Study of the interaction of beta-cyclodextrin with phospholipid monolayers by surface pressure measurements and fluorescence microscopy

The interaction of beta-cyclodextrin (beta-CD) with different lipids has been studied, using Langmuir monolayers kept at constant surface pressure or constant spreading surface. Results show that beta-CD, injected beneath the monolayer, is able to desorb unsaturated palmitoyloleoylphosphatidylcholine (POPC) and sphingomyelin (SM) under specific experimental conditions. In this last case, SM monolayers, labeled with the fluorescent NBD-PC probe, were also observed by fluorescence microscopy, before and after beta-CD injection. Images show that SM monolayers are more homogeneous after beta-CD injection, because of the lipid desorption. At last, it seems that lipid desorption occurs only in a restricted surface pressure range, depending on the lipid.     

Savinase proteolysis of insulin Langmuir monolayers studied by surface pressure and surface potential measurements accompanied by atomic force microscopy (AFM) imaging

The mechanism of the enzymatic action of Savinase on an insulin substrate organized in a monolayer at the air-water interface was studied. We followed two steps experimental approach classical surface pressure and surface potential measurements in combination with atomic force microscopy imaging. Utilizing the barostat surface balance, the hydrolysis kinetic was followed by measuring simultaneously the decrease in the surface area and the change of the surface potential versus time. The decrease in the surface area is a result of the random scission of the peptide bonds of polypeptide chain, progressively appearance of amino acid residues, and their solubilization in the aqueous subphase. The interpretation of the surface potential data was based on the contribution of the dipole moments of the intact and broken peptide groups which remain at the interface during the proteolysis. An appropriate kinetic model for the Savinase action was applied, and the global kinetic constant was obtained. The application of the AFM revealed the state of the insulin monolayers before and after the Savinase action. The comparison of the topography of the films and the roughness analysis showed that insulin Langmuir-Blodgett (LB) films transferred before the enzyme action were flat, while at the end of hydrolysis, roughness of films has increased and the appearance of 3D structures was observed.     

Application of Brewster angle microscopy and fractal analysis in investigations of compressibility of Langmuir monolayers

The aim of this study was to investigate the connection between the lipid/amphiphile monolayer structure at the interface and its macroscopic/rheological properties, in particular, to establish the link between the fractality of the monolayer structure and its compressibility modulus. To that purpose we have used fractal analysis of images obtained by Brewster angle microscopy to infer the fractal dimension of the monolayer structure and relate its change to the corresponding changes in compressibility derived from a simultaneously measured π-A isotherm. The results of the study confirmed the starting assumption based on theoretical considerations that the fractal dimension of an amphiphilic monolayer and its compressibility should be correlated. We have shown that there exists a strong correlation between the fractal dimension and the corresponding compressibility modulus of different amphiphilic materials. Thus, confirming the link between the short ordered structure on the molecular level and the macroscopic property-compressibility of the monolayer. The established correlation between the fractal dynamics and compressibility modulus of the monolayer enabled identification of onset of percolation-a second-order phase transition that is otherwise not easy and unambiguously detectable. We have found that the signature of percolation in a monolayer, regardless of its composition, is the occurrence of a sharp increase (a jump) of compressibility modulus (at macroscopic level) at the characteristic value of the corresponding fractal dimension D = 1.89. This is the result of the abrupt establishment of a connected structure on the molecular level, consequently involving a change in the elastic properties of the monolayer on a macroscopic scale. The results of this investigation provide means for unambiguous identification of the onset of percolation in the Langmuir layer and should facilitate a more efficient application of the percolation theory in further study of processes and structures at the interface during the monolayer compression.     

Phospholipid foam films studied by contact angle measurements and fluorescence microscopy

 Foam films drawn from suspensions of the phospholipid 1,2-dimyristoyl-sn-glycero-3-phosphorylcholine (DMPC) in water/ethanol mixtures were used for the investigation of the relation between the properties of the monolayers and the interaction between the film surfaces. The film thickness and the contact angle between the film and the meniscus were measured as a function of the temperature in a range around the temperature of the main phase transition for the lipid. Additionally, fluorescence microscopy was applied to investigate the distribution of a fluorescent lipidlike dye in the surface of the film and the meniscus. From the contact angle the free energy of film formation was calculated. At the temperature of the chain-melting phase transition the film thickness decreases by 0.7 nm. This can be related to a decrease in the thickness of the hydrocarbon layers of the lipid monolayers at this temperature. The decrease in the film thickness leads to a reduction in the free energy by increasing the van der Waals attraction between the film surfaces. No structures were observed in the monolayers of the film in the fluorescence investigation. However, on formation of the very thin equilibrium film the dye was expelled from the film area, indicating an increase in the packing density of the lipid, if the monolayers are in adhesive contact in the film. Received: 31 January 2000 Accepted: 25 February 2000     

Appearance and disappearance of dendritic and chiral patterns in domains of Langmuir monolayers observed with Brewster angle microscopy

Investigations on the aggregation behavior and morphology of Langmuir films of enantiomeric (L) and racemic (DL) N-acyl amino acids on pure aqueous as well as metal cation containing subphases were carried out at the mesoscale level with the help of Brewster angle microscopy (BAM). In the case of N-hexadecanoyl alanine on a pure aqueous subphase at 298 K the L-enantiomer forms crystal platelets, while the irregular fractal-like shape of the domains of the racemic mixture can be explained by a diffusion limited aggregation (DLA) growth mechanism. At 303 K the L-enantiomer shows a dendritic growth pattern, which leads to explicitly chiral domain shapes that correspond with the chirality of the film-forming molecules and for which hydrogen bridges as directed attractive forces are assumed to be responsible. The compression of the L-enantiomer on a zinc ion containing subphase is accompanied by a remarkable metamorphosis of the condensed structure. Starting from torus-like domains they were at first converted into strongly wound S-shaped domains, finally turning into a seahorse-like appearance. The origin of these chiral shapes can be explained on the basis of an electrostatic growth model. The enantiomer of N-hexadecanoyl alanine methyl ester shows three different asymmetric dendritic growth patterns. The domains of the racemic mixture are dendritic too, but in contrast they are symmetric and have a notably low branching density. On a pure aqueous subphase the L-enantiomer of N-octadecanoyl valine exhibits dendritic growth as well, but the overall outer shape of the domains is not explicitly chiral.     

Protein displacement by monoglyceride at the air-water interface evaluated by surface shear rheology combined with Brewster angle microscopy

In this work we have used different and complementary interfacial techniques (surface film balance, Brewster angle microscopy, and interfacial shear rheology), to analyze the static (structure, topography, reflectivity, miscibility, and interactions) and flow characteristics (surface shear characteristics) of milk protein (beta-casein, caseinate, and beta-lactoglobulin) and monoglyceride (monopalmitin and monoolein) mixed films spread and adsorbed on the air-water interface. The structural, topographical, and shear characteristics of the mixed films depend on the surface pressure and on the composition of the mixed film. The surface shear viscosity (eta(s)) varies greatly with the surface pressure (pi). In general, the greater the pi values, the greater were the values of eta(s). Moreover, the eta(s) value is also sensitive to the miscibility and/or displacement of film-forming components at the interface. At surface pressures lower than that for protein collapse, protein and monoglyceride coexist at the air-water interface. At surface pressures higher than that for the protein collapse, a squeezing of collapsed protein domains by monoglycerides was deduced. Near to the collapse point, the mixed film is dominated by the presence of the monoglyceride. Different proteins and monoglycerides show different interfacial structure, topography, and shear viscosity values, confirming the importance of protein and monoglyceride structure in determining the interfacial characteristics (interactions) of mixed films. The values of eta(s) are lower for disordered (beta-casein or caseinate) than for globular (beta-lactoglobulin) proteins and for unsaturated (monoolein) than for saturated (monopalmitin) monoglycerides in the mixed film. The displacement of the protein by the monoglycerides is facilitated under shear conditions.     

Interaction of small amounts of bovine serum albumin with phospholipid monolayers investigated by surface pressure and atomic force microscopy

The influence of small amounts of bovine serum albumin (BSA) (nM concentration) on the lateral organization of phospholipid monolayers at the air-water interface and transferred onto solid substrates as one-layer Langmuir-Blodgett (LB) films was investigated. The kinetics of adsorption of BSA onto the phospholipid monolayers was monitored with surface pressure isotherms in a Langmuir trough, for the zwitterionic dipalmitoylphosphatidyl ethanolamine (N,N-dimethyl-PE) and the anionic dimyristoylphosphatidic acid (DMPA). A monolayer of N,N-dimethyl-PE or DMPA incorporating BSA was transferred onto a solid substrate using the Langmuir-Blodgett technique. Atomic force microscopy (AFM) images of one-layer LB films displayed protein-phospholipid domains, whose morphology was characterized using dynamic scaling theories to calculate roughness exponents. For DMPA-BSA films the surface is characteristic of self-affine fractals, which may be described with the Kardar-Parisi-Zhang (KPZ) equation. On the other hand, for N,N-dimethyl-PE-BSA films, the results indicate a relatively flat surface within the globule. The height profile and the number and size of globules varied with the type of phospholipid. The overall results, from kinetics of adsorption on Langmuir monolayers and surface morphology in LB films, could be interpreted in terms of the higher affinity of BSA to the anionic DMPA than to the zwitterionic N,N-dimethyl-PE. Furthermore, the effects from such small amounts of BSA in the monolayer point to a cooperative response of DMPA and N,N-dimethyl-PE monolayers to the protein.     

Infrared reflection absorption spectroscopy coupled with Brewster angle microscopy for studying interactions of amphiphilic triblock copolymers with phospholipid monolayers

Novel water-soluble amphiphilic triblock copolymers poly(glycerol monomethacrylate)-b-poly(propylene oxide)-b-poly(glycerol monomethacrylate) (PGMA-b-PPO-b-PGMA) were synthesized because of their expected enhanced ability to interact with biological membranes compared to the well-known poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-b-PPO-b-PEO) block copolymers. Their bulkier hydrophilic PGMA blocks might induce a disturbance in the packing of liquid-crystalline lipid bilayers in addition to the effect caused by the hydrophobic PPO block alone. To gain a better insight into the polymer-membrane interactions at the molecular level, the adsorption kinetics and concomitant interactions of (PGMA14)(2-)PPO(34) with model membranes of dipalmitoylphosphatidylcholine (DPPC) and dimyristoylphosphatidylcholine (DMPC) were monitored using infrared reflection absorption spectroscopy (IRRAS) coupled with Brewster angle microscopy (BAM) and surface pressure (pi) measurements. The maximum penetration surface pressure of ca. 39 mN/m suggests that (PGMA14)(2-)PPO(34) is able to insert into lipid monolayers even above the so-called monolayer-bilayer equivalent pressure of 30-35 mN/m. Copolymer adsorption to a liquid-expanded DPPC-d62 monolayer proceeds in a two-step mechanism: (i) initially only the more hydrophobic PPO middle block penetrates the lipid monolayer; (ii) following the liquid-expanded-liquid-condensed (LE-LC) phase transition, the bulky PGMA hydrophilic blocks are dragged into the headgroup region as the PPO block inserts further into the fatty acid region. The adsorption kinetics is considerably faster for DMPC-d54 monolayers due to their higher fluidity. Copolymer adsorption to an LC-DPPC-d62 monolayer leads to a change in the monolayer packing by forcing the lipid alkyl chains into a more vertical orientation, their tilt angle with respect to the surface normal being reduced from initially 30 degrees +/- 3 degrees to 18 degrees +/- 3 degrees. BAM images rule out macroscopic phase separation and show that coalescence of DPPC-d62 LC domains takes place at relatively low surface pressures of pi > or = 23 mN/m, suggesting that (PGMA14)(2-)PPO (34) partitions into both LE as well as LC domains.     

Reorganization and caging of DPPC, DPPE, DPPG, and DPPS monolayers caused by dimethylsulfoxide observed using Brewster angle microscopy

The interaction between dimethylsulfoxide (DMSO) and phospholipid monolayers with different polar headgroups was studied using "in situ" Brewster angle microscopy (BAM) coupled to a Langmuir trough. For a 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) monolayer, DMSO was shown to significantly impact the structure of the liquid expanded (LE) and gaseous phases. The domains reorganized to much larger domain structures. Domains in the liquid condensed (LC) phase were formed on the DMSO-containing subphase at the mean molecular area where only gaseous and LE phases were previously observed on the pure water subphase. These results clearly demonstrate the condensing and caging effect of DMSO molecules on the DPPC monolayer. Similar effects were found on dipalmitoyl phosphatidyl ethanolamine, glycerol, and serine phospholipids, indicating that the condensing and caging effect is not dependent upon the phospholipid headgroup structure. The DMSO-induced condensing and caging effect is the molecular mechanism that may account for the enhanced permeability of membranes upon exposure to DMSO.     

Brewster angle microscopy: A preferential method for mesoscopic characterization of monolayers at the air/water interface

Knowledge of the mesoscopic morphology of condensed phase domains formed after the main phase transition in the two-phase coexistence region of Langmuir monolayers progressed rapidly with the development of the highly-sensitive imaging techniques, particularly by Brewster angle microscopy (BAM). Latest developments of commercial BAM instruments have been developed to a high technical level and allow upgrading to imaging ellipsometers which combine optical microscopy and ellipsometry and make the assessment of small layered structures or patterned thin films possible. A large variety of condensed phase domains different in mesoscopic sizes and shapes as well as their textural features has been observed which depend sensitively on the chemical structure of the amphiphilic monolayer and the system conditions, such as surface pressure and temperature. This unsuspected morphological variety of condensed phase domains has been proven not only in Langmuir monolayers but also in adsorbed monolayers (Gibbs monolayers), in Langmuir monolayers penetrated by dissolved surfactants or in adequate molecular recognition systems. The inner textures of domains can be explained on the basis of their geometry and the two-dimensional lattice in dependence of the tilt angle of the alkyl chains and gave rise to the development of a geometric concept on the basis of the molecular packing. New knowledge has been gained about non-equilibrium structures and their transition kinetics into the equilibrium state. Combined results obtained recently by BAM have enhanced the understanding of molecular organization in phase diagrams and binary mixtures. Recent advances in model studies about chiral discrimination effects and of the highly specific structural changes of host-monolayers by recognition of non-surface active guest-components have made progress. Semi-empirical quantum chemical methods have been used to gain insight into the role of different types of interactions involved in the main characteristics of mesoscopic length scale aggregates of mimetic systems.     

In situ observation of protein-adsorbed stearic acid monolayer by Brewster angle microscopy and fluorescence microscopy

A fluorescence probe, fluorescein isothiocyanate (FITC), was introduced to proteins, and the morphology of protein-adsorbed stearic acid monolayer was observed by fluorescence microscopy and Brewster angle microscopy (BAM) in order to analyze images. At a low protein concentration, the surface pressure increased as shown by a sigmoidal curve. A number of stripe patterns in the BAM images increased and the shapes became clear with increasing concentration of proteins. Simultaneously, the size of circular islands also became small, and finally disappeared. These results suggest that the very large stripe patterns in the BAM image show the assembly of both proteins and stearic acid molecules, and small circular islands show only the stearic acid molecules. © 1998 John Wiley & Sons, Ltd.     

Contact angle measurements by confocal microscopy for non-destructive microscale surface characterization

Contact angle measurements are of great importance in surface characterization but the practical use has often been limited to macroscopic dimensions (millimeters). Therefore, we have developed a confocal microscopy method that allows non-destructive measurements of both low (<30 degrees ) and high (30 degrees -90 degrees ) contact angles. Low contact angles were measured by reconstructing the drop profile from the interference patterns in droplets condensed from atmospheric humidity. At higher contact angles water droplets with a small amount of fluorescein were sprayed onto the surfaces and 3D-image stacks were recorded and used to extract the contact angle. Suitable drop sizes were between a few up to about 50 mum radius, using a 40x magnification objective. Using drops >10 micrometers radius for microcontact angle measurements a good correlation was obtained between measured micro- and macrocontact angles. After microcontact angle measurements the surfaces were rinsed and heavy meromyosin motor fragments were adsorbed to the surface. Importantly, the sensitive actin propelling function of these motor proteins was not affected by the previous contact angle measurements using fluorescent droplets. This suggests that the methodology should be suitable for non-destructive characterization of different parts of micropatterned surfaces being developed for biological assays.     

Study of the cholesterol-GM3 ganglioside interaction by surface pressure measurements and fluorescence microscopy

The nature of the cholesterol/glycolipid interaction in rafts being poorly understood, the interaction of cholesterol with the GM₃ ganglioside has been studied by surface pressure measurements and fluorescence microscopy. Results have been compared to those obtained with sphingomyelin (SM)-cholesterol and palmitoyl-oleoyl-phosphatidylcholine (POPC)–cholesterol monolayers. The analysis of (π–A) isotherms of mixed monolayers show a condensing effect of cholesterol on GM₃ molecules, in the same range than the effect observed with POPC and higher than the effect on SM. This is likely due to the similar state of GM₃ and POPC, since both molecules are in liquid expanded phases in our experimental conditions. The study of the cholesterol desorption induced by β-cyclodextrin suggests also that the GM₃–cholesterol interaction is rather weak as in the case of POPC–cholesterol interaction, and clearly lower than SM–cholesterol one. This lack of interaction is discussed in terms of nature of lipid chains and molecular shape, and suggests that no hydrogen bond is formed between GM₃ and cholesterol polar heads. Fluorescence microscopy performed on mixed GM₃–cholesterol monolayers shows the presence, at surface pressure higher than 10 mN/m, of particular blurring patterns without defined boundary, which could be due to a partial solubilization in one phase of different phases observed at lower surface pressure, whereas SM–cholesterol and POPC–cholesterol monolayers are homogeneous at the lateral resolution of our microscopy set-up.     

Phase behavior and morphology of equimolar mixed cationic-anionic surfactant monolayers at the air/water interface: isotherm and Brewster angle microscopy analysis

The phase behavior and morphological characteristics of monolayers composed of equimolar mixed cationic-anionic surfactants at the air/water interface were investigated by measurements of surface pressure-area per alkyl chain (pi-A) and surface potential-area per alkyl chain (DeltaV-A) isotherms with Brewster angle microscope (BAM) observations. Cationic single-alkyl ammonium bromides and anionic sodium single-alkyl sulfates with alkyl chain length ranging from C(12) to C(16) were used to form mixed surfactant monolayers on the water subphase at 21 degrees C by a co-spreading approach. The results demonstrated that when the monolayers were at states with larger areas per alkyl chain during the monolayer compression process, the DeltaV-A isotherms were generally more sensitive than the pi-A isotherms to the molecular orientation variations. For the mixed monolayer components with longer alkyl chains, a close-packed monolayer with condensed monolayer characteristics resulted apparently due to the stronger dispersion interaction between the molecules. BAM images also revealed that with the increase in the alkyl chain length of the surfactants in the mixed monolayers, the condensed/collapse phase formation of the monolayers during the interface compression stage became pronounced. In addition, the variations in the condensed monolayer morphology of the equimolar mixed cationic-anionic surfactants were closely related to the alkyl chain lengths of the components.     

Applications of index matching in reflectometry,SANS and Brewster angle microscopy

By index matching, we mean, the manipulation of the composition of a material such that heterogeneous regions of a sample present identical refractive indices. Such manipulation is commonly used to exaggerate deviations from bulk properties at the interface between two bulk phases. Whilst index matching is used routinely in small-angle scattering it is in the field of neutron reflection that the technique has only recently been exploited fully. Specific deuteration, either inter- or intramolecular combined with partial structure factor (PSF) analysis has allowed structural detail to be elucidated at resolutions of ∼4 Å. In light scattering Brewster angle microscopy exploits the extinction of ‘p’ polarised light to enhance surface inhomogeneites on the scale of microns.     

Formation of 2D colloidal crystals by the Langmuir-Blodgett technique monitored in situ by Brewster angle microscopy

We report a method that combines Brewster angle microscopy and Langmuir-Blodgett films technique to obtain highly ordered 2D colloidal crystals of nanospheres. The deposition of Langmuir-Blodgett films of silica spheres monitored by Brewster angle microscopy allows to determine with accuracy the best physical conditions to transfer highly ordered monolayers of nanoparticles.     

Interaction studies of diacyl glycerol arginine-based surfactants with DPPC and DMPC monolayers, relation with antimicrobial activity

Antimicrobial agents have a major practical importance in food, pharmaceutical and cosmetic applications for preventing contamination. Our group has developed a novel class of cationic diacyl glycerol arginine-based surfactants denoted 1414RAc and 1212RAc. To assess the antimicrobial properties of these new surfactants we have studied how they interact with 1,2-dipalmitoyl-sn-glycero-3-phosphocoline (DPPC) and 1,2-dimiristoyl-sn-glycero-3-phosphocoline (DMPC) as model membranes, as well with living organisms endowed or not with external barriers, such as gram negative bacteria, the human protozoa Leishmania and mammalian cell line.

The structure and phase characteristics of mixed monolayers have been assessed through the analysis of static elasticity. The extent of component miscibility of surfactant and phospholipid in mixed monolayers has been studied using the additivity rule and the excess free energy of a mixture as a function of the phospholipid molar fraction for different surface pressure values. In all the mixtures studied, the mixed monolayer is thermodynamically favoured except for the 1212RAc/DMPC case that exhibits positive values of excess free energy.

The interaction with living cells has cytotoxic effects only in eukaryotic cells, by unspecific membrane permeabilization.     

Adsorption and desorption processes of self-assembled monolayers studied by surface-sensitive microscopy and spectroscopy

Adsorption and desorption processes of self-assembled monolayers (SAMs) have been studied on an Au(111) surface by scanning tunnelling microscopy (STM), atomic force microscopy (AFM), X-ray photo-electron spectroscopy (XPS) and thermal desorption spectroscopy (TDS). At the initial growth stage, the ordered nucleation of SAM located at the herringbone turns of the Au(111) − (22 × √3) surface reconstruction and diffusion-controlled domain formation have been imaged by STM and AFM. Details of the oxidation process in UV desorption were also investigated by XPS. In addition, the dimerization reaction during desorption was confirmed by TDS for the first time in the alkanethiol SAM system.     

Interaction of mercury(II) ions with immobilized apo-metallothioneins studied by scanning electrochemical microscopy combined with surface plasmon resonance

Scanning electrochemical microscopy (SECM) was combined with surface plasmon resonance (SPR) and applied for in-situ monitoring of the incorporation of Hg²⁺ by apo-metallothionein (apo-MT) immobilized on the SPR substrate. Hg²⁺ was anodically stripped from the Hg-coated SECM Pt tip and sequestered by apo-MT upon its diffusion to the SPR substrate. The high sensitivity of the SPR instrument enabled the detection of the change in the composition and structure of apo-MT molecules that was induced by the metal sequestration of Hg²⁺. The SPR response revealed that the saturation co-ordination number of Hg²⁺ binding to apo-MT was 18. Moreover, an unexpected collapse of the structure of MT was observed when the stoichiometric ratio of Hg²⁺/MT was ~70, and the structure cannot be further altered even by adding a large excess of Hg²⁺. This collapse was also confirmed by Raman spectroscopy. The results are potentially useful for a deeper understanding of the detoxification mechanism of MT to mercury ion.

Temperature-dependent formation of octadecylsiloxane self-assembled monolayers on mica as studied by atomic force microscopy

We have investigated the growth of octadecylsiloxane (ODS) self-assembled monolayers on mica. Freshly cleaved muscovite mica and octadecyltrichlorosilane (OTS) dissolved in toluene (c = 1.0 mmol/L) have been used as substrate and precursor, respectively. The water content of the adsorption solution was between 14.6 and 16.6 mmol/L. Adsorption experiments were carried out in a temperature range between 5 and 45 degrees C, and the obtained submonolayer ODS films were characterized with atomic force microscopy (AFM). Besides the morphology of the films, also information on the surface coverage has been obtained by quantitative evaluation of the AFM images. Depending on the temperature, evidence for both ordered and disordered expanded ODS phases has been found. The pronounced maximum in surface coverage--in contrast to adsorption on silicon substrates--at a temperature of about 27 degrees C and the different morphology of the submonolayer films as compared to silicon substrates could be explained in terms of a deposition, diffusion, and aggregation (DDA) model.