Poly(ethylene imine) hybrids containing polyhedral oligomeric silsesquioxanes: Preparation, structure and properties

Both octaglycidyletherpropyl polyhedral oligomeric silsesquioxane and hepta(3,3,3-trifluoropropyl)glycidyletherpropyl polyhedral oligomeric silsesquioxane were synthesized via the hydrosilylation reactions between octahydrosilsesquioxane [and/or hepta(3,3,3-trifluoropropyl)hydrosilsesquioxane] and allyl glycidyl ether. The polyhedral oligomeric silsesquioxane (POSS) macromers were characterized by means of Fourier transform infrared and nuclear magnetic resonance spectroscopy. The inter-component macromolecular reactions between the POSS macromers and poly(ethylene imine) (PEI) were employed to prepare the POSS-containing organic-inorganic PEI hybrids. The inclusion of octaglycidyletherpropyl POSS into PEI results in the formation of the organic-inorganic hybrid networks whereas the introducing hepta(3,3,3-trifluoropropyl)glycidyletherpropyl POSS to PEI affords the linear POSS-grafted PEI copolymers. Differential scanning calorimetry and thermogravimetric analysis show that the POSS-containing PEI hybrids displayed increased glass transition temperatures (T_g’s) and enhanced thermal stability compared to the plain PEI. These PEI hybrid composites can be significantly swollen with water without dissolving, suggesting the formation of hydrogels. The PEI hydrogels containing octaglycidyletherpropyl POSS is in reality the chemically-crosslinked hydrogels whereas the those containing hepta(3,3,3-trifluoropropyl)glycidyletherpropyl POSS displayed the behavior of physical hydrogels. The formation of physical hydrogels is ascribed to the microphase-separated morphology in the hybrids. In addition, the hybrids containing hepta(3,3,3-trifluoropropyl)glycidyletherpropyl POSS exhibited the typical amphiphilicity as evidenced by the increase in surface hydrophobilicity.     

Preparation and properties of propylene/POSS copolymer with rac-Et(Ind)2ZrCl2 catalyst

An organic-inorganic hybrid copolymer was prepared by using a C₂ symmetric ansa-metallocene catalyst in conjunction with modified methylaluminoxane (MMAO). Two kinds of monovinyl substituted polyhedral oligomeric silsesquioxane (POSS) monomers were used to copolymerize with propylene. A special experiment was carried out in order to confirm the purification of the copolymerization products. The unreacted monomer was completely removed by washing with an n-hexane/ethanol mixture. Thermal properties of the propylene/POSS copolymers exhibited improved thermal stability with higher degradation temperature and char yields, demonstrating that the inclusion of inorganic POSS nanoparticles made the organic polymer matrix more thermally robust.     

Organic/inorganic hybrid star-shaped block copolymers of poly(l-lactide) and poly(N-isopropylacrylamide) with a polyhedral oligomeric silsesquioxane core: Synthesis and self-assembly

The star-shaped organic/inorganic hybrid poly(l-lactide) (PLLA) based on polyhedral oligomeric silsesquioxane (POSS) was prepared using octa(3-hydroxypropyl) polyhedral oligomeric silsesquioxane as initiator via ring-opening polymerization (ROP) of l-lactide (LLA). The molecular weight of POSS-containing star-shaped hybrid PLLA (POSSPLLA) can be well controlled by the feed ratio of LLA to initiator. The POSSPLLA was further functionalized into the macromolecular reversible addition-fragmentation transfer (RAFT) agent for the polymerization of N-isopropylacrylamide (NIPAM), leading to the POSS-containing star-shaped organic/inorganic hybrid amphiphilic block copolymers, poly(l-lactide)–block–poly(N-isopropylacrylamide) (POSS(PLLA–b–PNIPAM)). The self-assembly behavior of POSS(PLLA–b–PNIPAM) block copolymers in aqueous solution was investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM) and atomic force microscopy (AFM). DLS showed the PNIPAM block in the aggregates is temperature-responsive and its phase-transition is reversible. TEM proved that the star-shaped POSS(PLLA–b–PNIPAM) amphiphilic block copolymers can self-assemble into the vesicles in aqueous solution. The vesicular wall and coronas are composed of the hydrophobic POSS core and PLLA, and hydrophilic PNIPAM blocks, respectively. Therefore, POSSPLLA and POSS(PLLA–b–PNIPAM) block copolymers, as a class of novel organic–inorganic hybrid materials with the advantageous properties, can be potentially used in biological and medical fields.     

Preparation,characterization, and properties of nanofibers based on poly(vinylidene fluoride) and polyhedral oligomeric silsesquioxane

Nanostructered nanofibers based on poly(vinylidene fluoride) (PVDF) and polyhedral oligomeric silsesquioxane (POSS) have been prepared by electrospinning process. The starting solutions were prepared by dissolving both the system components in the mixture N,N‐dimethylacetamide/acetone. The characteristics of the fiber prepared, studied by scanning electron microscopy, atomic force microscopy, and wide angle X‐ray diffraction, have been compared with those of PVDF fibers. Morphological characterization has demonstrated the possibility to obtain defect‐free PVDF/POSS nanofibers by properly choosing the electrospinning conditions, such as voltage, polymer concentration, humidity, etc. Conversely, in the case of fibers based on the neat polymer, it was not possible to attain the complete elimination of beads in the electrospun nanofibers. The different behavior of the two types of solutions has been ascribed to silsesquioxane molecules, which, without influencing the solution viscosity or conductivity, favor the formation of uniform structures by decreasing the system surface tension. Concerning POSS distribution in the fibers, the morphological characterization of the electrospun films has shown a submicrometric dispersion of the silsesquioxane. It is relevant to underline that cast films, prepared by the same solutions, have been found to be characterized by POSS aggregation, thus demonstrating a scarce affinity between the two‐system components. Indeed, the peculiar solvent evaporation of the electrospun solution, which is much faster than that occurring during the cast process, prevents POSS aggregation, thus leading to the formation of nanofibers characterized by a silsesquioxane dispersion similar to that present in solution. Finally, the presence of POSS improves the electrospun film mechanical properties. Copyright © 2011 John Wiley & Sons, Ltd.     

The Special “Morse Code” between Solvent Polarity and Morphology Flexibility in a POSS–Dendrimer Supramolecular System

An amazing phenomenon of the relative magnitude of modulus of two liquid-crystal (LC) gels is found inverted under/above their phase transition temperature T_LC-iso, which is further proved to be caused by their diverse morphology flexibility. By testing the polarity of two LCs, gelator POSS-G1-Boc (POSS=polyhedral oligomeric silsesquioxane) was discovered to self-assemble into more flexible structures in a relatively low polar LC, whereas more rigid ones are formed in higher polar LC. Hence, a fitting function to connect morphology flexibility with solvent polarity was established, which can even be generalized to a number of common solvents. Experimental observations and coarse-grained molecular dynamics simulations revealed that solvent polarity mirrors a “Morse code”, with each “code” corresponding to a specific morphology flexibility.     

Facile and quick synthesis of poly(N‐methylolacrylamide)/polyhedral oligomeric silsesquioxane graft copolymer hybrids via frontal polymerization

We report on a new strategy for fabricating well‐defined POSS‐based polymeric materials with and without solvent by frontal polymerization (FP) at ambient pressure. First, we functionalize polyhedral oligomeric silsesquioxane (POSS) with isophorone diisocyanate (IPDI). With these functionalized POSS‐containing isocyanate groups, POSS can be easily incorporated into a poly(N‐methylolacrylamide) (PNMA) matrix via FP in situ. Constant velocity FP is observed without significant bulk polymerization. The morphology and thermal properties of POSS‐based hybrid polymers prepared via FP are comparatively investigated on the basis of scanning electronic microscopy (SEM) and thermogravimetric analysis (TGA). Results show that the as‐prepared POSS‐based polymeric materials exhibit a higher glass transition temperature than that of pure PNMA, ascribing to modified POSS well‐dispersed in these hybrid polymers. Also, the products with different microstructures display different thermal properties. The pure PNMA exhibits a featureless morphology, whereas a hierarchical morphology is obtained for the POSS‐based polymeric materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1136–1147, 2009     

Preparation of carboxyl‐functionalized polyhedral oligomeric silsesquioxane by a structural transformation reaction from soluble rod‐like polysilsesquioxane

Carboxyl‐functionalized polyhedral oligomeric silsesquioxane (SQ; POSS‐COOH ) was successfully prepared by a structural transformation reaction, that is, a process of heating and concentrating soluble carboxyl‐functionalized rod‐like polySQ (PolySQ ‐COOH ) using the aqueous superacid trifluoromethanesulfonic acid (HOTf) as the catalyst and solvent. The obtained POSS‐COOH was a mixture of a cage‐like decamer (T₁₀‐POSS), which was the main product, and an octamer (T₈‐POSS) and a dodecamer (T₁₂‐POSS), which were the minor products. The product obtained by heating and concentrating PolySQ‐COOH using aqueous hydrochloric acid (HCl) as the catalyst and solvent was soluble polySQ rather than POSS. For comparison, heating and concentrating POSS‐COOH in aqueous HOTf and HCl were performed, which yielded POSS‐COOH and PolySQ‐COOH , respectively. Based on these results, the process of heating and concentrating each starting material ( PolySQ‐COOH and POSS‐COOH ) in aqueous HOTf afforded POSS‐COOH , and a similar process in aqueous HCl yielded PolySQ‐COOH . © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2511–2518     

Effect of POSS on morphology and properties of poly(2,6-dimethyl-1,4-phenylene oxide)/polyamide 6 blends

Poly(2,6-dimethyl-1,4-phenylene oxide)/polyamide 6 (PPO/PA6) (50/50 w) blends filled with epoxycyclohexyl polyhedral oligomeric silsesquioxane (POSS) were prepared via melt-mixing. The reactions between POSS and PPO/PA6 blends were studied by Fourier transform infrared spectroscopy, end group and gel content tests. The morphology of PPO/PA6/POSS composites was observed by field emission scanning electron microscope and transmission electron microscope. As a chain extender and a crosslinking agent for PA6, POSS largely affected the morphology of the composites, which was mainly dependent on the melt-viscosity ratio and interfacial tension between the components. With increasing POSS content from 2 to 4 phr, the morphology of the composites transformed from droplet/matrix to co-continuous morphology. The PPO/PA6/POSS composites with co-continuous morphology had the better mechanical properties than those with droplet/matrix morphology. Dynamic mechanical thermal analysis showed that the addition of POSS increased the T_g of PA6.     

Improving Damping Properties and Thermal Stability of Epoxy/Polyurethane Grafted Copolymer by Adding Glycidyl POSS

Modified castor oil-based epoxy resin (EP)/polyurethane (PU) grafted copolymer by glycidyl polyhedral oligomeric silsesquioxane (glycidyl POSS) was synthesized. The damping properties, thermal stability, mechanical properties and morphology of the grafted copolymer modified by glycidyl POSS were studied systematically. The results revealed that the incorporation of glycidyl POSS improved the damping performance evidently and broadened damping temperature range, especially when the glycidyl POSS content was0.2%–1%. At the same time, there was a slight increase in thermal stability with the increase of POSS content. The tensile properties changed with the change of the copolymer's Tg, decreased at low POSS contents and increased at high POSS contents. This modified copolymer has the potential to be used as film damping material or constrained damping layer.     

Synthesis and self‐assembly of thermotropic block copolymer with long alkyl tethered cage silsesquioxane in the side chain

Thermotropic POSS‐containing poly(methacrylate) with long alkyl chain tethered polyhedral oligomeric silsesquioxane (POSS) in the side chain and the block copolymers (PMMA‐b‐PMAC11POSS) were developed by through living anionic polymerization. The resulting polymers indicated a phase transition temperature at 112 °C from spherocrystal to isotropic phase. The POSS‐containing polymer segments tended to form matrix of microphase‐separated nanostructures in the bulk even in the very low volume fraction, for instance, PMMA cylindrical nanostructure was obtained by PMMA₁₇₅‐b‐PMAC11POSS₁₁ (?_PMAC11POSS = 0.44). The control of thin film morphology was carried out by not only solvent annealing, but also thermal annealing, resulting in the formation of well‐ordered dot‐ and fingerprint‐type nanostructures. This is the first report in a series of POSS‐containing block polymers that are capable for thermal annealing to generate well‐ordered microphase‐separated nanostructures in thin films. The novel thermotropic POSS‐containing block copolymer offers a promising material for block copolymer lithography. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Efficient Photocatalytic Cleavage of Lignin Models by a Soluble Perylene Diimide/Carbon Nitride S-Scheme Heterojunction

3,4,9,10-Perylenetetracarboxylic dianhydride (PDI) is one of the best n-type organic semiconductors and an ideal light-driven catalyst for lignin depolymerization. However, the charge localization effect and the excessively strong intermolecular aggregation trend in PDI result in rapid electron-hole (e⁻−h⁺) recombination, which limits photocatalytic performance. Herein, polymeric carbon nitride/polyhedral oligomeric silsesquioxane PDI (p-CN/P-PDI) S-scheme heterojunction photocatalyst was prepared by the solvent evaporation-deposition method for C−C bond selective cleavage of lignin β-O-4 model. Based on the material characterization results, the synergic role of polyhedral oligomeric silsesquioxane (POSS) and S-scheme heterojunction maintains appropriate aggregation domains, achieves better solar light utilization, faster charge-transfer efficiency, and greater redox capacity. Notably, the 3 % p-CN/P-PDI heterostructure exhibits a remarkable enhancement in cleavage conversion efficiency, achieving approximately 16.42 and 2.57 times higher conversion rates compared to polyhedral oligomeric silsesquioxane modified PDI (POSS-PDI) and polymeric carbon nitride (p-CN), respectively.     

Self-assembly of aniline oligomers in aqueous medium

By dissolving branched or linear aniline oligomers in polar solvent and introducing their stock solution into an aqueous acidic medium, sheet-like as well as wire-like supramolecular structures with well-defined morphology were obtained, respectively. These oligomeric supramolecular structures were constructed via a post-synthetic precipitation process, indicating that aniline oligomers are capable of self-assembling in an aqueous medium, which is similar to the reaction medium of aniline chemical polymerization. Possible formation mechanisms of these supramolecular structures were proposed, i.e., sheet-like products were probably constructed by collapsed molecular chains of aniline oligomers with branched units through π–π stacking and hydrogen bonding, whereas formation of the wire-like products was attributed to “oriented-attachment” of collapsed molecular chains of linear aniline oligomers. The findings obtained in this study are supposed to provide useful clues for uncovering the formation mechanism of polyaniline micro-/nanostructures.     

倍半硅氧烷改性环氧树脂的研究进展

倍半硅氧烷是近年发展起来的一种分子水平的有机无机杂化材料。文章介绍了倍半硅氧烷的结构、合成以及笼型倍半硅氧烷（POSS）基高分子复合材料的结构及合成方法。倍半硅氧烷改性聚合物可以提高聚合物的热性能、阻燃性能和物理机械性能等。文章综述了倍半硅氧烷改性环氧树脂的研究进展。     

Inorganic–organic nanocomposites of polybenzoxazine with octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane

Octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane (OpePOSS) was used to prepare the polybenzoxazine (PBA‐a) nanocomposites containing polyhedral oligomeric silsesquioxane (POSS). The crosslinking reactions involved with the formation of the organic–inorganic networks can be divided into the two types: (1) the ring‐opening polymerization of benzoxazine and (2) the subsequent reaction between the in situ formed phenolic hydroxyls of PBA‐a and the epoxide groups of OpePOSS. The morphology of the nanocomposites was investigated by means of scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. Differential scanning calorimetry and dynamic mechanical analysis showed that the nanocomposites displayed higher glass‐transition temperatures than the control PBA‐a. In the glassy state, the nanocomposites containing less than 30 wt % POSS displayed an enhanced storage modulus, whereas the storage moduli of the nanocomposites containing more than 30 wt % POSS were lower than that of the control PBA‐a. The dynamic mechanical analysis results showed that all the nanocomposites exhibited enhanced storage moduli in the rubbery states, which was ascribed to the two major factors, that is, the nanoreinforcement effect of POSS cages and the additional crosslinking degree resulting from the intercomponent reactions between PBA‐a and OpePOSS. Thermogravimetric analysis indicated that the nanocomposites displayed improved thermal stability. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1168–1181, 2006     

Blends of amphiphilic poly(dimethylsiloxane) and nonamphiphilic octaisobutyl-POSS at the air/water interface

Brewster angle microscopy (BAM) shows that a nonamphiphilic polyhedral oligomeric silsesquioxane (POSS) nanofiller, octaisobutyl-POSS, forms aggregates at all surface concentrations at the air/water interface. When amphiphilic poly(dimethylsiloxane) (PDMS) is blended with the octaisobutyl-POSS (>10 wt % PDMS), the degree of POSS aggregation dramatically decreases. Thermodynamic analyses and morphology studies through surface pressure-area per monomer isotherm data and BAM, respectively, exhibit three distinct composition regimes: (1) Blends with >70 wt % POSS have unstable isotherms whose shapes deviate from those of PDMS and form large rigid domains comparable to but smaller than pure, octaisobutyl-POSS films. (2) At compositions between approximately 40 and 70 wt % POSS, the isotherms' features are qualitatively similar to those of pure PDMS, and extensive nanofiller "networks" are observed by BAM. (3) For compositions < or = approximately 30 wt % POSS, the isotherms are essentially those of pure PDMS with small POSS domains dispersed in the PDMS matrix. These results provide further insight into nanofiller aggregation mechanisms and dispersion that may be present in thicker films and bulk systems.     

POSS基杂化含氟丙烯酸酯共聚物涂膜的表面相分离与疏水性研究

采用自由基溶液聚合法成功合成了多面体低聚倍半硅氧烷(POSS)基杂化含氟丙烯酸酯共聚物,并采用核磁共振仪(NMR)和凝胶渗透色谱仪(GPC)表征了共聚物,其中POSS和含氟单体分步加入到反应中.首先将共聚物溶解到三氟三氯乙烷(F113)和乙酸乙酯的混合溶剂中配制成溶液,然后通过直接在玻璃片上滴落共聚物溶液制备了共聚物涂膜.采用扫描电子显微镜(SEM)、X-射线光电子能谱(XPS)、原子力显微镜(AFM)和接触角测量仪考察了F113和乙酸乙酯的配比对共聚物涂膜表面形貌、表面元素组成、表面粗糙度以及表面疏水性的影响.实验数据表明POSS在表面能够聚集成纳米颗粒并能极大增强涂膜表面粗糙度和疏水性.共聚物表面同时存在POSS聚集与有机相微相分离两类相分离行为,并形成了复合粗糙结构.虽然POSS和含氟段竞争迁移到表面,但是随着混合溶剂中F113的增多,涂膜表面含氟量越来越多,同时POSS在表面的聚集体越来越少,表面平均粗糙度越来越小,最终涂膜的疏水性越来越强,这说明F113有助于提升氟的趋表迁移能力,使涂膜表面含氟链段占据较多的表面空间,从而抑制了POSS在表面聚集分布.当使用纯F113作为溶剂时,共聚物涂膜的表面氟含量为45.25%,平均粗糙度为93.4 nm,此时静态水接触角最大为135.0?,表现出优异的疏水性.     

Flame retardancy of epoxy resin nanocomposite with a novel polymeric nanoflame retardant

A wrapped nanoflame retardant, designated as polyhedral oligomeric silsesquioxane (POSS)‐poly(4‐bromostyrene) (PBS)‐carbon nanotubes (CNTs), was synthesized via π‐π stacking interactions between the walls of multiwalled carbon nanotubes and the silicon‐bromine containing hybrid copolymer (designated as POSS‐PBS) that was copolymerized by 4‐bromostyrene and acryloyloxyisobutyl polyhedral oligomeric silsesquioxane. The POSS‐PBS‐CNTs exhibited good dispersibility in epoxy resin (EP) without obvious aggregation. Furthermore, the fire behaviors of this flame‐retardant EP (FR‐EP) nanocomposites were examined via limited oxygen index (LOI) and cone calorimeter (CONE) tests. The FR‐EP had an ideal LOI value of 35.3% and its residual char yield obtained from CONE test was significantly enhanced from 5.9% to 15.3% with the incorporation of 4 wt% POSS‐PBS‐CNTs and 1.33 wt% Sb₂O₃ into EP matrix. Additionally, the addition of 4 wt% POSS‐PBS‐CNTs or POSS‐PBS can efficiently decrease the peak heat release rate (PHRR) of EP matrix by 41.0% or 45.6%, respectively.     

Self-constructed stable liquid crystal alignment in a monomer-liquid crystal mixture system

Here, we demonstrate excellent liquid crystal (LC) vertical alignment without using an alignment layer printing process by introducing octadecyltrichlorosilane (OTS) into the LC mixture. Further, we investigated the alignment mechanism by analysing the surfaces of the substrates. The optimum concentration of OTS was found to be about 0.03 wt%, which is 1/100 of that in the previously reported polyhedral oligomeric silsesquioxane (POSS)–LC system. Moreover, the OTS–LC system exhibited a more stable LC alignment compared with the POSS–LC system. These differences may arise from the different strengths of surface–dopant interactions; that is, the covalent bond in the OTS–LC system and the van der Waals interactions in the POSS–LC system. We also demonstrated that the method can be used in a capillary tube, which may serve as a new method facilitating the application of LCs with curved surfaces.     

Blends of amphiphilic trisilanolisobutyl-POSS and phosphine oxide substituted poly(dimethylsiloxane) at the air/water interface

Mixtures of a polyhedral oligomeric silsesquioxane, trisilanolisobutyl-POSS, and a polar silicone, poly(dimethyl-co-methylvinyl-co-methyl, 2-diphenyl phosphine oxide ethyl) siloxane (PDMS-PO), spread as Langmuir monolayers at the air/water interface are used to examine the surface phase behavior and aggregation of trisilanolisobutyl-POSS as a function of silicone composition. Analyses of the surface pressure-area per monomer (Pi-A) isotherms in terms of the collapse pressures and excess Gibbs free energies of mixing indicate the monolayers form slightly negative deviation mixtures. Direct observations of surface morphology with Brewster angle microscopy in the collapsed regime reveal that the governing factor for aggregation is the collapse Pi of the component with a stronger affinity for water. In trisilanolisobutyl-POSS/PDMS-PO blends, POSS aggregates as discrete domains and does not coalesce into larger aggregates or networklike structures for <80 wt % POSS, a feature that is vastly different from a previous study of POSS blended with regular poly(dimethylsiloxane).     

On novel bio-hybrid system based on PLA and POSS

In this work, a novel strategy for the preparation of bio-hybrid systems based on polylactic acid (PLA) and polyhedral oligomeric silsesquioxane (POSS) was developed. Indeed, the new method consists in a preliminary functionalization of the polymer matrix and a subsequent reaction of silsesquioxane molecules, characterized by amino or hydroxyl functionalities, potentially capable of reacting with maleic anhydride groups created onto PLA by a free radical process. The method adopted to create maleic anhydride-grafted polylactic acid (PLA-g-MA) allowed to graft 0.7 wt% of MA onto the polymer backbone, avoiding a dramatic reduction of PLA molecular mass. ¹H-NMR measurements demonstrated a different reactivity of the two used POSS, namely trans-cyclohexanediolisobutyl POSS (POSS-OH) and aminopropyl heptaisobutyl POSS (POSS-NH₂). Indeed, the amino group of POSS-NH₂ was found to react with the maleic anhydride group of PLA-g-MA allowing to obtain a hybrid system, carrying silsesquioxane molecules along the polymer backbone while the reactivity of POSS-OH turned out to be much lower. Thermal properties of the synthesized hybrid systems were assessed by means of DSC measurements. Indeed, the presence of POSS grafted onto the macromolecular chain was found to improve PLA crystallinity, by affecting the crystal nucleation density. Moreover, a decrease of surface water wettability was observed in the films made of PLA-g-MA/POSS-NH₂.