The adsorption of C atoms on the α-Fe2O3(001) surface was studied based on density function theory(DFT) ,in which the exchange-correlation potential was chosen as the PBE(Perdew,Burke and Ernzerhof) generalized gradient approximation(GGA) with a plane wave basis set. Upon the optimization on different adsorption sites with coverage of 1/20 and 1/5 ML,it was found that the adsorption of C atoms on the α-Fe2O3(001) surface was chemical adsorption. The coverage can affect the adsorption behavior greatly. Under low coverage,the most stable adsorption geometry lied on the bridged site with the adsorption energy of about 3.22 eV;however,under high coverage,it located at the top site with the energy change of 8.79 eV. Strong chemical reaction has occurred between the C and O atoms at this site. The density of states and population analysis showed that the s,p orbitals of C and p orbital of O give the most contribution to the adsorption bonding. During the adsorption process,O atom shares the electrons with C,and C can only affect the outermost and subsurface layers of α-Fe2O3;the third layer can not be affected obviously.     

Electronic Structures of O2 Molecules Chemisorbed on a（8,0） SWNT with Different Oxygen Contents：A Density Functional Theory Study

We report a theoretical study on the electronic structures of O2 chemisorbed on a(8,0) SWNT with different oxygen contents of 6.25,12.5 and 25%,respectively.On the basis of DFT calculations,we find that eight O2 molecules chemisorbed on the(8,0) SWNT aligned in the middle row of the circumference of the tube in proportional spacing way,is seen to become metallic,and a significant increase in conductivity is expected.There are different electronic structures of the functionalized systems related to different oxygen contents or O2 molecules' chemisorbed positions.     

Superoxide Complex [W4O12（O2^-）]： A Theoretical Study

Extensive DFT calculations are performed to optimize the geometric structures of O-rich tungsten oxide clusters, to simulate the PES spectra, and to analyze the chemical bonding. The ground-state structure of W4O14^- is best considered as W4O12（O2^-）, containing a side-on bound superoxide ligand. The current study indicates that the extra electron in W4O12^- is capable of activating dioxygen by non-dissociative electron transfer （W 5d → O2 π^＊）, and the anionic clusters can be viewed as models for reduced defect sites on tungsten oxide surfaces for the chemisorption of O2.     

Comparative Studies of 1,4-Bis[2-（4-Pyridyl）ethenyl]-benzene Using Density Functional Theory

The optimized molecular structure and harmonic vibrational frequencies of a 1,4-bis[2-(4-pyridyl)ethenyl]-benzene(BPENB)molecule were calculated via five popular density functional theory(DFT)methods.On the basis of the comparison between calculated and experimental results,it is concluded that the B3PW91 and B3LYP methods are superior to the others in optimizing structures,and the BPW91 method reproduces the observed fundamental frequencies most satisfactorily.     

Study of H2O and HOCH2CH2OH Adsorption on the Relaxation Surface of β-Si3N4（0001） by Density Functional Theory

Density functional theory （DFT） B3LYP method is used to theoretically investigate the adsorption conformations of H2O and glycol on the relaxation surface of β-Si3N4（0001） with cluster models. For H2O, the most stable structure is that adsorbed through the H atom lying above a N（3） site of the relaxation surface of β-Si3N4（0001）; while for glycol, it is the one adsorbed via the H atom lying above the center of Si（2） and N（3） of the same relaxation surface. The adsorption energy, adsorption bond and transfer electrons of the two adsorbed substances prove that glycol is easy to be adsorbed on the relaxation surface of β-Si3N4（0001）.     

A DFT Study of CO Adsorption on the Cu2O（111） Surface with Oxygen Vacancy

First-principles calculations based on density functional theory （DFr） and the generalized gradient approximation （GGA） have been used to study the adsorption of CO molecule on the Cu2O（111） oxygen-vacancy surface. Calculations indicate that the C-O bond is weakened upon adsorption compared with that over perfect surface. In addition, with the density increase of the defective sites, the adsorption energies of the defect-CO configuration increase whereas the C-O bond nearly remains constant.     

A Study on Thermal Decomposition of K_3[Fe(CN)_6] and KFe[Fe(CN)_6] in Helium

K3 [Fe(CN)6] and KFe[Fe(CN)6] are classical coordination compounds. However, the mechanism of decomposition reactions has not been well expounded. The gas products of thermal decomposition were examined by gas chroma tography (GC) , and the structure of the solid products by Mossbauer spectroscopy(MS) and X-ray diffraction(XRD). The findings are explained in terms of the theory of coordination chemistry and a decomposition mechanism is proposed in this study. On the basis of various experimental results, the first stage of the decomposition of K3[Fe(CN)6] in He was found to be the evolution of(CN)2 resulting in the reduction of Fe(Ⅲ)12K3 [Fe(CN)6]→9K4[Fe(CN)6] + Fe2 [Fe(CN)6] + 6 ( CN )For KFe [Fe(CN) 6 ], the first stage of decomposition man be represented as6KFe[Fe(CN)6]→3K2Fe[Fe(CN)6] + 2Fe2[Fe(CN)6 + 3(CN)2At higher temperatures, the decomposition of both K3[Fe(CN)6) andKFe[Fe(CN)6] to form KCN and Fe2C was accomplished by the release of(CN)2 and N2.     

SiO2·(CO)n(n=1～2)结构和属性的理论研究

用密度泛函理论详细地研究了SiO2·(CO)n(n=1～2)的结构和属性.研究表明,SiO2·CO是一个T形的具有C2v对称性的分子,SiO2·(CO)2具有C2对称性的分子;频率计算结果与实验值一致,CO在与SiO2成键过程中,C-O伸缩振动频率有所增加,说明静电势在复合过程中起了重要作用;基组重叠误差(BSSE)修正在计算相互作用能时不可忽视,相互作用能和解离能的计算以及NBO分析表明,SiO2·(CO)2中的SiO2与CO之间的作用相对SiO2·CO来说较弱;SiO2和CO2与CO的成键特点不同,主要是缘于SiO2与CO2的能隙不同.     

应用Fe2+与K3[Fe(CN)6]反应测定还原性物质Vc

在pH 2～3的溶液中,低浓度Fe^2＋与K3[Fe（CN）6]反应产生的蓝色沉淀为近似真溶液,最大吸收波长为710 nm.形成的近似真溶液吸光度随静置时间变化而逐渐变大,30 min后吸光度变化缓慢.K3[Fe（CN）6]过量时,Fe^2＋浓度与吸光度呈很好的线性关系.Fe^2＋浓度较大时,易形成絮状沉淀.在pH 2～3的Fe^3＋-K3[Fe（CN）6]体系中,加入Vc能将Fe^3＋还原成Fe^2＋,进而与K3[Fe（CN）6]反应,30 min后测定蓝色拟真溶液的吸光度,Vc的量与溶液的吸光度同样有很好的线性关系,线性相关系数R〉0.999,检出限为0.94μg.     

碱性电解液中K3[Fe(CN)6]在锌阳极上的自发还原和吸附延长锌镍电池的循环寿命

采用K₃[Fe(CN)₆]作为锌镍电池的电解液添加剂,克服了锌阳极的变形。此外,通过一系列实验设计和表征,探索了电解液中金属锌与K₃[Fe(CN)₆]的反应机理。通过XRD (X-ray diffraction)和XPS (X-ray photo-electron spectroscopy)测试,我们发现金属锌在KOH水溶液中能够与K₃[Fe(CN)₆]反应,将[Fe(CN)₆]^3–还原为[Fe(CN)₆]⁴⁻。添加K₃[Fe(CN)₆]的锌镍电池实现了更长的循环寿命,比不添加K₃[Fe(CN)₆]的锌镍电池长3倍以上。在相同循环次数下,改性电解质中锌阳极循环不仅形状变化较小,而且没有出现“死”锌现象,电极添加剂和粘结剂也没有发生偏析。此外,不同于一般的有机添加剂,K₃[Fe(CN)₆]的加入不仅不会增大电极的极化,还能够提高锌镍电池的放电容量和倍率性能。因此,考虑到这一改性策略有着较高的可行性和较低的成本,K₃[Fe(CN)₆]添加剂在锌镍电池的实际应用中具有极大的推广潜力。     

碱性电解液中K3[Fe(CN)6]在锌阳极上的自发还原和吸附延长锌镍电池的循环寿命

In view of the continuously worsening environmental problems, fossil fuels will not be able to support the development of human life in the future. Hence, it is of great importance to work on the efficient utilization of cleaner energy resources. In this case, cheap, reliable, and eco-friendly grid-scale energy storage systems can play a key role in optimizing our energy usage. When compared with lithium-ion and lead-acid batteries, the excellent safety, environmental benignity, and low toxicity of aqueous Zn-based batteries make them competitive in the context of large-scale energy storage. Among the various Zn-based batteries, due to a high open-circuit voltage and excellent rate performance, Zn-Ni batteries have great potential in practical applications. Nevertheless, the intrinsic obstacles associated with the use of Zn anodes in alkaline electrolytes, such as dendrite, shape change, passivation, and corrosion, limit their commercial application. Hence, we have focused our current efforts on inhibiting the corrosion and dissolution of Zn species. Based on a previous study from our research group, the failure of the Zn-Ni battery was caused by the shape change of the Zn anode, which stemmed from the dissolution of Zn and uneven current distribution on the anode. Therefore, for the current study, we selected K₃[Fe(CN)₆] as an electrolyte additive that would help minimize the corrosion and dissolution of the Zn anode. In the alkaline electrolyte, [Fe(CN)₆]^3– was reduced to [Fe(CN)₆]^4– by the metallic Zn present in the Zn-Ni battery. Owing to its low solubility in the electrolyte, K₄[Fe(CN)₆] adhered to the active Zn anode, thereby inhibiting the aggregation and corrosion of Zn. Ultimately, the shape change of the anode was effectively eliminated, which improved the cycling life of the Zn-Ni battery by more than three times (i.e., from 124 cycles to more than 423 cycles). As for capacity retention, the Zn-Ni battery with the pristine electrolyte only exhibited 40% capacity retention after 85 cycles, while the Zn-Ni battery with the modified electrolyte (i.e., containing K₃[Fe(CN)₆]) showed 72% capacity retention. Moreover, unlike conventional organic additives that increase electrode polarization, the addition of K₃[Fe(CN)₆] not only significantly reduced the charge-transfer resistance in a simplified three-electrode system, but also improved the discharge capacity and rate performance of the Zn-Ni battery. Importantly, considering that this strategy was easy to achieve and minimized additional costs, K₃[Fe(CN)₆], as an electrolyte additive with almost no negative effect, has tremendous potential in commercial Zn-Ni batteries.     

Resonance Rayleigh scattering, second-order scattering and frequency doubling scattering methods for the indirect determination of penicillin antibiotics based on the formation of Fe3[Fe(CN)6]2 nanoparticles

Under the HCl solution and heating condition, penicillin antibiotics such as amoxicillin (AMO), ampicillin (AMP), sodium cloxacillin (CLO), sodium carbenicillin (CAR) and sodium benzylpenicillin (BEN) could react with Fe(III) to produce Fe(II) which further reacted with Fe(CN)₆³⁻ to form a Fe₃[Fe(CN)₆]₂ complex. By virtue of hydrophobic force and Van der Waals force, the complex aggregated to form Fe₃[Fe(CN)₆]₂ nanoparticles with an average diameter of 45 nm. This resulted in a significant enhancement of resonance Rayleigh scattering (RRS) and non-linear scattering such as second-order scattering (SOS) and frequency doubling scattering (FDS). The increments of scattering intensity (ΔI) were directly proportional to the concentrations of the antibiotics in a certain range. The detection limits for the five penicillin antibiotics were 2.9–6.1 ng ml⁻¹ for RRS method, 4.0–6.8 ng ml⁻¹ for SOS method and 7.4–16.2 ng ml⁻¹ for FDS method, respectively. Among them, the RRS method exhibited the highest sensitivity and the AMO system was more sensitive than other antibiotics systems. Based on the above researches, a new highly sensitive and simple method for the indirect determination of penicillin antibiotics has been developed. It can be applied to the determination of penicillin antibiotics in capsule, tablet, human serum and urine samples. In this work, the spectral characteristics of absorption, RRS, SOS and FDS spectra, the optimum conditions of the reaction and the influencing factors were investigated. In addition, the reaction mechanism was discussed.     

Ferrocenyl Ionic Compounds Containing [Fe(CN)6]3– Anions: Synthesis,Characterization, and Catalytic Effects during Combustion

Twenty‐eight novel ferrocenyl ionic compounds, composed of mononuclear 1‐ferrocenylmethylalkyldimethylammoniums, 1‐ferrocenylmethyl‐3‐alkylimidazoliums, or their dinuclear analogs and [Fe(CN)₆]^3– anion, were designed and synthesized to tackle significant volatility and migration tendency of ferrocene‐based burning rate catalysts (BRCs) used currently in the composite solid propellants. The new compounds were characterized by UV/Vis, FT‐IR, and elementary analysis. The crystal structures of compounds 2· 5H₂O and 3· CH₂Cl₂ · 4H₂O verified the successful preparation of the desired ionic compounds. The TG tests at 70 °C for 24 h revealed that the new compounds exhibit lower volatility than catocene. The cyclic‐voltammetry results suggested that new compounds are quasi‐reversible or irreversible redox systems. TheTG/DSC analyses exhibited that the compounds are of highly thermal stability. Their catalytic effects on the thermal degradation of ammonium perchlorate (AP), 1,3,5‐trinitro‐1,3,5‐triazacyclohexane (RDX), and 1,3,5,7‐tetranitro‐1,3,5,7‐tetrazacyclooctane (HMX) were investigated. The results showed that most of the compounds exert great effects on the thermal degradation of AP and RDX during combustion. 11 and 2 are comparable to catocene in the thermal decomposition of AP and RDX, respectively, and can therefore be used as alternatives of catocene in a composite solid propellant. Some new compounds are unexpectedly active in promoting the thermal disintegration of HMX.     

Palladium‐catalyzed cyanation reaction of aryl halides using K4[Fe(CN)6] as non‐toxic source of cyanide under microwave irradiation

An efficient method for preparation of aryl nitriles—using [Pd{C₆H₂(CH₂CH₂ NH₂)‐(OMe)₂,3,4} (µ‐Br)]₂ complex as an efficient catalyst and K₄[Fe(CN)₆] as a green cyanide source—from aryl bromides, aryl iodides and aryl chlorides under microwave irradiation has been reported. This complex has been demonstrated to be an active and efficient catalyst for this reaction. Using a catalytic amount of this synthesized palladium complex in DMF at 130 °C led to production of the cyanoarenes in excellent yields in short reaction times. Copyright © 2010 John Wiley & Sons, Ltd.     

Ni(100)表面吸附SO2的密度泛函研究

以原子簇Ni14为模拟表面,采用DFT/B3LYP方法研究了二氧化硫(SO2)分子在Ni(100)表面的吸附构型、能量、电荷及态密度。结果表明,SO2分子通过S原子平铺吸附在Ni(100)的桥位最有利,计算结果与实验相符。电荷密度及态密度分析表明,Ni原子的d轨道与SO2分子的空p轨道之间存在明显的s-p作用和电荷转移,这一作用可能导致SO2分子发生解离。