Comparative study on the interaction of DNA with three different kinds of surfactants and the formation of multilayer films

The interactions between double-stranded DNA (dsDNA) and three different kinds of surfactants, i.e., cationic, anionic, and nonionic surfactants, were investigated by cyclic voltammetry, electrochemical impedance spectroscopy and UV-vis spectroscopy. Multilayer films composed of DNA and surfactants were prepared at gold electrode by electrostatic or hydrophobic interactions. It was found that the cationic surfactant, CTAB, can bind to DNA by electrostatic interaction, and the electron transfer resistance of CTAB-DNA complex film increases first and then decreases with CTAB concentration. The anionic surfactant, LAS, can bind to DNA but by hydrophobic interaction, and the electron transfer resistance of the complex film keeps decreasing with LAS concentration. Nonionic surfactants can also directly bind to DNA by hydrophobic interaction. All the three different kinds of surfactants can form multilayer films with DNA on the electrode surface. The chemical structure of DNA keeps unchanged during interacting with these surfactants. The binding modes of DNA with these three different kinds of surfactants were also deduced.     

Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

The interplay of hydrophobic and electrostatic effects in the surfactant-induced aggregation/deaggregation of chlorin p6

The aggregation/deaggregation of chlorin p6 with the surfactants CTAB, SDS, and TX 100 have been studied by using absorption, fluorescence, and light scattering techniques. The ionic surfactants are found to cause aggregation of fluorophore at submicellar concentrations. The aggregates dissolve at higher surfactant concentrations to yield micellized monomers. This is rationalized by the interplay of electrostatic and hydrophobic effects. A prominent pH effect is observed in the ionic surfactant induced aggregation process as the charge on the fluorophore is controlled by the pH of the medium. Interestingly, the neutral TX-100 also induces aggregation of chlorin p6 at low concentrations, indicating that hydrophobic effects by themselves can cause aggregation unless there is a hindrance by repulsive electrostatic effects.     

Organization of amphiphiles: XII. Evidence in favor of formation of hydrophobic complexes in aqueous solution

The effects of nonionic surfactants OP-10 and OP-30 (polyoxyethylated octyl phenols with 10 and 30 oxyethylene groups, respectively) in surfactant mixtures with ionic surfactants hexadecyltrimethylammonium bromide (CTAB) and sodium dodecyl sulphate (SDS) have been investigated by a conductometric method in conjunction with fluorescence, surface tension, zeta potential, and DLS measurements. The interactions are found to be antagonistic in nature for each of the systems; i.e., micellization of CTAB as well as SDS is hindered on addition of the nonionic surfactants. The antagonism is found to be more prominent in the presence of OP-10 compared to that of OP-30. Two types of mechanistic paths, path A operating below the critical micellar concentration and path B operating beyond the critical micellar concentration of nonionic surfactants, have been suggested. In path A, the retardation in micellization has been attributed to a decrease in monomeric concentration of the ionic surfactants from solution as a result of the formation of a hydrophobic complex between nonionic and ionic surfactants. In path B, the decrease in monomer concentration is due to the solubilization of the ionic surfactant in micelles of the nonionic surfactants in a 1:1 stoichiometric ratio. A theoretical treatment to the interaction in each ionic-nonionic pair yields a positive value of the interaction parameter supporting the concept of antagonism. The formation of the hydrophobic complex is supported by fluorescence and surface tension measurements. A schematic representation of the stabilization of these hydrophobic complexes has been suggested. The association of ionic surfactants by nonionic micelles is suggested by zeta potential and DLS studies.     

Interaction between silicates and ionic surfactants in dilute solution

Understanding the interaction between silicate ions and surfactants is critical for the design and development of mesoporous siliceous materials. We examined the interaction between sodium silicate ions and three different cationic surfactants [namely, cetyltrimethylammonium bromide (CTAB), tetradecyltrimethylammonium bromide (TTAB), and dodecyltrimethylammonium bromide (DTAB)] and an anionic surfactant [sodium dodecyl sulfate (SDS)] in dilute solution at room temperature. From the combination of several techniques, such as conductometric and potentiometric titrations, dynamic light scattering, and isothermal titration calorimetry, the phase behavior of the sodium silicate and CTAB system was determined. We observed that the aggregation behavior of the silicate-CTAB system is similar to that of a polymer-surfactant system. The formation of the silicate-CTAB complex is induced by the adsorption of SiOH and SiO- groups, aided by CTAB unimers. The electrostatic attraction and hydrophobic interaction are the dominant forces controlling the formation of silicate-CTAB complexes. When these complexes are saturated with CTAB unimers, free CTAB micelles are then produced. TEM micrographs revealed that a stable Si-O-Si network is absent within the silicate-CTAB complexes, and surprisingly, stable silicate-CTAB complexes with ordered structure were observed. The present finding is important for understanding the interaction between silicate and surfactant in the synthesis of mesoporous structure in the dilute solution regime.     

Interactions between Hydrophobically Modified Associating Polyacrylamide and Cationic Surfactant at the Water‐Octane Interface: Interfacial Dilational Viscoelasticity and Relaxation Processes

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2‐ethylhexyl acrylate (EHA) (<1.0 mol%) with a hydrolyzed degree of about 1.5–2.0% at the octane‐water interfaces were investigated by means of two methods: the interfacial tension response to sinusoidal area variations (oscillating barriers method) and the relaxation of an applied stress (interfacial tension relaxation method) respectively. The influence of cationic surfactant cetyl trimethylammonium bromide (CTAB) on the dilational viscoelastic properties was studied. The results obtained by oscillating barriers method showed that dilational modulus decreased moderately with the increase of CTAB concentration. The results obtained by interfacial tension relaxation measurements showed that two main relaxation processes exist in the interface at 7,000 ppm polymer concentration: one is the fast process involving the exchange of hydrophobic blocks between the proximal region and distal region in the interface; the other is the slow relaxation process involving conformational changes of polymer chain in the interface. By adding CTAB, the slow process changed obviously due to the strong electrostatic interaction between oppositely charged surfactant and hydrolyzed part of polymer chain. Only when the CTAB concentration was close to the “equal charge point,” the associations formed mainly by the hydrophobic interaction like that in SDS/polymer system appeared and the characteristic time of fast process decreased obviously. The information of relaxation processes obtained from interfacial tension relaxation measurements can explain the results from dilational viscoelasticity measurements very well.     

Effect of Molecular Weight on the Interfacial Dilational Viscoelasticity of Anionic Polyelectrolyte/Surfactant Systems

In this article, the effect of molecular weight on the interfacial tension and interfacial dilational viscoelasticity of polystyrene sulfonate/surfactant adsorption films at the water-octane interface have been studied by spinning drop method and oscillating barriers method respectively. The experimental results show that different interfacial behaviors can be observed in different type of polyelectrolyte/surfactant systems. PSS/cationic surfactant CTAB systems show the classical behavior of oppositely charged polyelectrolyte/surfactant systems and can be well explained by electrostatic interaction. Molecular weight of PSS plays a crucial role in the nature of adsorption film. The complex formed by CTAB and higher molecular weight PSS, which has larger dimension and stronger interaction, results in higher dilational modulus at lower surfactant bulk concentration. In the case of PSS/anionic surfactant SDS systems, the co-adsorption of PSS at interface through hydrophobic interaction with alkyl chain of SDS leads to the increase of interfacial tension and the decrease of dilational modulus at lower surfactant bulk concentration. For PSS/nonionic surfactant T × 100 systems, PSS may form a sublayer contiguous to the aqueous phase, which has little effect on interfacial tension but slightly decreases dilational modulus.     

Depletion flocculation of latex dispersion in ionic micellar systems

The flocculation behavior of anionic and cationic latex dispersions induced by addition of ionic surfactants with different polarities (SDS and cetyltrimethylammonium bromide (CTAB)) have been evaluated by rheological measurements. It was found that in identical polar surfactant systems with particle surfaces of SDS + anionic lattices and CTAB + cationic lattices, a weak and reversible flocculation has been observed in a limited concentration region of surfactant, which was analyzed as a repletion flocculation induced by the volume-restriction effect of the surfactant micelles. On the other hand, in oppositely charged surfactant systems (SDS + cationic lattices and CTAB + anionic lattices), the particles were flocculated strongly in a low surfactant concentration region, which will be based on the charge neutralization and hydrophobic effects from the adsorbed surfactant molecules. After the particles stabilized by the electrostatic repulsion of adsorbed surfactant layers, the system viscosity shows a weak maximum again in a limited concentration region. This weak maximum was influenced by the shear rate and has a complete reversible character, which means that this weak flocculation will be due to the depletion effect from the free micelles after saturated adsorption.     

A study of interaction of cationic dyes with anionic polyelectrolytes

The interactions of Acridine Orange with Sodium Alginate and Pinacyanol Chloride with Heparin have been investigated by spectrophotometric method. The polymers induce metachromasy in the dye as evidenced from the considerable blue shift in the absorption maxima of the corresponding dyes. The interaction constant and thermodynamic parameters of polymer–dye interactions have been determined. The effect of additives such as alcohols, and urea on the reversal of metachromasy has been studied. The data has been used to determine the stability of the metachromatic complex and the nature of binding. The thermodynamic parameters of interaction revealed that binding between Acridine Orange and Sodium Alginate involved only electrostatic forces while that between Pinacyanol Chloride involved both electrostatic and hydrophobic forces. The reversal studies using surfactants indicated the involvement of both electrostatic and hydrophobic forces in binding. Based on the results it can be concluded that Pinacyanol Chloride is more effective inducing metachromasy than Acridine Orange.     

Polyelectrolyte-surfactant complexes and their influence on the wettability of different polymer surfaces

A novel method to modify the wettability of polymer surfaces is presented. It was found that the surface properties of polymers with different surface-free energies—polyamide 6.6, polypropylene, polyethylene and polystyrene—can be easily changed by a simple modification with premixed polyelectrolyte-surfactant complexes (PSCs). The modification effect can be significantly affected by the complex properties which are influenced by the type of surfactant and polyanion and their charge ratio in a mixture. Complexes having positive charge and low surface tension are most effective. All the complexes investigated show an interaction with polymer surfaces; however, the most effective modification was obtained with hydrophobic substrates such as polypropylene and polystyrene. In contrast to modification with the ‘pure surfactant’, the modification with PSC is persistent also after rinsing.     

Binding of dodecyltrimethylammonium bromide to pH-responsive nanocolloids containing cross-linked methacrylic acid-ethyl acrylate copolymers

The binding of dodecyltrimethylammonium bromide (DoTab) to cross-linked methacrylic acid-ethyl acrylate (MAA-EA) copolymers with various MAA/EA molar ratios at different degrees of neutralization (alpha) was quantitatively studied using isothermal titration calorimetry, dynamic light scattering, surfactant selective electrode, and electrophoresis techniques. The surfactant binds to the polymers at all degrees of neutralization, but via different mechanisms. When alpha is sufficiently high, the binding is primarily electrostatic interaction between the surfactant and ionized polymer chains, which is reinforced by the micellization of electrostatically bound surfactant molecules. The saturation takes place at charge ratio ([DoTa(+)]/[ approximately COO(-)]) close to 1, indicating that the binding is a one-to-one charge neutralization between the cationic surfactant headgroups and anionic carboxylate sites of the polymers. When alpha is low, the binding of DoTab to the unneutralized polymers is driven by the hydrophobic interaction. The onset of hydrophobic binding takes place at DoTab concentration as low as 0.01 mM in 0.05 wt % polymer solution, where the saturation occurs at C(DoTab) approximately 0.19 mM and the amount of bound surfactant is approximately 0.09 mmol of DoTab/(g of polymer) at saturation concentration. The binding results in the formation of the polymer-surfactant complex. For the polymer with low MAA/EA molar ratio, the complex coagulates at a higher DoTab concentration that leads to phase separation; however, for polymers with high MAA/EA molar ratio, the complex remains dispersed and the mixture is stable even at high DoTab concentration.     

表面活性剂对海藻酸钠稀水溶液剪切粘度的影响

通过粘度法考察了不同pH值时, 阴离子聚电解质海藻酸钠(NaAlg)与阴离子表面活性剂十二烷基硫酸钠(SDS)、阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)、非离子表面活性剂辛基酚聚氧乙烯醚(TritonX-100)以及它们的复配体系的相互作用. 研究表明, 在酸性条件下, SDS和TritonX-100与NaAlg之间主要是疏水作用, 随着表面活性剂浓度的增加, 体系粘度下降直到基本不变, CTAB与NaAlg主要发生静电作用和疏水作用, 体系粘度随CTAB浓度的增加呈现先上升后下降的趋势. 在实验条件下, TritonX-100浓度为0.05 mmol·L-1时, SDS的加入, 使得NaAlg/TritonX-100体系的零剪切粘度下降, 而CTAB的加入, 在pH=3.0和5.0时, NaAlg/TritonX-100体系的零剪切粘度出现上升, 在pH=6.4时, 该体系零剪切粘度下降.     

The Interaction Between N–Isopropylacrylamide-Acrylic Acid-Ethyl Methacrylate Thermosensitive Polymers and Cationic Surfactants

The interaction between cationic surfactants and isopropylacrylamide-acrylic acid-ethyl methacrylate (IPA:AA:EMA) terpolymers has been investigated using steady-state fluorescence and spectrophotometric measurements to assess the effect of the polymer composition on the aggregation process and terpolymers’ thermosensitivities. Micropolarity studies using pyrene show that the interaction of cationic surfactants with IPA:AA:EMA terpolymers occurs at surfactant concentrations much smaller than that observed for the pure surfactant in aqueous solution. The critical aggregation concentration (CAC) values decrease with both the hydrocarbon length of the surfactant and the content of ethyl methacrylate. These results were interpreted as a manifestation of the increasing contribution of attractive hydrophobic and electrostatic forces between negatively charged polymer chains and positively charged surfactant molecules. The increase of ethyl methacrylate in the copolymers lowers the CAC due to the larger hydrophobic character of the polymer backbone. The cloud point determination reveals that the lower critical solution temperatures (LCST) depend strongly on the copolymer composition and surfactant nature. The binding of surfactants molecules to the polymer chain screens the electrostatic repulsion between the carboxylic groups inducing a conformational transition and the dehydration of the polymer chain.     

有机电解质在胶束催化聚苯乙烯氯甲基化反应中的作用

在实施聚苯乙烯氯甲基化反应的胶束催化体系中加入四丁基溴化铵 ((Bu)₄NBr, TBAB), 研究了有机电解质TBAB对胶束催化反应的影响规律. 实验结果表明, 在非离子表面活性剂NP-10及阴离子表面活性剂SDS的胶束催化体系中, TBAB的加入使聚苯乙烯氯甲基化反应的速率明显增大, 前者尤为突出；而在阳离子表面活性剂CTAB的胶束催化体系中, TBAB的加入几乎对反应速率无促进作用. 这种结果一方面归因于加入电解质TBAB会降低SDS的临界胶束浓度, 从而增强对聚苯乙烯四氯化碳溶液的增溶能力；更主要的原因是TBAB的丁基与表面活性剂碳氢链间的疏水相互作用会使季铵离子(Bu)₄N⁺嵌入SDS的胶束之中, 结合到NP-10的胶束表面, 使SDS胶束的阴离子头基对亲核取代反应(控制步骤)的禁阻作用得以减缓, 使NP-10的胶束表面携带了正电荷, 显著促进亲核取代反应的进行, 而对于CTAB的胶束, 由于静电排斥作用, 季铵离子(Bu)₄N⁺不能接近CTAB的胶束, 故TBAB的加入对聚苯乙烯氯甲基化反应不产生作用.     

Micellization and synergistic interaction of binary surfactant mixtures based on sodium nonylphenol polyoxyethylene ether sulfate

Mixed micelle formation and synergistic interactions of binary surfactant combinations of sodium nonylphenol polyoxyethylene ether sulfate (NPES) with typical surfactants such as sodium dodecyl sulfate (SDS), Triton X-100 (TX100), cetyl trimethyl ammonium bromide (CTAB), and sodium bis(2-ethylhexyl) sulfosuccinate (AOT) at 25 degrees C in the presence of NaCl have been investigated. The critical micelle concentration of the binary mixtures has been quantitatively estimated by steady-state fluorescence measurements. The micellar characteristics such as composition, activity coefficients, and mutual interaction parameters have been estimated following different theoretical treatments. Investigation on the micellization and synergistic interaction of NPES with four kinds of surfactants showed that the behavior of the binary mixture deviated from the ideal state. The analysis revealed that the interaction parameter values (beta) varied with variation of solvent composition. Besides the strong electrostatic attraction between the oppositely charged surfactant NPES-CTAB mixture, the interaction between NPES and SDS also showed far more deviation from ideal behavior than that of TX100 and AOT. The reason for the synergism is also discussed and the results show that an ionic and a nonionic surfactant character existed concurrently in NPES due to the combination of a sulfate group and polyoxyethylene as a hydrophilic moiety. Zeta potential and diffusion coefficient measurements of micelles confirmed the synergistic interaction between the binary surfactants.     

Interaction between the water soluble poly{1,4-phenylene-[9,9-bis(4-phenoxy butylsulfonate)]fluorene-2,7-diyl} copolymer and ionic surfactants followed by spectroscopic and conductivity measurements

The interaction has been studied in aqueous solutions between a negatively charged conjugated polyelectrolyte poly{1,4-phenylene-[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer (PBS-PFP) and several cationic tetraalkylammonium surfactants with different structures (alkyl chain length, counterion, or double alkyl chain), with tetramethylammonium cations and with the anionic surfactant sodium dodecyl sulfate (SDS) by electronic absorption and emission spectroscopy and by conductivity measurements. The results are compared with those previously obtained on the interaction of the same polymer with the nonionic surfactant C12E5. The nature of the electrostatic or hydrophobic polymer-surfactant interactions leads to very different behavior. The polymer induces the aggregation with the cationic surfactants at concentrations well below the critical micelle concentration, while this is inhibited with the anionic SDS, as demonstrated from conductivity measurements. The interaction with cationic surfactants only shows a small dependence on alkyl chain length or counterion and is suggested to be dominated by electrostatic interactions. In contrast to previous studies with the nonionic C12E5, both the cationic and the anionic surfactants quench the PBS-PFP emission intensity, leading also to a decrease in the polymer emission lifetime. However, the interaction with these cationic surfactants leads to the appearance of a new emission band (approximately 525 nm), which may be due to energy hopping to defect sites due to the increase of PBS-PFP interchain interaction favored by charge neutralization of the anionic polymer by cationic surfactant and by hydrophobic interactions involving the surfactant alkyl chains, since the same green band is not observed by adding either tetramethylammonium hydroxide or chloride. This effect suggests that the cationic surfactants are changing the nature of PBS-PFP aggregates. The nature of the polymer and surfactant interactions can, thus, be used to control the spectroscopic and conductivity properties of the polymer, which may have implications in its applications.     

羧甲基淀粉与十六烷基三甲基溴化铵的相互作用研究

通过电导法、粒度法、光谱及热分析等方法研究了羧甲基淀粉与十六烷基三甲基溴化铵之间的相互作用。结果表明,在较低表面活性剂浓度下,静电作用使得羧甲基淀粉与十六烷基三甲基溴化铵发生复合,这一浓度比单一表面活性剂的临界胶束浓度（cmc）低1个数量级;但随表面活性剂的增加,复合物溶液经历澄清-混浊-澄清过程,说明表面活性剂起到了...     

Interaction Between 1-Dodecyl-3-Methylimidazolium Bromide and Sodium Carboxymethylcellulose in Aqueous Solution: Effect of Polymer Concentration

Effect of the concentration of water-soluble polyanion (sodium carboxymethylcellulose, NaCMC) on the interaction between a cationic surfactant (1-dodecyl-3-methylimidazolium bromide, C₁₂mimBr) and NaCMC in aqueous solution has been studied by isothermal titration microcalorimetry (ITC), conductivity, surface tension, and rheological measurements. From the surfactant/polymer interacting enthalpy, it can be deduced that the electrostatic attraction between the cationic surfactant and anionic polyelectrolyte causes an endothermic process, and the C₁₂mimBr monomers binding to the NaCMC chains to form micelle-like aggregates through hydrophobic interaction is an exothermic process. Increasing the NaCMC concentration causes the interaction between C₁₂mimBr and NaCMC to decrease, and the characteristic surfactant concentrations, including the critical aggregation surfactant concentration (CAC), the surfactant concentration to form free micelles (C_m), and the saturation concentration of surfactant on the NaCMC chains (C_S) to increase. Because of the strong electrostatic interaction between C₁₂mimBr and NaCMC, the formation of C₁₂mimBr/NaCMC complexes can lead to precipitation or redissolution depending on solution composition, so the critical precipitation concentration (C_P) and the onset of a redissolution concentration (C_R) has been determined by the electrical conductivity. The rheological results reveal a dramatic increase in solution viscosity around the CAC, attributed to interpolymer cross-linking through the formation of mixed micelles involving the carboxylic acid groups of NaCMC and the surfactant.     

Interaction of cationic surfactants with carboxymethylcellulose in aqueous media

We have examined the polymer-surfactant interaction in mixed solutions of the cationic surfactants, i.e., dodecyltrimethylammonium chloride, dodecyltrimethylammonium bromide, tetradecyltrimethylammonium bromide, hexadecyltrimethylammonium bromide, tetradecyltriphenylphosphonium bromide, and tetradecylpyridinium bromide and a semiflexible anionic polyelectrolyte carboxymethylcellulose in water and aqueous salt solutions by various techniques: tensiometry, viscosimetry or ion-selective electrode method, and dynamic light scattering. We have investigated the effect of varying surfactant chain length, head group size, counterion, and ionic strength on the critical aggregation concentration (CAC) of mixed polymer surfactant systems and the collapse of the polymer molecule under different solution conditions. The CAC decreases with increasing alkyl chain length. Above a certain surfactant concentration, mixed aggregates start growing until their macroscopic phase separation. The growth is more rapid with greater surfactant tail length and with increasing head group size. This is attributed in both cases to the increasing hydrophobic interaction between polymer and surfactant. Among surfactants with monovalent halide counterions, iodide induces the strongest binding, reflected by the onset of growth of the mixed aggregates at low surfactant concentration. This is perhaps related to the decreasing hydration of the counterion from chloride to iodide. The surfactant concentration at which the viscosity of the solution starts to decrease sharply is smaller than the CAC, and probably reflects polymer chain shrinkage due to noncooperative binding.     

The Interaction between High-Molecular-Weight Flocculents and Ionic Surfactants

The interaction between the anionic and cationic polyelectrolytes of various molecular masses and charges and the ionic surfactants in aqueous and salt solutions is studied by viscometry, conductometry, light scattering, and electrophoresis. Oppositely charged molecules of surfactant and polymer form strong complexes due to the forces of electrostatic attraction that is manifested in a significant decrease in the viscosity and light transmission, as well as in the relative reduction in solution conductivity. As the surfactant/polyelectrolyte ratio increases, the forming complexes precipitated and then dissolved again. In the case of strongly charged polyelectrolytes, the partial dissolution of precipitates was observed preceding the wide region of destabilization. In this region, the value of surfactant/polyelectrolyte charge ratio reaches 3–4. The interaction between the cationic surfactants and anionic polyelectrolyte increases with the lengthening of alkyl radical, thus indicating the presence of cooperative interactions between the surfactant molecules bonded to polymer and the important role of relevant hydrophobic interactions. As a result, the interaction between the high-molecular-weight anionic polyelectrolytes and anionic surfactants containing aromatic core takes place in some cases.