Solutions of one dimensional steady flow of dusty gas in an anholonomic co-ordinate system

We study the geometry of one-dimensional (i.e. unidirectional) incompressible steady dusty gas flow in Frenet frame field system (anholonomic co-ordinate system) by assuming the paths of velocities of dust and fluid phases to be in the same direction. The intrinsic decompositions of the basic equation are carried out and solutions for velocity of fluid phaseu, velocity of dust phasev and pressure of the fluid are obtained in terms of spin coefficients, i.e. geometrical parameters like curvatures and torsions of the streamline when the flow is

Melting heat and mass transfer in stagnation point micropolar fluid flow of temperature dependent fluid viscosity and thermal conductivity at constant vortex viscosity

Steady mixed convection micropolar fluid flow towards stagnation point formed on horizontal linearly stretchable melting surface is studied. The vortex viscosity of micropolar fluid along a melting surface is proposed as a constant function of temperature while dynamic viscosity and thermal conductivity are temperature dependent due to the influence of internal heat source on the fluid. Similarity transformations were used to convert the governing equation into non-linear ODE and solved numerically. A parametric study is conducted. An analysis of the results obtained shows that the flow-field is influenced appreciably by heat source, melting, velocity ratio, variable viscosity and thermal conductivity.     

Three-dimensional Couette flow of a dusty fluid with heat transfer

This work is focused on the mathematical modeling of three-dimensional Couette flow and heat transfer of a dusty fluid between two infinite horizontal parallel porous flat plates. The problem is formulated using a continuum two-phase model and the resulting equations are solved analytically. The lower plate is stationary while the upper plate is undergoing uniform motion in its plane. These plates are, respectively, subjected to transverse exponential injection and its corresponding removal by constant suction. Due to this type of injection velocity, the flow becomes three dimensional. The closed-form expressions for velocity and temperature fields of both the fluid and dust phases are obtained by solving the governing partial differential equations using the perturbation method. A selective set of graphical results is presented and discussed to show interesting features of the problem.     

Stagnation flow on a cylinder with partial slip--an exact solution of the Navier-Stokes equations

The stagnation slip flow on an axially moving cylinder is studied.The Navier–Stokes and energy equations reduce to nonlinearordinary differential equations under a similarity transform.For large slip, the flow field decays exponentially into potentialflow. The heat transfer can be expressed as an incomplete gammafunction. In general, the heat transfer increases with slip,Prandtl number and Reynolds number.     

Similarity solution for a cylindrical shock wave in a rotational axisymmetric dusty gas with heat conduction and radiation heat flux

The propagation of shock waves in a rotational axisymmetric dusty gas with heat conduction and radiation heat flux, which has a variable azimuthally fluid velocity together with a variable axial fluid velocity, is investigated. The dusty gas is assumed to be a mixture of non-ideal (or perfect) gas and small solid particles, in which solid particles are continuously distributed. It is assumed that the equilibrium flow-condition is maintained and variable energy input is continuously supplied by the piston (or inner expanding surface). The fluid velocities in the ambient medium are assume to be vary and obey power laws. The density of the ambient medium is assumed to be constant, the heat conduction is express in terms of Fourier’s law and the radiation is considered to be of the diffusion type for an optically thick grey gas model. The thermal conductivity K and the absorption coefficient α_R are assumed to vary with temperature and density. In order to obtain the similarity solutions the angular velocity of the ambient medium is assume to be decreasing as the distance from the axis increases. The effects of the variation of the heat transfer parameter and non-idealness of the gas in the mixture are investigated. The effects of an increase in (i) the mass concentration of solid particles in the mixture and (ii) the ratio of the density of solid particles to the initial density of the gas on the flow variables are also investigated.     

Numerical prediction of buoyancy driven micropolar fluid flow within uniformly heated eccentric annulus

In this paper, the problem of buoyancy driven micropolar fluid flow within an annulus formed between two circular concentric/eccentric tubes has been numerically investigated using Fourier spectral method. The annulus inner wall is uniformly heated and maintained at constant heat flux while the outer wall is cooled and kept at constant temperature. The full governing equations of linear momentum, angular momentum and energy have been solved to give the details of flow and thermal fields. The heat convection process in the annulus is mainly controlled by modified Rayleigh number Ra, Prandtl number Pr, radius ratio Rr, eccentricity, e and material parameters of Micropolar fluid. The material parameters are dimensionless spin gradient viscosity λ, dimensionless micro-inertia density B and dimensionless vortex viscosity D. The study considered a range of modified Ra up to 10⁵ and is carried out at three values of Pr, namely Pr = 0.1, 1.0 and 7.0, and at three values of parameter D, namely, D = 2, 4, 8 while the eccentricity is varied between −0.65 and +0.65. The radius ratio is fixed at 2.6 while the material parameters B and λ are assigned the value of 1. The effect of the controlling parameters on flow and thermal fields has been investigated with emphasis on the effect of these parameters on local and mean inner wall temperatures. The study has shown that for certain controlling parameters the steady mean temperature of inner wall of the annulus is maximum at a certain eccentricity. The study has also shown that as the parameter D increases the steady mean inner wall temperature increases. Moreover, the study has shown that as the Pr increases the mean inner wall temperature decreases.     

NSM solution for unsteady MHD Couette flow of a dusty conducting fluid with variable viscosity and electric conductivity

The effects of dependence on temperature of the viscosity and electric conductivity, Reynolds number and particle concentration on the unsteady MHD flow and heat transfer of a dusty, electrically conducting fluid between parallel plates in the presence of an external uniform magnetic field have been investigated using the network simulation method (NSM) and the electric circuit simulation program Pspice. The fluid is acted upon by a constant pressure gradient and an external uniform magnetic field perpendicular is applied to the plates. We solved the steady-state and transient problems of flow and heat transfer for both the fluid and dust particles. With this method, only discretization of the spatial co-ordinates is necessary, while time remains as a real continuous variable. Velocity and temperature are studied for different values of the viscosity and magnetic field parameters and for different particle concentration and upper wall velocity.     

Effects of radiation and variable viscosity on unsteady MHD flow of a rotating fluid from stretching surface in porous medium

This work is focused on the study of unsteady magnetohydrodynamics boundary-layer flow and heat transfer for a viscous laminar incompressible electrically conducting and rotating fluid due to a stretching surface embedded in a saturated porous medium with a temperature-dependent viscosity in the presence of a magnetic field and thermal radiation effects. The fluid viscosity is assumed to vary as an inverse linear function of temperature. The Rosseland diffusion approximation is used to describe the radiative heat flux in the energy equation. With appropriate transformations, the unsteady MHD boundary layer equations are reduced to local nonsimilarity equations. Numerical solutions of these equations are obtained by using the Runge–Kutta integration scheme as well as the local nonsimilarity method with second order truncation. Comparisons with previously published work have been conducted and the results are found to be in excellent agreement. A parametric study of the physical parameters is conducted and a representative set of numerical results for the velocity in primary and secondary flows as well as the local skin-friction coefficients and the local Nusselt number are illustrated graphically to show interesting features of Darcy number, viscosity-variation, magnetic field, rotation of the fluid, and conduction radiation parameters.     

Unsteady hydromagnetic Couette flow of dusty fluid with temperature dependent viscosity and thermal conductivity under exponential decaying pressure gradient

In the present paper the unsteady Couette flow and heat transfer of a dusty conducting fluid between two parallel plates with temperature dependent viscosity and thermal conductivity are studied. The fluid is acted upon by an exponential decaying pressure gradient and an external uniform magnetic field is applied. The governing coupled momentum and energy equations are solved numerically using finite differences. The effect of the variable viscosity and thermal conductivity of the fluid and the uniform magnetic field on the velocity and temperature fields for both the fluid and dust particles is discussed.     

Heat transfer in MHD viscoelastic fluid flow over a stretching sheet with variable thermal conductivity,non-uniform heat source and radiation

An analysis has been carried out to study the magnetohydrodynamic boundary layer flow and heat transfer characteristics of a non-Newtonian viscoelastic fluid over a flat sheet with a linear velocity in the presence of thermal radiation and non-uniform heat source. The thermal conductivity is assumed to vary as a linear function of temperature. The basic equations governing the flow and heat transfer are in the form of partial differential equations, the same have been reduced to a set of non-linear ordinary differential equations by applying suitable similarity transformation. The transformed equations are solved analytically by regular perturbation method. Numerical solution of the problem is also obtained by the efficient shooting method, which agrees well with the analytical solution. The effects of various physical parameters such as viscoelastic parameter, Chandrasekhar number, Prandtl number, variable thermal conductivity parameter, Eckert number, thermal radiation parameter and non-uniform heat source/sink parameters which determine the temperature profiles are shown in several plots and the heat transfer coefficient is tabulated for a range of values of said parameters. Some important findings reported in this work reveals that combined effect of variable thermal conductivity, radiation and non-uniform heat source have significant impact in controlling the rate of heat transfer in the boundary layer region.     

Analysis of unsteady stagnation‐point flow over a shrinking sheet and solving the equation with rational Chebyshev functions

This paper investigates the nonlinear boundary value problem, resulting from the exact reduction of the Navier–Stokes equations for unsteady laminar boundary layer flow caused by a stretching surface in a quiescent viscous incompressible fluid. We prove existence of solutions for all values of the relevant parameters and provide unique results in the case of a monotonic solution. The results are obtained using a topological shooting argument, which varies a parameter related to the axial shear stress. To solve this equation, a numerical method is proposed based on a rational Chebyshev functions spectral method. Using the operational matrices of derivative, we reduced the problem to a set of algebraic equations. We also compare this work with some other numerical results and present a solution that proves to be highly accurate. Copyright © 2016 John Wiley & Sons, Ltd.     

Slip effects on MHD flow of a generalized Oldroyd-B fluid with fractional derivative

This paper presents an analysis for magnetohydrodynamic (MHD) flow of an incompressible generalized Oldroyd-B fluid inducing by an accelerating plate. Where the no-slip assumption between the wall and the fluid is no longer valid. The fractional calculus approach is introduced to establish the constitutive relationship of a viscoelastic fluid. Closed form solutions for velocity and shear stress are obtained in terms of Fox H-function by using the discrete Laplace transform of the sequential fractional derivatives. The solutions for no-slip condition and no magnetic field can be derived as the special cases. Furthermore, the effects of various parameters on the corresponding flow and shear stress characteristics are analyzed and discussed in detail.     

The asymptotics of blow-up in inviscid Boussinesq flow and related systems

We consider the approach to blow-up in two-dimensional inviscidflows with stagnation-point similitude, in particular a buoyancy-drivenflow resulting from a horizontally quadratic density variationin a horizontally unbounded slab. The blow-up, which is onlypossible because the flow has infinite energy, proceeds by intensificationof the vorticity and density gradient in a layer adjacent tothe upper boundary, while the remainder of the flow tends towardsirrotationality. The governing Boussinesq flow equations arefirst solved numerically, and the results suggest scalings whichare then used in an asymptotic analysis as 0, where is thetime remaining until blow-up. The structure of the asymptoticsolution, involving exponential orders as well as powers andlogarithms of the small parameter, is suggested by the analysisof a simpler related problem for which an exact solution isavailable. The expansion is uniformly valid across the upperboundary layer and the outer region, but there is a layer adjacentto the lower boundary where the flow remains dependent on theinitial conditions and is undetermined by the asymptotics.     

Entropy generation in nanofluid flow of Walters-B fluid with homogeneous-heterogeneous reactions

Research on optimization of entropy generation in nanofluid flow gained much interest. In this study, the Walter's-B nanofluid flow is considered to analyze the irreversibility in cubic autocatalysis. Fluid motion is considered in presence of viscous dissipation, magnetohydrodynamics (MHD), radiation, and heat generation absorption. Homotopy analysis method (HAM) is employed to solve nonlinear ordinary differential system. Results show that fluid flow reduces for larger Weissenberg and Hartman numbers. Temperature gradually enhances for larger Weissenberg number and radiation parameter. For higher estimation of thermophoresis parameter, the temperature and concentration are enhanced. Opposite impact of Hartman and Weissenberg numbers is noticed for entropy generation and Bejan number. Disorderedness and Bejan number are reduced near the sheet, while the opposite trend is seen away from the sheet.     

Propagation of harmonic waves in prestressed fiber viscoelastic thick tubes filled with a viscous dusty fluid

In this work, propagation of harmonic waves in initially stressed cylindrical viscoelastic thick tubes filled with a Newtonian fluid is studied. The tube, subjected to a static inner pressure P_i and a positive axial stretch λ, will be considered as an incompressible viscoelastic and fibrous material. The fluid is assumed as an incompressible, viscous and dusty fluid. The field equations for the fluid are obtained in the cylindrical coordinates. The governing differential equations of the tube’s viscoelastic material are obtained also in the cylindrical coordinates utilizing the theory of small deformations superimposed on large initial static deformations. For the axially symmetric motion the field equations are solved by assuming harmonic wave solutions. A closed form solution can be obtained for equations governing the fluid body, but due to the variability of the coefficients of resulting differential equations of the solid body, such a closed form solution is not possible to obtain. For that reason, equations for the solid body and the boundary conditions are treated numerically by the finite-difference method to obtain the effects of the thickness of the tube on the wave characteristics. Dispersion relation is obtained using the long wave approximation and, the wave velocities and the transmission coefficients are computed.     

Soret and Dufour effects on MHD slip flow with thermal radiation over a porous rotating infinite disk

In this investigation, thermal radiation effect over an electrically conducting, Newtonian fluid in a steady laminar magnetohydrodynamic convective flow over a porous rotating infinite disk with the consideration of heat and mass transfer in the presence of Soret and Dufour diffusion effects is investigated. The partial differential equations governing the problem under consideration are transformed by a similarity transformation into a system of ordinary differential equations which are solved numerically using fourth order Runge–Kutta based shooting method. The effects of the magnetic interaction parameter, slip flow parameter, Soret number, Dufour number, Schmidt number, radiation parameter, Prandtl number and suction parameter on the fluid velocity, temperature and concentration distributions in the regime are depicted graphically and are analyzed in detail. The corresponding skin-friction coefficients, the Nusselt number and the Sherwood number are also calculated and displayed in tables showing the effects of various parameters on them.     

Channel flow of a Maxwell fluid with chemical reaction

This work is concerned with the two-dimensional boundary layer flow of an upper-convected Maxwell (UCM) fluid in a channel with chemical reaction. The walls of the channel are porous. Employing similarity transformations the governing non-linear partial differential equations are reduced into non-linear ordinary differential equations. The resulting ordinary differential equations are solved analytically using homotopy analysis method (HAM). Expressions for series solutions are derived. The convergence of the obtained series solutions are shown explicitly. The effects of Reynold’s number Re, Deborah number De, Schmidt number Sc and chemical reaction parameter γ on the velocity and the concentration fields are shown through graphs and discussed.     

Creeping flow analysis of slightly non-Newtonian fluid in a uniformly porous slit

This paper provides the analysis of the steady, creeping flow of a special class of slightly viscoelastic, incompressible fluid through a slit having porous walls with uniform porosity. The governing two dimensional flow equations along with non-homogeneous boundary conditions are non-dimensionalized. Recursive approach is used to solve the resulting equations. Expressions for stream function, velocity components, volumetric flow rate, pressure distribution, shear and normal stresses in general and on the walls of the slit, fractional absorption and leakage flux are derived. Points of maximum velocity components are also identified. A graphical study is carried out to show the effect of porosity and non-Newtonian parameter on above mentioned resulting expressions. It is observed that axial velocity of the fluid decreases with the increase in porosity and non-Newtonian parameter. The outcome of this theoretical study has significant importance both in industry and biosciences.     

Analyzing of the effect of the dusty fluid,anisotropy and layered of the wall on the wave propagation

This study considers the propagation of time harmonic waves in, prestressed, anisotropic elastic tubes filled with viscous fluid containing dusty particles. The fluid is assumed to be incompressible and Newtonian. The tube material is considered to be incompressible, anisotropic, and elastic. The tube is subjected to a static inner pressure P_i and an axial stretch λ. Utilizing the theory of “Superposing small deformations on large initial static deformations”, differential equations governing wave propagation inside the tube are obtained in terms of cylindrical coordinates. Analytical solutions for the equations of motion for the dust and the fluid are obtained, and expressed numerically. The dispersion relation is obtained as a function of the stretch, the thickness ratio and the parameters for dusty particles.     

Hydromagnetic stability of plane Couette flow of an upper convected Maxwell fluid

Hydrodynamic stability of plane Couette flow of an upper convectedMaxwell fluid is investigated in presence of a transverse magneticfield assuming that the magnetic Prandtl number is sufficientlysmall. The resulting equation is a modified Orr–Sommerfeldequation. The equations of stability are solved numericallyusing Chebyshev collocation method with QZ algorithm. The criticalvalues of Reynolds number, wave number and wave speed are computedand the results are shown through the neutral curves. By increasingthe amount of elasticity to a certain value, it is shown that,as the Hartmann number increases, the minimum critical Reynoldsnumber decreases and it does not increase again in contrastto the Newtonian case.