Reservoir transport equations by compositional approach

The objective of this paper is to present an overview of the fundamental equations governing transport phenomena in compressible reservoirs. A general mathematical model is presented for important thermo-mechanical processes operative in a reservoir. Such a formulation includes equations governing multiphase fluid (gas-water-hydrocarbon) flow, energy transport, and reservoir skeleton deformation. The model allows phase changes due to gas solubility. Furthermore, Terzaghi's concept of effective stress and stress-strain relations are incorporated into the general model. The functional relations among various model parameters which cause the nonlinearity of the system of equations are explained within the context of reservoir engineering principles. Simplified equations and appropriate boundary conditions have also been presented for various cases. It has been demonstrated that various well-known equations such as Jacob, Terzaghi, Buckley-Leverett, Richards, solute transport, black-oil, and Biot equations are simplifications of the compositional model.Notation List B reservoir thickness - B formation volume factor of phase - Cⁱ mass of component i dissolved per total volume of solution - C ⁱ mass fraction of component i in phase - C heat capacity of phase at constant volume - C_p heat capacity of phase at constant pressure - D ⁱ hydrodynamic dispersion coefficient of component i in phase - D_MTf thermal liquid diffusivity for fluid f - F = F(x, y, z, t) defines the boundary surface - f_p fractional flow of phase - g gravitational acceleration - H_p enthalpy per unit mass of phase - J_p volumetric flux of phase - k_rf relative permeability to fluid f - k₀ absolute permeability of the medium - M_p ⁱ mass of component i in phase - n porosity - N rate of accretion - P_f pressure in fluid f - p_ca capillary pressure between phases and =p-p - Rⁱ rate of mass transfer of component i from phase to phase - Rⁱ _source source rate of component i within phase - S saturation of phase - s gas solubility - T temperature - t time - U displacement vector - u velocity in the x-direction - v velocity in the y-direction - V volume of phase - V_s velocity of soil solids - W_i body force in coordinate direction i - x horizontal coordinate - z vertical coordinate Greek Letters _p volumetric coefficient of compressibility - _T volumetric coefficient of thermal expansion - _ij Kronecker delta - volumetric strain - _m thermal conductivity of the whole matrix - internal energy per unit mass of phase - gf suction head - density of phase - _ij tensor of total stresses - _ij tensor of effective stresses - volumetric content of phase - f viscosity of fluid f     

Evaluation of the dynamic-mechanical properties of solids from a cooperative model for stress relaxation

For many solid materials the stress relaxation process obeys the universal relationF = – (d/d lnt)_max = (0.1 ± 0.01) ( ₀ — _i ), regardless of the structure of the material. Here denotes the stress,t the time, ₀ the initial stress of the experiment and _i the internal stress. A cooperative model accounting for the similarity in relaxation behaviour between different materials was developed earlier. Since this model has a spectral character, the concepts of linear viscoelasticity are used here to evaluate the corresponding prediction of the dynamic mechanical properties, i.e. the frequency dependence of the storageE () and lossE () moduli. Useful numerical approximations ofE () andE () are also evaluated. It is noted that the universal relation in stress relaxation had a counterpart in the frequency dependence ofE (). The theoretical prediction of the loss factor for high-density polyethylene is compared with experimental results. The agreement is good.     

The theory of a vibrating-rod viscometer

The paper presents a complete theory for a viscometer based upon the principle of a circular-section rod, immersed in a fluid, performing transverse oscillations perpendicular to its axis. The theory is established as a result of a detailed analysis of the fluid flow around the rod and is subject to a number of criteria which subsequently constrain the design of an instrument. Using water as an example it is shown that a practical instrument can be designed so as to enable viscosity measurement with an accuracy of ±0.1%, although it is noted that many earlier instruments failed to satisfy one or more of the newly-established constraints.Nomenclature A, D constants in equation (46) - A _m , B _m , C _m , D _m constants in equations (50) and (51) - A _j , B _j constants in equation (14) - a _j ⁺ , a _j ^– wavenumbers given by equation (15) - C _f drag coefficient defined in equation (53) - c speed of sound - D _b drag force of fluid b - D ₀ coefficient of internal damping - E extensional modulus - f(z) initial deformation of rod - f(), F _m () functions of defined in equation (41) - F force in the rod - force per unit length near t=0 - F dimensionless force per unit length near t=0 - g _m amplitude of transient force - G modulus of rigidity - h, h* functions defined by equations (71) and (72) - H functions defined by equation (69) and (70) - I second moment of area - I _0,1, J _0,1, K _0,1 modified Bessel functions - k, k functions defined in equations (2) - L half-length of oscillator - Ma Mach number - m _b added mass per unit length of fluid b - m _s mass per unit length of solid - n _j eigenvalue defined in equations (15) and (16) - R radius of rod - R _c radius of container - r radial coordinate - T tension - T _visc temperature rise due to heat generation by viscous dissipation - t time - v _r , v radial and angular velocity components - y lateral displacement - y ₀ initial lateral displacement - y ₁, y ₂ successive maximum lateral displacement - z axial coordinate - dimensionless tension - dimensionless mass of fluid - dimensionless drag of fluid - amplification factor - logarithmic decrement in a fluid - _a , _b logarithmic decrement in fluids a and b - ₀ logarithmic decrement in vacuo - _j logarithmic decrement in mode j in a fluid - spatial resolution of amplitude - _v voltage resolution - r, , , _s, , increments in R, , , _s , , - dimensionless amplitude of oscillation - dimensionless axial coordinate - angular coordinate - _f thermal conductivity of fluid - viscosity of fluid - viscosity of fluid calculated on assumption that * - _a , _b viscosity of fluids a and b - _m constants in equation (10) - dimensionless displacement - _j j the component of - density of fluid - _a , _b density of fluids a and b - _s density of tube or rod material - dimensionless radial coordinate - * dimensionless radius of container - dimensionless times - spatial component of defined in equation (11) - _j , _tm jth, mth component of - dimensionless streamfunction - ⁰, ¹ components of in series expansion in powers of - streamfunction - dimensionless frequency (based on ) - angular frequency - ₀ angular frequency in absence of fluid and internal damping - _j angular frequency in mode j in a fluid - _a , _b frequencies in fluids a and b     

New concepts in relative permeabilities at high capillary numbers for surfactant flooding

Flooding oil reservoirs with surfactant solutions can increase the amount of oil that can be recovered. Macroscopic modelling of the process requires relative permeabilities to be functions of saturation and capillary number. With only limited experimental data, relative permeabilities have usually been assumed to be linear functions of saturation at high capillary numbers. The experimental data is reviewed, some of which suggest that this assumption is not necessarily correct. The basis for the assumption is therefore reviewed and it is concluded that the linear model corresponds to microscopically segregated flow in the porous medium. Based on new but equally plausible complementary assumptions about the flow pattern, a mixed flow model is derived. These models are then shown to be limiting cases of a droplet model which represents the mixing scale within the porous medium and gives a physical basis for interpolating between the models. The models are based on physical concepts of flow in a porous medium and so the approach described here represents a significant improvement in the understanding of high capillary number flow. This is shown by the fact that fewer parameters are needed to describe experimental data.Notation A total cross-sectional area assigned to capillary bundle - A ⁽ⁱ⁾ physical cross-sectional area of tube i - c ⁽ⁱ⁾ ordered configurational label for droplets in tube i - c configuration label for tube i (order not considered) - D defined by Equation (26) - E(...) expectation value with respect to the trinomial distribution - S _r ⁽⁾ fractional flow of phase - k absolute permeability - k _r relative permeability of phase - k _r ⁰ endpoint relative permeability of phase - L capillary tube length in bundle model - m ⁽ⁱ⁾ number of droplets of phase a occupying tube i - n exponent for phase a in Equation (2) - N number of droplets in bundle model - N _c capillary number - p pressure - p(c') probability of configuration c - Q ⁽ⁱ⁾ total volume flow rate in tube i - S saturation of phase - S flowing saturation of phase - S _r residual saturation of phase - S _r ⁽⁾ saturations when fractional flow of phase is 1 in the case of varying residual saturations for three-phase flow ( ) - t _c residence time for droplet configuration c - v ⁽ⁱ⁾ total fluid velocity in bundle tube i - , phase label - p pressure differential across capillary bundle - ⁽ⁱ⁾ tube conductivity defined by Equation (7) - viscosity of phase - interfacial tension - gradient operator - ... average over tube droplet configurations     

A visualization study of the interaction of a free vortex with the wake behind an airfoil

The two-dimensional interaction of a single vortex with a thin symmetrical airfoil and its vortex wake has been investigated in a low turbulence wind tunnel having velocity of about 2 m/s in the measuring section. The flow Reynolds number based on the airfoil chord length was 4.5 × 10³. The investigation was carried out using a smoke-wire visualization technique with some support of standard hot-wire measurements. The experiment has proved that under certain conditions the vortex-airfoil-wake interaction leads to the formation of new vortices from the part of the wake positioned closely to the vortex. After the formation, the vortices rotate in the direction opposite to that of the incident vortex.List of symbols c test airfoil chord - C vortex generator airfoil chord - TA test airfoil - TE test airfoil trailing edge - TE _G vortex generator airfoil trailing edge - t dimensionless time-interval measured from the vortex passage by the test airfoil trailing edge: gDt=(T-T- _TE)·U/c - T time-interval measured from the start of VGA rotation - U free stream velocity - U vortex induced velocity fluctuation - VGA vortex generator airfoil - y distance in which the vortex passes the test airfoil - Z vortex circulation coefficient: Z=/(U · c/2) - vortex generator airfoil inclination angle - vortex circulation - vortex strength: =/2     

Chaos and integrability in a nonlinear wave equation

We consider the parametrized family of equations _tt ,u- _xx u-au+u ₂ ² u=O,x(0,L), with Dirichlet boundary conditions. This equation has finite-dimensional invariant manifolds of solutions. Studying the reduced equation to a four-dimensional manifold, we prove the existence of transversal homoclinic orbits to periodic solutions and of invariant sets with chaotic dynamics, provided that =2, 3, 4,.... For =1 we prove the existence of infinitely many first integrals pairwise in involution.     

Transport in ordered and disordered porous media II: Generalized volume averaging

In this paper we develop the averaged form of the Stokes equations in terms of weighting functions. The analysis clearly indicates at what point one must choose a media-specific weighting function in order to achieve spatially smoothed transport equations. The form of the weighting function that produces the cellular average is derived, and some important geometrical theorems are presented.Roman Letters A interfacial area of the- interface associated with the local closure problem, m² - A _e area of entrances and exits for the-phase contained within the averaging system, m² - A _p surface area of a particle, m² - d _p 6V _p/A_p, effective particle diameter, m - g gravity vector, m/s² - I unit tensor - K _m permeability tensor for the weighted average form of Darcy's law, m² - L general characteristic length for volume averaged quantities, m - L _p general characteristic length for volume averaged pressure, m - L characteristic length for the porosity, m - L _v characteristic length for the volume averaged velocity, m - l characteristic length (pore scale) for the-phase - l _i i=1, 2, 3 lattice vectors, m - (y) weighting function - m(–y) (y), convolution product weighting function - _v special weighting function associated with the traditional averaging volume - m _v special convolution product weighting function associated with the traditional averaging volume - m _g general convolution product weighting function - m _V unit cell convolution product weighting function - m _C special convolution product weighting function for ordered media which produces the cellular average - m _D special convolution product weighting function for disordered media - m _M master convolution product weighting function for ordered and disordered media - n unit normal vector pointing from the-phase toward the-phase - p pressure in the-phase, N/m² - p_m superficial weighted average pressure, N/m² - p _m intrinsic weighted average pressure, N/m² - p traditional intrinsic volume averaged pressure, N/m² - p p p _m , spatial deviation pressure, N/m² - r ₀ radius of a spherical averaging volume, m - r _m support of the convolution product weighting function, m - r position vector, m - r position vector locating points in the-phase, m - V averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ - V _cell volume of a unit cell, m³ - V velocity vector in the-phase, m/s - vm superficial weighted average velocity, m/s - v _m intrinsic weighted average velocity, m/s - V volume of the-phase contained in the averaging volume, m³ - V _p volume of a particle, m³ - v traditional superficial volume averaged velocity, m/s - v v p _m spatial deviation velocity, m/s - x position vector locating the centroid of the averaging volume or the convolution product weighting function, m - y position vector relative to the centroid, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V /V, volume average porosity - _m m * . weighted average porosity - mass density of the-phase, kg/m³ - viscosity of the-phase, Ns/m² - V /V, volume fraction of the-phase     

Spectral and correlation characteristics of the turbulent boundary layer on an extended flexible cylinder

In marine geophysical seismological prospecting extensive use is made of towed receiving systems consisting of extended flexible cylinders containing acoustic sensors over which the water flows in the longitudinal direction. The boundary layer pressure fluctuations on the cylinder surface are picked up by the sensors as hydrodynamic noise. This paper is concerned with the study of the energy and spacetime characteristics of the pressure fluctuations in the turbulent boundary layer on an extended flexible cylinder in a longitudinal flow. The pressure fluctuations on the cylinder surface have been investigated experimentally for Re_X=(2–4)·10⁷, a dimensionless diameter of the pressure fluctuation sensors d _p ⁺ =d_pu^*/=500, where d_p is the sensor diameter, u^* the dynamic viscosity, and the viscosity coefficient, and frequencies 0.02311.259 (=^*/U). The spectral and correlation characteristics of the pressure fluctuations on the surface of the flexible cylinder are found to differ from the corresponding characteristics for a rigid cylinder [1–4].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i aza, No, 5, pp. 49–54, September–October, 1989.     

Impulsive motion of a semi-infinite flat plate in a viscous fluid

The unsteady laminar boundary layer flow is investigated for a semi-infinite flat plate subjected to impulsive motion. An approximate solution is obtained by utilizing Meksyn's method. These results vary smoothly from Rayleigh's unsteady solution to the steady state solution of Blasius. Results are compared to those of Lam and Crocco.Nomenclature A expansion coefficient, see eq. (13) - a expansion coefficient, see eq. (10) - B expansion coefficient, see eq. (14) - b expansion coefficient, see eq. (12) - G function defined by eq. (6) - U free stream velocity - u velocity in x direction - v velocity in y direction - x coordinate along plate - y coordinate normal to plate Greek symbols (l, ) incomplete gamma function - function defined by eq. (15) - y(U/x) ^1/2 - kinematic viscosity - x/Ut - (Uvx)^1/2 f(, )     

Lower semicontinuity of the attractor for a singularly perturbed hyperbolic equation

For a smooth, bounded domain R, n 3, and a real, positive parameter, we consider the hyperbolic equationu _tt +u _t –u=–f(u) –g in with Dirichlet boundary conditions. Under certain conditions onf, this equation has a global attractorA inH ₀ ¹ () ×L ²(). For=0, the parabolic equation also has a global attractor which can be naturally embedded into a compact setA ₀ inH ₀ ¹ () ×L ²(). If all of the equilibrium points of the parabolic equation are hyperbolic, it is shown that the setsA are lower semicontinuous at=0. Moreover, we give an estimate of the symmetric distance betweenA ₀ andA .     

Heat and mass transfer in laminar flow between parallel porous plates

Summary The problem of heat transfer in a two-dimensional porous channel has been discussed by Terrill [6] for small suction at the walls. In [6] the heat transfer problem of a discontinuous change in wall temperature was solved. In the present paper the solution of Terrill for small suction at the walls is revised and the whole problem is extended to the cases of large suction and large injection at the walls. It is found that, for all values of the Reynolds number R, the limiting Nusselt number Nu increases with increasing R.Nomenclature stream function - 2h channel width - x, y distances measured parallel and perpendicular to the channel walls respectively - U velocity of fluid at x=0 - V constant velocity of fluid at the wall - =y/h nondimensional distance perpendicular to the channel walls - f() function defined in equation (1) - coefficient of kinematic viscosity - R=Vh/ suction Reynolds number - density of fluid - C _p specific heat at constant pressure - K thermal conductivity - T temperature - x=x ₀ position where temperature of walls changes - T ₀, T ₁ temperature of walls for x<x ₀, x>x ₀ respectively - = (T – T ₁)/T ₀ – T ₁) nondimensional temperature - =x/h nondimensional distance along channel - R ^* = Uh/v channel Reynolds number - Pr = C _p/K Prandtl number - _n eigenvalues - B _n() eigenfunctions - B _n ⁽⁰⁾ , () eigenfunctions for R=0 - B ₀ ⁽ⁱ⁾ , B ₀ ⁽ⁱⁱ⁾ ... change in eigenfunctions when R0 and small - K _n constants given by equation (13) - h heat transfer coefficient - Nu Nusselt number - _m mean temperature - C _n constants given by equation (18) - perturbation parameter - B _0i () perturbation approximations to B ₀() - Q = B ₀/ ₀ derivative of eigenfunction with respect to eigenvalue - z nondimensional distance perpendicular to the channel walls - F(z) function defined by (54)     

A light transmittance probe for interfacial area measurements of dispersed two phase flows with small particles

An optical probe measuring interfacial area () by light attenuation has been designed with a special emphasis on flows with sub-millimetric particles. It permits measurements in liquid-liquid or gas-liquid dispersions without need of introducing empirical correcting factors for the standard exponential decay law of light intensity while keeping an extended application range. This probe was successfully tested with an air-glass particle flow, the parameters of which were carefully determined basically by hold-up methods. The volume fraction of the dispersed phase was varied between 0.05% and 5%, and the particle size between 10 m and 300 m.List of symbols D diameter of spherical particle - D _S Sauter diameter - E ₀ irradiance on a surface perpendicular to light propagation 226E;=(1/l) averaged density function along y axis - f density function of a dispersion - f ₁, f ₂ focal length of the lenses L ₁, L ₂ - g granulometry function of a powder (probability density) - h granulometry function of a powder (unnormalized) - I ₀, I light beam intensity respectively before and after passing through the dispersion - j volumetric powder flow - K ₁, K ₂, K ₃ dimensionless constants - l optical path length of the beam in the dispersion - L experimental pipe width along x axis - m mass of a sample - n optical index of the continuous phase - p _a, p ₀ respectively slope of _a and ₀ straight line - r distance between particles - S _d scattering cross-section - V volume of dispersion - averaged particles velocity - x, y, z spatial coordinates - interfacial area - _a absolute interfacial area (by unit volume of dispersion) - ₀ interfacial area measured by light attenuation method - _d angle (around the initial direction of light propagation) within which a particle diffracts - _dr detector aperture angle - light wavelength - _d scattering cross section by unit volume of dispersion - light beam diameter - ₁, ₂ L₁, and L₂ lenses diameters - local volumetric fraction of dispersed phase - averaged fraction of dispersed phase along x axis - ₂ averaged fraction of dispersed phase along x and y axis - volumetric mass of particles     

Theoretical investigation of the effect of an internal heat source on turbulent liquid metal heat transfer in a channel with uniform heat flux

Summary The effect of an internal heat source on the heat transfer characteristics for turbulent liquid metal flow between parallel plates is studied analytically. The analysis is carried out for the conditions of uniform internal heat generation, uniform wall heat flux, and fully established temperature and velocity profiles. Consideration is given both to the uniform or slug flow approximation and the power law approximation for the turbulent velocity profile. Allowance is made for turbulent eddying within the liquid metal through the use of an idealized eddy diffusivity function. It is found that the Nusselt number is unaffected by the heat source strength when the velocity profile is assumed to be uniform over the channel cross section. In the case of a 1/7-power velocity expression, the Nusselt numbers are lower than those in the absence of internal heat generation, and decrease with diminishing eddy conduction. Nusselt numbers, in the absence of an internal heat source, are compared with existing calculations, and indications are that the present results are adequate for preliminary design purposes.Nomenclature A hydrodynamic parameter - a half height of channel - a ₁ a constant, 1+0.01 Pr Re ^0.9 - a ₂ a constant, 0.01 Pr Re ^0.9 - C _p specific heat at constant pressure - D _h hydraulic diameter of channel, 4a - h heat transfer coefficient, q _w/(t _w–t _b) - I ₁ integral defined by (17) - I ₂ integral defined by (18) - k diffusivity parameter, (1+0.01 Pr Re ^0.9)^1/2 - m exponent in power velocity expression - Nu Nusselt number, hD _h/ - Nu ₀ Nusselt number in absence of internal heat generation - Pr Prandtl number, / - Q heat generation rate per volume - q _w wall heat flux - Re Reynolds number for channel, 2/ - s ratio of heat generation rate to wall heat flux, Qa/q _w - T dimensionless temperature, (t _w–t)/(t _w–t _b) - t fluid temperature, t _w wall temperature, t _b fluid bulk temperature - u fluid velocity in x direction, , fluid mean velocity - x longitudinal coordinate measured from channel entrance - x ⁺ dimensionless longitudinal coordinate, 2(x/a)/Pr Re - y transverse coordinate measured from channel centerline - z transverse coordinate measured from channel wall, a–y - molecular diffusivity of heat, /C _p - dummy variable of integration - dummy variable of integration - _H eddy diffusivity of heat - _M eddy diffusivity of momentum - dummy variable of integration - fluid thermal conductivity - _T dimensionless diffusivity, Pr ( _H/) - fluid kinematic viscosity - dummy variable of integration - fluid density - dummy variable of integration - ratio of eddy diffusivity for heat transfer to that for momentum transfer, _H/ _M - average value of - dimensionless velocity distribution, u/     

The moving, plane heat source in an elastic medium

Summary This note presents an exact solution for the stress and displacement field in an unbounded and transversely constrained elastic medium resulting from the motion of a plane heat source travelling through the medium at constant speed in the direction normal to the source plane.Nomenclature mass density - diffusivity - thermal conductivity - Q heat emitted by plane heat source per unit time per unit area - speed of propagation of plane heat source - shear modulus - Poisson's ratio - T temperature - _x, _y, _z normal stress components - u _x, u_y, u_z displacement components - c speed of irrotational waves - t time - x, y, z Cartesian coordinates - =x–vt moving coordinate     

Viscoelastic properties of semidilute poly(methyl methacrylate) solutions

Viscoelastic properties were examined for semidilute solutions of poly(methyl methacrylate) (PMMA) and polystyrene (PS) in chlorinated biphenyl. The number of entanglement per molecule, N, was evaluated from the plateau modulus, G _N . Two time constants, _s and ₁, respectively, characterizing the glass-to-rubber transition and terminal flow regions, were evaluated from the complex modulus and the relaxation modulus. A time constant _k supposedly characterizing the shrink of an extended chain, was evaluated from the relaxation modulus at finite strains. The ratios ₁/ _s and _k / _s were determined solely by N for each polymer species. The ratio ₁/ _s was proportional to N ^4.5 and N ^3.5 for PMMA and PS solutions, respectively. The ratio _k / _s was approximately proportional to N ^2.0 in accord with the prediction of the tube model theory, for either of the polymers. However, the values for PMMA were about four times as large as those for PS. The result is contrary to the expectation from the tube model theory that the viscoelasticity of a polymeric system, with given molecular weight and concentration, is determined if two material constants _s and G _N are known.     

Zur Variationsformulierung nichtlinearer Randwertprobleme

Übersicht Es werden verschiedene Bedingungen aufgestellt, die es erlauben, die durch die beiden (Systeme von) nichtlinearen DifferentialgleichungenA (u, ) = q, B (u, ) = und Randbedingungen zusammen mit den nichtlinearen algebraischen Relationenq = C(u, ), = D(u, ) beschriebene Aufgabe durch äquivalente Variationsprobleme zu ersetzen. Dabei zeigt sich ein enger Zusammenhang mit den in der Festkörpermechanik wohlbekannten Prinzipien der virtuellen Verschiebungen und der virtuellen Kräfte. Die auf systematischem Weg konstruierten Variationsfunktionale enthalten viele in der Physik bekannte Funktionale als Sonderfälle, insbesondere jene, die in der Elastomechanik nach Green, Castigliano, Hellinger, Reißner, Hu und Washizu benannt werden.

---

Summary In this paper there are established various conditions which allow a variational formulation of the problem described by the two (systems of) nonlinear differential equationsA(u, ) = q, B(u, ) = and boundary conditions together with the nonlinear algebraic relationsq = C(u, ), = D(u, ). Besides a close relationship is revealed to the principles of virtual displacements and virtual forces which are wellknown in solid mechanics. The systematically constructed variational functional contain many functionals in physics as special cases, mainly those of Green, Castigliano, Hellinger, Reißner, Hu and Washizu in elastomechanics.

     

Asymptotic behavior of solutions of nonlinear elliptic equations

We study and obtain formulas for the asymptotic behavior as ¦x¦ of C ² solutions of the semilinear equation u=f(x, u), x (*) where is the complement of some ball in ⁿ and f is continuous and nonlinear in u. If, for large x, f is nearly radially symmetric in x, we give conditions under which each positive solution of (*) is asymptotic, as ¦x¦, to some radially symmetric function. Our results can also be useful when f is only bounded above or below by a function which is radially symmetric in x or when the solution oscillates in sign. Examples when f has power-like growth or exponential growth in the variables x and u usefully illustrate our results.     

Eine analytische Näherungslösung für die eingefrorene laminare Grenzschichtströmung eines binären Gemisches

Zusammenfassung Für die eingefrorene laminare Grenzschichtströmung eines teilweise dissoziierten binären Gemisches entlang einer stark gekühlten ebenen Platte wird eine analytische Näherungslösung angegeben. Danach läßt sich die Wandkonzentration als universelle Funktion der Damköhler-Zahl der Oberflächenreaktion angeben. Für das analytisch darstellbare Konzentrationsprofil stellt die Damköhler-Zahl den Formparameter dar. Die Wärmestromdichte an der Wand bestehend aus einem Wärmeleitungs- und einem Diffusionsanteil wird angegeben und diskutiert. Das Verhältnis beider Anteile läßt sich bei gegebenen Randbedingungen als Funktion der Damköhler-Zahl ausdrücken.

---

An analytical approximation for the frozen laminar boundary layer flow of a binary mixture

An analytical approximation is derived for the frozen laminar boundary layer flow of a partially dissociated binary mixture along a strongly cooled flat plate. The concentration at the wall is shown to be a universal function of the Damkohler-number for the wall reaction. The Damkohlernumber also serves as a parameter of shape for the concentration profile which is presented in analytical form. The heat transfer at the wall depending on a conduction and a diffusion flux is derived and discussed. The ratio of these fluxes is expressed as a function of the Damkohler-number if the boundary conditions are known.

---

Formelzeichen A Atom - A₂ Molekül - C Konstante in Gl. (20) - c₁=1/(2C) Konstante in Gl. (35) - c_p spezifische Wärme bei konstantem Druck - D binärer Diffusionskoeffizient - Ec=u ² /(2h_f) Eckert-Zahl - h spezifische Enthalpie - h_t=h+u²/2 totale spezifische Enthalpie - h _A ⁰ spezifische Dissoziationsenthalpie - K_w Reaktionsgeschwindigkeitskonstante der heterogenen Wandreaktion - 1= /( ) Champman-Rubesin-Parameter - Le=Pr/Sc Lewis-Zahl - M Molmasse - p statischer Druck - Pr= c_pf/ Prandtl-Zahl - q_w Wärmestromdichte an der Wand - q_cw, q_dw Wärmeleitungsbzw. Diffusionsanteil der Wärmestromdichte an der Wand - universelle Gaskonstante - R=/(2M_a) individuelle Gaskonstante der molekularen Komponente - Re_x= u x/ Reynolds-Zahl - Sc=/( D) Schmidt-Zahl - T absolute Temperatur - T_d=h _A ⁰ /R charakteristische Dissoziationstemperatur - u, v x- und y-Komponenten der Geschwindigkeit - U=u/u normierte x-Komponente der Geschwindigkeit - x, y Koordinaten parallel und senkrecht zur Platte Griechische Symbole - =A/ Dissoziationsgrad - Grenzschichtdicke - ₂ Impulsverlustdicke - Damköhler-Zahl der Oberflächenreaktion - =T/T normierte Temperatur - =y/ normierter Wandabstand - Wärmeleitfähigkeit - dynamische Viskosität - , ^* Ähnlichkeitskoordinaten - Dichte - Schubspannung Indizes A auf ein Atom bezogen - M auf ein Molekül bezogen - f auf den eingefrorenen Zustand bezogen - w auf die Wand bezogen - auf den Außenrand der Grenzschicht bezogen     

Zur Berechnung der Filmverdunstung von Kohlenwasserstoffen in einem Heißluftstrom

The results of an analytical approximation method to predict the film vaporization are compared with the predictions of a finite difference method of Hermitian type. The analytically estimated rate of vaporization of different hydrocarbons, which is the most important value for practical applications, deviates only a few percents from the numerically estimated value.

---

Zur Berechnung der Filmverdunstung von Kohlenwasserstoffen in einem Heißluftstrom

Zusammenfassung Es wird ein Näherungsverfahren zur Berechnung der Filmverdunstung dargestellt, bei dem eine vollständige Lösung der miteinander gekoppelten Grenzschichtgleichungen entfallt. Die nach dieser analytischen Methode ermittelte Verdunstung verschiedener Kohlenwasserstoffe wird mit Werten verglichen, die nach einem Differenzenverfahren vom Hermiteschen Typ berechnet wurden. Es zeigt sich, daß die analytisch berechnete Verdunstungsrate, die für praktische Anwendungen wichtigste Größe, nur wenige Prozent von dem numerisch ermittelten Wert abweicht.

---

Formelzeichen c _ew Konzentrationsdifferenz c_1e -c _1w - c _i Massenkonzentration der Komponentei - c_p, c_pi spezifische Wärmekapazität bei konstantem Druck des Gemisches — der Komponentei - D ₁₂ binärer Diffusionskoeffizient - f dimensionslose Stromfunktion - f dimensionslose Geschwindigkeit - g () allgemeine Funktion - m ₁ Massenstromdichte der Komponente 1 - m ^* dimensionslose Massenstromdichte, G1. (4.8) - M, M_i Molgewicht, — der Komponentei - P, P _i Druck, Partialdruck der Komponentei - Pr Prandtlzahl,C _p/ - q Wärmestromdichte - r ₁ Verdampfungswärme - R allgemeine Gaskonstante - Sc Schmidtzahl/D ₁₂ - T absolute Temperatur - u Geschwindigkeitskomponente inx-Richtung - v Geschwindigkeitskomponente iny-Richtung - x Längskoordinate - y Querkoordinate - z dimensionslose Konzentration - dimensionslose Funktion/ _{e e} - transformierte Koordinatey - dimensionslose Temperatur (T-T _w)/(T_e-T_w) - Wärmeleitfähigkeit des Gemisches - Zähigkeit des Gemisches - transformierte Koordinate - Dichte des Gemisches - Stromfunktion Indizes e am Außenrand der Grenzschicht - i Stoffi - w an der Filmoberfläche - 1, 2 Komponente 1, 2 - () Ableitung ()/ _n      

Theoretical derivation of tangential velocity profiles in a flat vortex chamber-influence of turbulence and wall friction

Summary As part of a study on the hydrodynamics of a cyclone separator, a theoretical investigation of the flow pattern in a flat box cyclone (vortex chamber) has been carried out. Expressions have been derived for the tangential velocity profile as influenced by internal friction (eddy viscosity) and wall friction. The most important parameter controlling the tangential velocity profile is = –u ₀ R/(v+ ), where u ₀ is the radial velocity at the outer radius R of the cyclone, the kinematic liquid viscosity and is the kinematic eddy viscosity. For values of greater than about 10 the tangential velocity profile is nearly hyperbolic, for smaller than 1 the tangential velocity even decreases towards the centre. It is shown how and also the wall friction coefficient may be obtained from experimental velocity profiles with the aid of suitable graphs. Because of the close relation between eddy viscosity and eddy diffusion, measurements of velocity profiles in flat box cyclones will also provide information on the eddy motion of particles in a cyclone, a motion reducing its separation efficiency.List of symbols A cross-sectional area of cyclone inlet - h height of cyclone - p static pressure in cyclone - p static pressure difference in cyclone between two points on different radius - r radius in cyclone - r ₁ radius of cyclone outlet - R radius of cyclone circumference - u radial velocity in cyclone - u ₀ radial velocity at circumference of flat box cyclone - v tangential velocity - v ₀ tangential velocity at circumference of flat box cyclone - w axial velocity - z axial co-ordinate in cyclone - friction coefficient in flat box cyclone (for definition see § 5) - ₁ value of friction coefficient for ₁<< ₂ - ₂ value of friction coefficient for ₂<<1 - = - ₁ value of for ₁<< ₂ - ₂ value of for ₂<<1 - thickness of laminar boundary layer - =/h - turbulent kinematic viscosity - ratio of z to h - k ratio of height of cyclone to radius R of cyclone - parameter describing velocity profile in cyclone =–u ₀ R/(+) - kinematic viscosity of fluid - density of fluid - ratio of r to R - ₁ value of at outlet of cyclone - ₂ value of at inner radius of cyclone inlet - _w shear stress at cyclone wall - angular momentum in cyclone/angular momentum in cyclone inlet - ₁ value of at = ₁ - ₂ value of at = ₂