An immersed boundary method for the incompressible Navier–Stokes equations in complex geometry

A nodally exact convection–diffusion–reaction scheme developed in Cartesian grids is applied to solve the flow equations in irregular domains within the framework of immersed boundary (IB) method. The artificial momentum forcing term applied at certain points in the flow and inside the body of any shape allows the imposition of no‐slip velocity condition to account for the body of complex boundary. Development of an interpolation scheme that can accurately lead to no‐slip velocity condition along the IB is essential since Cartesian grid lines generally do not coincide with the IB. The results simulated from the proposed IB method agree well with other numerical and experimental results for several chosen benchmark problems. The accuracy and fidelity of the IB flow solver to predict flows with irregular IBs are therefore demonstrated. Copyright © 2007 John Wiley & Sons, Ltd.     

On the capability of the curvilinear immersed boundary method in predicting near-wall turbulence of turbulent channel flows

The immersed boundary method has been widely used for simulating flows over complex geometries.However, its accuracy in predicting the statistics of near-wall turbulence has not been fully tested. In this work, we evaluate the capability of the curvilinear immersed boundary(CURVIB) method in predicting near-wall velocity and pressure fluctuations in turbulent channel flows. Simulation results show that quantities including the time-averaged streamwise velocity, the rms(root-mean-square) of velocity fluctuations, the rms of vorticity fluctuations, the shear stresses, and the correlation coefficients of u and v computed from the CURVIB simulations are in good agreement with those from the body-fitted simulations. More importantly, it is found that the time-averaged pressure, the rms and wavenumber-frequency spectra of pressure fluctuations computed using the CURVIB method agree well with the body-fitted results.     

A ghost-cell immersed boundary method for large eddy simulation of flows in complex geometries

An efficient ghost-cell immersed boundary (IB) method is proposed for large eddy simulations of three-dimensional incompressible flow in complex geometries. In the framework of finite volume method, the Navier–Stokes equations are integrated using an explicit time advancement scheme on a collocated mesh. Since the IB method is known to generate an unphysical velocity field inside the IB that violates the mass conservation of the cells near the IB, a new IB treatment is devised to eliminate the unphysical velocity generated near the IB and to improve the pressure distribution on the body surface. To validate the proposed method, both laminar and turbulent flow cases are presented. In particular, large eddy simulations were performed to simulate the turbulent flows over a circular cylinder and a sphere at subcritical Reynolds numbers. The computed results show good agreements with the published numerical and experimental data.     

An immersed boundary-lattice Boltzmann flux solver and its applications to fluid–structure interaction problems

An immersed boundary-lattice Boltzmann flux solver (IB–LBFS) for the simulation of two-dimensional fluid–structure interaction (FSI) problems is presented in this paper. The IB–LBFS applies the fractional-step method to split the overall solution process into the predictor step and the corrector step. In the predictor step, the intermediate flow field is predicted by applying the LBFS (lattice Boltzmann flux solver) without considering the presence of immersed object. The LBFS applies the finite volume method to solve N–S (Navier–Stokes) equations for the flow variables at cell centers. At each cell interface, the LBFS evaluates its viscous and inviscid fluxes simultaneously through local reconstruction of the LBE (lattice Boltzmann equation) solutions. In the corrector step, the intermediate flow field is corrected by the implicit boundary condition-enforced immersed boundary method (IBM) so that the no-slip boundary conditions can be accurately satisfied. The IB–LBFS effectively combines the advantages of the LBFS in solving the flow field and the flexibility of the IBM in dealing with boundary conditions. Consequently, the IB–LBFS presents a much simpler and more effective approach for simulating complex FSI problems on non-uniform grids. Several test cases, including flows past one and two cylinders with prescribed motions, are firstly simulated to examine the accuracy of present solver. After that, two strongly coupled fluid–structure interaction problems, i.e., particle sedimentations and vortex-induced vibrations of a circular cylinder are investigated. Good agreements between the present results and those in literature verify the capability and flexibility of IB–LBFS for simulating FSI problems.     

Simulation of three‐dimensional flows over moving objects by an improved immersed boundary–lattice Boltzmann method

An improved immersed boundary–lattice Boltzmann method (IB–LBM) developed recently [28] was applied in this work to simulate three‐dimensional (3D) flows over moving objects. By enforcing the non‐slip boundary condition, the method could avoid any flow penetration to the wall. In the developed IB–LBM solver, the flow field is obtained on the non‐uniform mesh by the efficient LBM that is based on the second‐order one‐dimensional interpolation. As a consequence, its coefficients could be computed simply. By simulating flows over a stationary sphere and torus [28] accurately and efficiently, the proposed IB–LBM showed its ability to handle 3D flow problems with curved boundaries. In this paper, we further applied this method to simulate 3D flows around moving boundaries. As a first example, the flow over a rotating sphere was simulated. The obtained results agreed very well with the previous data in the literature. Then, simulation of flow over a rotating torus was conducted. The capability of the improved IB–LBM for solving 3D flows over moving objects with complex geometries was demonstrated via the simulations of fish swimming and dragonfly flight. The numerical results displayed quantitative and qualitative agreement with the date in the literature. Copyright © 2011 John Wiley & Sons, Ltd.     

A comparative study of lattice Boltzmann methods using bounce‐back schemes and immersed boundary ones for flow acoustic problems

In order to find applicable treatments of moving boundary conditions based on the lattice Boltzmann method in flow acoustic problems, three bounce‐back (BB) methods and four kinds of immersed boundary (IB) methods are compared. We focused on fluid–solid boundary conditions for flow acoustic problems especially the simulations of sound waves from moving boundaries. BB methods include link bounce‐back, interpolation bounce‐back and unified interpolation bounce‐back methods. Five IB methods are explicit and implicit direct‐forcing (Explicit‐IB and Implicit‐IB), two kinds of partially saturated computational methods and ghost fluid method. In order to reduce the spurious pressure generated by the fresh grid node changing from solid domain to fluid domain for BB methods and sharp IB methods, we proposed two new kinds of treatments and compared them with two existing ones. Simulations of the benchmark problems prove that the local evolutionary iteration (LI) is the best one in treatments of the fresh nodes. In addition, for standing boundary problems, although BB methods have a little higher accuracy, all the methods have similar accuracy. However, for moving boundary problems, IB methods are more appropriate than BB methods, because IB methods' smooth interpolation of pressure eld produces less disturbing spurious pressure waves. With improved treatments of fresh nodes, BB methods are also acceptable for moving boundary acoustic problems. In comparative tests in respective type, unified interpolation bounce‐back with LI, Implicit‐IB, and ghost fluid with LI are the best choices. Copyright © 2013 John Wiley & Sons, Ltd.     

Large eddy simulations of wall‐bounded flows using a simplified immersed boundary method and high‐order compact schemes

This paper presents a solution algorithm based on an immersed boundary (IB) method that can be easily implemented in high‐order codes for incompressible flows. The time integration is performed using a predictor‐corrector approach, and the projection method is used for pressure‐velocity coupling. Spatial discretization is based on compact difference schemes and is performed on half‐staggered meshes. A basic algorithm for body‐fitted meshes using the aforementioned solution method was developed by A. Tyliszczak (see article “A high‐order compact difference algorithm for half‐staggered grids for laminar and turbulent incompressible flows” in Journal of Computational Physics) and proved to be very accurate. In this paper, the formulated algorithm is adapted for use with the IB method in the framework of large eddy simulations. The IB method is implemented using its simplified variant without the interpolation (stepwise approach). The computations are performed for a laminar flow around a 2D cylinder, a turbulent flow in a channel with a wavy wall, and around a sphere. Comparisons with literature data confirm that the proposed method can be successfully applied for complex flow problems. The results are verified using the classical approach with body‐fitted meshes and show very good agreement both in laminar and turbulent regimes. The mean (velocity and turbulent kinetic energy profiles and drag coefficients) and time‐dependent (Strouhal number based on the drag coefficient) quantities are analyzed, and they agree well with reference solutions. Two subfilter models are compared, ie, the model of Vreman (see article “An eddy‐viscosity subgrid‐scale model for turbulent shear flow: algebraic theory and applications” in Physics and Fluids) and σ model (Nicoud et al, see article “Using singular values to build a subgrid‐scale model for large eddy simulations” in Physics and Fluids). The tests did not reveal evident advantages of any of these models, and from the point of view of solution accuracy, the quality of the computational meshes turned out to be much more important than the subfilter modeling.     

High-order ghost-point immersed boundary method for viscous compressible flows based on summation-by-parts operators

A high-order immersed boundary method is devised for the compressible Navier-Stokes equations by employing high-order summation-by-parts difference operators. The immersed boundaries are treated as sharp interfaces by enforcing the solid wall boundary conditions via flow variables at ghost points. Two different interpolation schemes are tested to compute values at the ghost points and a hybrid treatment is used. The first method provides the bilinearly interpolated flow variables at the image points of the corresponding ghost points and the second method applies the boundary condition at the immersed boundary by using the weighted least squares method with high-order polynomials. The approach is verified and validated for compressible flow past a circular cylinder at moderate Reynolds numbers. The tonal sound generated by vortex shedding from a circular cylinder is also investigated. In order to demonstrate the capability of the solver to handle complex geometries in practical cases, flow in a cross-section of a human upper airway is simulated.     

High‐order stable interpolations for immersed boundary methods

The analysis and improvement of an immersed boundary method (IBM) for simulating turbulent flows over complex geometries are presented. Direct forcing is employed. It consists in interpolating boundary conditions from the solid body to the Cartesian mesh on which the computation is performed. Lagrange and least squares high‐order interpolations are considered. The direct forcing IBM is implemented in an incompressible finite volume Navier–Stokes solver for direct numerical simulations (DNS) and large eddy simulations (LES) on staggered grids. An algorithm to identify the body and construct the interpolation schemes for arbitrarily complex geometries consisting of triangular elements is presented. A matrix stability analysis of both interpolation schemes demonstrates the superiority of least squares interpolation over Lagrange interpolation in terms of stability. Preservation of time and space accuracy of the original solver is proven with the laminar two‐dimensional Taylor–Couette flow. Finally, practicability of the method for simulating complex flows is demonstrated with the computation of the fully turbulent three‐dimensional flow in an air‐conditioning exhaust pipe. Copyright © 2006 John Wiley & Sons, Ltd.     

A direct‐forcing pressure‐based lattice Boltzmann method for solving fluid–particle interaction problems

A direct‐forcing immersed boundary‐lattice Boltzmann method (IB–LBM) is developed to simulate fluid–particle interaction problems. This method uses the pressure‐based LBM to solve the incompressible flow field and the immersed boundary method to handle the fluid–particle interactions. The pressure‐based LBM uses the pressure distribution functions instead of the density distribution functions as the independent dynamic variables. The main idea is to explicitly eliminate the compressible effect due to the density fluctuation. In the IB method, a direct‐forcing method is introduced to capture the particle motion. It directly computes an IB force density at each lattice grid from the differences between the pressure distribution functions obtained by the LBM and the equilibrium pressure distribution functions computed from the particle velocity. By applying this direct‐forcing method, the IB–LBM becomes a purely LBM version. Also, by applying the Gauss theorem, the formulas for computing the force and the torque acting on the particle from the flows are derived from the volume integrals over the particle volume instead of from the surface integrals over the particle surface. The order of accuracy of the IB–LBM is demonstrated on the errors of velocity field, wall stress, and gradients of velocity and pressure. As a demonstration of the efficiency and capabilities of the new method, sedimentation of a large number of spherical particles in an enclosure is simulated. Copyright © 2010 John Wiley & Sons, Ltd.     

Semi‐coupled air/water immersed boundary approach for curvilinear dynamic overset grids with application to ship hydrodynamics

For many problems in ship hydrodynamics, the effects of air flow on the water flow are negligible (the frequently called free surface conditions), but the air flow around the ship is still of interest. A method is presented where the water flow is decoupled from the air solution, but the air flow uses the unsteady water flow as a boundary condition. The authors call this a semi‐coupled air/water flow approach. The method can be divided into two steps. At each time step the free surface water flow is computed first with a single‐phase method assuming constant pressure and zero stress on the interface. The second step is to compute the air flow assuming the free surface as a moving immersed boundary (IB). The IB method developed for Cartesian grids (Annu. Rev. Fluid Mech. 2005; 37 :239–261) is extended to curvilinear grids, where no‐slip and continuity conditions are used to enforce velocity and pressure boundary conditions for the air flow. The forcing points close to the IB can be computed and corrected under a sharp interface condition, which makes the computation very stable. The overset implementation is similar to that of the single‐phase solver (Comput. Fluids 2007; 36 :1415–1433), with the difference that points in water are set as IB points even if they are fringe points. Pressure–velocity coupling through pressure implicit with splitting of operators or projection methods is used for water computations, and a projection method is used for the air. The method on each fluid is a single‐phase method, thus avoiding ill‐conditioned numerical systems caused by large differences of fluid properties between air and water. The computation is only slightly slower than the single‐phase version, with complete absence of spurious velocity oscillations near the free surface, frequently present in fully coupled approaches. Validations are performed for laminar Couette flow over a wavy boundary by comparing with the analytical solution, and for the surface combatant model David Taylor Model Basin (DTMB) 5512 by comparing with Experimental Fluid Dynamics (EFD) and the results of two‐phase level set computations. Complex flow computations are demonstrated for the ONR Tumblehome DTMB 5613 with superstructure subject to waves and wind, including 6DOF motions and broaching in SS7 irregular waves and wind. Copyright © 2008 John Wiley & Sons, Ltd.     

A sharp‐interface immersed boundary framework for simulations of high‐speed inviscid compressible flows

A new finite‐volume flow solver based on the hybrid Cartesian immersed boundary (IB) framework is developed for the solution of high‐speed inviscid compressible flows. The IB method adopts a sharp‐interface approach, wherein the boundary conditions are enforced on the body geometry itself. A key component of the present solver is a novel reconstruction approach, in conjunction with inverse distance weighting, to compute the solutions in the vicinity of the solid‐fluid interface. We show that proposed reconstruction leads to second‐order spatial accuracy while also ensuring that the discrete conservation errors diminish linearly with grid refinement. Investigations of supersonic and hypersonic inviscid flows over different geometries are carried out for an extensive validation of the proposed flow solver. Studies on cylinder lift‐off and shape optimisation in supersonic flows further demonstrate the efficacy of the flow solver for computations with moving and shape‐changing geometries. These studies conclusively highlight the capability of the proposed IB methodology as a promising alternative for robust and accurate computations of compressible fluid flows on nonconformal Cartesian meshes.     

An immersed boundary solver for inviscid compressible flows

In this paper, a simple and efficient immersed boundary (IB) method is developed for the numerical simulation of inviscid compressible Euler equations. We propose a method based on coordinate transformation to calculate the unknowns of ghost points. In the present study, the body‐grid intercept points are used to build a complete bilinear (2‐D)/trilinear (3‐D) interpolation. A third‐order weighted essentially nonoscillation scheme with a new reference smoothness indicator is proposed to improve the accuracy at the extrema and discontinuity region. The dynamic blocked structured adaptive mesh is used to enhance the computational efficiency. The parallel computation with loading balance is applied to save the computational cost for 3‐D problems. Numerical tests show that the present method has second‐order overall spatial accuracy. The double Mach reflection test indicates that the present IB method gives almost identical solution as that of the boundary‐fitted method. The accuracy of the solver is further validated by subsonic and transonic flow past NACA2012 airfoil. Finally, the present IB method with adaptive mesh is validated by simulation of transonic flow past 3‐D ONERA M6 Wing. Global agreement with experimental and other numerical results are obtained.     

Simulation of three-dimensional incompressible flows in generalized curvilinear coordinates using a high-order compact finite-difference lattice Boltzmann method

In the present study, a high-order compact finite-difference lattice Boltzmann method is applied for accurately computing 3-D incompressible flows in the generalized curvilinear coordinates to handle practical and realistic geometries with curved boundaries and nonuniform grids. The incompressible form of the 3-D nineteen discrete velocity lattice Boltzmann method is transformed into the generalized curvilinear coordinates. Herein, a fourth-order compact finite-difference scheme and a fourth-order Runge-Kutta scheme are used for the discretization of the spatial derivatives and the temporal term, respectively, in the resulting 3-D nineteen discrete velocity lattice Boltzmann equation to provide an accurate 3-D incompressible flow solver. A high-order spectral-type low-pass compact filtering technique is applied to have a stable solution. All boundary conditions are implemented based on the solution of the governing equations in the 3-D generalized curvilinear coordinates. Numerical solutions of different 3-D benchmark and practical incompressible flow problems are performed to demonstrate the accuracy and performance of the solution methodology presented. Herein, the 2-D cylindrical Couette flow, the decay of a 3-D double shear wave, the cubic lid-driven cavity flow with nonuniform grids, the flow through a square duct with 90° bend and the flow past a sphere at different flow conditions are considered for validating the present computations. Numerical results obtained show the accuracy and robustness of the present solution methodology based on the implementation of the high-order compact finite-difference lattice Boltzman method in the generalized curvilinear coordinates for solving 3-D incompressible flows over practical and realistic geometries.     

基于滑移速度壁模型的复杂边界湍流大涡模拟

采用滑移速度壁模型实现了浸入边界方法与壁模型相结合的大涡模拟.本文首先分别采用平衡层模型和非平衡壁模型对周期山状流进行数值模拟,以考查在壁模型中考虑切向压力梯度的作用.数值结果表明,流场的压力对本文所采用的壁模型形式并不敏感,但是考虑切向压力梯度可以显著改进壁面摩擦力的计算结果,并且能够准确的预测强压力梯度区以及分离区内的流动平均统计特性.不考虑压力梯度效应的平衡层模型显著低估了壁面摩擦力的分布,同时无法准确预测分离区内的平均速度剖面.非平衡模型的修正项正比于切向压力梯度和壁面法向距离,因此在强压力梯度区或者网格较粗时,计算得到的平均压力和摩擦力分布以及流动的低阶统计量均与参考的实验和计算结果吻合.在此基础上,通过回转体绕流的大涡模拟考查了该方法用于模拟高雷诺数壁湍流的适用性,非平衡壁模型可以准确地捕捉流动的物理结构并较准确地预测其水动力学特性.结果表明,将浸入边界方法与非平衡滑移速度壁模型相结合的大涡模拟,有望成为数值模拟复杂边界高雷诺数壁湍流的工具.      

A finite element immersed boundary method for fluid flow around rigid objects

This paper proposes a new immersed boundary (IB) method for solving fluid flow problems in the presence of rigid objects which are not represented by the mesh. Solving the flow around objects with complex shapes may involve extensive meshing work that has to be repeated each time a change in the geometry is needed. Important benefit would be reached if we are able to solve the flow without the need of generating a mesh that fits the shape of the immersed objects. This work presents a finite element IB method using a discretization covering the entire domain of interest, including the volume occupied by immersed objects, and which produces solutions of the flow satisfying accurately the boundary conditions at the surface of immersed bodies. In other words the finite element solution represents accurately the presence of immersed bodies while the mesh does not. This is done by including additional degrees of freedom on interface cut elements which are then eliminated at element level. The boundary of immersed objects is defined using a level set function. Solutions are shown for various flow problems and the accuracy of the present approach is measured with respect to solutions obtained on body‐fitted meshes. Copyright © 2010 Crown in the right of Canada.     

Comparison of body‐fitted,embedded and immersed solutions of low Reynolds‐number 3‐D incompressible flows

The solutions obtained for low Reynolds‐number incompressible flows using the same flow solver and solution technique on body‐fitted, embedded surface and immersed body grids of similar size are compared. The cases considered are a sphere at Re = 100 and an idealized stented aneurysm. It is found that the solutions using all these techniques converge to the same grid‐independent solution. On coarser grids, the effect of higher‐order boundary conditions is noticeable. Therefore, if the manual labor required to set up a body‐fitted domain is excessive (as is often the case for patient‐specific geometries with medical devices), and/or computing resources are plentiful, the embedded surface and immersed body approaches become very attractive options. Copyright © 2007 John Wiley & Sons, Ltd.     

Direct-forcing immersed boundary lattice Boltzmann simulation of particle/fluid interactions for spherical and non-spherical particles

The lattice Boltzmann method (LBM) is a useful technique for simulating multiphase flows and modeling complex physics. Specifically, we use LBM combined with a direct-forcing (DF) immersed boundary (IB) method to simulate fluid–particle interactions in two-phase particulate flows. Two grids are used in the simulation: a fixed uniform Eulerian grid for the fluid phase and a Lagrangian grid that is attached to and moves with the immersed particles. Forces are calculated at each Lagrangian point. To exchange numerical information between the two grids, discrete delta functions are used. The resulting DF IB-LBM approach is then successfully applied to a variety of reference flows, namely the sedimentation of one and two circular particles in a vertical channel, the sedimentation of one or two spheres in an enclosure, and a neutrally buoyant prolate spheroid in a Couette flow. This last application proves that the developed approach can be used also for non-spherical particles. The three forcing schemes and the different factors affecting the simulation (added mass effect, corrected radius) are also discussed.     

Immersed boundary method for unsteady kinetic model equations

Predicting unsteady flows and aerodynamic forces for large displacement motion of microstructures requires transient solution of Boltzmann equation with moving boundaries. For the inclusion of moving complex boundaries for these problems, three immersed boundary method flux formulations (interpolation, relaxation, and interrelaxation) are presented. These formulations are implemented in a 2‐D finite volume method solver for ellipsoidal‐statistical (ES)‐Bhatnagar‐Gross‐Krook (BGK) equations using unstructured meshes. For the verification, a transient analytical solution for free molecular 1‐D flow is derived, and results are compared with the immersed boundary (IB)‐ES‐BGK methods. In 2‐D, methods are verified with the conformal, non‐moving finite volume method, and it is shown that the interrelaxation flux formulation gives an error less than the interpolation and relaxation methods for a given mesh size. Furthermore, formulations applied to a thermally induced flow for a heated beam near a cold substrate show that interrelaxation formulation gives more accurate solution in terms of heat flux. As a 2‐D unsteady application, IB/ES‐BGK methods are used to determine flow properties and damping forces for impulsive motion of microbeam due to high inertial forces. IB/ES‐BGK methods are compared with Navier–Stokes solution at low Knudsen numbers, and it is shown that velocity slip in the transitional rarefied regime reduces the unsteady damping force. Copyright © 2015 John Wiley & Sons, Ltd.     

Intercomparison of boundary schemes in Lattice Boltzmann method for flow simulation in porous media

The Lattice Boltzmann method has been widely adopted to simulate flow in porous media. The choice of appropriate boundary schemes is essential to achieve simulation accuracy; however, the criteria for the most suitable boundary treatment in the simulation of flow in porous media flow remain unresolved. Here, three types of the most commonly used boundary conditions are tested: interpolation bounce back (IBB), partial saturated method (PSM), and immersed boundary method (IBM). The dimensionless drag of face-centered cubic (FCC) sphere array and the dimensionless permeability of a random closely packed (RCP) sphere array are calculated and compared at different viscosities and resolutions. In the FCC sphere array case where spheres are not contacted, the IBB and PSM exhibit the same accuracy and both are of the second-order convergence rate. The IBM is less accurate and is of the first-order convergence rate. In the RCP sphere array case where the spheres are contacted, the IBB shows finer results and a second-order convergence rate. PSM underestimates the dimensionless permeability and increases resolution only slightly improved the results of PSM. The IBM overestimates the dimensionless permeability. These results indicate that among the three methods, the IBB is the most accurate. The PSM has the same accuracy as the IBB when sediments are not contacted; however, it loses its accuracy in the simulation of flow in closely packed porous media. This work could serve as a benchmark for further research in choosing the most appropriate method in the simulation of flow in porous media.