Single-walled carbon nanotubes exhibit strong antimicrobial activity

We provide the first direct evidence that highly purified single-walled carbon nanotubes (SWNTs) exhibit strong antimicrobial activity. By using a pristine SWNT with a narrow diameter distribution, we demonstrate that cell membrane damage resulting from direct contact with SWNT aggregates is the likely mechanism leading to bacterial cell death. This finding may be useful in the application of SWNTs as building blocks for antimicrobial materials.     

Racemic single-walled carbon nanotubes exhibit circular dichroism when wrapped with DNA

We have found that racemic mixtures of chiral single-walled nanotubes (SWNTs) wrapped with d(GT)20 DNA oligomer exhibit circular dichroism (CD). We attribute the CD signal to induced CD arising from the coupling of transition moments of the SWNTs and the DNA. Although the nanotube mixture appears to contain both enantiomers in equal amounts, DNA-SWNT transition moment interaction is more constructive for one SWNT enantiomer over the other, resulting in an overall CD signal.     

Carbon quantum dots-embedded graphitic carbon nitride nanotubes for enhancing the power conversion efficiency of sensitized solar cells

Graphitic carbon nitride (CN) has been widely used as a photocatalyst. Very few researchers have reported the use of CN in quantum dot-sensitized solar cells (QDSCs). In this study, we prepared nitrogen-rich carbon quantum dot (CQD)-embedded CN nanotubes (CCNTs) with freeze-dried urea and CQD precursors. The prepared CCNTs were used as efficient light harvesters in QDSCs for the first time; their use significantly improved the power conversion efficiency (PCE) of the solar cells compared to those of CQD, CN NT, and bulk CN-sensitized solar cells. The CCNT-sensitized solar cell exhibits 1.01% PCE, which is the highest value among carbon-based QDSCs. Moreover, the CCNTs-sensitized device showed superior photostability over those of CQDs-, CN NTs-, and bulk CN-sensitized devices. The improved performance of the CCNT-sensitized solar cell can be attributed to the facilitated photoelectron transport and suppressed charge recombination. The integration of nitrogen-rich CQDs in CCNTs adjusts the band alignment and maximizes the visible light harvest by reducing the energy barriers, which improves the charge collection efficiency of the device.     

In situ quantum dot growth on multiwalled carbon nanotubes

The generation of nanoscale interconnects and supramolecular, hierarchical assemblies enables the development of a number of novel nanoscale applications. A rational approach toward engineering a robust system is through chemical recognition. Here, we show the in situ mineralization of crystalline CdTe quantum dots on the surfaces of oxidized multiwalled carbon nanotubes (MWNTs). We coordinate metallic precursors of quantum dots directly onto nanotubes and then proceed with in situ growth. The resulting network of molecular-scale "fused" nanotube-nanocrystal heterojunctions demonstrates a controlled synthetic route to the synthesis of complex nanoscale heterostructures. Extensive characterization of these heterostructures has been performed using scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV-visible spectroscopy, and X-ray diffraction (XRD).     

Dendron-tethered and templated CdS quantum dots on single-walled carbon nanotubes

CdS nanoparticles on the surface of single-walled carbon nanotubes (SWNTs) were templated and stabilized through the initial attachment of 1 --> 3 C-branched amide-based dendrons and were both photophysically and morphologically characterized. The CdS clusters were shown to be ca. 1.4 nm in diameter as calculated from their optical absorption spectra and exhibited reduced fluorescence emission intensity at 434 nm compared to that of CdS quantum dots stabilized by untethered dendrons due to partial emission quenching by the SWNT. Unchanged UV absorption behavior of these materials indicated that they are stable > 90 days at 25 degrees C.     

Directly observed covalent coupling of quantum dots to single-wall carbon nanotubes

Carboxylate chemistry is used to covalently couple metal nanoparticles to defect sites in controllably oxidized single-walled carbon nanotube termini and side-walls, and this process monitored by atomic force microscopy.     

Fluorination of single walled carbon nanotubes at low temperature: Towards the reversible fluorine storage into carbon nanotubes

Fluorination of single walled carbon nanotubes was carried out at low temperature in the −191/25 °C range under 1 atm pure fluorine gas. In such conditions, the resulting C–F bonding is significantly weaker than for samples fluorinated at 280 °C. If the fluorination is performed at low temperature, fluorine atoms can be then removed from the host structure by moderated heating until 300 °C or by vacuum without strong damage on the tubes. After thermal defluorination, the resulting sample can be refluorinated similarly than the pristine tubes.     

Electrochemical preparation of luminescent graphene quantum dots from multiwalled carbon nanotubes

Green luminescent, graphene quantum dots (GQDs) with a uniform size of 3, 5, and 8.2(±0.3)?nm in diameter were prepared electrochemically from MWCNTs in propylene carbonate by using LiClO(4) at 90?°C, whereas similar particles of 23(±2)?nm were obtained at 30?°C under identical conditions. Both these sets of GQDs displayed a remarkable quantum efficiency of 6.3 and 5.1?%, respectively. This method offers a novel strategy to synthesise size-tunable GQDs as evidenced by multiple characterisation techniques like transmission and scanning electron microscopy, atomic force microscopy, Raman spectroscopy and X-ray diffraction (XRD). Photoluminescence of these GQDs can be tailored by size variation through a systematic change in key process parameters, like diameter of carbon nanotube, electric field, concentration of supporting electrolyte and temperature. GQDs are promising candidates for a variety of applications, such as biomarkers, nanoelectronic devices and chemosensors due to their unique features, like high photostability, biocompatibility, nontoxicity and tunable solubility in water.     

Structure and electronic properties of deformed single-walled carbon nanotubes: quantum calculations

The electronic properties of single-walled carbon nanotubes (SWCNTs) can be modified by deforming their structure under high pressure. The aim of this study was to use quantum calculations to investigate one such property, the energy band gap, in relation to molecular structures of armchair and zigzag SWCNTs of various sizes and shapes deformed by applied forces. To model the increase in pressure, the degree of flatness (η) of the SWCNTs was adjusted as the primary parameter. The calculations gave accurate C-C bond lengths of the SWCNTs in their distorted states; these distortions significantly affected the electronic properties, especially the energy band gap of the SWCNTs. These results may contribute to a more refined design of new nano-electronic devices.     

催化裂解低碳烷烃制备碳纳米管薄膜

碳纳米管性质奇特、用途广泛[1]。目前制备碳纳米管薄膜的方法主要有电弧放电法[2]、催化裂解[3]、及真空过滤碳纳米管悬浮液制备“巴基管纸”(Buckypaper)[4]等。本文采用镀镍基板催化裂解低碳烷烃法制备碳纳米管薄膜,考察了镀膜时间、蚀刻和氨水处理等条件对碳纳米管薄膜产物形貌的影响。1　实验部份1 1　镀膜与后处理采用离子溅射法在硅酸盐基板上镀镍,镀镍电流7 5mA,镀镍时间分别为2min、15min、30min、45min或60min;对镀镍基板再进行蚀刻(蚀刻电流7 5mA,蚀刻时间2min)或用氨水浸泡处理(含NH325%,超声振荡30min),然后烘干备用。1 …     

Hydrogen confined in single-wall carbon nanotubes: Anisotropy effects on ro-vibrational quantum levels

The energy levels of a hydrogen molecule embedded in the cavity of single-walled carbon nanotubes with different morphologies are studied using quantum dynamics simulations. All degrees of freedom of the confined molecule are explicitly included in our model, revealing that the vibrational motion is notably affected by the presence of a confining potential. The most relevant effects are nevertheless found in the rotational motion of the molecule and the appearance of a quantized translational motion. We further analyze the dependence of the confinement effects on the interaction potential, considering different parameters for the carbon-hydrogen interaction.     

The preparation of functionalized single walled carbon nanotubes as high efficiency DNA carriers

The positively charged single walled carbon nanotubes (SWNTs~ ) were prepared by conjugating with-CONH-C_6H_(12)-NH_3~ . The double strand DNA(dsDNA) chains were loaded onto SWNTs~ via the electrostatic interactions.SWNTs~ shows improved loading efficiency (353.5μg/mg) toward dsDNA compared with that of charged free single walled carbon nanotubes (SWNTs) (82.9μg/mg).     

Covalent modification of multiwalled carbon nanotubes with a low molecular weight chitosan

Covalent modification of shortened multiwalled carbon nanotubes (MWNTs) with a natural low molecular weight chitosan (LMCS) was accomplished by the nucleophilic substitution reaction. The LMCS modified MWNTs (MWNT-LMCS) were characterized by FTIR, solid-state 13C NMR, and XPS spectroscopies, thermogravimetric analysis, and transmission electron microscopy. The results revealed that amino and primary hydroxyl groups of the LMCS participated mainly in the formation of the MWNT-LMCS conjugates. The MWNT-LMCS consists of 58 wt.% LMCS, and about four molecular chains of the LMCS were attached to 1000 carbon atoms of the nanotube sidewalls. As a novel derivative of the MWNTs, the MWNT-LMCS not only solved in DMF, DMAc and DMSO, but also in aqueous acetic acid solution.     

Soluble carbon nanotubes

Carbon nanotubes have attracted great interdisciplinary interest because of their unique structure and properties. However, carbon-nanotube research is challenged by several problems, such as: i) mass production of material, ii) control of length, diameter, and chirality, and iii) manipulation for use in diverse technological fields. Issues regarding the synthesis and purification as well as the functionalization and solubilization of carbon nanotubes are relevant topics in this rapidly growing field. In this paper, covalent and noncovalent approaches to functionalized and solubilized nanotubes are examined in detail, with particular emphasis on the change of properties that accompany the chemical modification.     

A novel density-tunable nanocomposites of CdTe quantum dots linked to dendrimer-tethered multi-wall carbon nanotubes

A novel nanocomposite of CdTe–PAMAM–MWNT was synthesized by covalently linking CdTe quantum dots (QDs) onto highly water-soluble multi-wall carbon nanotubes (MWNTs) functionalized with dendritic poly(amidoamine) (PAMAM). The IR, UV–vis and TEM methods has been used for the characterization of the composites. A facile method for controlling the density of QDs in the composite by simply changing the ratio of CdTe QDs/PAMAM–MWNT, as was verified by the TEM images. The experiments revealed that PAMAM and PAMAM–MWNT, once covalently linked with CdTe QDs, had remarkable effect on their fluorescence property. The fluorescence intensity of the CdTe–PAMAM hybrid was substantially enhanced as a compared to that of QDs, and the fluorescence was quenched greatly when QDs reacted with PAMAM–MWNT. The experimentally observed phenomena indicate that electron and energy transfer took place efficiently between CdTe QDs, PAMAM and MWNTs in the novel composite. These nanocomposits might hold great potential in photoelectron device and biotechnology applications.     

Alignment of carbon nanotubes under low magnetic fields through attachment of magnetic nanoparticles

The alignment of multiwalled carbon nanotubes (MWNTs) has been accomplished through deposition of uniform layers of magnetite/maghemite nanoparticles (diameter = 6-10 nm) and use of an external magnetic field. The coating of CNTs with magnetic nanoparticles was performed by combining the polymer wrapping and layer-by-layer (LbL) assembly techniques. The particle-coated MWNTs are superparamagnetic and can be aligned at room temperature on any substrate by deposition from an aqueous solution in an external field B = 0.2 T. The volume magnetization of the particle coated MWNTs is found to be enhanced by 17% compared to the pure particles in a powder indicating that either the adsorption process onto the CNTs changes the particle magnetization, or the MWNTs carry an intrinsic magnetization due to remaining Ni used as a catalyst for the growth process.     

Transition-metal-catalyzed unzipping of single-walled carbon nanotubes into narrow graphene nanoribbons at low temperature

Open, sesame! Graphene nanoribbons (GNRs) with smooth edges and controllable widths are crucial for graphene electronic and spintronic applications. High-quality narrow GNRs can be synthesized from single-walled carbon nanotubes at 200-300?°C using a Cu-atom catalyst, which dramatically reduces the energy barrier of unzipping from 3.11 to 1.16?eV.