Solid-phase synthesis of 1,5-disubstituted 2-aryliminoimidazolidines

The solid-phase synthesis of 1,5-disubstituted 2-aryliminoimidazolidines, starting from resin-bound N-acylated amino acid amides, is described. Exhaustive reduction of resin-bound acylated amino acid amides with borane-THF afforded the corresponding disecondary amines. Further reaction with arylisothiocyanates in the presence of mercuric chloride (HgCl(2)) yielded the corresponding resin-bound 1,5-disubstituted 2-aryliminoimidazolidines. Cleavage of the product from the resin using HF/anisole (95/5) for 1.5 h at 0 degrees C gave the desired products in good yield and purity. The preparation of a large combinatorial library of such compounds is also discussed.     

UPS on Weinreb resin: a facile solid-phase route to aldehyde and ketone derivatives of "unnatural" amino acids and peptides

The solid-phase synthesis of "unnatural" amino aldehydes, amino ketones, peptide aldehydes, and peptide ketones was accomplished from commercially available resin in a series of room temperature reactions. The initial step involved addition of an "unnatural" side chain to the N-terminus of a benzophenone imine-activated Weinreb resin-bound amino acid or peptide derivative. The alkylated imine was hydrolyzed, and the amine was converted to the Boc-, Cbz-, or naphthoyl derivative. The resin-bound substrate was then cleaved with DIBAL-H or a Grignard reagent to give the amino aldehyde, amino ketone, peptide aldehyde, or peptide ketone products. Twenty-four reactions were carried out simultaneously using a "Billboard" reaction apparatus to give products in 27-87% (59% average) isolated yield.     

Relative rates and approximate rate constants for inter- and intramolecular hydrogen transfer reactions of polymer-bound radicals

Measurements of relative rates and rate constants for inter- and intramolecular hydrogen transfer reactions of polymer-bound radicals are reported. The relative rate of reaction of resin-bound primary alkyl radical with tributyltin hydride is about 2 times slower than that of the benchmark reaction in solution. The data do not reveal whether this is due to a reduced rate constant or a lower concentration of tin hydride in the resin phase. Yet the difference between solid and solution reactions is small enough to be neglected, and it appears that rate constants measured in solution can be applied directly to resin-bound radicals. A resin-bound aryl radical abstracts a hydrogen atom rapidly (k = 3 x 10(6) s(-1)) from its own polymer backbone and linker, and a simplified view of the resin as a "solvent" is suggested for predicting such effects with other polymers and linkers. Rapid cyclizations of resin-bound aryl radicals will be possible, but slower cyclizations and most bimolecular reactions will be difficult due to the competing polymer/linker hydrogen transfer.     

Solid-phase synthesis of a farnesylated CaaX peptide library: inhibitors of the Ras CaaX endoprotease

A solid-phase method, based on Kaiser's p-benzophenone oxime resin, was developed for the synthesis of a series of N-acetyl-S-(E, E-farnesylated) Ca(1)a(2)X tetrapeptides as potential inhibitors of recombinant Ras and a-factor converting enzyme (RCE). N-Acetyl-S-(E, E-farnesyl)-L-cysteine was coupled to resin-bound a(1)a(2) dipeptide using HOBt/DCC activation in conjunction with N-BOC chemistry. The protected farnesylated tripeptide was cleaved from the resin with simultaneous addition of the X residue by treating the resin-bound farnesylated Ca(1)a(2) tripeptide with L-amino acid benzyl ester tosylates under mildly acidic conditions. The benzyl ester was saponified, and the resulting carboxylate precipitated by ether to afford a library of tetrapeptides as a mixture of diastereomers at the cysteine center. The peptides were evaluated as inhibitors of recombinant yeast RCE endoprotease (yRCE) to obtain information about the affinity of the enzyme for the a(1)a(2)X portion of the Ca(1)a(2)X moiety.     

Parallel solid-phase synthesis of trisubstituted triazinobenzimidazolediones

An efficient method for the solid-phase synthesis of trisubstituted [1,3,5]triazino[1,2-a]benzimidazole-2,4(3H,10H)-diones from resin-bound amino acids is described. N-acylation of the primary amine of a resin-bound amino acid with 4-fluoro-3-nitrobenzoic acid, followed by displacement of the fluoro group and reduction of the nitro group, generated a resin-bound o-dianilino derivative. The dianilino compound was treated with cyanogen bromide to generate the corresponding iminobenzimidazole, which, following treatment with N-(chlorocarbonyl)isocyanate, afforded the resin-bound triazinodione derivative. Alkylation of the triazinodione compound with an alkyl halide yielded, following cleavage of the solid-support, the trisubstituted [1,3,5]triazino[1,2-a]benzimidazole-2,4(3H,10H)-dione.     

Novel approaches for the solid-phase synthesis of biheterocyclic dihydroimidazole analogues

The solid-phase syntheses of dihydroimidazolyl 2-alkylthiobenzimidazoles, dihydroimidazolyl 2-alkylsulfonylbenzimidazoles, dihydroimidazolyl dihydroquinoxalin-2,3-diones, and dihydroimidazolyl dihydrobenzimidazol-2-imines are described. Following reduction of a resin-bound amino acid amide, the primary amine of the resulting resin-bound diamine was N-acylated with 4-fluoro-3-nitrobenzoic acid. Treatment with POCl3 led to formation of a dihydroimidazole derivative via dehydrative cyclization. The resin-bound dihydroimidazole derivative was then used as the key starting material for the synthesis of the aforementioned biheterocycles. Following cleavage, the resulting compounds, obtained in moderate yield and good purity, were characterized by LC-MS and 1H NMR and 13C NMR spectroscopy.     

Solid-phase synthesis of an oxalic acid amide library

Monoamides of oxalic acid are of interest as bioisosteric replacements for phosphate groups in the design of new enzyme inhibitors. Here, we have demonstrated the use of oxalic acid as a linker to the Wang resin to synthesize individual or libraries of phosphate biosteres. The highly reactive resin-bound acid chloride reacts with arylamines to yield resin-bound N-aryloxamic acids (oxanilic acids). This methodology is especially useful for the rapid synthesis of 2-(oxalylamino)benzoic acids (OBAs), because it can be utilized for library synthesis and eliminates the intermediate purification step necessary in solution-phase reactions. The products are cleaved off the resin with trifluoroacetic acid in dichloromethane in good yields.     

A new colorimetric test for solid-phase amines and thiols

A new, efficient, sensitive, and reliable color test for the visual detection of resin-bound primary and secondary amines is described. The reaction between amines and 1-methyl-2-(4'-nitrophenyl)-imidazo[1,2- a]pyrimidinium perchlorate (DESC) provides the "on-bead generated" colored stable intermediate azadiene. The developed protocols allow detection of resin-bound primary amines in the presence of secondary amines. The test can also be used for the detection of resin bound thiols.     

Titanium reagents for the synthesis of 2-substituted benzo[b]thiophenes on the solid phase

Titanium(IV) benzylidenes (Schrock carbenes) bearing a masked sulfur nucleophile in the ortho position were generated from thioacetals with use of low-valent titanocene complex Cp(2)Ti[P(OEt)(3)](2) and alkylidenated Merrifield resin-bound esters to give enol ethers. Treatment of the resin-bound enol ethers with a 5:5:90 mixture of TFA, TFAA, and dichloromethane led to cleavage from resin, removal of the tert-butyldimethylsilyl (TBDMS) protecting group, and concomitant cyclization to complete the traceless solid-phase synthesis (SPS) of benzothiophenes. Switching the nature of the linker from acid-stable to acid-sensitive ensured good purity.     

Efficient solid-phase synthesis of 1,3,5-trisubstituted 1,3,5-triazine-2,4,6-triones

The solid-phase synthesis of 1,3-disubstituted and 1,3,5-trisubstituted 1,3,5-triazine-2,4,6-triones from MBHA and Wang resin is described. Reaction of resin-bound amino acids with isocyanates yield resin-bound ureas, which further react with chlorocarbonyl isocyanate in toluene at 65 degrees C to selectively afford the resin-bound 1,3-disubstituted 1,3,5-triazine-2,4,6-triones. Selective alkylation at the N-5 position of the resin-bound 1,3-disubstituted 1,3,5-triazine-2,4,6-triones was accomplished by treatment with alkyl halides in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU). The desired products were cleaved from their solid support and obtained in good yield and purity. The method can be employed in production of toltrazuril analogue libraries for identification of new anticoccidial agents.     

Introduction of the Aib-Pro unit into peptides by means of the ‘azirine/oxazolone method’ on solid phase

A method for the direct introduction of Aib-Pro into peptides on solid phase was developed. The Aib-Pro unit was introduced by means of the ‘azirine/oxazolone method’ using allyl N-(2,2-dimethyl-2H-azirin-3-yl)-l-prolinate as the synthon. After the reaction of the resin-bound amino or peptide acid with allyl N-(2,2-dimethyl-2H-azirin-3-yl)-l-prolinate, the allyl protecting group of the resulting extended peptide could be removed by a mild Pd⁰-promoted procedure. Cleavage of the peptide from the resin was performed with UV light at 352 nm and yielded C-terminal protected peptides. The method found a successful application in the syntheses of different Aib-Pro containing peptaibol segments. Furthermore, a protected derivative of the peptide antibiotic Trichovirin I 1B was prepared by segment condensation.     

Solid-phase synthesis of 3-aminopyrrole-2,5-dicarboxylate analogues

An efficient strategy has been developed for the solid-phase parallel synthesis of 3-aminopyrrole-2,5-dicarboxylate analogues. A library of twenty-nine 2,3,5-trisubstituted pyrroles has been synthesized on Wang resin by a 5-6 step process. The attachment of (2S,4R)-4-hydroxy-N-(PhF)proline cesium salt (PhF = 9-(9-phenylfluorenyl)) to Wang bromide resin, followed by alcohol oxidation, produced the resin-bound 4-oxo-N-(PhF)prolinate as the pyrrole precursor. Resin-bound 3-aminopyrroles were synthesized by treatment of the oxo-N-(PhF)prolinate resin with different secondary amines and diversified at the 2-position by acylation with trichloroacetyl chloride and haloform reactions with primary amines. 3-Aminopyrrole-2,5-dicarboxylates were isolated in 81-99% purity and 51-99% yields after cleavage from the resin using TFA or sodium methoxide.     

Deazapurine solid-phase synthesis: construction of 3-substituted pyrrolo[3,2-d]pyrimidine-6-carboxylates on cross-linked polystyrene bearing a cysteamine linker

The first solid-phase methodology for the preparation of pyrrolo[3,2-d]pyrimidines is presented. Merrifield resin bearing a cysteamine "traceless" linker was treated with 4-oxo-N-(PhF)proline benzyl ester (10; PhF = 9-(9-phenylfluorenyl)) to provide resin-bound aminopyrrole 20, which was treated with ethyl, phenyl, 4-phenoxyphenyl, and 2,4-dimethoxyphenyl isocyanates to furnish resin-bound ureidopyrroles 21a-d. Resin-bound pyrrolo[3,2-d]pyrimidines 22a-d were then obtained by acylation of 21 using trichloroacetyl chloride in dioxane followed by treatment with Cs2CO3 in DMF. Cleavage of pyrrolo[3,2-d]pyrimidines 22a-d from the resin was achieved in two steps, by oxidation of the sulfur to the sulfone followed by beta-elimination in the presence of t-BuONa. Four pyrrolo[3,2-d]pyrimidines, 24a-d, with different alkyl and aryl substituents at the N3 pyrimidine nitrogen, were thus obtained in overall yields of 42-50% and purities of 90-100%.     

Stereocontrolled solid-phase synthesis of fluorinated partially-modified retropeptides via tandem aza-Michael/enolate-protonation

N-Acylation of Wang resin-bound l-α-amino acids with 2-trifluoromethyl-propenoyl chloride, followed by asymmetric tandem aza-Michael/enolate-protonation by a series of l-α-amino esters and final release from the resin, afforded a representative library of partially-modified retropeptides incorporating a stereodefined trifluoroalanine surrogate. The stereocontrol can be dramatically improved (up to 15:1) by using apolar solvents like carbon tetrachloride and DABCO as base.     

Traceless solid phase synthesis of 2-substituted pyrimidines using an 'off-the-shelf' chlorogermane-functionalised resin

The parallel solid phase synthesis of an 18-member library of 2-substituted pyrimidines is described using a chlorogermane-functionalised resin. The success of the key Pinner-type condensations between a resin-bound enaminone and an array of amidine hydrochlorides highlights the stability of arylgermane linkers (cf. arylsilanes) towards strongly basic/nucleophilic conditions.     

Solid-phase synthesis of polymers using the ring-opening metathesis polymerization

We report a general method for the solid-phase synthesis of polymers via the ring-opening metathesis polymerization (ROMP). The method involves polymerization in solution to form a block copolymer, immobilization of the polymer via reaction of one block with a resin-bound functional group, modification of the other block, and liberation of the polymer from the resin. We demonstrated the utility of this approach by generating a block copolymer with an N-hydroxysuccinimidyl ester-substituted block (for on-resin functionalization) and a maleimide-substituted block (for conjugation to the resin). We showed that the Diels-Alder reaction can be employed to immobilize the polymers and that amines of diverse structure can be used to modify the resin-bound polymers. The reversibility of the furan-maleimide Diels-Alder adduct was exploited to liberate the polymer from the support. Specifically, treatment of the resin with cyclopentadiene resulted in complete polymer release. The resulting polymers are functional: they were as potent in assays with the lectin concanavalin A as polymers generated by traditional solution routes. We anticipate that this method can be used for the rapid synthesis of diverse polymers via ROMP.     

Syntheses of 2-alkylamino- and 2-dialkylamino-4,6-diarylpyridines and 2,4,6-trisubstituted pyrimidines using solid-phase-bound chalcones

Several substituted 2- and 4-hydroxyacetophenones are linked to Wang resin via a modified Mitsunobu protocol. These resin-bound acetophenones are condensed with aromatic aldehydes, and the resulting chalcones 5 are used for the synthesis of 2-dialkylamino- (9a-d) and 2-alkylamino-4,6-diarylpyridines (11a-f), and 2-alkyl-4,6-diaryl- (14a) and 2,4,6-triarylpyrimidines (14b,c) in a manner suitable for combinatorial applications.     

Direct molecular weight determination of resin-bound oligopeptides using 252Cf plasma-desorption mass spectrometry.

Plasma-desorption mass spectrometry is proved to be capable of the direct molecular weight determination of totally protected resin-bound oligopeptides. The molecular weight measured is the molecular weight of the fully protected oligopeptide including the molecular weight of the linker, which connects the oligopeptide and the polystyrene resin. This method makes it possible to check the success of (a step in) the synthesis of a peptide before its deprotection or cleaving from the resin. This can make it a strong tool in the analysis of resin-bound oligopeptides.     

Immobilization and recovery of au nanoparticles from anion exchange resin: resin-bound nanoparticle matrix as a catalyst for the reduction of 4-nitrophenol

The immobilization of gold nanoparticles in anion exchange resin and their quantitative retrieval by means of a cationic surfactant, cetylpyridinium chloride, is studied. The resin-bound gold nanoparticles (R-Au) have been used successfully as a solid-phase catalyst for the reduction of 4-nitrophenol by sodium borohydride. At the end of the reaction, the solid matrix remains activated and separated from the product. The recycling of catalyst particles after the quantitative reduction of 4-nitrophenol and the recovery of gold nanoparticles with unaffected particle morphology from the resin-bound gold nanoparticle entity have been reported.     

Method for activation and recycling of trityl resins

This note describes a rapid and mild strategy for the loading of alcohols and anilines onto a polystyrene triphenylmethyl (trityl) resin. High loadings were obtained in a matter of minutes by treating resin-bound trityl chloride with triethyloxonium tetrafluoroborate followed by alcohols or anilines. Yields were comparable or better than known literature methods. Recycling of the recovered resin was also possible using the developed method.