Thin-layer hydrodynamic biamperometric end-point detection: application to the coulometric titration of arsenic(III) with bromine

A sandwich-type thin-layer cell has been applied to hydrodynamic biamperometric end-point detection in coulometric titrations. The detector cell, constructed from two pieces of teflon, has platinum indicator electrodes and is placed in a flow loop attached to the coulometric titration cell. The thin-layer cavity has a volume of 6.5 μl and a thickness of 51μm, which are obtained using teflon tape as a spacer. A peristaltic pump maintains a continual flow through the loop. The titration cell is a closed vessel completely filled with the solution to be titrated. Operational amplifier circuits control the potential difference applied across the two thin-layer electrodes, and to measure the current developed in the thin-layer cell. Noise arising from the pulsed nature of the flow is reduced by a factor of 25 by using an electronic filter. The titration of arsenic(III) with electrogenerated bromine was used to study the performance of the system. Concentrations from 24 ppb to 1.6 ppm can be determined with relative inaccuracies of +4 and +0.1%, respectively.     

Coulometric titration with air transported sample

Air transported samples of a mixture containing the analyte and a supporting electrolyte are consecutively propelled into a microconduit system through a titration cell, a coil and a detector cell. Different amounts of electrochemically generated titrant are obtained in the separate samples while they are passing through the titration cell. Various quantities of the titrant are achieved by changing the duration of the titrant generating process that is done by various time for the sample solution staying in the titration cell (different sample movement rate). The titrated sample is then homogenised in the coil and detected in an electrochemical detector cell that supplies necessary data for the analyte determination. The declared method is experimentally verified on coulometric titration of hydrochloric acid (HCl) with electrogenerated sodium hydroxide and a titration of aniline with bromine generated in a bromide solution.     

Coulometric titration with electrogenerated +2 tin: Determination of iodine,bromine, and various oxidants via iodometry

The use of electrolytically generated +2 tin as a coulometric titrant has been studied. In a 3 to 4M sodium bromide and 0.2N hydrochloric acid solution, containing 0.2M stannie chloride, the generation of stannous ion is 100% efficient up to a current density of 80 mA/cm². With this medium iodine and bromine can be titrated coulometrically with errors of about ±0.3% or less. The titration is well suited for the iodometric determination of strong oxidants. Employing stannous ion and bromine for direct and reverse titrations, quinone and hydroquinone have been titrated.     

Determination of chlorine and bromine in rocks by alkaline fusion with ion chromatography detection

This study describes the use of alkaline fusion by sodium peroxide to dissolve chlorine and bromine in rocks to produce a solution which, with appropriate pre-treatment, is suitable for analysis by ion chromatography. Results are given for a selection of sedimentary and igneous rocks. The accuracy of the fusion method is evaluated by analysis of Geological Survey of Japan reference materials. Additionally, a spike recovery test is performed to show that the fusion process is quantitative for chlorine and bromine. The results for chlorine are in the range 58–3860 mg kg⁻¹ and show good agreement both with results obtained by pyrohydrolysis with flow injection colorimetric detection and results obtained by aqueous leaching of the samples with ion chromatography detection. Results for bromine are in the range <3–4.5 mg kg⁻¹. Because of the relatively few data obtained in this study and the relative paucity of published data for reference materials, an assessment of the accuracy of the fusion method for bromine is more difficult. The limits of detection for this method are 36 and 3 mg kg⁻¹ for chlorine and bromine, respectively.     

Coulo-bipotentiometric titrations in the analysis of bromine in bromine-doped cadmium chalcogenides

The detection of bromine in the 60–1300 p.p.m. range in Cd-chalcogenideshas been proved feasible by a d.e.p. version of argentometric titration, where the titrant (silver ions) is coulo-generated. The analytical method described seems to meet the requirements of the simplicity necessary when routine work is needed and when small samples (about 20–100 mg) are available.     

Potentiometric and Coulometric Determination of Carbimazole

ABSTRACT

A method for the determination of carbimazole involving its reaction with iodine in an alkaline medium is presented. In volumetric titration with potentiometric end-point detection the range of determination is 30–500 μmol (5.6–93 mg). In coulometric titration using biamperometric end-point detection, 0.5–20 μmol (0.09–3.7 mg) of carbimazole was successfully determined. The coulometric titration was applied to the determination of carbimazole in tablets.     

Rapid coulometric titrations with a new design of electrolytic cell

The construction of a compact coulometric titration cell with integrated injection valve and photometric and biamperometric flow-through detectors is reported. The lower part of the cell is designed as a magnetic centrifugal pump by means of which the supporting electrolyte is propelled through the other functional parte. Various rapid titration procedures were developed. The favourable flow conditions allow titration times between 10 and 100 s. The principle of continuous titration up to a preselected set-point is applied for both the photometric and biamperometric detectors. Microgram amounts of cyanide and thioglycolic acid are titrated directly with electro-generated iodine. Full advantage of the cell design is obtained in the implementation of back-titration procedures during which the sample and the reagent in excess are injected simultaneously into the circulating electrolyte. Back-titrations are implemented to determine microgram amounts of iodine, copper (II) and iron (III).     

A new approach to flow-batch titration. A monosegmented flow titrator with coulometric reagent generation and potentiometric or biamperometric detection

Monosegmented flow analysis (MSFA) has been used as a flow-batch system to produce a simple, robust, and mechanized titrator that enables true titrations to be performed without the use of standards. This paper also introduces the use of coulometry with monosegmented titration by proposing a versatile flow cell. Coulometric generation of the titrand is attractive for titrations performed in monosegmented systems, because the reagent can be added without increasing the volume of sample injected. Also, biamperomeric and potentiometric detection of titration end-points can increase the versatility of the monosegmented titrator. The cell integrates coulometric generation of the titrand with detection of end-point by potentiometry or biamperometry. The resulting titrator is a flow-batch system in which the liquid monosegment, constrained by the interfaces of the gaseous carrier stream, plays the role of a sample of known volume to be titrated. The system has been used for determination of ascorbic acid, by coulometric generation of I₂ with biamperometric detection, and for determination of Fe(II), by coulometric generation of Ce(IV) with potentiometric detection of the end-point, both in feed supplements.     

Electrogenerated bromine as a coulometric reagent for the estimation of the bioavailability of polyphenols

A method is proposed for the estimation of the bioavailability of polyphenols using electrogenerated bromine as a coulometric titrant. The titration of model solutions of casein and bovine serum albumin (BSA) shows that casein does not interact with electrogenerated bromine, while BSA reacts with the titrant in the ratio 1: 63. The proteins bind rutin and quercetin (from 14 to 90%) at a high rate and thus reduce the bioavailability of polyphenols. The concentration of free polyphenol is reduced with an increase in the concentration of protein in the mixture. The total antioxidant capacity (AOC) of tea is determined. Green tea is shown to possess higher AOC than the black one because of the partial oxidation of polyphenols to respective thearubigins and theaflavins at the fermentation step in the production of green tea. The total AOC of tea drops from 7 to 85%, in proportion to the increase in the amount of milk in the mixture. Milk proteins bind tea polyphenols into complexes because of intermolecular interactions and thus reduce their bioavailability. The observed effect of milk is independent of the brand of black tea. The degree of reduction of the total AOC of tea in going from one tea to another remains virtually constant.     

溴值法测定加氢石油树脂不饱和度局限性分析

探讨了国内现行行业标准《HG2231-91石油树脂(PR)溴值试验方法》在测定深度加氢石油树脂不饱和度时存在的局限性. 实验结果表明, 在测定不饱和度较低的加氢石油树脂的溴值时, 应采用浓度为0.1 mol/L的Br标准滴定溶液, 加入量为6～7 mL;碘化钾的加入量应为假设溴值为零时的理论用量, 这样在测定不饱和度较低的石油树脂的溴值时, 才能保证碘化钾过量, 得到可靠的溴值.     

Coulometric titration of some phenolic steroids with bromine based on thin-layer hydrodynamic biamperometric end-point detection

Four phenolic steroids were titrated coulometrically with bromine in a methanol—water solvent containing hydrochloric acid and sodium bromide. End-point detection was achieved with a twin electrode thin-layer cell placed in a flow loop connected to the titration vessel. Linear-segmented biamperometric titration curves were recorded. Concentrations of 17-β-estradiol were determined in the range from 442 ppb to 8.84 ppm with relative inaccuracies of -1.3% and +2.2%, respectively. Part-per-million solutions of estrone and estriol were titrated with good accuracy and precision. Somewhat poorer precision and accuracy was found for the determination of 17-α-ethynyl estradiol.     

The quantitative electrochemical generation of bromine in acetic acid

The quantitative electrochemical generation of bromine at a platinum electrode in acetic acid is described. Coulometric methods for the determination of hydroquinone and 2-methylhydroquinone are reported. The best results are obtained with 0.7–1.1 M potassium acetate solutions as supporting electrolyte, and biamperometric end-point detection. The effects of water and acetic anhydride on the accuracy of titrations are discussed. Determination of the formal redox potential of the Br₂/Br^- system in a 0.9 M potassium acetate solution in acetic acid showed that bromide is oxidized directly to bromine at a platinum electrode with 100% current efficiency.     

A general method for coulometric titration of alkylphenols with bromine

A general method for coulometric titration of alkylphenols with anodically generated bromine is described. The reaction is carried out in a water-acetic acid medium and the reactivity is governed by varying the water content and the concentration of bromide ion and by the addition of pyridine. In that way all types of alkylphenols can be titrated quantitatively. For phenols containing more than one free ortho and para position, the titration can also be carried out either to the monobromination stage or to the full bromination stage. The mean relative error is ± 1·2% for monobromination and ±1·5% for full bromination. A method for rapid determination of the number of free ortho and para positions in alkylphenols by using two coulometric titrations is also described.     

Potentiometric and coulometric titration of 2-thiobarbituric acid

A new method for the determination of 2-thiobarbituric acid, using its reaction with iodine in an alkaline medium is presented. In the volumetric titration with potentiometric end-point detection, the determinability range is 10-400 micromol (1.4-58 mg). In coulometric titration using the biamperometric end-point detection, 0.1-20 micromol (1.4 x 10(-2)-2.9 mg) of 2-thiobarbituric acid was successfully determined.     

Electrochemical Determination of Lipoic Acid

Procedures for determining lipoic acid by voltammetry and coulometric titration with electrogenerated halogens using the biamperometric indication of the titration end-point were developed. Possible mechanisms of lipoic acid oxidation with electrogenerated halogens are discussed. Microgram amounts of lipoic acid were determined in model solutions with an RSD of 1–2%. The analytical range of lipoic acid found by voltammetry at a glassy-carbon electrode lies between 1.15 × 10^–5 and 1.73 × 10^–4 M. The detection limit for lipoic acid is 5.75 × 10^–6 M.     

A general method for coulometric titration of alkylanilines with bromine

A general method is described for the coulometric titration of alkylanilines with anodically generated bromine. The reaction is carried out in water-acetic acid medium and the reactivity is governed by varying the water content and the concentration of bromide ion and by the addition of pyridine. In this way most types of alkylanilines can be titrated quantitatively. Unlike the case for alkylphenols, the bromine consumption is not always higher in the pyridine-containing media than in the pyridine-free. The bromine consumption is also more dependent on the bromide content of the medium than it is for alkylphenols. The mean relative error, for the best medium for each compound, is +/-0.9% for primary alkylanilines, +/-0.9% for secondary and +/-1.2% for tertiary.     

Coulometric Karl Fischer titration of trace water in diaphragm-free cells

Factors influencing the accuracy and precision for diaphragm-free Karl Fischer coulometric determinations of low μg-amounts of water have been studied using the Metrohm 756 (pulsed current) coulometer and eight different types of commercial coulometric reagents and some modifications of these. As in the case of diaphragm-free coulometric titration of large amounts of water, the positive errors, due to the formation of oxidizable reduction products (of sulfur dioxide) in the cathode reaction (besides hydrogen), were found to be minimized by the use of highest possible pulse current (in the range 100–400 mA) in combination with the fastest possible titration rate. Most accurate (102–103%) and precise results (typical relative standard deviation 1.8%) were obtained for reagents containing very large concentrations of imidazole in combination with the presence of modifiers like hexanol, chloroform and propylene glycol (i.e. the HYDRA-POINT reagents). Similar results were obtained when this type of reagent was mixed 60/40 with xylene according to the ASTM recommendation for water determinations in petroleum products like crude and lubricating oils. Addition of decanol to this type of reagent mixture was found to reduce the influence from the oxidative reduction products significantly. A reduction of the error from 3.6% relative to 1.6% was achieved by addition of 9% (v/v) of decanol to a 60/40 reagent mixture of HYDRA-POINT Coulometric Gen (containing hexanol as modifier) and xylene. For larger concentrations of decanol the pulse current had to be lowered to 100 mA and this might explain why no further improvement was observed. An additional attempt to minimize the interference by lowering the concentration of sulfur dioxide in the reagents gave no significant effect. However, by means of a home-built computer-controlled coulometric instrumentation based on continuous instead of pulsed current (including a large cathodic current density) it was possible to achieve recovery rates close to 100% for the best reagents investigated. The reason for this improvement is discussed.     

Microanalytical Determination of Formaldehyde by Direct Titration with Hydroxylamine Using Interdigitated Microelectrode Array Biamperometric End-Point Indicator

 An interdigitated microelectrode array (IDA) biamperometric titration is presented for the microdetermination of formaldehyde. It is based on a direct titration of formaldehyde with hydroxylamine under the formation of formaldoxime. The released hydrogen cations react with hydroxyl anions in 0.1 M NaOH. The interdigitated pair of two individually polarizable microelectrodes serves as a biamperometric end-point indicator. Hydroxylamine together with dissolved free oxygen behave as a quasi reversible mixed redox system, therefore a significant increase of current flowing between the IDA segments polarized by 100 mV is observed when the first excess of titrant appears in the titrated solution. Because of the small dimension of the IDA sensor this principle can be extended for a microanalytical variant of this method. Formaldehyde contents down to 10⁻³ M in small volume waste water samples could be determined by this technique. These samples usually contain carboxylic acids which interfere in iodimetric determinations, but do not influence the titration of formaldehyde with hydroxylamine. Received January 21, 2002; accepted August 7, 2002     

A cell for high-precision constant-current coulometry with external generation of titrant

A cell has been designed for the high-precision coulometric titration, with externally generated titrant, of materials which otherwise undergo undesirable reactions at the working electrodes. With this cell potassium dichromate has been titrated, via its hydrolysis reaction, with hydroxyl ion generated at the cathode, cathodic reduction of the chromium(VI) being circumvented. In this cell 99.9% of the titrant required is generated in one chamber and transferred to another for reaction; the titration is then completed with titrant generated at a second, drip-type electrode working at much lower current. By means of commercially available Leeds and Northrup coulometric titration electrical equipment, titration of NBS 136b Potassium Dichromate gave a purity of 99.976%, standard deviation 0.005%, and of NBS 84d Potassium Acid Phthalate (done as a check) 99.991%, standard deviation 0.005%, both values being in excellent agreement with other work.     

Coulometric redox titrations of some biologically active thiols with iodine in methanol and bromine in acetic acid

The possibility of coulometric titrations of cysteine, 2-thio-uracil, 6-mercaptopurine, and 6-thioguanine with iodine and bromine in methanol and with bromine in acetic acid has been investigated. Conditions have been found for the direct titration of the test substances with iodine in methanol based on their 1-electron oxidation to the corresponding disulphides and for their direct and indirect determination with bromine in acetic acid based on their 6-electron oxidation to the corresponding sulphonic acids.On leave from Department of Analytical Chemistry, Charles University, Prague, Czechoslovakia