粘性流基于特征线的四阶Runge-Kutta有限元法

对于二维不可压缩粘性流,通过沿流线方向的坐标变换,推导了无对流项的二维N-S（Navier-Stokes）方程。采用四阶Runge-Kutta法对N-S方程进行时间离散,并沿流线进行Taylor展开,得到显式的时间离散格式,然后利用Galerkin法对其进行空间离散,得到了高精度的有限元算法。利用本文算法对方腔驱动流和圆柱绕流进行了数值计算,通过对时间步长、网格尺寸和流场区域的计算分析,进一步验证了本文算法相比经典CBS法在时间步长、收敛性、耗散性和计算精度方面更具有优势。     

Development of an Artificial Compressibility Methodology with Implicit LU-SGS Method

A numerical method has been developed to solve the steady and unsteady incompressible Navier-Stokes equations in a two-dimensional, curvilinear coordinate system. The solution procedure is based on the method of artificial compressibility and uses a third-order flux-difference splitting upwind differencing scheme for convective terms and second-order center difference for viscous terms. A time-accurate scheme for unsteady incompressible flows is achieved by using an implicit real time discretization and a dual-time approach, which introduces pseudo-unsteady terms into both the mass conservation equation and momentum equations. An efficient fully implicit algorithm LU-SGS, which was originally derived for the compressible Eulur and Navier-Stokes equations by Jameson and Toon [1], is developed for the pseudo-compressibility formulation of the two dimensional incompressible Navier-Stokes equations for both steady and unsteady flows. A variety of computed results are presented to validate the present scheme. Numerical solutions for steady flow in a square lid-driven cavity and over a backward facing step and for unsteady flow in a square driven cavity with an oscillating lid and in a circular tube with a smooth expansion are respectively presented and compared with experimental data or other numerical results.     

UNSTEADY／STEADY NUMERICAL SIMULATION OF THREE-DIMENSIONAL INCOMPRESSIBLE NAVIER-STOKES EQUATIONS ON ARTIFICIAL COMPRESSIBILITY

A mixed algorithm of central and upwind difference scheme for the solution of steady/unsteady incompressible Navier-Stokes equations is presented. The algorithm is based on the method of artificial compressibility and uses a third-order flux-difference splitting technique for the convective terms and the second-order central difference for the viscous terms. The numerical flux of semi-discrete equations is computed by using the Roe approximation. Time accuracy is obtained in the numerical solutions by subiterating the equations in pseudotime for each physical time step. The algebraic turbulence model of Baldwin-Lomax is ulsed in this work. As examples, the solutions of flow through two dimensional flat, airfoil, prolate spheroid and cerebral aneurysm are computed and the results are compared with experimental data. The results show that the coefficient of pressure and skin friction are agreement with experimental data, the largest discrepancy occur in the separation region where the lagebraic turbulence model of Baldwin-Lomax could not exactly predict the flow.     

A characteristic-based method for incompressible flows

A new characteristic-based method for the solution of the 2D laminar incompressible Navier-Stokes equations is presented. For coupling the continuity and momentum equations, the artificial compressibility formulation is employed. The primitives variables (pressure and velocity components) are defined as functions of their values on the characteristics. The primitives variables on the characteristics are calculated by an upwind diffencing scheme based on the sign of the local eigenvalue of the Jacobian matrix of the convective fluxes. The upwind scheme uses interpolation formulae of third-order accuracy. The time discretization is obtained by the explicit Runge–Kutta method. Validation of the characteristic-based method is performed on two different cases: the flow in a simple cascade and the flow over a backwardfacing step.     

A hybrid vertex-centered finite volume/element method for viscous incompressible flows on non-staggered unstructured meshes

This paper proposes a hybrid vertex-centered finite volume/finite element method for solution of the two dimensional (2D) incompressible Navier-Stokes equations on unstructured grids.An incremental pressure fractional step method is adopted to handle the velocity-pressure coupling.The velocity and the pressure are collocated at the node of the vertex-centered control volume which is formed by joining the centroid of cells sharing the common vertex.For the temporal integration of the momentum equations,an implicit second-order scheme is utilized to enhance the computational stability and eliminate the time step limit due to the diffusion term.The momentum equations are discretized by the vertex-centered finite volume method (FVM) and the pressure Poisson equation is solved by the Galerkin finite element method (FEM).The momentum interpolation is used to damp out the spurious pressure wiggles.The test case with analytical solutions demonstrates second-order accuracy of the current hybrid scheme in time and space for both velocity and pressure.The classic test cases,the lid-driven cavity flow,the skew cavity flow and the backward-facing step flow,show that numerical results are in good agreement with the published benchmark solutions.     

A streamline diffusion nonconforming finite element method for the time-dependent linearized Navier-Stokes equations

A nonconforming finite element method of finite difference streamline diffusion type is proposed to solve the time-dependent linearized Navier-Stokes equations. The backward Euler scheme is used for time discretization. Crouzeix-Raviart nonconforming finite element approximation, namely, nonconforming （P1）2 - P0 element, is used for the velocity and pressure fields with the streamline diffusion technique to cope with usual instabilities caused by the convection and time terms. Stability and error estimates are derived with suitable norms.     

Numerical modeling of a viscous incompressible unsteady separated flow past a rotating cylinder

For studying unsteady flow past a rotating circular cylinder the Navier-Stokes equations are used. The numerical algorithm is based on an artificial-compressibility method, an implicit three-layer second-order scheme with subiterations with respect to time, a third-order scheme with splitting of the flux vectors for the convective terms, and a central-difference scheme for integrating the viscous terms. The calculated velocity profiles, the vorticity fields, the Strouhal numbers, the distribution of the pressure and friction coefficients over the cylinder surface, and the coefficients of the drag and lift forces for the laminar flow regime are analyzed.     

Finite Element Analysis for 3-D High Reynolds Number Flows

A Petrov-Galerkin finite element method using exponential weighting functions for the computation of three-dimensional incompressible viscous flow problems is presented. The unsteady incompressible Navier-Stokes equations are discretized by means of a semi-explicit scheme with respect to the time variable. As the time-marching scheme, the fractional step method is used effectively. Numerical results demonstrate that the present method is capable of solving the cubic cavity flow accurately and in a stable manner for Reynold numers up to 10⁴     

非稳态流动的隐式最小二乘等几何方法

对非稳态粘性不可压流动问题提出了一种隐式最小二乘等几何计算方法。该方法先用隐式的向后多步差分格式对Navier-Stokes方程进行时间离散,再用Newton法线性化对流项,最后在每个时间步上用最小二乘等几何方法进行求解。根据该算法编制了计算程序,通过构造解析解的方法验证了程序的正确性,用该程序求解了雷诺数为5000时的非稳态二维顶盖驱动流问题,计算结果捕捉到了流动过程中涡的演化过程,表明本文方法可用于非稳态流动的求解。     

NUMERICAL SIMULATION FOR NAVIER-STOKES EQUATIONS BY PROJECTION/CHARACTERISTIC-BASED OPERATOR-SPLITTING FINITE ELEMENT METHOD

提出了一种求解非定常不可压缩纳维-斯托克斯方程（N-S方程）的新型有限元法：基于投影法的特征线算子分裂有限元法.在每一个时间层上将N-S方程分裂成扩散项、对流项、压力修正项.对流项采用多步显式格式,且在每一个对流子时间步内采用更加精确的显式特征线-伽辽金法进行时间离散,空间离散采用标准伽辽金法.应用此算法对平面泊肃叶流、方腔流和圆柱绕流进行数值模拟,所得结果与基准解符合良好.尤其对于Re=10000的方腔流,给出了方腔中分离涡发展和运动的计算结果,并发现在该雷诺数下存在周期解,表明该算法能较好地模拟流体流动中的小尺度物理量以及流场中分离涡的运动.     

N-S方程基于投影法的特征线算子分裂有限元求解

提出了一种求解非定常不可压缩纳维-斯托克斯方程（N-S方程）的新型有限元法:基于投影法的特征线算子分裂有限元法.在每一个时间层上将N-S方程分裂成扩散项、对流项、压力修正项.对流项采用多步显式格式,且在每一个对流子时间步内采用更加精确的显式特征线-伽辽金法进行时间离散,空间离散采用标准伽辽金法.应用此算法对平面泊肃叶流、方腔流和圆柱绕流进行数值模拟,所得结果与基准解符合良好.尤其对于Re=10000的方腔流,给出了方腔中分离涡发展和运动的计算结果,并发现在该雷诺数下存在周期解,表明该算法能较好地模拟流体流动中的小尺度物理量以及流场中分离涡的运动.      

Spectral/hp penalty least‐squares finite element formulation for unsteady incompressible flows

In this paper, we present spectral/hp penalty least‐squares finite element formulation for the numerical solution of unsteady incompressible Navier–Stokes equations. Pressure is eliminated from Navier–Stokes equations using penalty method, and finite element model is developed in terms of velocity, vorticity and dilatation. High‐order element expansions are used to construct discrete form. Unlike other penalty finite element formulations, equal‐order Gauss integration is used for both viscous and penalty terms of the coefficient matrix. For time integration, space–time decoupled schemes are implemented. Second‐order accuracy of the time integration scheme is established using the method of manufactured solution. Numerical results are presented for impulsively started lid‐driven cavity flow at Reynolds number of 5000 and transient flow over a backward‐facing step. The effect of penalty parameter on the accuracy is investigated thoroughly in this paper and results are presented for a range of penalty parameter. Present formulation produces very accurate results for even very low penalty parameters (10–50). Copyright © 2008 John Wiley & Sons, Ltd.     

不可压黏性流问题的无网格法分析

不可压缩黏性流问题一般采用Navier-Stokes方程来描述，基于加权残值法，推导了问题的无网格伽辽金法（EFGM）离散Navier-Stokes方程，在时间域上采用分步方法计算，速度和压力由相互独立的方程以解耦的形式求解，并采用同阶移动最小二乘近似，在每一时间步中，对压力解和速度解采用了Newton-Raphson迭代法进行修正，最后将所得到的方法应用到剪切驱动空腔流问题中，验证了方法的有效性，且解的精度高、稳定性好。     

亚网格尺度稳定化有限元求解不可压黏性流动

从亚网格尺度稳定化方法的基本原理出发, 提出了适合时间推进求解非定常Navier-Stokes方程获得定常解的SGS稳定化方法. 基于一定程度的近似和简化, 获得了与时间步长相关的稳定化参数, 从而排除了传统SGS稳定化方法在求解高Re数、小时间步长问题时所引发的数值不稳定性. 把SGS稳定化方法应用于求解不可压湍流, 结合标准k-\varepsilon湍流模型和壁面函数法估计湍流黏性系数, 详细讨论了壁面函数法的实施、湍流输运方程的求解和保证湍流变量非负性的限制策略, 发展了时间推进求解不可压湍流的分离式算法. 二维外掠后台阶层流和湍流计算结果表明,该方法求解不可压黏性流动是可行的, 并且具有稳定性好、计算精度高的特点.      

Asymptotic analysis of a pulsating flow of viscous fluid in a symmetric deformed channel

The time-periodic flow of a viscous incompressible fluid in a two-dimensional symmetric channel with slightly deformed walls is considered. The solution of the Navier-Stokes equations is constructed by means of the method of matched asymptotic expansions [1] at large characteristic Reynolds numbers. It is shown that in an unsteady flow a region of nonlinear perturbations surrounds the line of zero velocity inside the fluid. The formation and development of such nonlinear zones with respect to time is considered. An alternation of the topological features of the streamline pattern in the nonlinear perturbation zone is discovered.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 17–23, July–August, 1987.The author is deeply grateful to V. V. Sychev for his formulation of the problem and his attentive attitude to my work.     

Streamline computations for porous media flow including gravity

In this paper we consider porous media flow without capillary effects. We present a streamline method which includes gravity effects by operator splitting. The flow equations are treated by an IMPES method, where the pressure equation is solved by a (standard) finite element method. The saturation equation is solved by utilizing a front tracking method along streamlines of the pressure field. The effects of gravity are accounted for in a separate correction step. This is the first time streamlines are combined with gravity for three-dimensional (3D) simulations, and the method proves favourable compared to standard splitting methods based on fractional steps. By our splitting we can take advantage of very accurate and efficient 1D methods. The ideas have been implemented and tested in a full field simulator. In that context, both accuracy and CPU efficiency have tested favourably.     

Numerical Analysis of Thermally Coupled Flow Problems with Interfaces and Phase-change Effects

In this work a fixed mesh finite element approach is presented to solve thermally coupled flow problems including moving interfaces between immiscible fluids and phase-change effects. The weak form of the full incompressible Navier-Stokes equations is obtained using a generalized streamline operator (GSO) technique that enables the use of equal order interpolation of the primitive variables of the problem: velocity, pressure and temperature. The interfaces are defined with a mesh of marker points whose motion is obtained applying a Lagrangian scheme. Moreover, a temperature-based formulation is considered to describe the phase-change phenomena. The proposed methodology is used in the analysis of a filling of a step mould and a gravity-driven flow of an aluminium alloy in an obstructed vertical channel.     

基于WENO-THINC/WLIC模型的水气二相流数值模拟

水气二相流与诸多领域的实际工程问题密切相关.对二相流运动进行高精度的数值模拟是计算流体力学研究的难点和热点.针对开敞水域的自由表面流运动问题,将水和空气均视为不可压缩流体,采用五阶加权基本无震荡(weighted essentially non-oscillatory,WENO)格式求解描述流体运动的纳维斯托克斯(Na...     

二维定常不可压缩粘性流动N-S方程的数值流形方法

将流形方法应用于定常不可压缩粘性流动N-S方程的直接数值求解,建立基于Galerkin加权余量法的N-S方程数值流形格式,有限覆盖系统采用混合覆盖形式,即速度分量取1阶和压力取0阶多项式覆盖函数,非线性流形方程组采用直接线性化交替迭代方法和Nowton-Raphson迭代方法进行求解.将混合覆盖的四节点矩形流形单元用于阶梯流和方腔驱动流动的数值算例,以较少单元获得的数值解与经典数值解十分吻合.数值实验证明,流形方法是求解定常不可压缩粘性流动N-S方程有效的高精度数值方法.