Synthesis of natural triisopentenylated flavanone, euchrenone a2

Euchrenone a₂ (7) isolated from the roots ofEuchresta japonica has been synthesised from 3-prenylphloroacetophenone (1) by other workers. We carried out its cyclodehydrogenation with dichloro dicyano quinone (DDQ) to obtain 6-acetyl-5,7-dihydroxy-2,2-dimethylchromene (2) which was ethoxymethylated in the 7-position to give 6-acetyl-7-ethoxymethoxy-5-hydroxychromene (3). Chalcone condensation of3 and 4-ethoxymethoxy-3-C-prenylbenzaldehyde (4) gave 4,6′-bisethoxymethoxy-2′-hydroxy-6″, 6″-dimethyl-3-C-prenylpyrano (2″, 3″–4,3) chalcone (5) which cyclised with methanolic sodium acetate to give protected 5,4′-bisethoxymethoxy-6″, 6″-dimethyl-3′-C-prenylpyrano (2″, 3″–7,8) flavanone (6). Deprotection of6 with 4% methanolic HCl yielded (7) with melting point and spectral data identical to that of the natural compound.     

Spectrophotometric Study of Acid-Base Equilibrium of a Thienotriazolodiazepine,Brotizolam, Determination in Pharmaceutical Formulations

Abstract

Brotizolam is a psychotropic drug, derived from the Thieno-triazolodiazepine family, which has sedative and hypnotic properties. In this work, a spectrophotometric study has been carried out to determine the acid-base equilibrium, the pk_a value being obtained, as well as to develop a method for the determination of this compound in pharmaceutical formulations.     

Hydrothermal synthesis, characterization, and photocatalytic properties of Zn2SnO4

Nanosized Zn₂SnO₄ (ZTO) particles were successfully synthesized by a simple hydrothermal process in water/ethylene glycol mixed solution using amines (ethylamine, n-butylamine, n-hexylamine, and n-octylamine) as mineralizer. The products were characterized by X-ray diffractions (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N₂ adsorption. The results indicated that the hydrothermal conditions, such as alkaline concentration (n-butylamine), reaction temperature, solvent composition, and the kind of amines, had an important influence on the composition, crystallinity, and morphology of the product. The as-synthesized ZTO samples exhibited high activities and durabilities for photodegradation of methyl orange and the activities were mainly affected by the crystallinities of the samples. A hexagonal-shaped ZTO (H-ZTO) sample was prepared in 0.53 M of n-butylamine solution at 180 °C for 20 h and its optical properties were characterized by UV-Vis diffuse reflectance and Photoluminescence (PL) spectra. Furthermore, the photocatalytic H₂ evolution reaction from ethanol aqueous solution over H-ZTO was also investigated.     

Silica-Supported LiHSO4 as a Highly Efficient,Mild, Heterogeneous,and Reusable Catalytic System for the Solvent-Free Synthesis of Bis(indolyl)methanes

Silica-supported LiHSO₄ (LiHSO₄/SiO₂) is used as a green, cheap, and efficient catalytic system for the synthesis of bis(indolyl)methanes via the condensation of indoles with carbonyl compounds under solvent-free conditions. The reactions proceed rapidly at room temperature, and the title compounds are obtained in high to excellent yields.     

C2近邻环境对金属碳化物电子结构的影响

对一系列金属碳化物簇进行了ＤＶ－Ｘａ分子轨道计算,探讨了Ｃ２配位环境对电子结构的影响,计算结果表明,在Ｌａ６Ｃ＾１５＋２簇中,Ｌａ的５ｄ和Ｃ的２ｐ带分开,键基本上是离子性,当Ｌａ原子被Ｎｉ取代形成Ｌａ４Ｎｉ４Ｃ＾１６＋２簇之后,Ｎｉ的３ｄ和Ｃ的２Ｐ带几乎完全重叠,表明了强的Ｎｉ－Ｃ共价作用,此外,在Ｓｃ５Ｎｉ４Ｃ＾１６＋２簇中,除Ｎｉ－Ｃ和Ｃ－Ｃ共价作用外,还存在着强的金属－金属键。     

Adsorption separation of carbon dioxide,methane, and nitrogen on Hβ and Na-exchanged β-zeolite

Adsorption isotherms of carbon dioxide （CO2）, methane （CH4）, and nitrogen （N2） on Hβand sodium exchanged β-zeolite （Naβ） were volumetrically measured at 273 and 303 K. The results show that all isotherms were of Brunauer type I and well correlated with Langmuir-Freundlich model. After sodium ions exchange, the adsorption amounts of three adsorbates increased, while the increase magnitude of CO2 adsorption capacity was much higher than that of CH4 and N2. The selectivities of CO2 over CH4 and CO2 over N2 enhanced after sodium exchange. Also, the initial heat of adsorption data implied a stronger interaction of CO2 molecules with Na＋ ions in Naβ . These results can be attributed to the larger electrostatic interaction of CO2 with extraframework cations in zeolites. However, Naβ showed a decrease in the selectivity of CH4 over N2, which can be ascribed to the moderate affinity of N2 with Naβ. The variation of isosteric heats of adsorption as a function of loading indicates that the adsorption of CO2 in Naβ presents an energetically heterogeneous profile. On the contrary, the adsorption of CH4 was found to be essentially homogeneous, which suggests the dispersion interaction between CH4 and lattice oxygen atoms, and such interaction does not depend on the exchangeable cations of zeolite.     

Effect of the twisted alignment on the liquid crystal wave‐front corrector

The effect of twisted alignment on the phase modulation of a liquid crystal wave‐front corrector was investigated. First, the effect of twisted alignment is discussed in terms of the modulation principle of the liquid crystal molecule. Only partial incident light can be modulated because of the effect of the twisted alignment. Other unmodulated light will affect the correction accuracy and the resolution of the image. The blazed grating method is proposed to solve this problem. Adaptive correction was performed without the blazed grating method and the correction results are poor. A similar adaptive correction experiment was performed with the blazed grating method and a better correction result is obtained. The residual averaged wave‐front errors are PV = 0.101λ and RMS = 0.015λ and a resolvable image is obtained.     

MnO_2/NiCo_2O_4的静电自组装合成及其电化学性能

通过带负电荷的MnO2纳米片与带正电荷的Co-Ni层状双氢氧化物(LDHs)纳米片的静电自组装外加后续热处理合成了异质层状结构的MnO2/NiCo2O4复合物.采用X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱、拉曼光谱、原子吸收光谱(AAS)、场发射扫描电镜(FESEM)和透射电子显微镜(TEM)对其结构和形貌进行了表征.用循环伏安(CV)、恒流充放电和电化学交流阻抗技术对其电化学性能进行了测试.研究结果表明,该方法制得的异质复合物具有多孔层状堆垛结构,这种特殊的结构不仅增大了电解液离子的接触面积,而且还为其嵌入-脱出提供了有效途径.该复合物在1 A·g-1电流密度时,-0.6-0.45 V电位窗口内的比电容达482 F·g-1,优于纯组分MnO2和NiCo2O4的电容性能.     

On the crystal chemistry of three copper(II)-arsenates: Cu3(AsO4)2-III,Na4Cu(AsO4)2, and KCu4(AsO4)3

The three copper(II)-arsenates were synthesized under hydrothermal conditions; their crystal structures were determined by single-crystal X-ray diffraction methods:Cu₃(AsO₄)₂-III:a=5.046(2) Å,b=5.417(2) Å,c=6.354(2) Å, =70.61(2)°, =86.52(2)°, =68.43(2)°,Z=1, space group ,R=0.035 for 1674 reflections with sin / 0.90 Å^–1.Na₄Cu(AsO₄)₂:a=4.882(2) Å,b=5.870(2) Å,c=6.958(3) Å, =98.51(2)°, =90.76(2)°, =105.97(2)°,Z=1, space group ,R=0.028 for 2157 reflections with sin / 0.90 Å^–1.KCu₄(AsO₄)₃:a=12.234(5) Å,b=12.438(5) Å,c=7.307(3) Å, =118.17(2)°,Z=4, space group C2/c,R=0.029 for 1896 reflections with sin / 0.80 Å^–1.Within these three compounds the Cu atoms are square planar [4], tetragonal pyramidal [4+1], and tetragonal bipyramidal [4+2] coordinated by O atoms; an exception is the Cu(2)^[4+1] atom in Cu₃(AsO₄)₂-III: the coordination polyhedron is a representative for the transition from a tetragonal pyramid towards a trigonal bipyramid. In KCu₄(AsO₄)₃ the Cu(1)^[4]O₄ square and the As(1)O₄ tetrahedron share a common O—O edge of 2.428(5) Å, resulting in distortions of both the CuO₄ square and the AsO₄ tetrahedron. The two Na atoms in Na₄Cu(AsO₄)₂ are [6] coordinated, the K atom in KCu₄(AsO₄)₃ is [8] coordinated by O atoms.Die drei Kupfer(II)-Arsenate wurden unter Hydrothermalbedingungen gezüchtet und ihre Kristallstrukturen mittels Einkristall-Röntgenbeugungsmethoden ermittelt:Cu₃(AsO₄)₂-III:a = 5.046(2) Å,b = 5.417(2) Å,c = 6.354(2) Å, = 70.61 (2)°, = 86.52(2)°, = 68.43(2)°,Z = 1, Raumgruppe ,R = 0.035 für 1674 Reflexe mit sin / 0.90 Å^–1.Na₄Cu(AsO₄)₂:a = 4.882(2) Å,b = 5.870(2) Å,c = 6.958(3) Å, = 98.51(2)°, = 90.76(2)°, = 105.97(2)°,Z = 1, Raumgruppe ,R = 0.028 für 2157 Reflexe mit sin / 0.90 Å^–1.KCu₄(AsO₄)₃:a = 12.234(5) Å,b = 12.438(5) Å,c = 7.307(3) Å, = 118.17(2)°,Z = 4, Raumgruppe C2/c,R = 0.029 für 1896 Reflexe mit sin / 0.80 Å^–1.Die Cu-Atome in diesen drei Verbindungen sind durch O-Atome quadratisch planar [4], tetragonal pyramidal [4 + 1] und tetragonal dipyramidal [4 + 2]-koordiniert; eine Ausnahme ist das Cu(2)^{[4 + 1]}-Atom in Cu₃(AsO₄)₂-III: Das Koordinationspolyeder stellt einen Vertreter des Übergangs von einer tetragonalen Pyramide zu einer trigonalen Dipyramide dar. In KCu₄(AsO₄)₃ haben das Cu(1)^[4]O₄-Quadrat und das As(1)O₄-Tetraeder eine gemeinsame O—O-Kante von 2.428(5) Å, was eine Verzerrung der beiden Koordinationsfiguren CuO₄-Quadrat und AsO₄-Tetraeder bedingt. Die zwei Na-Atome in Na₄Cu(AsO₄)₃ sind durch O-Atome [6]-koordiniert, das K-Atom in KCu₄(AsO₄)₃ ist [8]-koordiniert.

---

Zur Kristallchemie dreier Kupfer (II)-Arsenate: Cu₃(AsO₄)₂-III, Na₄Cu(AsO₄)₂ und KCu₄(AsO₄)₃

     

Singlet-triplet energy separations in divalent five-membered cyclic conjugated C5H3X, C4H3SiX, C4H3GeX, C4H3SnX, and C4H3PbX (X = H, F, Cl, and Br)

Singlet-triplet energy gaps in cyclopenta-2,4-dienylidene, as well as its 2- or 3-halogenated derivatives, are compared and contrasted with their sila, germa, stana, and plumba analogues; at HF/6-31G* and B3LYP/ 6-311++G(3df, 2p) levels of theory. Energy gaps (ΔG_t-s), between triplet (t) and singlet (s) states, appear linearly proportional to: (i) the size of the group 14 divalent element (M = C, Si, Ge, Sn and Pb), (ii) the angle ∠C-M-C, and (iii) the ΔG_(LUMO-HOMO) of the singlet state involved. The magnitude of ΔG_t-s, for each 2- and/or 3-substituted species studied, increases with an order of: carbenes < silylenes < germylenes < stanylenes < plumbylenes. This order reverses for the barriers of the ring puckering. The puckering occurs with more ease for every singlet, compared to its corresponding triplet form.Regardless of the group 14 element (M) employed, every 3-halo-substituted species is more stable than the corresponding 2-halo-substituted isomer. For M = Pb, Sn and/or Ge; 3-halo-substituted species have higher ΔG_t-s than their corresponding 2-halo-substituted analogues. For M = Si, similar ΔG_t-s are found for 2- and 3-halogenated isomers. For M = C, 3-halo-substituted species have lower ΔG_t-s than their corresponding 2-halo-substituted analogues.Every cyclic singlet has a larger ∠C-M-C angle, than its corresponding cyclic triplet state, except for 3-halosilacyclopenta-2,4-dienylidenes where triplet has a larger ∠C-M-C angle than its corresponding singlet state.     

A Mild,Simple, Efficient,and Selective Protection of Hydroxyl Groups Using Silica-Supported Sodium Hydrogen Sulfate as a Heterogeneous Catalyst

A mild, simple, novel, and highly efficient method for the rapid protection of various primary, secondary, tertiary aliphatic alcohols, aromatic alcohols, and oximes using hexamethyldisilazane (HMDS) in the presence of silica-supported sodium hydrogen sulfate (NaHSO ₄ -SiO ₂ ), as an active, inexpensive, nontoxic, heterogeneous, and readily available catalyst under ambient conditions is described. Timethylsilyl ethers were prepared in high to excellent yields, with short reaction times under mild and almost neutral reaction conditions at room temperature.     

Direct Precipitation of Spinel-Type Zn(Fe, Ga)2O4 Solid Solutions from Aqueous Solutions at 90°C: Influence of Iron Valence of Starting Salt on Their Crystallite Growth

Spinel-type solid solutions in the whole range of compositions between ZnGa₂O₄ and ZnFe₂O₄ were directly precipitated as nanoparticles by dropping the starting mixed solutions of zinc sulfate, gallium sulfate, and either divalent iron chloride or trivalent iron nitrate into aqueous ammonia at 90°C. Direct precipitation of nanosized spinel-type Zn(Ga,Fe)O₄ solid solutions was also achieved by aging the mixed solutions in the presence of either urea or hexamethylenetetramine at 90°C except for one case (i.e., aging the solutions using trivalent iron salt in the presence of urea). With increased iron content in the spinel-type solid solution precipitates, their crystallite size decreased when trivalent iron salt was used, but increased when divalent iron salt was used. Change of lattice parameter a₀ of the spinel-type solid solutions was confirmed to follow the Vegard's Law.     

A novel germanate, Cu2Fe2Ge4O13, with a four tetrahedra oligomer

The structure of Cu₂Fe₂Ge₄O₁₃, previously thought to be CuFeGe₂O₆, has been determined from single-crystal X-ray diffraction data to be monoclinic, P2₁/m, a=12.1050(6), b=8.5073(4), c=4.8736(2) Å, β=96.145(1)°, Z=2, with R1=0.0231 and wR2=0.0605. The unique structure has an oligomer of four germanate tetrahedra, cross-linked laterally by square-planar copper ions, joined end-to-end by a zigzag chain of edge-sharing iron oxide octahedra. Running along the a-direction the metal oxide chain consists of alternating Cu-Cu and Fe-Fe dimers. A hypothetical series of homologous structures (Cu_n−2Fe₂Ge_nO_3n+1 with n=3,4,…,∞) with different length germanate oligomers is proposed, where as n increases, the infinite chain of the CuGeO₃ is approached. In this context, Cu₂Fe₂Ge₄O₁₃ is viewed as being built from blocks of CuGeO₃ and the Fe oxide chains. This material has significance to the study of low-dimensional mixed-spin systems.     

Transition metal tetramolybdate dihydrates MMo4O13·2H2O (M=Co,Ni) having a novel pillared layer structure

Hydrothermal synthesis in the M/Mo/O (M=Co,Ni) system was investigated. Novel transition metal tetramolybdate dihydrates MMo₄O₁₃·2H₂O (M=Co,Ni), having an interesting pillared layer structure, were found. The molybdates crystallize in the triclinic system with space group P−1, Z=1 with unit cell parameters of a=5.525(3) Å, b=7.058(4) Å, c=7.551(5) Å, α=90.019(10)°, β=105.230(10)°, γ=90.286(10)° for CoMo₄O₁₃·2H₂O, and a=5.508(2) Å, b=7.017(3) Å, c=7.533(3) Å, α=90.152(6)°, β=105.216(6)°, γ=90.161(6)° for NiMo₄O₁₃·2H₂O The structure is composed of two-dimensional molybdenum-oxide (2D Mo-O) sheets pillared with CoO₆ octahedra. The 2D Mo-O sheet is made up of infinite straight ribbons built up by corner-sharing of four molybdenum octahedra (two MoO₆ and two MoO₅OH₂) sharing edges. These infinite ribbons are similar to the straight ones in triclinic-K₂Mo₄O₁₃ having 1D chain structure, but are linked one after another by corner-sharing to form a 2D sheet structure, like the twisted ribbons in BaMo₄O₁₃·2H₂O (or in orthorhombic-K₂Mo₄O₁₃) are.     

The relationship among pKa, pH, and binding constants in the interactions between boronic acids and diols—it is not as simple as it appears

In our continuing efforts into designing boronic acid-based sensors that recognize cell-surface carbohydrates, it has been necessary to examine various factors that affect the binding affinity between a boronic acid moiety and a diol. The current prevailing view is that the strongest boronic acid/diol complexes are generated by a combination of high solution pH and a low boronic acid pK_a. However, there has never been a systematic examination of the relationship among the binding constants, boronic acid pK_a, and the pH of the solution. Herein we report our findings with a series of 25 arylboronic acids with various substituents and their binding affinities with diols. We have found that (1) the relationship between the pK_a of monosubstituted phenylboronic acid and its substituents can be described using a Hammet plot; (2) the optimal pH for binding is not always above the pK_a of the boronic acid, and is affected by the pK_a values of the boronic acid and the diol, and other unknown factors; and (3) the general belief that boronic acids with lower pK_a values show greater binding affinities for diols is not always true.     

Synthesis,characterization of SiO2 supported-industrial phosphoric acid catalyst for hydrolysis of NaBH4 solution

Abstract

Tunisian industrial phosphoric acid H₃PO₄ was supported on silica gel SiO₂ (SIPA) to catalyze the hydrolysis reaction of aqueous alkaline sodium borohydride (NaBH₄). The SiO₂ was produced from purified quartz sand using alkali fusion-acidification chemical process. The BET surface area results indicate that the prepared silica gel could reach a specific surface area up to 585 m²/g. The addition of PO₃H₂ functional groups resulted in an increase of surface acidity of SiO₂ catalyst as shown by FT-IR and DTA-DTG spectra. The total acidity of SIPA catalyst was determined by titration to be 2.8?mmol H⁺/g. SEM/EDS maps reveal the distribution of heavy metals on the silica surface. The effect of supported PO₃H₂ functional groups and heavy metals on the NaBH₄ hydrolysis reaction was studied for different ratios of SIPA catalyst to NaBH₄. The sample 12SIPA/NaBH₄ leads to a very high hydrogen generation rate (up to 90%). The activation energy of hydrogen generation by NaBH₄ hydrolysis was 25.7?kJ mol^?1.     

Adsorption separation of carbon dioxide, methane and nitrogen on monoethanol amine modified B-zeolite

A new type of composite adsorbents was synthesized by incorporating monoethanol amine (MEA) into β-zeolite. The parent and MEA-functionalized β-zeolites were characterized by X-ray diffraction (XRD), N₂ adsorption, and thermogravimetric analysis (TGA). The adsorption behavior of carbon dioxide (CO₂), methane (CH₄), and nitrogen (N₂) on these adsorbents was investigated at 303 K. The results show that the structure of zeolite was well preserved after MEA modification. In comparison with CH₄ and N₂, CO₂ was preferentially adsorbed on the adsorbents investigated. The introduction of MEA significantly improved the selectivity of both CO₂/CH₄ and CO₂/N₂, the optimal selectivity of CO₂/CH₄ can reach 7.70 on 40 wt% of MEA-functionalized β-zeolite (MEA(40)-β) at 1 atm. It is worth noticing that a very high selectivity of CO₂/N₂ of 25.67 was obtained on MEA(40)-β. Steric effect and chemical adsorbate-adsorbent interaction were responsible for such high adsorption selectivity of CO₂. The present MEA-functionalized β-zeolite adsorbents may be a good candidate for applications in flue gas separation, as well as natural gas and landfill gas purifications.     

尖晶石型LiMn2-xInxO4(x=0，0.01，0.02，0.05)的合成及电化学性能研究

以醋酸锰、氢氧化锂和三氧化二铟为原料,以柠檬酸为配位剂,采用溶胶-凝胶法制备了掺杂In的尖晶石LiMn2-xInxO4(x=0,0.01,0.02,0.05),采用XRD、SEM对目标材料进行了结构和形貌表征,采用恒流充放电、循环伏安(CV)以及交流阻抗(EIS)谱测试对材料进行了电化学性能表征,考察了不同In掺杂量对材料性能的影响。结果表明,当In掺杂量为1%时,LiMn1.99In0.01O4样品具有纯的尖晶石锰酸锂结构,在0.5C和3.4～4.35 V电压范围条件下,LiMn1.99In0.01O4的初始放电容量为119.9 mAh.g-1,经过1C 30次,2C 30次,再0.5C 5次循环后,其放电容量保持率为84.9%,显示了良好的电化学性能。掺杂1%的In的样品比未掺杂的样品具有更优的高温循环稳定性能。     

Vapour-liquid equilibrium measurements for binary mixtures of R32, R143a, R134a and R125 with a perfluoropolyether lubricant

In the present work, vapour-liquid equilibria of four binary systems refrigerant-lubricant oil have been investigated, CF₃CHF₂ (R125), CF₃CH₂F (R134a), CF₃CH₃ (R143a) and CH₂F₂ (R32) as refrigerants and a commercial perfluoropolyether (PFPE), Fluorolink D10H, as lubricant. Vapour-liquid equilibrium data, consisting of isothermal measurement of equilibrium pressure at a fixed composition, have been correlated with an extended Flory-Huggins equation and the corresponding parameters have been determined. Good agreement has been found between experimental data and the model predictions.     

A novel multi-component reaction of indole, formaldehyde, and tertiary aromatic amines

A novel multi-component reaction of indoles, formaldehydes, and tertiary aromatic amines is described for the synthesis of dialkylaminoarylated indoles using silica-supported perchloric acid (HClO₄-SiO₂) as an inexpensive and highly efficient catalyst. The key features of this multi-component reactions are operational simplicity, mild reaction conditions, regioselectivity, and recycling of catalyst.