Liquid crystalline conjugated polymers and their applications in organic electronics

This article describes the syntheses and electro‐optical applications of liquid crystalline (LC) conjugated polymers, for example, poly(p‐phenylenevinylene), polyfluorene, polythiophene, and other conjugated polymers. The polymerization involves several mechanisms: the Gilch route, Heck coupling, or Knoevenagel condensation for poly(p‐phenylenevinylene)s, the Suzuki‐ or Yamamoto‐coupling reaction for polyfluorenes, and miscellaneous coupling reactions for other conjugated polymers. These LC conjugated polymers are classified into two types: conjugated main chain polymers with long alkyl side chains, namely main‐chain type LC polymers, and conjugated polymers grafting with mesogenic side groups, namely side‐chain type LC conjugated polymers. In general, the former shows higher transition temperature and only nematic phase; the latter possesses lower transition temperature and more mesophases, for example, smectic and nematic phases, depending on the structure of mesogenic side chains. The fully conjugated main chain promises them as good candidates for polarized electroluminescent or field‐effect devices. The polarized emission can be obtained by surface rubbing or thermal annealing in liquid crystalline phase, with maximum dichroic ratio more than 20. In addition, conjugated oligomers with LC properties are also included and discussed in this article. Several oligo‐fluorene derivatives show outstanding polarized emission properties and potential use in LCD backlight application. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2713–2733, 2009     

Cross-Dehydrogenative Coupling Polymerization via C−H Activation for the Synthesis of Conjugated Polymers

Owing to their versatile (opto)electronic properties, conjugated polymers have found application in several organic electronic devices. Cross-coupling reactions such as Stille, Suzuki, Kumada couplings, and direct arylation reactions have proved to be effective for their synthesis. More atom-efficient oxidative direct arylation polymerization has also been reported for making homopolymers. However, growing interest toward donor-acceptor polymers has led to the recent emergence of cross-dehydrogenative coupling (CDC) polymerization to synthesize alternating copolymers without any prefunctionalization of monomers. Metal-catalyzed cross-coupling of two simple arenes via double C−H activation, or of an arene with an alkene via oxidative Heck-type reaction have been used so far for CDC polymerization. In this article, we discuss the development of CDC polymerization protocols along with the relevant small molecule CDC reactions for an improved understanding of these reactions.     

Vapor phase oxidative synthesis of conjugated polymers and applications

Since their discovery, electrically conductive polymers have gained immense interest both in the fields of basic and applied research. Despite their vast potential in the fabrication of efficient, flexible, and low‐cost electronic and optoelectronic devices, they are often difficult to process by wet‐chemical methods due to their very low to poor solubility in organic solvents. The use of vapor‐based synthetic routes, in which conductive polymers can be synthesized and deposited as a thin film directly on a substrate from the vapor phase, provides many unique advantages. This article discusses oxidative vapor deposition processes, primarily vapor phase polymerization and oxidative chemical vapor deposition, of conjugated polymers and their applications. The mild operating conditions (near room temperature processing) allow conformal and functional coatings of conjugated polymers on delicate substrates. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Comparison of "polynaphthalenes" prepared by two mechanistically distinct routes

The Bergman cyclization has long been known to produce polymers as side products. More recently, this attribute has been harnessed for the production of conjugated materials. However, the structures of these polymers have not been established. To resolve this question, the metal-catalyzed polymerization of 1,4-dibromonaphthalene and thermal polymerization of o-diethynylbenzene were conducted. Two distinct polymers were obtained. Comparison of IR spectroscopy, MALDI-TOF MS, solid-state NMR spectroscopy, UV-vis reflectance spectroscopy, and pyrolysis GC-MS data indicates that only one of the polymers is consistent with poly(1,4-naphthalene).     

Rhodium‐Catalyzed Stitching Polymerization of 1,5‐Hexadiynes and Related Oligoalkynes

A new mode of polymerization, rhodium‐catalyzed stitching polymerization, has been developed for the synthesis of π‐conjugated polymers with bridged repeating units from nonconjugated 1,5‐hexadiynes containing both terminal and internal alkyne moieties as monomers. The polymerization proceeded smoothly with a high degree of stitching efficiency under mild conditions, and 1,5,9‐decatriyne and 1,5,9,13‐tetradecatetrayne monomers could also be employed. The present polymerization strategy would be particularly beneficial for the synthesis of polymers consisting of a repeating unit that is difficult to prepare as a stable monomer because it does not require the use of a preformed bridged π‐conjugated monomer.     

Palladium-catalyzed cycloaromatization polymerization of enediynes

Bergman cyclization has shown great promise in constructing conjugated polymers.However,the application of this reaction in polymer science is still limited due to the harsh reaction condition and ill-defined structure of the achieved polymers.To this end,the cycloaromatization polymerization of enediynes catalyzed by a series of transition metal catalysts is investigated in this work,by taking advantage of the coordination chemistry of the enediyne with the transition metal complexes.According to the nuclear magnetic resonance (NMR),Fourier transform infrared (FTIR),ultraviolet-visble (UV-Vis) spectroscopies and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis,the cycloaromatization polymerization of enediynes proceeds under milder conditions and in a more controlled manner in the presence of palladium(Ⅱ) complexes,giving structurally regulated conjugated polymers in high yields.     

Synthesis of Conjugated Polymers via Transition Metal Catalysed C−H Bond Activation

Transition metal catalysed C−H bond activation chemistry has emerged as an exciting and promising approach in organic synthesis. This allows us to synthesize a wider range of functional molecules and conjugated polymers in a more convenient and more atom economical way. The formation of C−C bonds in the construction of pi-conjugated systems, particularly for conjugated polymers, has benefited much from the advances in C−H bond activation chemistry. Compared to conventional transition-metal catalysed cross-coupling polymerization such as Suzuki and Stille cross-coupling, pre-functionalization of aromatic monomers, such as halogenation, borylation and stannylation, is no longer required for direct arylation polymerization (DArP), which involve C−H/C−X cross-coupling, and oxidative direct arylation polymerization (Ox-DArP), which involves C−H/C−H cross-coupling protocols driven by the activation of monomers’ C(sp²)−H bonds. Furthermore, poly(annulation) via C−H bond activation chemistry leads to the formation of unique pi-conjugated moieties as part of the polymeric backbone. This review thus summarises advances to date in the synthesis of conjugated polymers utilizing transition metal catalysed C−H bond activation chemistry. A variety of conjugated polymers via DArP including poly(thiophene), thieno[3,4-c]pyrrole-4,6-dione)-containing, fluorenyl-containing, benzothiadiazole-containing and diketopyrrolopyrrole-containing copolymers, were summarized. Conjugated polymers obtained through Ox-DArP were outlined and compared. Furthermore, poly(annulation) using transition metal catalysed C−H bond activation chemistry was also reviewed. In the last part of this review, difficulties and perspective to make use of transition metal catalysed C−H activation polymerization to prepare conjugated polymers were discussed and commented.     

Effects of the local magnetic fields of paramagnetic particles on chemical reactions

Effects on reactivity from local magnetic fields are considered for conjugated monomers and polymers containing paramagnetic centers. The local activation effect is discussed in phenomenological terms in relation to complexes formed with diamagnetic reagents; results are given for the low-temperature pyrolysis of anthracene, the thermal polymerization of pyridine and quinoline on zinc chloride, interactions with conjugated free-radical systems (including diphenylpicrylhydrazyl DPPH), inhibition of thermal oxidation, and thermal polymerization of tetracyanoethylene.     

Synthesis of dendronized polymers through bergman cyclization of enediyne‐containing Frechet‐type dendrimers

In this article, dendronized polymers with rigid backbones were synthesized from enediyne‐containing Frechet‐type dendrimers. Two generations of dendrimers were conically incorporated with 3‐(2‐(2‐(trimethylsilyl)ethynyl)phenyl)prop‐2‐yn‐1‐ol. The trimethylsilyl protection groups of enediyne units were subsequently removed, and two types of brush polymers with rigid conjugated backbone were prepared through Bergman cyclization polymerization at elevated temperature under vacuum. The dendronized polymers were characterized with GPC, IR, UV–vis, and NMR spectroscopy. Furthermore, the morphology of the dendronized polymer was revealed by atomic force microscopy. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Optimization of direct arylation polymerization (DArP) through the identification and control of defects in polymer structure

As a newly emerged protocol for the synthesis of conjugated polymers, direct arylation polymerization (DArP) is an environmentally friendly and cost-effective alternative to traditional methods of polymerization. DArP efficiently yields conjugated polymers with high yield and high molecular weight. However, DArP is also known to produce defects in polymer chemical structure. Together with molecular weight and polydispersity, these defects are considered to be important parameters of polymer structure and they have a strong impact on optical, electronic and thermal properties of conjugated polymers. The four major classes of conjugated polymer defects inherent for DArP have been identified: homocoupling regiodefects, branching defects, end group defects, and residual metal defects. To have a precise control over the polymer properties, it is important to understand what causes the defects to form during the polymerization process and be able to control their content. Here within the scope of current literature, we discuss in detail the definition and origin of all these defects, their influence on polymer properties and effective means to control the defects through fine tuning of the DArP reaction parameters. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 135–147     

Narrowly-Distributed Conjugated Polymers Synthesized through Suzuki Polymerization with Palladium(II) N-Heterocyclic Carbene Complex Confined in Dendritic Mesoporous Silica Nanoparticles

A catalytic heterogenous Suzuki polymerization method was developed by confining the Pd(II)-catalyzed cross coupling reactions to take place exclusively in the nanochannels of dendritic mesoporous silica nanoparticles. Conjugated polymers with various monomer combinations, including donor-acceptor structures, were obtained in high yields. The molecular weights of the obtained polymers were well controlled with narrow molecular weight distributions (PDI value down to 1.13). All the polymeric products were highly soluble in common organic solvents, granting them with high processability. All the features of this confined Suzuki polymerization method endow the conjugated polymers great potential in optoelectronic applications.     

A versatile method for cyclic polymers from conjugated and unconjugated vinyl monomers

A versatile method was introduced to prepare cyclic polymers from both conjugated and unconjugated vinyl monomers. It was developed on the combination of the RAFT polymerization and the self‐accelerating double strain‐promoted azide‐alkyne click (DSPAAC) reaction. In this approach, a switchable chain transfer agent 1 was designed to have hydroxyl terminals and a functional pyridinyl group. The protonation and deprotonation of pyridinyl group endowed the chain transfer agent 1 with a switchable control capability to RAFT polymerization of both conjugated and unconjugated vinyl monomers. Based on this, RAFT polymerization and the following hydroxyl end group modification were used to prepare various azide‐terminated linear polymers including polystyrene, poly(N‐vinylcarbazole), and polystyrene‐block‐poly(N‐vinylcarbazole). Using sym‐dibenzo‐1,5‐cyclooctadiene‐3,7‐diyne (DBA) as small linkers, the corresponding cyclic polymers were then prepared via the DSPAAC reaction between DBA and azide terminals of the linear precursors. Due to the self‐accelerating property of DSPAAC reaction, this bimolecular ring‐closing reaction could efficiently produce the pure cyclic polymers using excess molar amounts of DBA to linear polymer precursors. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1811–1820     

Hydrothermal Generation of Conjugated Polymers Using the Example of Pyrrone Polymers and Polybenzimidazoles

Various polyimides and polyamides have recently been prepared via hydrothermal synthesis in nothing but H₂O under high‐pressure and high‐temperature conditions. However, none of the prepared polymers feature a truly conjugated polymer backbone. Here, we report on an expansion of the synthetic scope of this straightforward and inherently environmentally friendly polymerization technique to the generation of conjugated polymers. Selected representatives of two different polymer classes, pyrrone polymers and polybenzimidazoles, were generated hydrothermally. We present a mechanistic discussion of the polymer formation process as well as an electrochemical characterization of the most promising product.     

Fluorescence Study of Energy Transfer in PMMA Polymers with Pendant Oligo‐Phenylene‐Ethynylenes

A spectroscopic characterization of polymers containing rigid π‐conjugated oligo(phenyleneethynylene) chromophores as well as oligo(phenyleneethynylene) and methyl methacrylate is presented. The polymers exhibit molar masses of up to 15 000 g mol^?1 and a degree of polymerization between 22 and 80. Emission measurements of the monomeric and polymeric species show that radiative as well as nonradiative rates are influenced by the degree of polymerization due to intramolecular interactions of chromophores pendant to the polymer backbone. Time‐resolved emission anisotropy measurements suggest that energy migrates within the polymers. Steady‐state emission anisotropy measurements also point to energy migration. Additionally, two oligo(phenyleneethynylene)s with different sizes of the conjugated system are copolymerized in order to enable energy trapping due to energy transfer. The shortened energy‐donor fluorescence lifetime within the donor–acceptor copolymers suggest energy transfer. Depending on the degree of polymerization, dispersion of the donor fluorescence lifetime is observed.     

Highly versatile organostibine mediators for living radical polymerization

A new versatile method for conducting living radical polymerization has been developed in which organostibines induce consecutive group-transfer radical reactions with alkenes. The method has been successfully applied, for the first time, to the controlled polymerization of both conjugated and unconjugated vinyl monomers, and the desired polymers with predetermined molecular weight and low polydispersity index were obtained in excellent yields. This characteristic feature of this method is exemplified in the first synthesis of block copolymers composed of conjugated and unconjugated monomers, which would be of great importance as functional smart organic nanomaterials.     

Side-chain engineering of high-efficiency conjugated polymer photovoltaic materials

In recent years,conjugated polymers have attracted great attention in the application as photovoltaic donor materials in polymer solar cells(PSCs).Broad absorption,lower-energy bandgap,higher hole mobility,relatively lower HOMO energy levels,and higher solubility are important for the conjugated polymer donor materials to achieve high photovoltaic performance.Side-chain engineering plays a very important role in optimizing the physicochemical properties of the conjugated polymers.In this article,we review recent progress on the side-chain engineering of conjugated polymer donor materials,including the optimization of flexible side-chains for balancing solubility and intermolecular packing(aggregation),electron-withdrawing substituents for lowering HOMO energy levels,and two-dimension(2D)-conjugated polymers with conjugated side-chains for broadening absorption and enhancing hole mobility.After the molecular structural optimization by side-chain engineering,the2D-conjugated polymers based on benzodithiophene units demonstrated the best photovoltaic performance,with powerconversion efficiency higher than 9%.     

Synthesis,properties and molecular modeling of functional hyperbranched polymers and dendrimers

The design, synthesis, properties and molecular modeling of fully conjugated dendritic molecules and conjugated hyperbranched polymers are described. It has been shown that conjugated hyperbranched molecules are much more soluble than their linear analogues while maintaining all the properties characteristic of conjugated polymers. It was found that the use of polymeric solid support in hyperbranched polymerization allows to control molecular weight and degree of branching (DB). The molecular modeling of hyperbranched conjugated molecules reveals that hyperbranched structure of conjugated molecules affects significantly neither their stability nor the conjugation. On the other hand the terminal groups affect appreciably the electronic structure of conjugated hyperbranched molecules.     

The polymerization of 3-chloro-1-propyne and 3-bromo-1-propyne with Mocl5 and WCL6 based initiators and the structure of the resulting polymers

The WCl₆ and MoCl₅ initiated polymerizations of 3-chloro-1-propyne and 3-bromo-1-propyne were performed in both halogenated and aliphatic non-nucleophilic and in aromatic nucleophilic solvents. The structure of the obtained polymers suggested that the polymerization reaction occurs in two steps. In both nucleophilic and non-nucleophilic solvents, the first step consists of the metathesis polymerization of 3-chloro(bromo)-1-propyne followed by electrophilic cis–trans isomerization leading to polymers containing trans-cisoidal allyl chloride or bromide structural units. When the polymerization is performed in non-nucleophilic solvents, in the second step an intramolecular electrophilic addition followed by elimination takes place. The resulting polymers contain a highly conjugated cyclopentadiene ladder structure. When the polymerization is performed in nucleophilic aromatic solvents, the intramolecular electrophilic addition competes with the electrophilic substitution of the solvent resulting in polymers containing high concentrations of arylpropenyl structural units. Subsequently, depending on the nucleophilicity of the polymerization solvent, the polymer structure contains structural units based on cyclopentadiene and/or arylpropenyl groups.     

Living polymerization of substituted acetylenes

For many years, considerable research efforts have been dedicated to π‐conjugated polymers because of their extraordinary electronic, optical, and structural properties. The employed transition‐metal‐based initiating systems comprise not only simple transition‐metal salts but also rather sophisticated mixtures of two, three, or four compounds and even highly defined single‐component systems such as transition‐metal alkylidene complexes. Extensive fine‐tuning of the electronic and steric properties of initiator–monomer systems eventually allowed the tailor‐made synthesis of conjugated materials via living polymerization techniques. This article focuses on recent developments in the field of the living polymerization of substituted acetylene derivatives. Ill‐defined group 5 and 6 transition metal halide‐based initiators, well‐defined transition‐metal alkylidene complexes, and rhodium(I)‐based systems that induce the living polymerization of numerous substituted acetylenes are reviewed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5723–5747, 2005     

Bio‐Based Polyketones by Selective Ring‐Opening Radical Polymerization of α‐Pinene‐Derived Pinocarvone

The most abundant naturally occurring terpene, α‐pinene, which cannot be directly polymerized into high polymers by any polymerization method, was quantitatively converted under visible‐light irradiation into pinocarvone, which possesses a reactive exo methylene group. The bicyclic vinyl ketone was quantitatively polymerized in fluoroalcohols by selective (99 %) ring‐opening radical polymerization of the four‐membered ring, which results in unique polymers containing chiral six‐membered rings with conjugated ketone units in the main chain. These polymers display good thermal properties, optical activities, and contain reactive conjugated ketone units. Reversible addition fragmentation chain transfer (RAFT) polymerization was successfully accomplished by using appropriate trithiocarbonate RAFT agents, enabling the synthesis of thermoplastic elastomers based on controlled macromolecular architectures.