Fast synthesis of ZnO nanostructures by laser-induced decomposition of zinc acetylacetonate

A CO2 laser (lambda = 10.6 microm) was used to heat a solution of water and alcohol saturated by Zn(AcAc)2 on a fused quartz substrate in open air. After only a few seconds of irradiation, various zinc oxide (ZnO) nanostructures including nanorods and nanowires are formed near the center of the irradiated zone, surrounded by a porous thin film of ZnO nanoparticles. The type of structures produced and their localization on the substrate can be varied by selecting adequate irradiation time and laser power ranges. The deposits have been analyzed using SEM, TEM, EDS, XRD, and Raman spectroscopy, revealing that the nanorods (aspect ratio ~6) and nanowires (aspect ratio ~94) are single-crystalline structures which grow along the c axis of wurtzite ZnO. The nanoparticles are also single-crystalline and have an average diameter of 16 nm. A qualitative model for nanostructure growth is proposed, based on previous studies of aqueous solution and hydrothermal processing.     

Theory for optical assembling of anisotropic nanoparticles by tailored light fields under thermal fluctuations

In order to evaluate the assembling processes of arbitrary-shaped nanoparticles (NPs) by the irradiation of a tailored laser beam under thermal fluctuations, we have developed a “Light-induced-force Nano Metropolis Method (LNMM)” as a new theoretical method based on the stochastic algorithm in the energy region and the general formula of light-induced force. By using LNMM, we have investigated the change of configurations of silver NPs with anisotropic shapes under the irradiation of laser beams with various polarizations and intensity distributions (Gaussian beam and axially-symmetric vector beams) in an aqueous solution at room temperature. As a result, it has been clarified that silver NPs can be selectively arranged into a characteristic spatial configuration reflecting the properties of an irradiated laser beam (wavelength, intensity distribution, and polarization distribution), and that the assembled structures possess broadband spectra and exhibit a strong optical response to the irradiated laser beam through the optimization with the help of fluctuations.     

Tuning the morphology of ZnO nanoparticles by Zn-clusters and application on the photoreduction of Cr(VI)

The ZnO nanoparticles in a uniformed size have been applied as the photocatalysts over the reduction of Cr(VI). The morphologies of the ZnO nanoparticles are decided by the cluster type of mother sample Zn-MOFs, which are prepared with the same bi-ligands 1,3,5-benzenetricarboxylic acid (H3BTC) and phenanthroline (phen) in the presence of Zn ions. The SEM, TEM, infrared spectroscopy, thermogravimetric analysis and UV–vis study reveal the physical properties and structural information of ZnO nanoparticles. The reduction rate of Cr(VI) under the UV light irradiation indicates that the ZnO nanoparticles have higher activities with promoting reduction rate comparing with the related Zn-MOFs. The test of photocurrent approves the reduction ability of each sample.     

Photochemical Synthesis,Spectral-Optical and Electrophysical Properties of Composite Nanoparticles of ZnO/Ag

The photochemical synthesis of nanoparticles of ZnO/Ag in isopropanol solutions has been carried out. Their optical properties have been studied and the parameters of the plasma resonance of the nanoparticles of silver in the ZnO/Ag composites have been calculated. It has been established that the hypsochromic shift of the plasma band of silver observed on irradiation of the nanocomposite is a result of accumulation of excess electrons on the ZnO/Ag particles which leads to equalization of the potentials of the conductions zones of the semiconductor and the metallic components of the nanocomposite.     

Investigating the effect of ultrasonic irradiation on preparation and properties of conductive nanocomposites

In the present study, the ultrasonic irradiation technique was employed as a new approach to prepare 0-3-dimensional polyaniline/ZnO shell-core composite particles. By taking advantage of the multiple effects of ultrasound, one can break down the aggregates of nanocrystalline ZnO particles. The polymerization of aniline proceeded while the nanoparticles were redispersed by ultrasound, and the synthesized polyaniline deposited on the ZnO particle, which formed polyaniline-coated nanocrystalline composite particles. The material was characterized by using transmission electron microscopy, XRD, scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), and Thermogravimetric analysis (TGA). With increased ZnO content, the H-bonding interaction is strengthened and the characteristic peaks of benzoid and quinoid are shifted. X-ray photoelectron spectroscopy (XPS) shows that the ratio of the number of Zn and N atoms (Zn/N) on the surface is lower than that in the bulk. This is strong evidence for a PANI-encapsulated ZnO nanoparticles structure. The conductivity of the composites obtained through ultrasonic irradiation decreases with increasing ZnO content. Ultrasonic irradiation contributes to the increase in the conductivity compared with conventional stirring. Photocatalytic properties of PANI/ZnO nanocomposites were examined by degrading Reactive Black 5 (RB5) dye under visible light irradiation.     

Preparation of Polycarbonate-ZnO Nanocomposite Films: Surface Investigation after UV Irradiation

Polycarbonate (PC)-ZnO films with different percentages of ZnO were prepared by a solution stirring technique and subjected to ultraviolet (UV; λ = 254 nm) irradiation. Structural parameters of the samples and the effects of UV irradiation on the surface properties of the PC and PC-ZnO nanocomposites were evaluated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), water contact angle (WCA) measurements, and a Vickers microhardness (H_V) tester. The XRD patterns of the nanocomposite films were found to show an increase in crystallinity with the increasing ZnO nanoparticles percentage. The WCA was found to be reduced from 90° to 17° after 15 h of UV irradiation, which could be ascribed to the oxidation of the surface of the samples during the irradiation and exposure of the ZnO nanoparticles, a result that is also supported by the obtained XPS data. The microhardness value of the PC-ZnO films including 30 wt.% ZnO enhanced considerably after UV radiation, which can also be attributed to the exposition of the ZnO nanoparticles after photodegradation of the PC superficial layer of the nanocomposite films.     

Electronic and vibrational spectra of some rare earth trifluoromethanesulfonates crystals

Nanocrystalline ZnO powders have been synthesized by a low temperature solution combustion method. The photoluminescence (PL) spectrum of as-formed and heat treated ZnO shows strong violet (402, 421, 437, 485 nm) and weak green (520 nm) emission peaks respectively. The PL intensities of defect related emission bands decrease with calcinations temperature indicating the decrease of Zn(i) and V(o)(+) caused by the chemisorptions of oxygen. The results are correlated with the electron paramagnetic resonance (EPR) studies. Thermoluminescence (TL) glow curves of gamma irradiated ZnO nanoparticles exhibit a single broad glow peak at ～343°C. This can be attributed to the recombination of charge carriers released from the surface states associated with oxygen defects, mainly interstitial oxygen ion centers. The trapping parameters of ZnO irradiated with various γ-doses are calculated using peak shape method. It is observed that the glow peak intensity increases with increase of gamma dose without changing glow curve shape. These two characteristic properties such as TL intensity increases with gamma dose and simple glow curve structure is an indication that the synthesized ZnO nanoparticles might be used as good TL dosimeter for high temperature application.     

Controlled orientation in a bio-inspired assembly of Ag/AgCl/ZnO nanostructures enables enhancement in visible-light-induced photocatalytic performance

In a bio-inspired approach, polyamine-mediated mineralization of ZnO was explored to develop an environmentally benign methodology for synthesizing Ag/AgCl/ZnO nanostructures. The assembling properties displayed by the polyamines to create composite structures was utilized to have the nanocomponents effectively interact with each other in a way that is desirable for the application envisaged. The polyamines, which act as a mineralizing agent for ZnO nanoparticles, also facilitate the formation of Ag/AgCl within ZnO under ambient conditions. Thus synthesized Ag/AgCl/ZnO nanostructures represent a multi-heterojunction system in which the nanocomponents lead in a synergistic way to enhancement in the photocatalytic activity under visible-light irradiation.     

Enhanced photocatalytic activity of ZnO nanoparticles by surface modification with KF using thermal shock method

ZnO nanoparticles were modified with KF using thermal shock method at various temperatures in order to improve the photocatalytic activity of ZnO under both UVA and visible light irradiation. The influences of KF-modification on the crystal structure, morphology, UV–visible absorption, specific surface area as well as surface structure of ZnO were respectively characterized by XRD, FE-SEM, UV–Visible diffuse reflectance, N₂ adsorption and XPS spectroscopy. The photocatalytic activity was evaluated via the degradation of methylene blue under UVA irradiation. According to the results, the thermal shock process with KF did not modify the structure, the particle size and the optical properties of ZnO nanoparticles but successfully increase their UVA and visible light induced photocatalytic activity. This enhancement of activity may be attributed to the increase of surface hydroxyl groups and zinc vacancies of modified ZnO samples.     

Controlled Orientation in a Bio‐Inspired Assembly of Ag/AgCl/ZnO Nanostructures Enables Enhancement in Visible‐Light‐Induced Photocatalytic Performance

In a bio‐inspired approach, polyamine‐mediated mineralization of ZnO was explored to develop an environmentally benign methodology for synthesizing Ag/AgCl/ZnO nanostructures. The assembling properties displayed by the polyamines to create composite structures was utilized to have the nanocomponents effectively interact with each other in a way that is desirable for the application envisaged. The polyamines, which act as a mineralizing agent for ZnO nanoparticles, also facilitate the formation of Ag/AgCl within ZnO under ambient conditions. Thus synthesized Ag/AgCl/ZnO nanostructures represent a multi‐heterojunction system in which the nanocomponents lead in a synergistic way to enhancement in the photocatalytic activity under visible‐light irradiation.     

Antibacterial and Photocatalytic Properties of ZnO Nanoparticles Obtained from Chemical versus Saponaria officinalis Extract-Mediated Synthesis

In the present work, the properties of ZnO nanoparticles obtained using an eco-friendly synthesis (biomediated methods in microwave irradiation) were studied. Saponaria officinalis extracts were used as both reducing and capping agents in the green nanochemistry synthesis of ZnO. Inorganic zinc oxide nanopowders were successfully prepared by a modified hydrothermal method and plant extract-mediated method. The influence of microwave irradiation was studied in both cases. The size, composition, crystallinity and morphology of inorganic nanoparticles (NPs) were investigated using dynamic light scattering (DLS), powder X-ray diffraction (XRD), SEM-EDX microscopy. Tunings of the nanochemistry reaction conditions (Zn precursor, structuring agent), ZnO NPs with various shapes were obtained, from quasi-spherical to flower-like. The optical properties and photocatalytic activity (degradation of methylene blue as model compound) were also investigated. ZnO nanopowders’ antibacterial activity was tested against Gram-positive and Gram-negative bacterial strains to evidence the influence of the vegetal extract-mediated synthesis on the biological activity.     

Microstructure control of Zn/ZnO core/shell nanoparticles and their temperature-dependent blue emissions

The microstructure of the Zn/ZnO core/shell nanoparticles synthesized by laser ablation in liquid medium can be facilely controlled. With the surfactant concentration increased over the critical micelle concentration, the nanoparticle transformed from pure ZnO to a Zn/ZnO core/shell structure. Further, with a decrease of the applied laser power, the ZnO shell thickness was monotonously reduced till 2.5 nm and the ultrafine ZnO nanocrystals embedded in the nanoshells were also reduced till 1.5 nm, which induced the increase of the disorder degree of the nanoshell lattice. The controlling mechanism was discussed according to the competition of capping protection and the oxidation reaction of laser-induced plasma. Blue photoluminescence from the ZnO nanoshells was observed. The emission band exhibited abnormal red-blue shift and narrowing with increasing temperature. Such temperature-dependent behaviors can be well described by a localization model involving an interstitial zinc defect center. These results indicate that this method provides a convenient and universal way to obtain various metal/oxide core/shell nanoparticles with controllable microstructure, and it will be beneficial to an understanding of the physical origins of the blue emission in nanostructured ZnO as well as to extending its optical and electronic applications.     

Synthesis, characterization and antimicrobial investigation of mechanochemically processed silver doped ZnO nanoparticles

The application of nanomaterials has gained considerable momentum in various fields in recent years due to their high reactivity, excellent surface properties and quantum effects in the nanometer range. The properties of zinc oxide (ZnO) vary with its crystallite size or particle size and often nanocrystalline ZnO is seen to exhibit superior physical and chemical properties due to their higher surface area and modified electronic structure. ZnO nanoparticles are reported to exhibit strong bacterial inhibiting activity and silver (Ag) has been extensively used for its antimicrobial properties since ages. In this study, Ag doped ZnO nanoparticles were synthesized by mechanochemical processing in a high energy ball mill and investigated for antimicrobial activity. The nanocrystalline nature of zinc oxide was established by X-ray diffraction (XRD) studies. It is seen from the XRD data obtained from the samples, that crystallite size of the zinc oxide nanoparticles is seen to decrease with increasing Ag addition. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) data also supported the nanoparticle formation during the synthesis. The doped nanoparticles were subjected to antimicrobial investigation and found that both increase in Ag content and decrease in particle size contributed significantly towards antimicrobial efficiency. It was also observed that Ag doped ZnO nanoparticles possess enhanced antimicrobial potential than that of virgin ZnO against the studied microorganisms of Escherichia coli and Staphylococcus aureus.     

不同形貌ZnO纳米粒子的超声化学法制备与表征

One-dimensional ZnO nanorods and shuttle-like ZnO nanoparticles have been successfully achieved by ultrasonic irradiation of Zn (CH3COO)2 aqueous solution and Zn-NH3 complexcs solution. The obtained ZnO nanoparticles have been characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM) and selected area electronic diffraction (SAED). And the formative mechanism of the prepared different morphological ZnO nanoparticles is also discussed under ultrasonic irradiation.     

Enhanced luminescence of SiO2:Eu3+ by energy transfer from ZnO nanoparticles

ZnO nanoparticles embedded into SiO(2) by an ex situ method were shown to result in stable green emission with a peak at 510 nm compared to the normal peak at 495 nm from micron-sized ZnO powders. Green emission from ZnO nanoparticles was completely suppressed when they were embedded in SiO2 doped with Eu3+. Instead, the f-f emissions from Eu3+ were enhanced 5-10 times by energy transfer from the embedded ZnO nanoparticles to Eu3+. The Eu3+ luminescence increased as the Eu3+ concentration increased from 1 vs 5 mole % (for 10 mole % ZnO). In addition, the intensity increased as the embedded ZnO nanoparticles concentration increased up to 10 mole % (for 5 mole % Eu3+). The effects of phonon mediated energy transfer, quenching by activator interactions between Eu3+ ions, and energy back-transfer from Eu3+ ions to ZnO nanoparticles were discussed.     

Effects of mechanical activation on structure and photocatalytic properties of ZnO powders

Zinc oxide (ZnO) was mechanically activated in air using a planetary ball mill using varying milling speeds and time. The obtained samples were analyzed by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and UV-Vis diffusion reflectance spectroscopy. The photocatalytic activity of the mechanically treated ZnO powders were investigated in the reaction of Malachite Green (MG) degradation in aqueous solution under UV-light irradiation. A decrease in the crystallite size (from 90 to 10 nm) accompanied by an increase of microstrains and lattice parameters were established applying different milling speeds. The agglomeration of the particles was observed by SEM analysis. The absorption spectra of the initial and mechanically activated ZnO samples show shifting of the band position from 360 to 330 nm, which can be related to decrease in the crystalline size. The ZnO powders activated at lower milling speeds (for shorter time intervals) exhibit highest photocatalytic activity.      

Preparation, characterization, and photocatalytic activity of polyaniline/ZnO nanocomposite

Polyaniline (PANI)/zinc oxide (ZnO) nanocomposite was synthesized by in-situ polymerization. X-ray diffraction patterns, UV?Cvisible spectroscopy, SEM, and TEM were used to characterize the composition and structure of the nanocomposite. Nanostructured PANI/ZnO composite was used as photocatalyst in the photodegradation of methylene blue dye molecules in aqueous solution. The photocatalytic activity of PANI/ZnO nanocomposite under UV and visible light irradiation was evaluated and was compared with that of ZnO nanoparticles. ZnO/PANI core?Cshell nanocomposite had greater photocatalytic activity than ZnO nanoparticles and pristine PANI under visible light irradiation. According to these results, application of PANI as a shell on the surface of ZnO nanoparticles causes the enhanced photocatalytic activity of the PANI/ZnO nanocomposite. Also UV?Cvisible spectroscopy studies showed that the absorption peak for PANI/ZnO nanocomposite has a red shift toward visible wavelengths compared with the ZnO nanoparticles and pristine PANI. The effect of different operating conditions on the photocatalytic performance of PANI/ZnO nanocomposite in the photodegradation of methylene blue dye molecules was investigated in a bath experimental setup.     

Electrical,optical and photocatalytic properties of Ti-loaded ZnO/ZnO and Ti-loaded ZnO nanospheres

Ti-loaded ZnO and Ti-loaded ZnO/ZnO nanoparticles have been synthesized by sol–gel method and analyzed for photocatalyst application. The phase confirmation was analyzed by powder XRD and surface morphology with HR-SEM and EDAX spectrum. The particle size measured using HR-TEM and SAED pattern confirms the crystalline nature of Ti-loaded ZnO and Ti-loaded ZnO/ZnO nanoparticles. The optical properties were studied with UV–visible diffuse reflectance spectra. The DRS of Ti-loaded ZnO/ZnO nanoparticles are similar to those of pristine ZnO nanoparticles. The KM plots show both the synthesized Ti-loaded ZnO/ZnO and Ti-loaded ZnO exhibit in UV-A region. The electric properties are studied with impedance analyzer, and the results show the charge-transfer resistance of Ti-loaded ZnO/ZnO is larger than that of Ti-loaded ZnO nanoparticles. The photocatalytic activity was studied with methylene blue dye and phenol degradation by Ti-loaded ZnO/ZnO, Ti-loaded ZnO, TiO₂ and ZnO nanoparticles. The photocatalytic activity of Ti-loaded ZnO/ZnO nanospheres is slightly higher than that of other nanoparticles, which shows that they have excellent application as photocatalyst.     

Surface and interface study of ZnO nanoparticles modified by octadecanol phosphate

In this paper, we describe an effective method in which ZnO nanoparticles were prepared through the rapid precipitation transformation reaction in aqueous solution of ZnSO₄ and NaOH with octadecanol phosphate (ODP) as a modifying agent. From the study on the surface and the interface, ZnO nanoparticles modified by ODP exhibited small size, pore structure, good dispersion, and hydrophobicity. The wide variety of surface wettability can be achieved by changing the preparation parameters. The research offers a simple and effective approach to prepare ZnO filler in mild condition and enhances interfacial compatibility between ZnO powders and matrixes by treating the surface with certain capping molecules. Copyright © 2010 John Wiley & Sons, Ltd.     

The Optical Properties of ZnO Nanoparticles Capped with Polyvinyl Butyral

ZnO nanoparticles capped with polyvinyl butyral (PVB) have been synthesized by the sol-gel process. Photoluminescence (PL) spectra show a remarkable decrease in visible emission intensity after ZnO nanoparticles are capped with PVB, which indicates that dangling bonds and defect states at the surface of ZnO nanoparticles are markedly passivated. As a result, the process of surface-trapped hole tunneling back into the particles to form V**_O recombination center is blocked. The PL spectra of thin films show a strong ultraviolet (UV) emission with very weak visible emission. The typical intensity ratio of the UV emission at 3.45 eV to the visible emission at about 2.41 eV is 43.3, which shows an obvious improvement in luminescence properties by the surface passivation with PVB. Low-temperature PL spectra of ZnO powder at 93.8 K are dominated by free exciton, bound exciton and the LO-phonon replica of the bound exciton.